Fix IRAM start address in coredump.
Tested on: QCA9984, QCA4019
FW version: 10.4-3.9.0.2-00044
Signed-off-by: Anilkumar Kolli <[email protected]>
---
drivers/net/wireless/ath/ath10k/coredump.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c
index b6d2932383cf..ecd3dd5d8356 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.c
+++ b/drivers/net/wireless/ath/ath10k/coredump.c
@@ -703,7 +703,7 @@
},
{
.type = ATH10K_MEM_REGION_TYPE_REG,
- .start = 0x98000,
+ .start = 0x980000,
.len = 0x50000,
.name = "IRAM",
.section_table = {
@@ -786,7 +786,7 @@
},
{
.type = ATH10K_MEM_REGION_TYPE_REG,
- .start = 0x98000,
+ .start = 0x980000,
.len = 0x50000,
.name = "IRAM",
.section_table = {
@@ -891,7 +891,7 @@
},
{
.type = ATH10K_MEM_REGION_TYPE_REG,
- .start = 0x98000,
+ .start = 0x980000,
.len = 0x50000,
.name = "IRAM",
.section_table = {
--
1.7.9.5
In a multiradio board with one QCA9984 and one AR9987
after enabling the crashdump with module parameter
coredump_mask=7, below backtrace is seen.
vmalloc: allocation failure: 0 bytes
kworker/u4:0: page allocation failure: order:0, mode:0x80d2
CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.77 #130
Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
(unwind_backtrace) from [<c021abf8>] (show_stack+0x10/0x14)
(dump_stack+0x80/0xa0)
(warn_alloc_failed+0xd0/0xfc)
(__vmalloc_node_range+0x1b4/0x1d8)
(__vmalloc_node+0x34/0x40)
(vzalloc+0x24/0x30)
(ath10k_coredump_register+0x6c/0x88 [ath10k_core])
(ath10k_core_register_work+0x350/0xb34 [ath10k_core])
(process_one_work+0x20c/0x32c)
(worker_thread+0x228/0x360)
This is due to ath10k_hw_mem_layout is not defined for AR9987.
For coredump undefined hw ramdump_size is 0.
Check for the ramdump_size before allocation memory.
Tested on: AR9987, QCA9984
FW version: 10.4-3.9.0.2-00044
Signed-off-by: Anilkumar Kolli <[email protected]>
---
drivers/net/wireless/ath/ath10k/coredump.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c
index ecd3dd5d8356..a127122b4721 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.c
+++ b/drivers/net/wireless/ath/ath10k/coredump.c
@@ -1208,9 +1208,11 @@ static struct ath10k_dump_file_data *ath10k_coredump_build(struct ath10k *ar)
dump_tlv = (struct ath10k_tlv_dump_data *)(buf + sofar);
dump_tlv->type = cpu_to_le32(ATH10K_FW_CRASH_DUMP_RAM_DATA);
dump_tlv->tlv_len = cpu_to_le32(crash_data->ramdump_buf_len);
- memcpy(dump_tlv->tlv_data, crash_data->ramdump_buf,
- crash_data->ramdump_buf_len);
- sofar += sizeof(*dump_tlv) + crash_data->ramdump_buf_len;
+ if (crash_data->ramdump_buf_len) {
+ memcpy(dump_tlv->tlv_data, crash_data->ramdump_buf,
+ crash_data->ramdump_buf_len);
+ sofar += sizeof(*dump_tlv) + crash_data->ramdump_buf_len;
+ }
}
mutex_unlock(&ar->dump_mutex);
@@ -1257,6 +1259,9 @@ int ath10k_coredump_register(struct ath10k *ar)
if (test_bit(ATH10K_FW_CRASH_DUMP_RAM_DATA, &ath10k_coredump_mask)) {
crash_data->ramdump_buf_len = ath10k_coredump_get_ramdump_size(ar);
+ if (!crash_data->ramdump_buf_len)
+ return 0;
+
crash_data->ramdump_buf = vzalloc(crash_data->ramdump_buf_len);
if (!crash_data->ramdump_buf)
return -ENOMEM;
--
1.7.9.5
Anilkumar Kolli <[email protected]> wrote:
> The IRAM start address in coredump was wrong for QCA9984, QCA4019, QCA9888 and
> QCA99x0.
>
> Tested on: QCA9984, QCA4019
> FW version: 10.4-3.9.0.2-00044
>
> Signed-off-by: Anilkumar Kolli <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>
2 patches applied to ath-next branch of ath.git, thanks.
93f9fefcf528 ath10k: coredump: fix IRAM addr for QCA9984, QCA4019, QCA9888 and QCA99x0
d98ddae85a4a ath10k: fix backtrace on coredump
--
https://patchwork.kernel.org/patch/11162763/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches