Setting up the CAB queue requires only the beacon interval,
remove the function ath_get_beaconconfig() which is redundant.
Signed-off-by: Sujith <[email protected]>
---
drivers/net/wireless/ath9k/xmit.c | 19 ++-----------------
1 files changed, 2 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 84fd3ee..363bb2a 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -772,19 +772,6 @@ bool ath_tx_aggr_check(struct ath_softc *sc, struct ath_node *an, u8 tidno)
/* Queue Management */
/********************/
-static void ath_get_beaconconfig(struct ath_softc *sc, int if_id,
- struct ath_beacon_config *conf)
-{
- struct ieee80211_hw *hw = sc->hw;
-
- /* fill in beacon config data */
-
- conf->beacon_interval = hw->conf.beacon_int;
- conf->listen_interval = 100;
- conf->dtim_count = 1;
- conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval;
-}
-
static void ath_txq_drain_pending_buffers(struct ath_softc *sc,
struct ath_txq *txq)
{
@@ -959,7 +946,6 @@ int ath_cabq_update(struct ath_softc *sc)
{
struct ath9k_tx_queue_info qi;
int qnum = sc->beacon.cabq->axq_qnum;
- struct ath_beacon_config conf;
ath9k_hw_get_txq_props(sc->sc_ah, qnum, &qi);
/*
@@ -970,9 +956,8 @@ int ath_cabq_update(struct ath_softc *sc)
else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
- ath_get_beaconconfig(sc, ATH_IF_ID_ANY, &conf);
- qi.tqi_readyTime =
- (conf.beacon_interval * sc->config.cabqReadytime) / 100;
+ qi.tqi_readyTime = (sc->hw->conf.beacon_int *
+ sc->config.cabqReadytime) / 100;
ath_txq_update(sc, qnum, &qi);
return 0;
--
1.6.1