From: Senthil Balasubramanian <[email protected]>
This has to be done if the EEPROM supports FCC Midband
capability.
Signed-off-by: Senthil Balasubramanian <[email protected]>
---
drivers/net/wireless/ath/ath9k/eeprom.h | 1 +
drivers/net/wireless/ath/ath9k/hw.c | 5 ++++-
2 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 8463ba0..3349274 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -639,6 +639,7 @@ struct ar9287_eeprom {
} __packed;
enum reg_ext_bitmap {
+ REG_EXT_FCC_MIDBAND = 0,
REG_EXT_JAPAN_MIDBAND = 1,
REG_EXT_FCC_DFS_HT40 = 2,
REG_EXT_JAPAN_NONDFS_HT40 = 3,
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 99c0dac..f74604d 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -3660,7 +3660,10 @@ void ath9k_hw_fill_cap_info(struct ath_hw *ah)
AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN;
}
- pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
+ /* Advertise midband for AR5416 with FCC midband set in eeprom */
+ if (regulatory->current_rd_ext & (1 << REG_EXT_FCC_MIDBAND) &&
+ AR_SREV_5416(ah))
+ pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
pCap->num_antcfg_5ghz =
ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_5GHZ);
--
1.6.4.4