From: Abhishek Ambure <[email protected]>
For all data packets trasmmited, host gets htt tx completion event.
QCA9984 firmware gives data ack rssi values to host through
htt event of data tx completion. Data ack rssi values are valid
if A0 bit is set in HTT rx message.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044
Signed-off-by: Abhishek Ambure <[email protected]>
Signed-off-by: Balaji Pothunoori <[email protected]>
---
drivers/net/wireless/ath/ath10k/hw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index ad082b7..303f17d 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -1145,6 +1145,7 @@ static bool ath10k_qca99x0_rx_desc_msdu_limit_error(struct htt_rx_desc *rxd)
const struct ath10k_hw_ops qca99x0_ops = {
.rx_desc_get_l3_pad_bytes = ath10k_qca99x0_rx_desc_get_l3_pad_bytes,
.rx_desc_get_msdu_limit_error = ath10k_qca99x0_rx_desc_msdu_limit_error,
+ .is_rssi_enable = ath10k_htt_tx_rssi_enable,
};
const struct ath10k_hw_ops qca6174_ops = {
--
2.7.4
Balaji Pothunoori <[email protected]> wrote:
> For all data packets transmitted, host gets htt tx completion event. Some QCA9984
> firmware releases support WMI_SERVICE_TX_DATA_ACK_RSSI, which gives data
> ack rssi values to host through htt event of data tx completion. Data ack rssi
> values are valid if A0 bit is set in HTT rx message. So enable the feature also
> for QCA9884.
>
> Tested HW: QCA9984
> Tested FW: 10.4-3.9.0.2-00044
>
> Signed-off-by: Abhishek Ambure <[email protected]>
> Signed-off-by: Balaji Pothunoori <[email protected]>
> [[email protected]: improve commit log]
> Signed-off-by: Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
cc78dc3b7906 ath10k: enable transmit data ack RSSI for QCA9884
--
https://patchwork.kernel.org/patch/11021495/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches