Sometimes board-2.bin does not have the regdb data which matched the
parameters such as vendor, device, subsystem-vendor, subsystem-device
and etc. Add default regdb data with 'bus=%s' into board-2.bin for
WCN6855, then ath11k use 'bus=pci' to search regdb data in board-2.bin
for WCN6855.
kernel: [ 122.515808] ath11k_pci 0000:03:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262'
kernel: [ 122.517240] ath11k_pci 0000:03:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 6179564
kernel: [ 122.517280] ath11k_pci 0000:03:00.0: failed to fetch regdb data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262 from ath11k/WCN6855/hw2.0/board-2.bin
kernel: [ 122.517464] ath11k_pci 0000:03:00.0: boot using board name 'bus=pci'
kernel: [ 122.518901] ath11k_pci 0000:03:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 6179564
kernel: [ 122.518915] ath11k_pci 0000:03:00.0: board name
kernel: [ 122.518917] ath11k_pci 0000:03:00.0: 00000000: 62 75 73 3d 70 63 69 bus=pci
kernel: [ 122.518918] ath11k_pci 0000:03:00.0: boot found match regdb data for name 'bus=pci'
kernel: [ 122.518920] ath11k_pci 0000:03:00.0: boot found regdb data for 'bus=pci'
kernel: [ 122.518921] ath11k_pci 0000:03:00.0: fetched regdb
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: Wen Gong <[email protected]>
---
drivers/net/wireless/ath/ath11k/core.c | 53 +++++++++++++++++++-------
1 file changed, 40 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index b1b90bd34d67..5648963baeb9 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -961,7 +961,8 @@ int ath11k_core_check_dt(struct ath11k_base *ab)
}
static int __ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
- size_t name_len, bool with_variant)
+ size_t name_len, bool with_variant,
+ bool bus_type_mode)
{
/* strlen(',variant=') + strlen(ab->qmi.target.bdf_ext) */
char variant[9 + ATH11K_QMI_BDF_EXT_STR_LENGTH] = { 0 };
@@ -972,15 +973,20 @@ static int __ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
switch (ab->id.bdf_search) {
case ATH11K_BDF_SEARCH_BUS_AND_BOARD:
- scnprintf(name, name_len,
- "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%d,qmi-board-id=%d%s",
- ath11k_bus_str(ab->hif.bus),
- ab->id.vendor, ab->id.device,
- ab->id.subsystem_vendor,
- ab->id.subsystem_device,
- ab->qmi.target.chip_id,
- ab->qmi.target.board_id,
- variant);
+ if (bus_type_mode)
+ scnprintf(name, name_len,
+ "bus=%s",
+ ath11k_bus_str(ab->hif.bus));
+ else
+ scnprintf(name, name_len,
+ "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x,qmi-chip-id=%d,qmi-board-id=%d%s",
+ ath11k_bus_str(ab->hif.bus),
+ ab->id.vendor, ab->id.device,
+ ab->id.subsystem_vendor,
+ ab->id.subsystem_device,
+ ab->qmi.target.chip_id,
+ ab->qmi.target.board_id,
+ variant);
break;
default:
scnprintf(name, name_len,
@@ -999,13 +1005,19 @@ static int __ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
static int ath11k_core_create_board_name(struct ath11k_base *ab, char *name,
size_t name_len)
{
- return __ath11k_core_create_board_name(ab, name, name_len, true);
+ return __ath11k_core_create_board_name(ab, name, name_len, true, false);
}
static int ath11k_core_create_fallback_board_name(struct ath11k_base *ab, char *name,
size_t name_len)
{
- return __ath11k_core_create_board_name(ab, name, name_len, false);
+ return __ath11k_core_create_board_name(ab, name, name_len, false, false);
+}
+
+static int ath11k_core_create_bus_type_board_name(struct ath11k_base *ab, char *name,
+ size_t name_len)
+{
+ return __ath11k_core_create_board_name(ab, name, name_len, false, true);
}
const struct firmware *ath11k_core_firmware_request(struct ath11k_base *ab,
@@ -1309,7 +1321,7 @@ int ath11k_core_fetch_bdf(struct ath11k_base *ab, struct ath11k_board_data *bd)
int ath11k_core_fetch_regdb(struct ath11k_base *ab, struct ath11k_board_data *bd)
{
- char boardname[BOARD_NAME_SIZE];
+ char boardname[BOARD_NAME_SIZE], default_boardname[BOARD_NAME_SIZE];
int ret;
ret = ath11k_core_create_board_name(ab, boardname, BOARD_NAME_SIZE);
@@ -1326,6 +1338,21 @@ int ath11k_core_fetch_regdb(struct ath11k_base *ab, struct ath11k_board_data *bd
if (!ret)
goto exit;
+ ret = ath11k_core_create_bus_type_board_name(ab, default_boardname,
+ BOARD_NAME_SIZE);
+ if (ret) {
+ ath11k_dbg(ab, ATH11K_DBG_BOOT,
+ "failed to create default board name for regdb: %d", ret);
+ goto exit;
+ }
+
+ ret = ath11k_core_fetch_board_data_api_n(ab, bd, default_boardname,
+ ATH11K_BD_IE_REGDB,
+ ATH11K_BD_IE_REGDB_NAME,
+ ATH11K_BD_IE_REGDB_DATA);
+ if (!ret)
+ goto exit;
+
ret = ath11k_core_fetch_board_data_api_1(ab, bd, ATH11K_REGDB_FILE_NAME);
if (ret)
ath11k_dbg(ab, ATH11K_DBG_BOOT, "failed to fetch %s from %s\n",
base-commit: 0a00db612b6df1fad80485e3642529d1f28ea084
--
2.40.1
Wen Gong <[email protected]> wrote:
> Sometimes board-2.bin does not have the regdb data which matched the
> parameters such as vendor, device, subsystem-vendor, subsystem-device
> and etc. Add default regdb data with 'bus=%s' into board-2.bin for
> WCN6855, then ath11k use 'bus=pci' to search regdb data in board-2.bin
> for WCN6855.
>
> kernel: [ 122.515808] ath11k_pci 0000:03:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262'
> kernel: [ 122.517240] ath11k_pci 0000:03:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 6179564
> kernel: [ 122.517280] ath11k_pci 0000:03:00.0: failed to fetch regdb data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262 from ath11k/WCN6855/hw2.0/board-2.bin
> kernel: [ 122.517464] ath11k_pci 0000:03:00.0: boot using board name 'bus=pci'
> kernel: [ 122.518901] ath11k_pci 0000:03:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 6179564
> kernel: [ 122.518915] ath11k_pci 0000:03:00.0: board name
> kernel: [ 122.518917] ath11k_pci 0000:03:00.0: 00000000: 62 75 73 3d 70 63 69 bus=pci
> kernel: [ 122.518918] ath11k_pci 0000:03:00.0: boot found match regdb data for name 'bus=pci'
> kernel: [ 122.518920] ath11k_pci 0000:03:00.0: boot found regdb data for 'bus=pci'
> kernel: [ 122.518921] ath11k_pci 0000:03:00.0: fetched regdb
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
BTW, the latest firmware version is:
WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
You really should update your firmware, avoid using old firmware releases.
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Wen Gong <[email protected]> wrote:
> Sometimes board-2.bin does not have the regdb data which matched the
> parameters such as vendor, device, subsystem-vendor, subsystem-device
> and etc. Add default regdb data with 'bus=%s' into board-2.bin for
> WCN6855, then ath11k use 'bus=pci' to search regdb data in board-2.bin
> for WCN6855.
>
> kernel: [ 122.515808] ath11k_pci 0000:03:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262'
> kernel: [ 122.517240] ath11k_pci 0000:03:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 6179564
> kernel: [ 122.517280] ath11k_pci 0000:03:00.0: failed to fetch regdb data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262 from ath11k/WCN6855/hw2.0/board-2.bin
> kernel: [ 122.517464] ath11k_pci 0000:03:00.0: boot using board name 'bus=pci'
> kernel: [ 122.518901] ath11k_pci 0000:03:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 6179564
> kernel: [ 122.518915] ath11k_pci 0000:03:00.0: board name
> kernel: [ 122.518917] ath11k_pci 0000:03:00.0: 00000000: 62 75 73 3d 70 63 69 bus=pci
> kernel: [ 122.518918] ath11k_pci 0000:03:00.0: boot found match regdb data for name 'bus=pci'
> kernel: [ 122.518920] ath11k_pci 0000:03:00.0: boot found regdb data for 'bus=pci'
> kernel: [ 122.518921] ath11k_pci 0000:03:00.0: fetched regdb
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
>
> Signed-off-by: Wen Gong <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
88ca89202f8e wifi: ath11k: add support default regdb while searching board-2.bin for WCN6855
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches