Lingbo Kong <[email protected]> wrote:
> Currently, ath12k does not support Time-Average-SAR(TAS) for WCN7850. In
> order to enable Time-Average-SAR(TAS) for WCN7850, ath12k defines
> ath12k_get_acpi_all_data() function to get TAS configuration and SAR power
> table, then sets pdev_id, param_type_id, and finally sends the TAS
> configuration, SAR power table and WMI_PDEV_SET_BIOS_INTERFACE_CMDID
> command to firmware to implement TAS during the initialization phase.
> Besides, ath12k registers an ACPI event callback so that ACPI can notify
> ath12k to get the updated SAR power table and sends it to firmware when the
> device state is changed.
>
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
>
> Signed-off-by: Lingbo Kong <[email protected]>
> Acked-by: Jeff Johnson <[email protected]>
Fails to apply, please rebase.
error: patch failed: drivers/net/wireless/ath/ath12k/core.h:771
error: drivers/net/wireless/ath/ath12k/core.h: patch does not apply
error: patch failed: drivers/net/wireless/ath/ath12k/hw.c:907
error: drivers/net/wireless/ath/ath12k/hw.c: patch does not apply
error: patch failed: drivers/net/wireless/ath/ath12k/hw.h:186
error: drivers/net/wireless/ath/ath12k/hw.h: patch does not apply
error: patch failed: drivers/net/wireless/ath/ath12k/wmi.h:4791
error: drivers/net/wireless/ath/ath12k/wmi.h: patch does not apply
stg import: Diff does not apply cleanly
4 patches set to Changes Requested.
13378463 [v4,1/4] wifi: ath12k: add TAS capability for WCN7850
13378462 [v4,2/4] wifi: ath12k: add BIOS SAR capability for WCN7850
13378465 [v4,3/4] wifi: ath12k: add adjust configuration of CCA threshold value for WCN7850
13378464 [v4,4/4] wifi: ath12k: add set band edge channel power for WCN7850
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches