Signed-off-by: Sujith <[email protected]>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 -
drivers/net/wireless/ath/ath9k/xmit.c | 24 ++++++++++--------------
2 files changed, 10 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 9d01d99..e94e8f9 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -190,7 +190,6 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd,
#define ATH_AGGR_MIN_QDEPTH 2
#define ATH_AMPDU_SUBFRAME_DEFAULT 32
#define ATH_AMPDU_LIMIT_MAX (64 * 1024 - 1)
-#define ATH_AMPDU_LIMIT_DEFAULT ATH_AMPDU_LIMIT_MAX
#define IEEE80211_SEQ_SEQ_SHIFT 4
#define IEEE80211_SEQ_MAX 4096
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index fd07aa1..b7806e2 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -458,7 +458,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
struct ieee80211_tx_rate *rates;
struct ath_tx_info_priv *tx_info_priv;
u32 max_4ms_framelen, frmlen;
- u16 aggr_limit, legacy = 0, maxampdu;
+ u16 aggr_limit, legacy = 0;
int i;
skb = bf->bf_mpdu;
@@ -493,16 +493,15 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
if (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE || legacy)
return 0;
- aggr_limit = min(max_4ms_framelen, (u32)ATH_AMPDU_LIMIT_DEFAULT);
+ aggr_limit = min(max_4ms_framelen, (u32)ATH_AMPDU_LIMIT_MAX);
/*
* h/w can accept aggregates upto 16 bit lengths (65535).
* The IE, however can hold upto 65536, which shows up here
* as zero. Ignore 65536 since we are constrained by hw.
*/
- maxampdu = tid->an->maxampdu;
- if (maxampdu)
- aggr_limit = min(aggr_limit, maxampdu);
+ if (tid->an->maxampdu)
+ aggr_limit = min(aggr_limit, tid->an->maxampdu);
return aggr_limit;
}
@@ -510,7 +509,6 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
/*
* Returns the number of delimiters to be added to
* meet the minimum required mpdudensity.
- * caller should make sure that the rate is HT rate .
*/
static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
struct ath_buf *bf, u16 frmlen)
@@ -518,7 +516,7 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
const struct ath_rate_table *rt = sc->cur_rate_table;
struct sk_buff *skb = bf->bf_mpdu;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
- u32 nsymbits, nsymbols, mpdudensity;
+ u32 nsymbits, nsymbols;
u16 minlen;
u8 rc, flags, rix;
int width, half_gi, ndelim, mindelim;
@@ -540,14 +538,12 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
* on highest rate in rate series (i.e. first rate) to determine
* required minimum length for subframe. Take into account
* whether high rate is 20 or 40Mhz and half or full GI.
- */
- mpdudensity = tid->an->mpdudensity;
-
- /*
+ *
* If there is no mpdu density restriction, no further calculation
* is needed.
*/
- if (mpdudensity == 0)
+
+ if (tid->an->mpdudensity == 0)
return ndelim;
rix = tx_info->control.rates[0].idx;
@@ -557,9 +553,9 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
half_gi = (flags & IEEE80211_TX_RC_SHORT_GI) ? 1 : 0;
if (half_gi)
- nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(mpdudensity);
+ nsymbols = NUM_SYMBOLS_PER_USEC_HALFGI(tid->an->mpdudensity);
else
- nsymbols = NUM_SYMBOLS_PER_USEC(mpdudensity);
+ nsymbols = NUM_SYMBOLS_PER_USEC(tid->an->mpdudensity);
if (nsymbols == 0)
nsymbols = 1;
--
1.6.3.3