Tx rate was updated to nl80211/user using sta_statistics callback.
This rate can not be used for mac80211 mesh and ATF.
This patch adds support to update tx rate to mac80211
Anilkumar Kolli (2):
mac80211: implement ieee80211_tx_rate_update to update rate
ath10k: report tx rate using ieee80211_tx_rate_update()
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/htt_rx.c | 70 +++++++++++++++++++++++++++---
drivers/net/wireless/ath/ath10k/wmi.h | 1 +
include/net/mac80211.h | 15 +++++++
net/mac80211/status.c | 22 ++++++++++
5 files changed, 103 insertions(+), 6 deletions(-)
--
1.7.9.5
Current mac80211 has provision to update tx status through
ieee80211_tx_status() and ieee80211_tx_status_ext(). But
drivers like ath10k updates the tx status from the skb except
txrate, txrate will be updated from a different path, peer stats.
Using ieee80211_tx_status_ext() in two different paths
- (one for the stats, one for the tx rate) will duplicate the stats.
To avoid this stats duplication, ieee80211_tx_rate_update() is implemented.
Signed-off-by: Anilkumar Kolli <[email protected]>
---
include/net/mac80211.h | 15 +++++++++++++++
net/mac80211/status.c | 22 ++++++++++++++++++++++
2 files changed, 37 insertions(+)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index c4fadbafbf21..86a6b1117a16 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -4352,6 +4352,21 @@ void ieee80211_sta_set_expected_throughput(struct ieee80211_sta *pubsta,
u32 thr);
/**
+ * ieee80211_tx_rate_update - transmit rate update callback
+ *
+ * Drivers should call this functions with a non-NULL pub sta
+ * This function can be used in drivers that does not have provision
+ * in updating the tx rate in data path.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @pubsta: the station to update the tx rate for.
+ * @info: tx status information
+ */
+void ieee80211_tx_rate_update(struct ieee80211_hw *hw,
+ struct ieee80211_sta *pubsta,
+ struct ieee80211_tx_info *info);
+
+/**
* ieee80211_tx_status - transmit status callback
*
* Call this function for all transmitted frames after they have been
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 91d7c0cd1882..6272fe1b351d 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -987,6 +987,28 @@ void ieee80211_tx_status_ext(struct ieee80211_hw *hw,
}
EXPORT_SYMBOL(ieee80211_tx_status_ext);
+void ieee80211_tx_rate_update(struct ieee80211_hw *hw,
+ struct ieee80211_sta *pubsta,
+ struct ieee80211_tx_info *info)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_supported_band *sband;
+ struct sta_info *sta;
+ struct ieee80211_tx_status status;
+
+ sband = hw->wiphy->bands[info->band];
+
+ sta = container_of(pubsta, struct sta_info, sta);
+ status.skb = NULL;
+ status.info = info;
+ status.sta = pubsta;
+
+ rate_control_tx_status(local, sband, &status);
+ if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL))
+ sta->tx_stats.last_rate = info->status.rates[0];
+}
+EXPORT_SYMBOL(ieee80211_tx_rate_update);
+
void ieee80211_report_low_ack(struct ieee80211_sta *pubsta, u32 num_packets)
{
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
--
1.7.9.5
Mesh path metric needs tx rate information from ieee80211_tx_status()
call but in ath10k there is no mechanism to report tx rate information
via ieee80211_tx_status(), the tx rate is only accessible via
sta_statiscs() op.
Per peer tx stats has tx rate info available, Tx rate is available
to ath10k driver after every 4 PPDU sent in the air. For each PPDU,
ath10k driver updates rate informattion to mac80211 using
ieee80211_tx_rate_update().
Per peer txrate information is updated through per peer statistics
and is available for QCA9888/QCA9984/QCA4019/QCA998X only
Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00053
Tested on QCA998X with firmware-5.bin_10.2.4-1.0-00036
Signed-off-by: Anilkumar Kolli <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/htt_rx.c | 70 +++++++++++++++++++++++++++---
drivers/net/wireless/ath/ath10k/wmi.h | 1 +
3 files changed, 66 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 491eb0d2fc5f..cd4ed5cab630 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -494,6 +494,7 @@ struct ath10k_sta {
u32 smps;
u16 peer_id;
struct rate_info txrate;
+ struct ieee80211_tx_info tx_info;
struct work_struct update_wk;
u64 rx_duration;
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index b862d5de5e2f..2c871ecd6afc 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2627,7 +2627,7 @@ void ath10k_htt_htc_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
dev_kfree_skb_any(skb);
}
-static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
+static inline s8 ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
{
static const u8 legacy_rates[] = {1, 2, 5, 11, 6, 9, 12,
18, 24, 36, 48, 54};
@@ -2646,7 +2646,7 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
ath10k_accumulate_per_peer_tx_stats(struct ath10k *ar,
struct ath10k_sta *arsta,
struct ath10k_per_peer_tx_stats *pstats,
- u8 legacy_rate_idx)
+ s8 legacy_rate_idx)
{
struct rate_info *txrate = &arsta->txrate;
struct ath10k_htt_tx_stats *tx_stats;
@@ -2768,8 +2768,11 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
struct ath10k_per_peer_tx_stats *peer_stats)
{
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
- u8 rate = 0, rate_idx = 0, sgi;
+ struct ieee80211_chanctx_conf *conf = NULL;
struct rate_info txrate;
+ u8 rate = 0, sgi;
+ s8 rate_idx = 0;
+ bool skip_auto_rate;
lockdep_assert_held(&ar->data_lock);
@@ -2778,6 +2781,13 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
txrate.nss = ATH10K_HW_NSS(peer_stats->ratecode);
txrate.mcs = ATH10K_HW_MCS_RATE(peer_stats->ratecode);
sgi = ATH10K_HW_GI(peer_stats->flags);
+ skip_auto_rate = ATH10K_FW_SKIPPED_RATE_CTRL(peer_stats->flags);
+
+ /* Firmware's rate control skips broadcast/management frames,
+ * if host has configure fixed rates and in some other special cases.
+ */
+ if (skip_auto_rate)
+ return;
if (txrate.flags == WMI_RATE_PREAMBLE_VHT && txrate.mcs > 9) {
ath10k_warn(ar, "Invalid VHT mcs %hhd peer stats", txrate.mcs);
@@ -2792,7 +2802,7 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
}
memset(&arsta->txrate, 0, sizeof(arsta->txrate));
-
+ memset(&arsta->tx_info.status, 0, sizeof(arsta->tx_info.status));
if (txrate.flags == WMI_RATE_PREAMBLE_CCK ||
txrate.flags == WMI_RATE_PREAMBLE_OFDM) {
rate = ATH10K_HW_LEGACY_RATE(peer_stats->ratecode);
@@ -2811,11 +2821,59 @@ static inline int ath10k_get_legacy_rate_idx(struct ath10k *ar, u8 rate)
arsta->txrate.mcs = txrate.mcs;
}
- if (sgi)
- arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+ switch (txrate.flags) {
+ case WMI_RATE_PREAMBLE_OFDM:
+ if (arsta->arvif && arsta->arvif->vif)
+ conf = rcu_dereference(arsta->arvif->vif->chanctx_conf);
+ if (conf && conf->def.chan->band == NL80211_BAND_5GHZ)
+ arsta->tx_info.status.rates[0].idx = rate_idx - 4;
+ break;
+ case WMI_RATE_PREAMBLE_CCK:
+ arsta->tx_info.status.rates[0].idx = rate_idx;
+ if (sgi)
+ arsta->tx_info.status.rates[0].flags |=
+ (IEEE80211_TX_RC_USE_SHORT_PREAMBLE |
+ IEEE80211_TX_RC_SHORT_GI);
+ break;
+ case WMI_RATE_PREAMBLE_HT:
+ arsta->tx_info.status.rates[0].idx =
+ txrate.mcs + ((txrate.nss - 1) * 8);
+ if (sgi)
+ arsta->tx_info.status.rates[0].flags |=
+ IEEE80211_TX_RC_SHORT_GI;
+ arsta->tx_info.status.rates[0].flags |= IEEE80211_TX_RC_MCS;
+ break;
+ case WMI_RATE_PREAMBLE_VHT:
+ ieee80211_rate_set_vht(&arsta->tx_info.status.rates[0],
+ txrate.mcs, txrate.nss);
+ if (sgi)
+ arsta->tx_info.status.rates[0].flags |=
+ IEEE80211_TX_RC_SHORT_GI;
+ arsta->tx_info.status.rates[0].flags |= IEEE80211_TX_RC_VHT_MCS;
+ break;
+ }
arsta->txrate.nss = txrate.nss;
arsta->txrate.bw = ath10k_bw_to_mac80211_bw(txrate.bw);
+ if (sgi)
+ arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+ switch (arsta->txrate.bw) {
+ case RATE_INFO_BW_40:
+ arsta->tx_info.status.rates[0].flags |=
+ IEEE80211_TX_RC_40_MHZ_WIDTH;
+ break;
+ case RATE_INFO_BW_80:
+ arsta->tx_info.status.rates[0].flags |=
+ IEEE80211_TX_RC_80_MHZ_WIDTH;
+ break;
+ }
+
+ if (peer_stats->succ_pkts) {
+ arsta->tx_info.flags = IEEE80211_TX_STAT_ACK;
+ arsta->tx_info.status.rates[0].count = 1;
+ ieee80211_tx_rate_update(ar->hw, sta, &arsta->tx_info);
+ }
if (ath10k_debug_is_extd_tx_stats_enabled(ar))
ath10k_accumulate_per_peer_tx_stats(ar, arsta, peer_stats,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 300f20523204..ef41a0b827f2 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4984,6 +4984,7 @@ enum wmi_rate_preamble {
(((preamble) << 6) | ((nss) << 4) | (rate))
#define ATH10K_HW_AMPDU(flags) ((flags) & 0x1)
#define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3)
+#define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1)
#define ATH10K_VHT_MCS_NUM 10
#define ATH10K_BW_NUM 4
--
1.7.9.5
Anilkumar Kolli <[email protected]> wrote:
> Mesh path metric needs tx rate information from ieee80211_tx_status()
> call but in ath10k there is no mechanism to report tx rate information
> via ieee80211_tx_status(), the tx rate is only accessible via
> sta_statiscs() op.
>
> Per peer tx stats has tx rate info available, Tx rate is available
> to ath10k driver after every 4 PPDU sent in the air. For each PPDU,
> ath10k driver updates rate informattion to mac80211 using
> ieee80211_tx_rate_update().
>
> Per peer txrate information is updated through per peer statistics
> and is available for QCA9888/QCA9984/QCA4019/QCA998X only
>
> Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00053
> Tested on QCA998X with firmware-5.bin_10.2.4-1.0-00036
>
> Signed-off-by: Anilkumar Kolli <[email protected]>
Depends on:
f8252e7b5a83 mac80211: implement ieee80211_tx_rate_update to update rate
Currently in mac80211-next.
--
https://patchwork.kernel.org/patch/10636627/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
On 2018-10-12 17:05, Kalle Valo wrote:
> Anilkumar Kolli <[email protected]> wrote:
>
>> Mesh path metric needs tx rate information from ieee80211_tx_status()
>> call but in ath10k there is no mechanism to report tx rate information
>> via ieee80211_tx_status(), the tx rate is only accessible via
>> sta_statiscs() op.
>>
>> Per peer tx stats has tx rate info available, Tx rate is available
>> to ath10k driver after every 4 PPDU sent in the air. For each PPDU,
>> ath10k driver updates rate informattion to mac80211 using
>> ieee80211_tx_rate_update().
>>
>> Per peer txrate information is updated through per peer statistics
>> and is available for QCA9888/QCA9984/QCA4019/QCA998X only
>>
>> Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00053
>> Tested on QCA998X with firmware-5.bin_10.2.4-1.0-00036
>>
>> Signed-off-by: Anilkumar Kolli <[email protected]>
>
> Depends on:
>
> f8252e7b5a83 mac80211: implement ieee80211_tx_rate_update to update
> rate
>
> Currently in mac80211-next.
mac80211 dependent patch is merged.
Please drop this patch, I have rebased this patch on latest ath.git,
and posted v2 https://patchwork.kernel.org/patch/10656927/
--
Thanks
Anil.