This removes passive_scan handler that was removed from mac80211.
Signed-off-by: Jiri Benc <[email protected]>
---
drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 22 ----
drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 22 ----
drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 22 ----
drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 57 -----------
drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 2
drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 119 -----------------------
drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 24 ----
drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 24 ----
8 files changed, 292 deletions(-)
--- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
+++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
@@ -1196,12 +1196,6 @@ static void rt2400pci_uninitialize(struc
return;
/*
- * Cancel scanning.
- */
- if (rt2x00dev->scan)
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
-
- /*
* Flush out all pending work.
*/
flush_workqueue(rt2x00dev->workqueue);
@@ -1612,16 +1606,6 @@ static void rt2400pci_txdone(struct work
}
/*
- * Check if we are waiting on an empty queue
- * to start scanning.
- */
- if (rt2x00dev->scan &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_TX]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_ATIM]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
-
- /*
* If the data ring was full before the txdone handler
* we must make sure the packet queue in the mac80211 stack
* is reenabled when the txdone handler has finished.
@@ -1832,7 +1816,6 @@ static const struct ieee80211_ops rt2400
.config = rt2x00lib_config,
.config_interface = rt2x00lib_config_interface,
.set_multicast_list = rt2x00lib_set_multicast_list,
- .passive_scan = rt2x00lib_passive_scan,
.get_stats = rt2400pci_get_stats,
.set_retry_limit = rt2400pci_set_retry_limit,
.conf_tx = rt2400pci_conf_tx,
@@ -2310,11 +2293,6 @@ static int rt2400pci_alloc_dev(struct pc
rt2x00dev->interface.type = -EINVAL;
/*
- * Intialize scanning attributes.
- */
- rt2x00dev->scan = NULL;
-
- /*
* Allocate ring array.
*/
if (rt2400pci_alloc_rings(rt2x00dev))
--- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
+++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
@@ -1322,12 +1322,6 @@ static void rt2500pci_uninitialize(struc
return;
/*
- * Cancel scanning.
- */
- if (rt2x00dev->scan)
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
-
- /*
* Flush out all pending work.
*/
flush_workqueue(rt2x00dev->workqueue);
@@ -1778,16 +1772,6 @@ static void rt2500pci_txdone(struct work
}
/*
- * Check if we are waiting on an empty queue
- * to start scanning.
- */
- if (rt2x00dev->scan &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_TX]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_ATIM]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
-
- /*
* If the data ring was full before the txdone handler
* we must make sure the packet queue in the mac80211 stack
* is reenabled when the txdone handler has finished.
@@ -1973,7 +1957,6 @@ static const struct ieee80211_ops rt2500
.config = rt2x00lib_config,
.config_interface = rt2x00lib_config_interface,
.set_multicast_list = rt2x00lib_set_multicast_list,
- .passive_scan = rt2x00lib_passive_scan,
.get_stats = rt2500pci_get_stats,
.set_retry_limit = rt2500pci_set_retry_limit,
.conf_tx = rt2x00lib_conf_tx,
@@ -2607,11 +2590,6 @@ static int rt2500pci_alloc_dev(struct pc
rt2x00dev->interface.type = -EINVAL;
/*
- * Intialize scanning attributes.
- */
- rt2x00dev->scan = NULL;
-
- /*
* Allocate ring array.
*/
if (rt2500pci_alloc_rings(rt2x00dev))
--- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
+++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
@@ -1246,12 +1246,6 @@ static void rt2500usb_uninitialize(struc
return;
/*
- * Cancel scanning.
- */
- if (rt2x00dev->scan)
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
-
- /*
* Flush out all pending work.
*/
flush_workqueue(rt2x00dev->workqueue);
@@ -1731,16 +1725,6 @@ static void rt2500usb_interrupt_txdone(s
rt2x00_ring_index_done_inc(entry->ring);
/*
- * Check if we are waiting on an empty queue
- * to start scanning.
- */
- if (rt2x00dev->scan &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_TX]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_ATIM]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
-
- /*
* If the data ring was full before the txdone handler
* we must make sure the packet queue in the mac80211 stack
* is reenabled when the txdone handler has finished.
@@ -1878,7 +1862,6 @@ static const struct ieee80211_ops rt2500
.config = rt2x00lib_config,
.config_interface = rt2x00lib_config_interface,
.set_multicast_list = rt2x00lib_set_multicast_list,
- .passive_scan = rt2x00lib_passive_scan,
.get_stats = rt2500usb_get_stats,
.conf_tx = rt2x00lib_conf_tx,
.get_tx_stats = rt2x00lib_get_tx_stats,
@@ -2433,11 +2416,6 @@ static int rt2500usb_alloc_dev(struct us
rt2x00dev->interface.type = -EINVAL;
/*
- * Intialize scanning attributes.
- */
- rt2x00dev->scan = NULL;
-
- /*
* Allocate ring array.
*/
if (rt2500usb_alloc_rings(rt2x00dev))
--- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2x00.h
+++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2x00.h
@@ -646,58 +646,6 @@ struct interface {
};
/*
- * Scanning structure.
- * Swithing channel during scanning will be put
- * in a workqueue so we will be able to sleep
- * during the switch.
- * We also make use of the completion structure
- * in case a frame must be send before a
- * channel switch.
- */
-struct scanning {
- /*
- * Pointer to main rt2x00dev structure where this
- * scanning structure belongs to.
- */
- struct rt2x00_dev *rt2x00dev;
-
- /*
- * Completion structure if an packet needs to be send.
- */
- struct completion completion;
-
- /*
- * Scanning parameters.
- */
- struct ieee80211_scan_conf conf;
-
- /*
- * Scanning state: IEEE80211_SCAN_START or IEEE80211_SCAN_END.
- */
- short state;
-
- /*
- * Flag to see if this scan has been cancelled.
- */
- short status;
-#define SCANNING_READY 0x0000
-#define SCANNING_WAITING 0x0001
-#define SCANNING_CANCELLED 0x0002
-
- /*
- * Work structure for scheduling the scanning work.
- */
- struct work_struct work;
-};
-
-static inline void rt2x00_signal_scan(struct scanning *scan, short status)
-{
- scan->status = status;
-
- complete_all(&scan->completion);
-}
-
-/*
* rt2x00lib callback functions.
*/
struct rt2x00lib_ops {
@@ -886,11 +834,6 @@ struct rt2x00_dev {
struct ieee80211_rx_status rx_status;
/*
- * Scanning structure.
- */
- struct scanning *scan;
-
- /*
* Data rings for both RX and TX.
* The first entries must be the normal TX
* rings, followed by a possible ATIM ring
--- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h
+++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h
@@ -70,8 +70,6 @@ int rt2x00lib_config_interface(struct ie
struct ieee80211_if_conf *conf);
void rt2x00lib_set_multicast_list(struct ieee80211_hw *hw,
unsigned short flags, int mc_count);
-int rt2x00lib_passive_scan(struct ieee80211_hw *hw,
- int state, struct ieee80211_scan_conf *conf);
int rt2x00lib_get_tx_stats(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats);
int rt2x00lib_conf_tx(struct ieee80211_hw *hw, int queue,
--- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c
+++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c
@@ -369,125 +369,6 @@ void rt2x00lib_set_multicast_list(struct
}
EXPORT_SYMBOL_GPL(rt2x00lib_set_multicast_list);
-static void rt2x00lib_scan(struct work_struct *work)
-{
- struct scanning *scan =
- container_of(work, struct scanning, work);
-
- if (unlikely(!scan->rt2x00dev))
- return;
-
- /*
- * Before we can start switch the channel for scanning
- * we need to wait until all TX rings are empty to guarantee
- * that all frames are send on the correct channel.
- * Check if the status is set SCANNING_WAITING in order to
- * start waiting, or if it is set to SCANNING_CANCELLED which
- * means that we shouldn't proceed with the scanning.
- */
- if (scan->status == SCANNING_WAITING)
- wait_for_completion(&scan->completion);
- if (scan->status == SCANNING_CANCELLED)
- goto exit;
-
- /*
- * Switch channel and update active info for RX.
- */
- if (scan->state == IEEE80211_SCAN_START) {
- scan->rt2x00dev->lib_ops->config_phymode(
- scan->rt2x00dev,
- scan->conf.scan_phymode);
-
- scan->rt2x00dev->lib_ops->config_channel(
- scan->rt2x00dev,
- scan->conf.scan_channel_val,
- scan->conf.scan_channel,
- scan->conf.scan_freq,
- scan->conf.scan_power_level);
- } else {
- scan->rt2x00dev->lib_ops->config_phymode(
- scan->rt2x00dev,
- scan->conf.running_phymode);
-
- scan->rt2x00dev->lib_ops->config_channel(
- scan->rt2x00dev,
- scan->conf.running_channel_val,
- scan->conf.running_channel,
- scan->conf.running_freq,
- scan->conf.scan_power_level);
- }
-
-exit:
- scan->rt2x00dev->scan = NULL;
- kfree(scan);
-}
-
-int rt2x00lib_passive_scan(struct ieee80211_hw *hw,
- int state, struct ieee80211_scan_conf *conf)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
-
- /*
- * Check if we are not busy with the previous
- * passive scan request.
- */
- if (rt2x00dev->scan)
- return -EBUSY;
-
- /*
- * Check if the radio is enabled.
- */
- if (!GET_FLAG(rt2x00dev, DEVICE_ENABLED_RADIO))
- return -EIO;
-
- /*
- * Allocate scanning structure to store scanning info.
- */
- rt2x00dev->scan = kzalloc(sizeof(struct scanning), GFP_ATOMIC);
- if (!rt2x00dev->scan)
- return -ENOMEM;
-
- /*
- * Initialize Scanning structure.
- */
- rt2x00dev->scan->rt2x00dev = rt2x00dev;
- rt2x00dev->scan->state = state;
- memcpy(&rt2x00dev->scan->conf, conf, sizeof(*conf));
-
- /*
- * Initialize completion handler.
- * Set initial status to SCANNING_WAITING to prevent scanning
- * to begin while there are still TX packets queued.
- */
- init_completion(&rt2x00dev->scan->completion);
- rt2x00dev->scan->status = SCANNING_WAITING;
-
- /*
- * Check if we have to send a packet before the
- * channel switch.
- */
- if (conf->skb) {
- if (rt2x00dev->hw_ops->tx(hw, conf->skb, conf->tx_control))
- goto exit;
- }
-
- /*
- * Queue work.
- */
- INIT_WORK(&rt2x00dev->scan->work, rt2x00lib_scan);
- if (!queue_work(rt2x00dev->workqueue, &rt2x00dev->scan->work))
- goto exit;
-
- return 0;
-
-exit:
- kfree(rt2x00dev->scan);
- rt2x00dev->scan = NULL;
-
- return -EIO;
-}
-EXPORT_SYMBOL_GPL(rt2x00lib_passive_scan);
-
int rt2x00lib_get_tx_stats(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats)
{
--- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
+++ dscape/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
@@ -1592,12 +1592,6 @@ static void rt61pci_uninitialize(struct
return;
/*
- * Cancel scanning.
- */
- if (rt2x00dev->scan)
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
-
- /*
* Flush out all pending work.
*/
flush_workqueue(rt2x00dev->workqueue);
@@ -2073,18 +2067,6 @@ static void rt61pci_txdone(struct work_s
}
/*
- * Check if we are waiting on an empty queue
- * to start scanning.
- */
- if (rt2x00dev->scan &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_VO]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_VI]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_BE]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_BK]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
-
- /*
* If the data ring was full before the txdone handler
* we must make sure the packet queue in the mac80211 stack
* is reenabled when the txdone handler has finished.
@@ -2280,7 +2262,6 @@ static const struct ieee80211_ops rt61pc
.config = rt2x00lib_config,
.config_interface = rt2x00lib_config_interface,
.set_multicast_list = rt2x00lib_set_multicast_list,
- .passive_scan = rt2x00lib_passive_scan,
.get_stats = rt61pci_get_stats,
.set_retry_limit = rt61pci_set_retry_limit,
.conf_tx = rt2x00lib_conf_tx,
@@ -3072,11 +3053,6 @@ static int rt61pci_alloc_dev(struct pci_
rt2x00dev->interface.type = -EINVAL;
/*
- * Initialize scanning attributes.
- */
- rt2x00dev->scan = NULL;
-
- /*
* Allocate ring array.
*/
if (rt61pci_alloc_rings(rt2x00dev))
--- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
+++ dscape/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
@@ -1375,12 +1375,6 @@ static void rt73usb_uninitialize(struct
return;
/*
- * Cancel scanning.
- */
- if (rt2x00dev->scan)
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
-
- /*
* Flush out all pending work.
*/
flush_workqueue(rt2x00dev->workqueue);
@@ -1877,18 +1871,6 @@ static void rt73usb_interrupt_txdone(str
rt2x00_ring_index_done_inc(entry->ring);
/*
- * Check if we are waiting on an empty queue
- * to start scanning.
- */
- if (rt2x00dev->scan &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_VO]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_VI]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_BE]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_BK]) &&
- rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
- rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
-
- /*
* If the data ring was full before the txdone handler
* we must make sure the packet queue in the mac80211 stack
* is reenabled when the txdone handler has finished.
@@ -2053,7 +2035,6 @@ static const struct ieee80211_ops rt73us
.config = rt2x00lib_config,
.config_interface = rt2x00lib_config_interface,
.set_multicast_list = rt2x00lib_set_multicast_list,
- .passive_scan = rt2x00lib_passive_scan,
.get_stats = rt73usb_get_stats,
.set_retry_limit = rt73usb_set_retry_limit,
.conf_tx = rt2x00lib_conf_tx,
@@ -2720,11 +2701,6 @@ static int rt73usb_alloc_dev(struct usb_
rt2x00dev->interface.type = -EINVAL;
/*
- * Intialize scanning attributes.
- */
- rt2x00dev->scan = NULL;
-
- /*
* Allocate ring array.
*/
if (rt73usb_alloc_rings(rt2x00dev))
--
Jiri Benc
SUSE Labs
On Sun, 29 Apr 2007 16:02:46 +0200, Ivo van Doorn wrote:
> Ehm, please check my rt2x00 git pull request of yesterday. ;)
> To quote myself:
> "Perhaps the most interesting thing would be the removal
> of passive scan support, because it was a purely software based
> solution that (if really required) could best be resolved in mac80211
> rather then the driver for devices that don't support such a thing in the
> hardware."
Didn't notice that :-)
> When John pulls the upstream branch of rt2x00 git, passive scanning will
> already be removed. :)
Nice. Thanks.
Jiri
--
Jiri Benc
SUSE Labs
On Sunday 29 April 2007 15:57, Jiri Benc wrote:
> This removes passive_scan handler that was removed from mac80211.
Ehm, please check my rt2x00 git pull request of yesterday. ;)
To quote myself:
"Perhaps the most interesting thing would be the removal
of passive scan support, because it was a purely software based
solution that (if really required) could best be resolved in mac80211
rather then the driver for devices that don't support such a thing in the
hardware."
When John pulls the upstream branch of rt2x00 git, passive scanning will already be removed. :)
Ivo
> Signed-off-by: Jiri Benc <[email protected]>
>
> ---
> drivers/net/wireless/mac80211/rt2x00/rt2400pci.c | 22 ----
> drivers/net/wireless/mac80211/rt2x00/rt2500pci.c | 22 ----
> drivers/net/wireless/mac80211/rt2x00/rt2500usb.c | 22 ----
> drivers/net/wireless/mac80211/rt2x00/rt2x00.h | 57 -----------
> drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h | 2
> drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c | 119 -----------------------
> drivers/net/wireless/mac80211/rt2x00/rt61pci.c | 24 ----
> drivers/net/wireless/mac80211/rt2x00/rt73usb.c | 24 ----
> 8 files changed, 292 deletions(-)
>
> --- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
> +++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2400pci.c
> @@ -1196,12 +1196,6 @@ static void rt2400pci_uninitialize(struc
> return;
>
> /*
> - * Cancel scanning.
> - */
> - if (rt2x00dev->scan)
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
> -
> - /*
> * Flush out all pending work.
> */
> flush_workqueue(rt2x00dev->workqueue);
> @@ -1612,16 +1606,6 @@ static void rt2400pci_txdone(struct work
> }
>
> /*
> - * Check if we are waiting on an empty queue
> - * to start scanning.
> - */
> - if (rt2x00dev->scan &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_TX]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_ATIM]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
> -
> - /*
> * If the data ring was full before the txdone handler
> * we must make sure the packet queue in the mac80211 stack
> * is reenabled when the txdone handler has finished.
> @@ -1832,7 +1816,6 @@ static const struct ieee80211_ops rt2400
> .config = rt2x00lib_config,
> .config_interface = rt2x00lib_config_interface,
> .set_multicast_list = rt2x00lib_set_multicast_list,
> - .passive_scan = rt2x00lib_passive_scan,
> .get_stats = rt2400pci_get_stats,
> .set_retry_limit = rt2400pci_set_retry_limit,
> .conf_tx = rt2400pci_conf_tx,
> @@ -2310,11 +2293,6 @@ static int rt2400pci_alloc_dev(struct pc
> rt2x00dev->interface.type = -EINVAL;
>
> /*
> - * Intialize scanning attributes.
> - */
> - rt2x00dev->scan = NULL;
> -
> - /*
> * Allocate ring array.
> */
> if (rt2400pci_alloc_rings(rt2x00dev))
> --- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
> +++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2500pci.c
> @@ -1322,12 +1322,6 @@ static void rt2500pci_uninitialize(struc
> return;
>
> /*
> - * Cancel scanning.
> - */
> - if (rt2x00dev->scan)
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
> -
> - /*
> * Flush out all pending work.
> */
> flush_workqueue(rt2x00dev->workqueue);
> @@ -1778,16 +1772,6 @@ static void rt2500pci_txdone(struct work
> }
>
> /*
> - * Check if we are waiting on an empty queue
> - * to start scanning.
> - */
> - if (rt2x00dev->scan &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_TX]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_ATIM]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
> -
> - /*
> * If the data ring was full before the txdone handler
> * we must make sure the packet queue in the mac80211 stack
> * is reenabled when the txdone handler has finished.
> @@ -1973,7 +1957,6 @@ static const struct ieee80211_ops rt2500
> .config = rt2x00lib_config,
> .config_interface = rt2x00lib_config_interface,
> .set_multicast_list = rt2x00lib_set_multicast_list,
> - .passive_scan = rt2x00lib_passive_scan,
> .get_stats = rt2500pci_get_stats,
> .set_retry_limit = rt2500pci_set_retry_limit,
> .conf_tx = rt2x00lib_conf_tx,
> @@ -2607,11 +2590,6 @@ static int rt2500pci_alloc_dev(struct pc
> rt2x00dev->interface.type = -EINVAL;
>
> /*
> - * Intialize scanning attributes.
> - */
> - rt2x00dev->scan = NULL;
> -
> - /*
> * Allocate ring array.
> */
> if (rt2500pci_alloc_rings(rt2x00dev))
> --- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
> +++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2500usb.c
> @@ -1246,12 +1246,6 @@ static void rt2500usb_uninitialize(struc
> return;
>
> /*
> - * Cancel scanning.
> - */
> - if (rt2x00dev->scan)
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
> -
> - /*
> * Flush out all pending work.
> */
> flush_workqueue(rt2x00dev->workqueue);
> @@ -1731,16 +1725,6 @@ static void rt2500usb_interrupt_txdone(s
> rt2x00_ring_index_done_inc(entry->ring);
>
> /*
> - * Check if we are waiting on an empty queue
> - * to start scanning.
> - */
> - if (rt2x00dev->scan &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_TX]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_ATIM]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
> -
> - /*
> * If the data ring was full before the txdone handler
> * we must make sure the packet queue in the mac80211 stack
> * is reenabled when the txdone handler has finished.
> @@ -1878,7 +1862,6 @@ static const struct ieee80211_ops rt2500
> .config = rt2x00lib_config,
> .config_interface = rt2x00lib_config_interface,
> .set_multicast_list = rt2x00lib_set_multicast_list,
> - .passive_scan = rt2x00lib_passive_scan,
> .get_stats = rt2500usb_get_stats,
> .conf_tx = rt2x00lib_conf_tx,
> .get_tx_stats = rt2x00lib_get_tx_stats,
> @@ -2433,11 +2416,6 @@ static int rt2500usb_alloc_dev(struct us
> rt2x00dev->interface.type = -EINVAL;
>
> /*
> - * Intialize scanning attributes.
> - */
> - rt2x00dev->scan = NULL;
> -
> - /*
> * Allocate ring array.
> */
> if (rt2500usb_alloc_rings(rt2x00dev))
> --- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2x00.h
> +++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2x00.h
> @@ -646,58 +646,6 @@ struct interface {
> };
>
> /*
> - * Scanning structure.
> - * Swithing channel during scanning will be put
> - * in a workqueue so we will be able to sleep
> - * during the switch.
> - * We also make use of the completion structure
> - * in case a frame must be send before a
> - * channel switch.
> - */
> -struct scanning {
> - /*
> - * Pointer to main rt2x00dev structure where this
> - * scanning structure belongs to.
> - */
> - struct rt2x00_dev *rt2x00dev;
> -
> - /*
> - * Completion structure if an packet needs to be send.
> - */
> - struct completion completion;
> -
> - /*
> - * Scanning parameters.
> - */
> - struct ieee80211_scan_conf conf;
> -
> - /*
> - * Scanning state: IEEE80211_SCAN_START or IEEE80211_SCAN_END.
> - */
> - short state;
> -
> - /*
> - * Flag to see if this scan has been cancelled.
> - */
> - short status;
> -#define SCANNING_READY 0x0000
> -#define SCANNING_WAITING 0x0001
> -#define SCANNING_CANCELLED 0x0002
> -
> - /*
> - * Work structure for scheduling the scanning work.
> - */
> - struct work_struct work;
> -};
> -
> -static inline void rt2x00_signal_scan(struct scanning *scan, short status)
> -{
> - scan->status = status;
> -
> - complete_all(&scan->completion);
> -}
> -
> -/*
> * rt2x00lib callback functions.
> */
> struct rt2x00lib_ops {
> @@ -886,11 +834,6 @@ struct rt2x00_dev {
> struct ieee80211_rx_status rx_status;
>
> /*
> - * Scanning structure.
> - */
> - struct scanning *scan;
> -
> - /*
> * Data rings for both RX and TX.
> * The first entries must be the normal TX
> * rings, followed by a possible ATIM ring
> --- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h
> +++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2x00lib.h
> @@ -70,8 +70,6 @@ int rt2x00lib_config_interface(struct ie
> struct ieee80211_if_conf *conf);
> void rt2x00lib_set_multicast_list(struct ieee80211_hw *hw,
> unsigned short flags, int mc_count);
> -int rt2x00lib_passive_scan(struct ieee80211_hw *hw,
> - int state, struct ieee80211_scan_conf *conf);
> int rt2x00lib_get_tx_stats(struct ieee80211_hw *hw,
> struct ieee80211_tx_queue_stats *stats);
> int rt2x00lib_conf_tx(struct ieee80211_hw *hw, int queue,
> --- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c
> +++ dscape/drivers/net/wireless/mac80211/rt2x00/rt2x00mac.c
> @@ -369,125 +369,6 @@ void rt2x00lib_set_multicast_list(struct
> }
> EXPORT_SYMBOL_GPL(rt2x00lib_set_multicast_list);
>
> -static void rt2x00lib_scan(struct work_struct *work)
> -{
> - struct scanning *scan =
> - container_of(work, struct scanning, work);
> -
> - if (unlikely(!scan->rt2x00dev))
> - return;
> -
> - /*
> - * Before we can start switch the channel for scanning
> - * we need to wait until all TX rings are empty to guarantee
> - * that all frames are send on the correct channel.
> - * Check if the status is set SCANNING_WAITING in order to
> - * start waiting, or if it is set to SCANNING_CANCELLED which
> - * means that we shouldn't proceed with the scanning.
> - */
> - if (scan->status == SCANNING_WAITING)
> - wait_for_completion(&scan->completion);
> - if (scan->status == SCANNING_CANCELLED)
> - goto exit;
> -
> - /*
> - * Switch channel and update active info for RX.
> - */
> - if (scan->state == IEEE80211_SCAN_START) {
> - scan->rt2x00dev->lib_ops->config_phymode(
> - scan->rt2x00dev,
> - scan->conf.scan_phymode);
> -
> - scan->rt2x00dev->lib_ops->config_channel(
> - scan->rt2x00dev,
> - scan->conf.scan_channel_val,
> - scan->conf.scan_channel,
> - scan->conf.scan_freq,
> - scan->conf.scan_power_level);
> - } else {
> - scan->rt2x00dev->lib_ops->config_phymode(
> - scan->rt2x00dev,
> - scan->conf.running_phymode);
> -
> - scan->rt2x00dev->lib_ops->config_channel(
> - scan->rt2x00dev,
> - scan->conf.running_channel_val,
> - scan->conf.running_channel,
> - scan->conf.running_freq,
> - scan->conf.scan_power_level);
> - }
> -
> -exit:
> - scan->rt2x00dev->scan = NULL;
> - kfree(scan);
> -}
> -
> -int rt2x00lib_passive_scan(struct ieee80211_hw *hw,
> - int state, struct ieee80211_scan_conf *conf)
> -{
> - struct rt2x00_dev *rt2x00dev = hw->priv;
> -
> - /*
> - * Check if we are not busy with the previous
> - * passive scan request.
> - */
> - if (rt2x00dev->scan)
> - return -EBUSY;
> -
> - /*
> - * Check if the radio is enabled.
> - */
> - if (!GET_FLAG(rt2x00dev, DEVICE_ENABLED_RADIO))
> - return -EIO;
> -
> - /*
> - * Allocate scanning structure to store scanning info.
> - */
> - rt2x00dev->scan = kzalloc(sizeof(struct scanning), GFP_ATOMIC);
> - if (!rt2x00dev->scan)
> - return -ENOMEM;
> -
> - /*
> - * Initialize Scanning structure.
> - */
> - rt2x00dev->scan->rt2x00dev = rt2x00dev;
> - rt2x00dev->scan->state = state;
> - memcpy(&rt2x00dev->scan->conf, conf, sizeof(*conf));
> -
> - /*
> - * Initialize completion handler.
> - * Set initial status to SCANNING_WAITING to prevent scanning
> - * to begin while there are still TX packets queued.
> - */
> - init_completion(&rt2x00dev->scan->completion);
> - rt2x00dev->scan->status = SCANNING_WAITING;
> -
> - /*
> - * Check if we have to send a packet before the
> - * channel switch.
> - */
> - if (conf->skb) {
> - if (rt2x00dev->hw_ops->tx(hw, conf->skb, conf->tx_control))
> - goto exit;
> - }
> -
> - /*
> - * Queue work.
> - */
> - INIT_WORK(&rt2x00dev->scan->work, rt2x00lib_scan);
> - if (!queue_work(rt2x00dev->workqueue, &rt2x00dev->scan->work))
> - goto exit;
> -
> - return 0;
> -
> -exit:
> - kfree(rt2x00dev->scan);
> - rt2x00dev->scan = NULL;
> -
> - return -EIO;
> -}
> -EXPORT_SYMBOL_GPL(rt2x00lib_passive_scan);
> -
> int rt2x00lib_get_tx_stats(struct ieee80211_hw *hw,
> struct ieee80211_tx_queue_stats *stats)
> {
> --- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
> +++ dscape/drivers/net/wireless/mac80211/rt2x00/rt61pci.c
> @@ -1592,12 +1592,6 @@ static void rt61pci_uninitialize(struct
> return;
>
> /*
> - * Cancel scanning.
> - */
> - if (rt2x00dev->scan)
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
> -
> - /*
> * Flush out all pending work.
> */
> flush_workqueue(rt2x00dev->workqueue);
> @@ -2073,18 +2067,6 @@ static void rt61pci_txdone(struct work_s
> }
>
> /*
> - * Check if we are waiting on an empty queue
> - * to start scanning.
> - */
> - if (rt2x00dev->scan &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_VO]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_VI]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_BE]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_BK]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
> -
> - /*
> * If the data ring was full before the txdone handler
> * we must make sure the packet queue in the mac80211 stack
> * is reenabled when the txdone handler has finished.
> @@ -2280,7 +2262,6 @@ static const struct ieee80211_ops rt61pc
> .config = rt2x00lib_config,
> .config_interface = rt2x00lib_config_interface,
> .set_multicast_list = rt2x00lib_set_multicast_list,
> - .passive_scan = rt2x00lib_passive_scan,
> .get_stats = rt61pci_get_stats,
> .set_retry_limit = rt61pci_set_retry_limit,
> .conf_tx = rt2x00lib_conf_tx,
> @@ -3072,11 +3053,6 @@ static int rt61pci_alloc_dev(struct pci_
> rt2x00dev->interface.type = -EINVAL;
>
> /*
> - * Initialize scanning attributes.
> - */
> - rt2x00dev->scan = NULL;
> -
> - /*
> * Allocate ring array.
> */
> if (rt61pci_alloc_rings(rt2x00dev))
> --- dscape.orig/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
> +++ dscape/drivers/net/wireless/mac80211/rt2x00/rt73usb.c
> @@ -1375,12 +1375,6 @@ static void rt73usb_uninitialize(struct
> return;
>
> /*
> - * Cancel scanning.
> - */
> - if (rt2x00dev->scan)
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_CANCELLED);
> -
> - /*
> * Flush out all pending work.
> */
> flush_workqueue(rt2x00dev->workqueue);
> @@ -1877,18 +1871,6 @@ static void rt73usb_interrupt_txdone(str
> rt2x00_ring_index_done_inc(entry->ring);
>
> /*
> - * Check if we are waiting on an empty queue
> - * to start scanning.
> - */
> - if (rt2x00dev->scan &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_VO]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_VI]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_BE]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_AC_BK]) &&
> - rt2x00_ring_empty(&rt2x00dev->ring[RING_PRIO]))
> - rt2x00_signal_scan(rt2x00dev->scan, SCANNING_READY);
> -
> - /*
> * If the data ring was full before the txdone handler
> * we must make sure the packet queue in the mac80211 stack
> * is reenabled when the txdone handler has finished.
> @@ -2053,7 +2035,6 @@ static const struct ieee80211_ops rt73us
> .config = rt2x00lib_config,
> .config_interface = rt2x00lib_config_interface,
> .set_multicast_list = rt2x00lib_set_multicast_list,
> - .passive_scan = rt2x00lib_passive_scan,
> .get_stats = rt73usb_get_stats,
> .set_retry_limit = rt73usb_set_retry_limit,
> .conf_tx = rt2x00lib_conf_tx,
> @@ -2720,11 +2701,6 @@ static int rt73usb_alloc_dev(struct usb_
> rt2x00dev->interface.type = -EINVAL;
>
> /*
> - * Intialize scanning attributes.
> - */
> - rt2x00dev->scan = NULL;
> -
> - /*
> * Allocate ring array.
> */
> if (rt73usb_alloc_rings(rt2x00dev))
>
>