2021-11-18 15:32:53

by Anilkumar Kolli

Subject: [PATCH] ath11k: Use host CE parameters for CE interrupts configuration

CE interrupt configuration uses host ce parameters to assign/free
interrupts. Use host ce parameters to enable/disable interrupts.
This patch fixes below BUG,

BUG: KASAN: global-out-of-bounds in 0xffffffbffdfb035c at addr
ffffffbffde6eeac
Read of size 4 by task kworker/u8:2/132
Address belongs to variable ath11k_core_qmi_firmware_ready+0x1b0/0x5bc [ath11k]

OOB is due to ath11k_ahb_ce_irqs_enable() iterates ce_count(which is 12)
times and accessing 12th element in target_ce_config
(which has only 11 elements) from ath11k_ahb_ce_irq_enable().

With this change host ce configs are used to enable/disable interrupts.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00471-QCAHKSWPL_SILICONZ-1

Fixes: 967c1d1131fa ("ath11k: move target ce configs to hw_params")

Signed-off-by: Anilkumar Kolli <[email protected]>
---
drivers/net/wireless/ath/ath11k/ahb.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 8c9c781afc3e..096c502cce38 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -206,13 +206,13 @@ static void ath11k_ahb_clearbit32(struct ath11k_base *ab, u8 bit, u32 offset)

static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
{
- const struct ce_pipe_config *ce_config;
+ const struct ce_attr *ce_attr;

- ce_config = &ab->hw_params.target_ce_config[ce_id];
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_OUT)
+ ce_attr = &ab->hw_params.host_ce_config[ce_id];
+ if (ce_attr->src_nentries)
ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_ADDRESS);

- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_IN) {
+ if (ce_attr->dest_nentries) {
ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
ath11k_ahb_setbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
CE_HOST_IE_3_ADDRESS);
@@ -221,13 +221,13 @@ static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)

static void ath11k_ahb_ce_irq_disable(struct ath11k_base *ab, u16 ce_id)
{
- const struct ce_pipe_config *ce_config;
+ const struct ce_attr *ce_attr;

- ce_config = &ab->hw_params.target_ce_config[ce_id];
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_OUT)
+ ce_attr = &ab->hw_params.host_ce_config[ce_id];
+ if (ce_attr->src_nentries)
ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_ADDRESS);

- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_IN) {
+ if (ce_attr->dest_nentries) {
ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
ath11k_ahb_clearbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
CE_HOST_IE_3_ADDRESS);
--
2.7.4

2021-11-26 10:21:08

by Kalle Valo

Subject: Re: [PATCH] ath11k: Use host CE parameters for CE interrupts configuration

Anilkumar Kolli <[email protected]> wrote:

> CE interrupt configuration uses host ce parameters to assign/free
> interrupts. Use host ce parameters to enable/disable interrupts.
> This patch fixes below BUG,
>
> BUG: KASAN: global-out-of-bounds in 0xffffffbffdfb035c at addr
> ffffffbffde6eeac
> Read of size 4 by task kworker/u8:2/132
> Address belongs to variable ath11k_core_qmi_firmware_ready+0x1b0/0x5bc [ath11k]
>
> OOB is due to ath11k_ahb_ce_irqs_enable() iterates ce_count(which is 12)
> times and accessing 12th element in target_ce_config
> (which has only 11 elements) from ath11k_ahb_ce_irq_enable().
>
> With this change host ce configs are used to enable/disable interrupts.
>
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00471-QCAHKSWPL_SILICONZ-1
>
> Fixes: 967c1d1131fa ("ath11k: move target ce configs to hw_params")
> Signed-off-by: Anilkumar Kolli <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>

Patch applied to ath-next branch of ath.git, thanks.

b689f091aafd ath11k: Use host CE parameters for CE interrupts configuration

--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches