From: Joseph Chuang <[email protected]>
P2P group formation fails since either peer is not able to send go-neg
confirm or dut is not able to send go-neg response. To fix this, retry
limit should be increased and dwell time check should be added.
Signed-off-by: Joseph Chuang <[email protected]>
---
.../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 28 ++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index 521b507..cb8e229 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -60,7 +60,7 @@
#define P2P_AF_MIN_DWELL_TIME 100
#define P2P_AF_MED_DWELL_TIME 400
#define P2P_AF_LONG_DWELL_TIME 1000
-#define P2P_AF_TX_MAX_RETRY 1
+#define P2P_AF_TX_MAX_RETRY 5
#define P2P_AF_MAX_WAIT_TIME msecs_to_jiffies(2000)
#define P2P_INVALID_CHANNEL -1
#define P2P_CHANNEL_SYNC_RETRY 5
@@ -93,6 +93,9 @@
#define P2PSD_ACTION_ID_GAS_CRESP 0x0d /* GAS Comback Response AF */
#define BRCMF_P2P_DISABLE_TIMEOUT msecs_to_jiffies(500)
+
+/* Mask for retry counter of custom dwell time */
+#define CUSTOM_RETRY_MASK 0xff000000
/**
* struct brcmf_p2p_disc_st_le - set discovery state in firmware.
*
@@ -1645,6 +1648,17 @@ static s32 brcmf_p2p_pub_af_tx(struct brcmf_cfg80211_info *cfg,
return err;
}
+static bool brcmf_p2p_check_dwell_overflow(s32 requested_dwell,
+ unsigned long dwell_jiffies)
+{
+ if ((requested_dwell & CUSTOM_RETRY_MASK) &&
+ (jiffies_to_msecs(jiffies - dwell_jiffies) >
+ (requested_dwell & ~CUSTOM_RETRY_MASK))) {
+ brcmf_err("Action frame TX retry time over dwell time!\n");
+ return true;
+ }
+ return false;
+}
/**
* brcmf_p2p_send_action_frame() - send action frame .
*
@@ -1669,6 +1683,10 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg,
s32 tx_retry;
s32 extra_listen_time;
uint delta_ms;
+ unsigned long dwell_jiffies = 0;
+ bool dwell_overflow = false;
+
+ s32 requested_dwell = af_params->dwell_time;
action_frame = &af_params->action_frame;
action_frame_len = le16_to_cpu(action_frame->len);
@@ -1780,12 +1798,18 @@ bool brcmf_p2p_send_action_frame(struct brcmf_cfg80211_info *cfg,
/* update channel */
af_params->channel = cpu_to_le32(afx_hdl->peer_chan);
}
+ dwell_jiffies = jiffies;
+ dwell_overflow = brcmf_p2p_check_dwell_overflow(requested_dwell,
+ dwell_jiffies);
tx_retry = 0;
while (!p2p->block_gon_req_tx &&
- (ack == false) && (tx_retry < P2P_AF_TX_MAX_RETRY)) {
+ (!ack) && (tx_retry < P2P_AF_TX_MAX_RETRY) &&
+ !dwell_overflow) {
ack = !brcmf_p2p_tx_action_frame(p2p, af_params);
tx_retry++;
+ dwell_overflow = brcmf_p2p_check_dwell_overflow(requested_dwell,
+ dwell_jiffies);
}
if (ack == false) {
bphy_err(drvr, "Failed to send Action Frame(retry %d)\n",
--
2.1.0