There is no reason to disable the PHY Error / MIB counters
when the module is being unloaded.
Signed-off-by: Sujith <[email protected]>
---
drivers/net/wireless/ath/ath9k/ani.c | 9 ---------
drivers/net/wireless/ath/ath9k/ani.h | 1 -
drivers/net/wireless/ath/ath9k/hw.c | 3 ---
3 files changed, 0 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index cec62d3..ba8b20f 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -657,12 +657,3 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
if (ah->config.enable_ani)
ah->proc_phyerr |= HAL_PROCESS_ANI;
}
-
-void ath9k_hw_ani_disable(struct ath_hw *ah)
-{
- ath_print(ath9k_hw_common(ah), ATH_DBG_ANI, "Disabling ANI\n");
-
- ath9k_hw_disable_mib_counters(ah);
- REG_WRITE(ah, AR_PHY_ERR_1, 0);
- REG_WRITE(ah, AR_PHY_ERR_2, 0);
-}
diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h
index 4e1ab94..3356762 100644
--- a/drivers/net/wireless/ath/ath9k/ani.h
+++ b/drivers/net/wireless/ath/ath9k/ani.h
@@ -118,6 +118,5 @@ u32 ath9k_hw_GetMibCycleCountsPct(struct ath_hw *ah, u32 *rxc_pcnt,
void ath9k_hw_procmibevent(struct ath_hw *ah);
void ath9k_hw_ani_setup(struct ath_hw *ah);
void ath9k_hw_ani_init(struct ath_hw *ah);
-void ath9k_hw_ani_disable(struct ath_hw *ah);
#endif /* ANI_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 5a29048..2d18892 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -819,9 +819,6 @@ void ath9k_hw_deinit(struct ath_hw *ah)
if (common->state < ATH_HW_INITIALIZED)
goto free_hw;
- if (!AR_SREV_9100(ah))
- ath9k_hw_ani_disable(ah);
-
ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
free_hw:
--
1.7.0.5