2020-11-12 07:45:31

by Maharaja Kennadyrajan

Subject: [PATCH v2 0/3] ath11k: vdev and peer delete synchronization with firmware

When add an interface immediately after removing the interface,
vdev deletion in firmware might not have been completed.
add vdev_delete_resp_event and wait_event_timeout to synchronize
with firmware.

Peer creation in firmware fails if last peer deletion is still in
progress, add wait for the event after deleting every peer from host
driver to synchronize with firmware.

1) add vdev delete resp event and wait event to get ack from firmware
2) add wait event timeout for peer delete to get ack from firmware
3) code clean up and replace the api 'ath11k_mac_get_ar_vdev_stop_status'
with 'ath11k_mac_get_ar_by_vdev_id'

V2: Rebased on latest ath.git TOT - Addressed Kalle's comment.

Ritesh Singh (3):
ath11k: vdev delete synchronization with firmware
ath11k: peer delete synchronization with firmware
ath11k: remove "ath11k_mac_get_ar_vdev_stop_status" references

drivers/net/wireless/ath/ath11k/core.c | 2 +
drivers/net/wireless/ath/ath11k/core.h | 9 ++--
drivers/net/wireless/ath/ath11k/mac.c | 82 ++++++++++++++++------------------
drivers/net/wireless/ath/ath11k/mac.h | 2 -
drivers/net/wireless/ath/ath11k/peer.c | 44 ++++++++++++++++--
drivers/net/wireless/ath/ath11k/peer.h | 2 +
drivers/net/wireless/ath/ath11k/wmi.c | 81 ++++++++++++++++++++++++++++++---
drivers/net/wireless/ath/ath11k/wmi.h | 4 ++
8 files changed, 166 insertions(+), 60 deletions(-)

--
2.7.4

2020-11-16 08:09:29

by Maharaja Kennadyrajan

Subject: Re: [PATCH v2 0/3] ath11k: vdev and peer delete synchronization with firmware

On 2020-11-12 13:12, Maharaja Kennadyrajan wrote:

Hi Kalle,

Kindly ignore this patchset as I didn't mention the version number
in the subject name of the patches in the patchlist.
I will correct this and send v3 patchset.

Regret for the inconvenience caused.


Regards,
Maha


> When add an interface immediately after removing the interface,
> vdev deletion in firmware might not have been completed.
> add vdev_delete_resp_event and wait_event_timeout to synchronize
> with firmware.
>
> Peer creation in firmware fails if last peer deletion is still in
> progress, add wait for the event after deleting every peer from host
> driver to synchronize with firmware.
>
> 1) add vdev delete resp event and wait event to get ack from firmware
> 2) add wait event timeout for peer delete to get ack from firmware
> 3) code clean up and replace the api
> 'ath11k_mac_get_ar_vdev_stop_status'
> with 'ath11k_mac_get_ar_by_vdev_id'
>
> V2: Rebased on latest ath.git TOT - Addressed Kalle's comment.
>
> Ritesh Singh (3):
> ath11k: vdev delete synchronization with firmware
> ath11k: peer delete synchronization with firmware
> ath11k: remove "ath11k_mac_get_ar_vdev_stop_status" references
>
> drivers/net/wireless/ath/ath11k/core.c | 2 +
> drivers/net/wireless/ath/ath11k/core.h | 9 ++--
> drivers/net/wireless/ath/ath11k/mac.c | 82
> ++++++++++++++++------------------
> drivers/net/wireless/ath/ath11k/mac.h | 2 -
> drivers/net/wireless/ath/ath11k/peer.c | 44 ++++++++++++++++--
> drivers/net/wireless/ath/ath11k/peer.h | 2 +
> drivers/net/wireless/ath/ath11k/wmi.c | 81
> ++++++++++++++++++++++++++++++---
> drivers/net/wireless/ath/ath11k/wmi.h | 4 ++
> 8 files changed, 166 insertions(+), 60 deletions(-)