I found a logical error in an if statement that always evaluates to false.
This has after same discussion resulted in that we add a macro to handle this.
This was partly found using a static code analysis program called cppcheck.
Rickard Strandqvist (1):
net: wireless: rtlwifi: rtl8192de: hw.c: Cleaning up if statement that always evaluates to false
drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8192de/reg.h | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
--
1.7.10.4
On Saturday 21 June 2014 23:03:42 Rickard Strandqvist wrote:
> I found a logical error in an if statement that always evaluates to false.
>
> This has after same discussion resulted in that we add a macro to handle this.
See other mail, this subject and commit message still suck. The change itself
is fine.
Don't forget those other drivers. You are aware that the *e drivers are for PCI(e)
devices, and *u for USB right?
Kind regards,
Peter
> Signed-off-by: Rickard Strandqvist <[email protected]>
> ---
> drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 2 +-
> drivers/net/wireless/rtlwifi/rtl8192de/reg.h | 1 +
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
> index 2b08671..280c3da 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
> @@ -1128,7 +1128,7 @@ static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
> }
> rtl_write_byte(rtlpriv, REG_CR + 2, bt_msr);
> rtlpriv->cfg->ops->led_control(hw, ledaction);
> - if ((bt_msr & 0xfc) == MSR_AP)
> + if ((bt_msr & MSR_MASK) == MSR_AP)
> rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
> else
> rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/reg.h b/drivers/net/wireless/rtlwifi/rtl8192de/reg.h
> index 7f29b8d..315a298 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192de/reg.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8192de/reg.h
> @@ -369,6 +369,7 @@
> #define MSR_ADHOC 0x01
> #define MSR_INFRA 0x02
> #define MSR_AP 0x03
> +#define MSR_MASK 0x03
>
> /* 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) */
> /* ----------------------------------------------------- */
>
I found a logical error in an if statement that always evaluates to false.
This has after same discussion resulted in that we add a macro to handle this.
Signed-off-by: Rickard Strandqvist <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8192de/reg.h | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
index 2b08671..280c3da 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
@@ -1128,7 +1128,7 @@ static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
}
rtl_write_byte(rtlpriv, REG_CR + 2, bt_msr);
rtlpriv->cfg->ops->led_control(hw, ledaction);
- if ((bt_msr & 0xfc) == MSR_AP)
+ if ((bt_msr & MSR_MASK) == MSR_AP)
rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
else
rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/reg.h b/drivers/net/wireless/rtlwifi/rtl8192de/reg.h
index 7f29b8d..315a298 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/reg.h
@@ -369,6 +369,7 @@
#define MSR_ADHOC 0x01
#define MSR_INFRA 0x02
#define MSR_AP 0x03
+#define MSR_MASK 0x03
/* 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) */
/* ----------------------------------------------------- */
--
1.7.10.4