The buffer state is already cleared in ATH_TXBUF_RESET.
Remove redundant code clearing the type variable.
Signed-off-by: Sujith <[email protected]>
---
drivers/net/wireless/ath9k/xmit.c | 28 +++++++++++-----------------
1 files changed, 11 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 0d05a7f..1b83673 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -1576,27 +1576,21 @@ static int ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf,
bf->bf_frmlen = skb->len + FCS_LEN - (hdrlen & 3);
- ieee80211_is_data(fc) ?
- (bf->bf_state.bf_type |= BUF_DATA) :
- (bf->bf_state.bf_type &= ~BUF_DATA);
- ieee80211_is_back_req(fc) ?
- (bf->bf_state.bf_type |= BUF_BAR) :
- (bf->bf_state.bf_type &= ~BUF_BAR);
- ieee80211_is_pspoll(fc) ?
- (bf->bf_state.bf_type |= BUF_PSPOLL) :
- (bf->bf_state.bf_type &= ~BUF_PSPOLL);
- (sc->sc_flags & SC_OP_PREAMBLE_SHORT) ?
- (bf->bf_state.bf_type |= BUF_SHORT_PREAMBLE) :
- (bf->bf_state.bf_type &= ~BUF_SHORT_PREAMBLE);
- (conf_is_ht(&sc->hw->conf) && !is_pae(skb) &&
- (tx_info->flags & IEEE80211_TX_CTL_AMPDU)) ?
- (bf->bf_state.bf_type |= BUF_HT) :
- (bf->bf_state.bf_type &= ~BUF_HT);
+ if (ieee80211_is_data(fc))
+ bf->bf_state.bf_type |= BUF_DATA;
+ if (ieee80211_is_back_req(fc))
+ bf->bf_state.bf_type |= BUF_BAR;
+ if (ieee80211_is_pspoll(fc))
+ bf->bf_state.bf_type |= BUF_PSPOLL;
+ if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
+ bf->bf_state.bf_type |= BUF_SHORT_PREAMBLE;
+ if ((conf_is_ht(&sc->hw->conf) && !is_pae(skb) &&
+ (tx_info->flags & IEEE80211_TX_CTL_AMPDU)))
+ bf->bf_state.bf_type |= BUF_HT;
bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq);
bf->bf_keytype = get_hw_crypto_keytype(skb);
-
if (bf->bf_keytype != ATH9K_KEY_TYPE_CLEAR) {
bf->bf_frmlen += tx_info->control.hw_key->icv_len;
bf->bf_keyix = tx_info->control.hw_key->hw_key_idx;
--
1.6.0.3