When processing MIB interrupts, OFDM and CCK error
handling routines for low RSSI values have to be invoked
only when the channel mode is 11G/11B. Since HT channels
will also fall under the bands 2Ghz/5Ghz, check appropriately.
Signed-off-by: Sujith <[email protected]>
---
This patch would apply over Luis' pending patches.
drivers/net/wireless/ath/ath9k/ani.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index f5cd7da..e4f9559 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -327,7 +327,8 @@ static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
aniState->firstepLevel + 1);
return;
} else {
- if (conf->channel->band == IEEE80211_BAND_2GHZ) {
+ if ((conf->channel->band == IEEE80211_BAND_2GHZ) &&
+ !conf_is_ht(conf)) {
if (!aniState->ofdmWeakSigDetectOff)
ath9k_hw_ani_control(ah,
ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
@@ -369,7 +370,8 @@ static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL,
aniState->firstepLevel + 1);
} else {
- if (conf->channel->band == IEEE80211_BAND_2GHZ) {
+ if ((conf->channel->band == IEEE80211_BAND_2GHZ) &&
+ !conf_is_ht(conf)) {
if (aniState->firstepLevel > 0)
ath9k_hw_ani_control(ah,
ATH9K_ANI_FIRSTEP_LEVEL, 0);
--
1.6.4.2