Add P2P support for QCA6390/WCN6855/QCA2066.
v2:
1. patch #1, #4 and #6 have already been acked by Jeff.
2. patch #2: remove unnecessary initializer in
ath11k_mac_setup_bcn_p2p_ie() and change judgement for P2P GO.
3. patch #3: verify the validity of descriptors number and remove
blank line.
4. patch #5: change scan flag filter before
ath11k_wmi_send_scan_start_cmd().
Kang Yang (6):
wifi: ath11k: change interface combination for P2P mode
wifi: ath11k: add P2P IE in beacon template
wifi: ath11k: implement handling of P2P NoA event
wifi: ath11k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512
wifi: ath11k: change scan flag scan_f_filter_prb_req for
QCA6390/WCN6855/QCA2066
wifi: ath11k: advertise P2P dev support for QCA6390/WCN6855/QCA2066
drivers/net/wireless/ath/ath11k/Makefile | 3 +-
drivers/net/wireless/ath/ath11k/core.c | 20 ++-
drivers/net/wireless/ath/ath11k/mac.c | 166 ++++++++++++++++++-----
drivers/net/wireless/ath/ath11k/p2p.c | 149 ++++++++++++++++++++
drivers/net/wireless/ath/ath11k/p2p.h | 22 +++
drivers/net/wireless/ath/ath11k/wmi.c | 107 ++++++++++++++-
drivers/net/wireless/ath/ath11k/wmi.h | 42 +++++-
7 files changed, 471 insertions(+), 38 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath11k/p2p.c
create mode 100644 drivers/net/wireless/ath/ath11k/p2p.h
base-commit: c39a5cfa0448f3afbee78373f16d87815a674f11
--
2.34.1
Current interface combination doesn't support P2P mode.
So change it for P2P mode.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 47 ++++++++++++++-------------
1 file changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index a6a37d67a50a..9240dedf3217 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -9857,12 +9857,18 @@ static int ath11k_mac_setup_iface_combinations(struct ath11k *ar)
struct ieee80211_iface_combination *combinations;
struct ieee80211_iface_limit *limits;
int n_limits;
+ bool p2p;
+
+ p2p = ab->hw_params.interface_modes & BIT(NL80211_IFTYPE_P2P_DEVICE);
combinations = kzalloc(sizeof(*combinations), GFP_KERNEL);
if (!combinations)
return -ENOMEM;
- n_limits = 2;
+ if (p2p)
+ n_limits = 3;
+ else
+ n_limits = 2;
limits = kcalloc(n_limits, sizeof(*limits), GFP_KERNEL);
if (!limits) {
@@ -9870,39 +9876,29 @@ static int ath11k_mac_setup_iface_combinations(struct ath11k *ar)
return -ENOMEM;
}
+ limits[0].types |= BIT(NL80211_IFTYPE_STATION);
+ limits[1].types |= BIT(NL80211_IFTYPE_AP);
+ if (IS_ENABLED(CONFIG_MAC80211_MESH) &&
+ ab->hw_params.interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
+ limits[1].types |= BIT(NL80211_IFTYPE_MESH_POINT);
+
+ combinations[0].limits = limits;
+ combinations[0].n_limits = n_limits;
+ combinations[0].beacon_int_infra_match = true;
+ combinations[0].beacon_int_min_gcd = 100;
+
if (ab->hw_params.support_dual_stations) {
limits[0].max = 2;
- limits[0].types |= BIT(NL80211_IFTYPE_STATION);
-
limits[1].max = 1;
- limits[1].types |= BIT(NL80211_IFTYPE_AP);
- if (IS_ENABLED(CONFIG_MAC80211_MESH) &&
- ab->hw_params.interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
- limits[1].types |= BIT(NL80211_IFTYPE_MESH_POINT);
- combinations[0].limits = limits;
- combinations[0].n_limits = 2;
combinations[0].max_interfaces = ab->hw_params.num_vdevs;
combinations[0].num_different_channels = 2;
- combinations[0].beacon_int_infra_match = true;
- combinations[0].beacon_int_min_gcd = 100;
} else {
limits[0].max = 1;
- limits[0].types |= BIT(NL80211_IFTYPE_STATION);
-
limits[1].max = 16;
- limits[1].types |= BIT(NL80211_IFTYPE_AP);
-
- if (IS_ENABLED(CONFIG_MAC80211_MESH) &&
- ab->hw_params.interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
- limits[1].types |= BIT(NL80211_IFTYPE_MESH_POINT);
- combinations[0].limits = limits;
- combinations[0].n_limits = 2;
combinations[0].max_interfaces = 16;
combinations[0].num_different_channels = 1;
- combinations[0].beacon_int_infra_match = true;
- combinations[0].beacon_int_min_gcd = 100;
combinations[0].radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
BIT(NL80211_CHAN_WIDTH_20) |
BIT(NL80211_CHAN_WIDTH_40) |
@@ -9911,6 +9907,13 @@ static int ath11k_mac_setup_iface_combinations(struct ath11k *ar)
BIT(NL80211_CHAN_WIDTH_160);
}
+ if (p2p) {
+ limits[1].types |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
+ limits[2].max = 1;
+ limits[2].types |= BIT(NL80211_IFTYPE_P2P_DEVICE);
+ }
+
ar->hw->wiphy->iface_combinations = combinations;
ar->hw->wiphy->n_iface_combinations = 1;
--
2.34.1
The NoA(Notice of Absence) attribute is used by the P2P Group Owner to
signal its absence due to power save timing, concurrent operation, or
off-channel scanning. It is also used in the P2P Presence Request-Response
mechanism.
The NoA attribute shall be present in the P2P IE in the beacon frames
transmitted by a P2P Group Owner when a NoA schedule is being advertised,
or when the CTWindow is non-zero.
So add support to update P2P information after P2P GO is up through
event WMI_P2P_NOA_EVENTID, and always put it in probe resp.
Create p2p.c and p2p.h for P2P related functions and definitions.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <[email protected]>
---
drivers/net/wireless/ath/ath11k/Makefile | 3 +-
drivers/net/wireless/ath/ath11k/p2p.c | 149 +++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/p2p.h | 22 ++++
drivers/net/wireless/ath/ath11k/wmi.c | 68 ++++++++++-
drivers/net/wireless/ath/ath11k/wmi.h | 31 +++++
5 files changed, 271 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath11k/p2p.c
create mode 100644 drivers/net/wireless/ath/ath11k/p2p.h
diff --git a/drivers/net/wireless/ath/ath11k/Makefile b/drivers/net/wireless/ath/ath11k/Makefile
index 2c94d50ae36f..43d2d8ddcdc0 100644
--- a/drivers/net/wireless/ath/ath11k/Makefile
+++ b/drivers/net/wireless/ath/ath11k/Makefile
@@ -18,7 +18,8 @@ ath11k-y += core.o \
dbring.o \
hw.o \
pcic.o \
- fw.o
+ fw.o \
+ p2p.o
ath11k-$(CONFIG_ATH11K_DEBUGFS) += debugfs.o debugfs_htt_stats.o debugfs_sta.o
ath11k-$(CONFIG_NL80211_TESTMODE) += testmode.o
diff --git a/drivers/net/wireless/ath/ath11k/p2p.c b/drivers/net/wireless/ath/ath11k/p2p.c
new file mode 100644
index 000000000000..aabf1e04b465
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/p2p.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: BSD-3-Clause-Clear
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "core.h"
+#include "wmi.h"
+#include "mac.h"
+#include "p2p.h"
+
+static void ath11k_p2p_noa_ie_fill(u8 *data, size_t len,
+ const struct ath11k_wmi_p2p_noa_info *noa)
+{
+ struct ieee80211_p2p_noa_attr *noa_attr;
+ u8 noa_descriptors, ctwindow;
+ bool oppps;
+ __le16 *noa_attr_len;
+ u16 attr_len;
+ int i;
+
+ ctwindow = u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_CTWIN_TU);
+ oppps = u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_OPP_PS);
+ noa_descriptors = u32_get_bits(noa->noa_attr,
+ WMI_P2P_NOA_INFO_DESC_NUM);
+
+ /* P2P IE */
+ data[0] = WLAN_EID_VENDOR_SPECIFIC;
+ data[1] = len - 2;
+ data[2] = (WLAN_OUI_WFA >> 16) & 0xff;
+ data[3] = (WLAN_OUI_WFA >> 8) & 0xff;
+ data[4] = (WLAN_OUI_WFA >> 0) & 0xff;
+ data[5] = WLAN_OUI_TYPE_WFA_P2P;
+
+ /* NOA ATTR */
+ data[6] = IEEE80211_P2P_ATTR_ABSENCE_NOTICE;
+ noa_attr_len = (__le16 *)&data[7]; /* 2 bytes */
+ noa_attr = (struct ieee80211_p2p_noa_attr *)&data[9];
+
+ noa_attr->index = u32_get_bits(noa->noa_attr,
+ WMI_P2P_NOA_INFO_INDEX);
+ noa_attr->oppps_ctwindow = ctwindow;
+ if (oppps)
+ noa_attr->oppps_ctwindow |= IEEE80211_P2P_OPPPS_ENABLE_BIT;
+
+ for (i = 0; i < noa_descriptors; i++) {
+ noa_attr->desc[i].count = noa->descriptors[i].type_count;
+ noa_attr->desc[i].duration =
+ cpu_to_le32(noa->descriptors[i].duration);
+ noa_attr->desc[i].interval =
+ cpu_to_le32(noa->descriptors[i].interval);
+ noa_attr->desc[i].start_time =
+ cpu_to_le32(noa->descriptors[i].start_time);
+ }
+
+ attr_len = 2; /* index + oppps_ctwindow */
+ attr_len += noa_descriptors * sizeof(struct ieee80211_p2p_noa_desc);
+ *noa_attr_len = __cpu_to_le16(attr_len);
+}
+
+static size_t
+ath11k_p2p_noa_ie_len_compute(const struct ath11k_wmi_p2p_noa_info *noa)
+{
+ size_t len = 0;
+ u8 noa_descriptors = u32_get_bits(noa->noa_attr,
+ WMI_P2P_NOA_INFO_DESC_NUM);
+
+ if (!(noa_descriptors) &&
+ !(u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_OPP_PS)))
+ return 0;
+
+ len += 1 + 1 + 4; /* EID + len + OUI */
+ len += 1 + 2; /* noa attr + attr len */
+ len += 1 + 1; /* index + oppps_ctwindow */
+ len += noa_descriptors *
+ sizeof(struct ieee80211_p2p_noa_desc);
+
+ return len;
+}
+
+static void ath11k_p2p_noa_ie_assign(struct ath11k_vif *arvif, void *ie,
+ size_t len)
+{
+ struct ath11k *ar = arvif->ar;
+
+ lockdep_assert_held(&ar->data_lock);
+
+ kfree(arvif->u.ap.noa_data);
+
+ arvif->u.ap.noa_data = ie;
+ arvif->u.ap.noa_len = len;
+}
+
+static void __ath11k_p2p_noa_update(struct ath11k_vif *arvif,
+ const struct ath11k_wmi_p2p_noa_info *noa)
+{
+ struct ath11k *ar = arvif->ar;
+ void *ie;
+ size_t len;
+
+ lockdep_assert_held(&ar->data_lock);
+
+ ath11k_p2p_noa_ie_assign(arvif, NULL, 0);
+
+ len = ath11k_p2p_noa_ie_len_compute(noa);
+ if (!len)
+ return;
+
+ ie = kmalloc(len, GFP_ATOMIC);
+ if (!ie)
+ return;
+
+ ath11k_p2p_noa_ie_fill(ie, len, noa);
+ ath11k_p2p_noa_ie_assign(arvif, ie, len); }
+
+void ath11k_p2p_noa_update(struct ath11k_vif *arvif,
+ const struct ath11k_wmi_p2p_noa_info *noa)
+{
+ struct ath11k *ar = arvif->ar;
+
+ spin_lock_bh(&ar->data_lock);
+ __ath11k_p2p_noa_update(arvif, noa);
+ spin_unlock_bh(&ar->data_lock);
+}
+
+static void ath11k_p2p_noa_update_vdev_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
+ struct ath11k_p2p_noa_arg *arg = data;
+
+ if (arvif->vdev_id != arg->vdev_id)
+ return;
+
+ ath11k_p2p_noa_update(arvif, arg->noa);
+}
+
+void ath11k_p2p_noa_update_by_vdev_id(struct ath11k *ar, u32 vdev_id,
+ const struct ath11k_wmi_p2p_noa_info *noa)
+{
+ struct ath11k_p2p_noa_arg arg = {
+ .vdev_id = vdev_id,
+ .noa = noa,
+ };
+
+ ieee80211_iterate_active_interfaces_atomic(ar->hw,
+ IEEE80211_IFACE_ITER_NORMAL,
+ ath11k_p2p_noa_update_vdev_iter,
+ &arg);
+}
diff --git a/drivers/net/wireless/ath/ath11k/p2p.h b/drivers/net/wireless/ath/ath11k/p2p.h
new file mode 100644
index 000000000000..d907940a9b09
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/p2p.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear */
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef ATH11K_P2P_H
+#define ATH11K_P2P_H
+
+#include "wmi.h"
+
+struct ath11k_wmi_p2p_noa_info;
+
+struct ath11k_p2p_noa_arg {
+ u32 vdev_id;
+ const struct ath11k_wmi_p2p_noa_info *noa;
+};
+
+void ath11k_p2p_noa_update(struct ath11k_vif *arvif,
+ const struct ath11k_wmi_p2p_noa_info *noa);
+void ath11k_p2p_noa_update_by_vdev_id(struct ath11k *ar, u32 vdev_id,
+ const struct ath11k_wmi_p2p_noa_info *noa);
+#endif
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index d86fcdd374c6..c74aa3f95658 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -20,6 +20,7 @@
#include "hw.h"
#include "peer.h"
#include "testmode.h"
+#include "p2p.h"
struct wmi_tlv_policy {
size_t min_len;
@@ -154,6 +155,10 @@ static const struct wmi_tlv_policy wmi_tlv_policies[] = {
.min_len = sizeof(struct wmi_per_chain_rssi_stats) },
[WMI_TAG_TWT_ADD_DIALOG_COMPLETE_EVENT] = {
.min_len = sizeof(struct wmi_twt_add_dialog_event) },
+ [WMI_TAG_P2P_NOA_INFO] = {
+ .min_len = sizeof(struct ath11k_wmi_p2p_noa_info) },
+ [WMI_TAG_P2P_NOA_EVENT] = {
+ .min_len = sizeof(struct wmi_p2p_noa_event) },
};
#define PRIMAP(_hw_mode_) \
@@ -981,7 +986,7 @@ int ath11k_wmi_vdev_start(struct ath11k *ar, struct wmi_vdev_start_req_arg *arg,
FIELD_PREP(WMI_TLV_LEN, 0);
/* Note: This is a nested TLV containing:
- * [wmi_tlv][wmi_p2p_noa_descriptor][wmi_tlv]..
+ * [wmi_tlv][ath11k_wmi_p2p_noa_descriptor][wmi_tlv]..
*/
ptr += sizeof(*tlv);
@@ -8645,6 +8650,64 @@ static void ath11k_wmi_gtk_offload_status_event(struct ath11k_base *ab,
kfree(tb);
}
+static int ath11k_wmi_p2p_noa_event(struct ath11k_base *ab,
+ struct sk_buff *skb)
+{
+ const void **tb;
+ const struct wmi_p2p_noa_event *ev;
+ const struct ath11k_wmi_p2p_noa_info *noa;
+ struct ath11k *ar;
+ int ret, vdev_id;
+ u8 noa_descriptors;
+
+ tb = ath11k_wmi_tlv_parse_alloc(ab, skb, GFP_ATOMIC);
+ if (IS_ERR(tb)) {
+ ret = PTR_ERR(tb);
+ ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
+ return ret;
+ }
+
+ ev = tb[WMI_TAG_P2P_NOA_EVENT];
+ noa = tb[WMI_TAG_P2P_NOA_INFO];
+
+ if (!ev || !noa) {
+ ret = -EPROTO;
+ goto out;
+ }
+
+ vdev_id = ev->vdev_id;
+ noa_descriptors = u32_get_bits(noa->noa_attr,
+ WMI_P2P_NOA_INFO_DESC_NUM);
+
+ if (noa_descriptors > WMI_P2P_MAX_NOA_DESCRIPTORS) {
+ ath11k_warn(ab, "invalid descriptor num %d in P2P NoA event\n",
+ noa_descriptors);
+ return -EINVAL;
+ goto out;
+ }
+
+ ath11k_dbg(ab, ATH11K_DBG_WMI,
+ "wmi tlv p2p noa vdev_id %i descriptors %u\n",
+ vdev_id, noa_descriptors);
+
+ rcu_read_lock();
+ ar = ath11k_mac_get_ar_by_vdev_id(ab, vdev_id);
+ if (!ar) {
+ ath11k_warn(ab, "invalid vdev id %d in P2P NoA event\n",
+ vdev_id);
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ ath11k_p2p_noa_update_by_vdev_id(ar, vdev_id, noa);
+
+unlock:
+ rcu_read_unlock();
+out:
+ kfree(tb);
+ return 0;
+}
+
static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
{
struct wmi_cmd_hdr *cmd_hdr;
@@ -8772,6 +8835,9 @@ static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
case WMI_GTK_OFFLOAD_STATUS_EVENTID:
ath11k_wmi_gtk_offload_status_event(ab, skb);
break;
+ case WMI_P2P_NOA_EVENTID:
+ ath11k_wmi_p2p_noa_event(ab, skb);
+ break;
default:
ath11k_dbg(ab, ATH11K_DBG_WMI, "unsupported event id 0x%x\n", id);
break;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 4c20202947c7..564f4a9ac8ce 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -3630,6 +3630,37 @@ struct wmi_ftm_event_msg {
u8 data[];
} __packed;
+#define WMI_P2P_MAX_NOA_DESCRIPTORS 4
+
+struct wmi_p2p_noa_event {
+ u32 vdev_id;
+} __packed;
+
+struct ath11k_wmi_p2p_noa_descriptor {
+ u32 type_count; /* 255: continuous schedule, 0: reserved */
+ u32 duration; /* Absent period duration in micro seconds */
+ u32 interval; /* Absent period interval in micro seconds */
+ u32 start_time; /* 32 bit tsf time when in starts */
+} __packed;
+
+#define WMI_P2P_NOA_INFO_CHANGED_FLAG BIT(0)
+#define WMI_P2P_NOA_INFO_INDEX GENMASK(15, 8)
+#define WMI_P2P_NOA_INFO_OPP_PS BIT(16)
+#define WMI_P2P_NOA_INFO_CTWIN_TU GENMASK(23, 17)
+#define WMI_P2P_NOA_INFO_DESC_NUM GENMASK(31, 24)
+
+struct ath11k_wmi_p2p_noa_info {
+ /* Bit 0 - Flag to indicate an update in NOA schedule
+ * Bits 7-1 - Reserved
+ * Bits 15-8 - Index (identifies the instance of NOA sub element)
+ * Bit 16 - Opp PS state of the AP
+ * Bits 23-17 - Ctwindow in TUs
+ * Bits 31-24 - Number of NOA descriptors
+ */
+ u32 noa_attr;
+ struct ath11k_wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
+} __packed;
+
#define WMI_BEACON_TX_BUFFER_SIZE 512
#define WMI_EMA_TMPL_IDX_SHIFT 8
--
2.34.1
Mac80211 needs more space for P2P scan ie in P2P mode, 256 is not
enough, resize it to 512.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 564f4a9ac8ce..ae788949bf40 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -66,7 +66,7 @@ struct wmi_tlv {
#define WLAN_SCAN_PARAMS_MAX_SSID 16
#define WLAN_SCAN_PARAMS_MAX_BSSID 4
-#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
+#define WLAN_SCAN_PARAMS_MAX_IE_LEN 512
#define WMI_APPEND_TO_EXISTING_CHAN_LIST_FLAG 1
--
2.34.1
Current ROC scan will filter probe request. So P2P device cannot receive
probe request. But it is necessary for P2P mode. A P2P device cannot be
discovered if it doesn't respond to others' probe request.
In addition, station won't filter probe request with common scan. But
for station, there is no needed to receive probe request.
Based on the above two points, change scan flag scan_f_filter_prb_req
for QCA6390/WCN6855/QCA2066.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 24aab590b05c..d66d09adf2fa 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -4083,6 +4083,9 @@ static int ath11k_mac_op_hw_scan(struct ieee80211_hw *hw,
arg->vdev_id = arvif->vdev_id;
arg->scan_id = ATH11K_SCAN_ID;
+ if (ar->ab->hw_params.single_pdev_only)
+ arg->scan_f_filter_prb_req = 1;
+
if (req->ie_len) {
arg->extraie.ptr = kmemdup(req->ie, req->ie_len, GFP_KERNEL);
if (!arg->extraie.ptr) {
@@ -9340,9 +9343,11 @@ static int ath11k_mac_op_remain_on_channel(struct ieee80211_hw *hw,
arg->dwell_time_passive = scan_time_msec;
arg->max_scan_time = scan_time_msec;
arg->scan_f_passive = 1;
- arg->scan_f_filter_prb_req = 1;
arg->burst_duration = duration;
+ if (!ar->ab->hw_params.single_pdev_only)
+ arg->scan_f_filter_prb_req = 1;
+
ret = ath11k_start_scan(ar, arg);
if (ret) {
ath11k_warn(ar->ab, "failed to start roc scan: %d\n", ret);
--
2.34.1
Now that all the necessary pieces are implemented we can enable P2P
support for QCA6390/WCN6855/QCA2066.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
---
drivers/net/wireless/ath/ath11k/core.c | 20 ++++++++++++++++----
drivers/net/wireless/ath/ath11k/mac.c | 9 +++++++++
2 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index c78bce19bd75..6e9f16f01ebd 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -247,7 +247,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_AP),
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_DEVICE) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO),
.supports_monitor = false,
.full_monitor_mode = false,
.supports_shadow_regs = true,
@@ -416,7 +419,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_AP),
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_DEVICE) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO),
.supports_monitor = false,
.full_monitor_mode = false,
.supports_shadow_regs = true,
@@ -501,7 +507,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_AP),
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_DEVICE) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO),
.supports_monitor = false,
.supports_shadow_regs = true,
.idle_ps = true,
@@ -750,7 +759,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
},
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_AP),
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_DEVICE) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO),
.supports_monitor = false,
.full_monitor_mode = false,
.supports_shadow_regs = true,
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index d66d09adf2fa..d65a19f9b694 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -6660,17 +6660,26 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_STATION:
arvif->vdev_type = WMI_VDEV_TYPE_STA;
+ if (vif->p2p)
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT;
break;
case NL80211_IFTYPE_MESH_POINT:
arvif->vdev_subtype = WMI_VDEV_SUBTYPE_MESH_11S;
fallthrough;
case NL80211_IFTYPE_AP:
arvif->vdev_type = WMI_VDEV_TYPE_AP;
+ if (vif->p2p)
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO;
break;
case NL80211_IFTYPE_MONITOR:
arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
ar->monitor_vdev_id = bit;
break;
+ case NL80211_IFTYPE_P2P_DEVICE:
+ arvif->vdev_type = WMI_VDEV_TYPE_STA;
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+ break;
+
default:
WARN_ON(1);
break;
--
2.34.1
P2P Element is a necessary component of P2P protocol communication.
It contains the Vendor Specific Information Element which includes
the WFA OUI and an OUI Type indicating P2P.
Add P2P IE in beacon template, and implement WMI interface for it.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 103 ++++++++++++++++++++++++--
drivers/net/wireless/ath/ath11k/wmi.c | 39 ++++++++++
drivers/net/wireless/ath/ath11k/wmi.h | 9 +++
3 files changed, 143 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 9240dedf3217..24aab590b05c 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1430,10 +1430,67 @@ static bool ath11k_mac_set_nontx_vif_params(struct ath11k_vif *tx_arvif,
return false;
}
-static void ath11k_mac_set_vif_params(struct ath11k_vif *arvif,
- struct sk_buff *bcn)
+static int ath11k_mac_setup_bcn_p2p_ie(struct ath11k_vif *arvif,
+ struct sk_buff *bcn)
{
+ struct ath11k *ar = arvif->ar;
+ struct ieee80211_mgmt *mgmt;
+ const u8 *p2p_ie;
+ int ret;
+
+ mgmt = (void *)bcn->data;
+ p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+ mgmt->u.beacon.variable,
+ bcn->len - (mgmt->u.beacon.variable -
+ bcn->data));
+ if (!p2p_ie)
+ return -ENOENT;
+
+ ret = ath11k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie);
+ if (ret) {
+ ath11k_warn(ar->ab, "failed to submit P2P GO bcn ie for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int ath11k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui,
+ u8 oui_type, size_t ie_offset)
+{
+ size_t len;
+ const u8 *next, *end;
+ u8 *ie;
+
+ if (WARN_ON(skb->len < ie_offset))
+ return -EINVAL;
+
+ ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type,
+ skb->data + ie_offset,
+ skb->len - ie_offset);
+ if (!ie)
+ return -ENOENT;
+
+ len = ie[1] + 2;
+ end = skb->data + skb->len;
+ next = ie + len;
+
+ if (WARN_ON(next > end))
+ return -EINVAL;
+
+ memmove(ie, next, end - next);
+ skb_trim(skb, skb->len - len);
+
+ return 0;
+}
+
+static int ath11k_mac_set_vif_params(struct ath11k_vif *arvif,
+ struct sk_buff *bcn)
+{
+ struct ath11k_base *ab = arvif->ar->ab;
struct ieee80211_mgmt *mgmt;
+ int ret = 0;
u8 *ies;
ies = bcn->data + ieee80211_get_hdrlen_from_skb(bcn);
@@ -1451,6 +1508,32 @@ static void ath11k_mac_set_vif_params(struct ath11k_vif *arvif,
arvif->wpaie_present = true;
else
arvif->wpaie_present = false;
+
+ if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+ return ret;
+
+ ret = ath11k_mac_setup_bcn_p2p_ie(arvif, bcn);
+ if (ret) {
+ ath11k_warn(ab, "failed to setup P2P GO bcn ie: %d\n",
+ ret);
+ return ret;
+ }
+
+ /* P2P IE is inserted by firmware automatically (as
+ * configured above) so remove it from the base beacon
+ * template to avoid duplicate P2P IEs in beacon frames.
+ */
+ ret = ath11k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA,
+ WLAN_OUI_TYPE_WFA_P2P,
+ offsetof(struct ieee80211_mgmt,
+ u.beacon.variable));
+ if (ret) {
+ ath11k_warn(ab, "failed to remove P2P vendor ie: %d\n",
+ ret);
+ return ret;
+ }
+
+ return ret;
}
static int ath11k_mac_setup_bcn_tmpl_ema(struct ath11k_vif *arvif)
@@ -1472,10 +1555,12 @@ static int ath11k_mac_setup_bcn_tmpl_ema(struct ath11k_vif *arvif)
return -EPERM;
}
- if (tx_arvif == arvif)
- ath11k_mac_set_vif_params(tx_arvif, beacons->bcn[0].skb);
- else
+ if (tx_arvif == arvif) {
+ if (ath11k_mac_set_vif_params(tx_arvif, beacons->bcn[0].skb))
+ return -EINVAL;
+ } else {
arvif->wpaie_present = tx_arvif->wpaie_present;
+ }
for (i = 0; i < beacons->cnt; i++) {
if (tx_arvif != arvif && !nontx_vif_params_set)
@@ -1534,10 +1619,12 @@ static int ath11k_mac_setup_bcn_tmpl_mbssid(struct ath11k_vif *arvif)
return -EPERM;
}
- if (tx_arvif == arvif)
- ath11k_mac_set_vif_params(tx_arvif, bcn);
- else if (!ath11k_mac_set_nontx_vif_params(tx_arvif, arvif, bcn))
+ if (tx_arvif == arvif) {
+ if (ath11k_mac_set_vif_params(tx_arvif, bcn))
+ return -EINVAL;
+ } else if (!ath11k_mac_set_nontx_vif_params(tx_arvif, arvif, bcn)) {
return -EINVAL;
+ }
ret = ath11k_wmi_bcn_tmpl(ar, arvif->vdev_id, &offs, bcn, 0);
kfree_skb(bcn);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 34ab9631ff36..d86fcdd374c6 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1704,6 +1704,45 @@ int ath11k_wmi_send_bcn_offload_control_cmd(struct ath11k *ar,
return ret;
}
+int ath11k_wmi_p2p_go_bcn_ie(struct ath11k *ar, u32 vdev_id,
+ const u8 *p2p_ie)
+{
+ struct ath11k_pdev_wmi *wmi = ar->wmi;
+ struct wmi_p2p_go_set_beacon_ie_cmd *cmd;
+ size_t p2p_ie_len, aligned_len;
+ struct wmi_tlv *tlv;
+ struct sk_buff *skb;
+ int ret, len;
+
+ p2p_ie_len = p2p_ie[1] + 2;
+ aligned_len = roundup(p2p_ie_len, 4);
+
+ len = sizeof(*cmd) + TLV_HDR_SIZE + aligned_len;
+
+ skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, len);
+ if (!skb)
+ return -ENOMEM;
+
+ cmd = (struct wmi_p2p_go_set_beacon_ie_cmd *)skb->data;
+ cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_P2P_GO_SET_BEACON_IE) |
+ FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+ cmd->vdev_id = vdev_id;
+ cmd->ie_buf_len = p2p_ie_len;
+
+ tlv = (struct wmi_tlv *)cmd->tlv;
+ tlv->header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ARRAY_BYTE) |
+ FIELD_PREP(WMI_TLV_LEN, aligned_len);
+ memcpy(tlv->value, p2p_ie, p2p_ie_len);
+
+ ret = ath11k_wmi_cmd_send(wmi, skb, WMI_P2P_GO_SET_BEACON_IE);
+ if (ret) {
+ ath11k_warn(ar->ab, "failed to send WMI_P2P_GO_SET_BEACON_IE\n");
+ dev_kfree_skb(skb);
+ }
+
+ return ret;
+}
+
int ath11k_wmi_bcn_tmpl(struct ath11k *ar, u32 vdev_id,
struct ieee80211_mutable_offsets *offs,
struct sk_buff *bcn, u32 ema_params)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index bb419e3abb00..4c20202947c7 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -3653,6 +3653,13 @@ struct wmi_bcn_tmpl_cmd {
u32 ema_params;
} __packed;
+struct wmi_p2p_go_set_beacon_ie_cmd {
+ u32 tlv_header;
+ u32 vdev_id;
+ u32 ie_buf_len;
+ u8 tlv[];
+} __packed;
+
struct wmi_key_seq_counter {
u32 key_seq_counter_l;
u32 key_seq_counter_h;
@@ -6349,6 +6356,8 @@ int ath11k_wmi_cmd_send(struct ath11k_pdev_wmi *wmi, struct sk_buff *skb,
struct sk_buff *ath11k_wmi_alloc_skb(struct ath11k_wmi_base *wmi_sc, u32 len);
int ath11k_wmi_mgmt_send(struct ath11k *ar, u32 vdev_id, u32 buf_id,
struct sk_buff *frame);
+int ath11k_wmi_p2p_go_bcn_ie(struct ath11k *ar, u32 vdev_id,
+ const u8 *p2p_ie);
int ath11k_wmi_bcn_tmpl(struct ath11k *ar, u32 vdev_id,
struct ieee80211_mutable_offsets *offs,
struct sk_buff *bcn, u32 ema_param);
--
2.34.1
Hi，jeff, this is 2nd version of P2P for ath11k, could you please review
them?
On 2/28/2024 5:35 PM, Kang Yang wrote:
> Add P2P support for QCA6390/WCN6855/QCA2066.
>
> v2:
> 1. patch #1, #4 and #6 have already been acked by Jeff.
> 2. patch #2: remove unnecessary initializer in
> ath11k_mac_setup_bcn_p2p_ie() and change judgement for P2P GO.
> 3. patch #3: verify the validity of descriptors number and remove
> blank line.
> 4. patch #5: change scan flag filter before
> ath11k_wmi_send_scan_start_cmd().
>
> Kang Yang (6):
> wifi: ath11k: change interface combination for P2P mode
> wifi: ath11k: add P2P IE in beacon template
> wifi: ath11k: implement handling of P2P NoA event
> wifi: ath11k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512
> wifi: ath11k: change scan flag scan_f_filter_prb_req for
> QCA6390/WCN6855/QCA2066
> wifi: ath11k: advertise P2P dev support for QCA6390/WCN6855/QCA2066
>
> drivers/net/wireless/ath/ath11k/Makefile | 3 +-
> drivers/net/wireless/ath/ath11k/core.c | 20 ++-
> drivers/net/wireless/ath/ath11k/mac.c | 166 ++++++++++++++++++-----
> drivers/net/wireless/ath/ath11k/p2p.c | 149 ++++++++++++++++++++
> drivers/net/wireless/ath/ath11k/p2p.h | 22 +++
> drivers/net/wireless/ath/ath11k/wmi.c | 107 ++++++++++++++-
> drivers/net/wireless/ath/ath11k/wmi.h | 42 +++++-
> 7 files changed, 471 insertions(+), 38 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath11k/p2p.c
> create mode 100644 drivers/net/wireless/ath/ath11k/p2p.h
>
>
> base-commit: c39a5cfa0448f3afbee78373f16d87815a674f11
On 2/28/2024 1:35 AM, Kang Yang wrote:
> Current ROC scan will filter probe request. So P2P device cannot receive
> probe request. But it is necessary for P2P mode. A P2P device cannot be
> discovered if it doesn't respond to others' probe request.
>
> In addition, station won't filter probe request with common scan. But
> for station, there is no needed to receive probe request.
>
> Based on the above two points, change scan flag scan_f_filter_prb_req
> for QCA6390/WCN6855/QCA2066.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
> Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
>
> Signed-off-by: Kang Yang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
On 2/28/2024 1:35 AM, Kang Yang wrote:
> P2P Element is a necessary component of P2P protocol communication.
> It contains the Vendor Specific Information Element which includes
> the WFA OUI and an OUI Type indicating P2P.
>
> Add P2P IE in beacon template, and implement WMI interface for it.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
> Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
>
> Signed-off-by: Kang Yang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
On 2/28/2024 1:35 AM, Kang Yang wrote:
> The NoA(Notice of Absence) attribute is used by the P2P Group Owner to
> signal its absence due to power save timing, concurrent operation, or
> off-channel scanning. It is also used in the P2P Presence Request-Response
> mechanism.
>
> The NoA attribute shall be present in the P2P IE in the beacon frames
> transmitted by a P2P Group Owner when a NoA schedule is being advertised,
> or when the CTWindow is non-zero.
>
> So add support to update P2P information after P2P GO is up through
> event WMI_P2P_NOA_EVENTID, and always put it in probe resp.
>
> Create p2p.c and p2p.h for P2P related functions and definitions.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
> Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
>
> Signed-off-by: Kang Yang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
On 2/28/2024 5:35 PM, Kang Yang wrote:
> Add P2P support for QCA6390/WCN6855/QCA2066.
>
> v2:
> 1. patch #1, #4 and #6 have already been acked by Jeff.
> 2. patch #2: remove unnecessary initializer in
> ath11k_mac_setup_bcn_p2p_ie() and change judgement for P2P GO.
> 3. patch #3: verify the validity of descriptors number and remove
> blank line.
> 4. patch #5: change scan flag filter before
> ath11k_wmi_send_scan_start_cmd().
>
> Kang Yang (6):
> wifi: ath11k: change interface combination for P2P mode
> wifi: ath11k: add P2P IE in beacon template
> wifi: ath11k: implement handling of P2P NoA event
> wifi: ath11k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512
> wifi: ath11k: change scan flag scan_f_filter_prb_req for
> QCA6390/WCN6855/QCA2066
> wifi: ath11k: advertise P2P dev support for QCA6390/WCN6855/QCA2066
Hi, kalle:
We have a customer request for P2P on ath11k. They need us to upstream
P2P feature. So could you help process this patchset?
>
> drivers/net/wireless/ath/ath11k/Makefile | 3 +-
> drivers/net/wireless/ath/ath11k/core.c | 20 ++-
> drivers/net/wireless/ath/ath11k/mac.c | 166 ++++++++++++++++++-----
> drivers/net/wireless/ath/ath11k/p2p.c | 149 ++++++++++++++++++++
> drivers/net/wireless/ath/ath11k/p2p.h | 22 +++
> drivers/net/wireless/ath/ath11k/wmi.c | 107 ++++++++++++++-
> drivers/net/wireless/ath/ath11k/wmi.h | 42 +++++-
> 7 files changed, 471 insertions(+), 38 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath11k/p2p.c
> create mode 100644 drivers/net/wireless/ath/ath11k/p2p.h
>
>
> base-commit: c39a5cfa0448f3afbee78373f16d87815a674f11
Kang Yang <[email protected]> wrote:
> Current interface combination doesn't support P2P mode.
>
> So change it for P2P mode.
>
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
> Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
>
> Signed-off-by: Kang Yang <[email protected]>
> Acked-by: Jeff Johnson <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>
6 patches applied to ath-next branch of ath.git, thanks.
faedd6e0e139 wifi: ath11k: change interface combination for P2P mode
3a415daa3e8b wifi: ath11k: add P2P IE in beacon template
2408379f15a1 wifi: ath11k: implement handling of P2P NoA event
75b5f1e71abc wifi: ath11k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512
6c7c30adf79e wifi: ath11k: change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066
f8c0799b2428 wifi: ath11k: advertise P2P dev support for QCA6390/WCN6855/QCA2066
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches