This is just http://lkml.org/lkml/2007/7/1/51 but adapted to b44 ssb dr=
iver.
I couldn't test it as I don't have a b44 ethernet device.
diff -ruN linux-2.6.23.orig/drivers/net/b44.c linux-2.6.23/drivers/net/=
b44.c
--- linux-2.6.23.orig/drivers/net/b44.c 2007-10-24 19:02:33.000000000 +=
0200
+++ linux-2.6.23/drivers/net/b44.c 2007-10-24 19:50:46.000000000 +0200
@@ -113,6 +113,8 @@ static void b44_init_rings(struct b44 *);
#define B44_FULL_RESET 1
#define B44_FULL_RESET_SKIP_PHY 2
#define B44_PARTIAL_RESET 3
+#define B44_CHIP_RESET_FULL 4
+#define B44_CHIP_RESET_PARTIAL 5
static void b44_init_hw(struct b44 *, int);
@@ -1283,7 +1285,7 @@ static void b44_clear_stats(struct b44 *bp)
}
/* bp->lock is held. */
-static void b44_chip_reset(struct b44 *bp)
+static void b44_chip_reset(struct b44 *bp, int reset_kind)
{
if (ssb_is_core_up(bp)) {
bw32(bp, B44_RCV_LAZY, 0);
@@ -1307,6 +1309,13 @@ static void b44_chip_reset(struct b44 *bp)
ssb_device_enable(bp->sdev, 0);
b44_clear_stats(bp);
+ /*
+ * Don't enable PHY if we are doing a partial reset
+ * we are probably going to power down
+ */
+ if (reset_kind =3D=3D B44_CHIP_RESET_PARTIAL)
+ return;
+
switch (sdev->bus->bustype) {
case SSB_BUSTYPE_SSB:
bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
@@ -1332,7 +1341,14 @@ static void b44_chip_reset(struct b44 *bp)
static void b44_halt(struct b44 *bp)
{
b44_disable_ints(bp);
- b44_chip_reset(bp);
+ /* reset PHY */
+ b44_phy_reset(bp);
+ /* power down PHY */
+ printk(KERN_INFO PFX "%s: powering down PHY\n", bp->dev->name);
+ bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN);
+ /* now reset the chip, but without enabling the MAC&PHY
+ * part of it. This has to be done _after_ we shut down the PHY */
+ b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
}
/* bp->lock is held. */
@@ -1376,7 +1392,7 @@ static void b44_init_hw(struct b44 *bp, int reset=
_kind)
{
u32 val;
- b44_chip_reset(bp);
+ b44_chip_reset(bp, B44_CHIP_RESET_FULL);
if (reset_kind =3D=3D B44_FULL_RESET) {
b44_phy_reset(bp);
b44_setup_phy(bp);
@@ -1430,7 +1446,7 @@ static int b44_open(struct net_device *dev)
err =3D request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, =
dev);
if (unlikely(err < 0)) {
- b44_chip_reset(bp);
+ b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
b44_free_rings(bp);
b44_free_consistent(bp);
goto out;
@@ -2250,7 +2266,7 @@ static int __devinit b44_init_one(struct pci_dev =
*pdev,
/* Chip reset provides power to the b44 MAC & PCI cores, which
* is necessary for MAC register access.
*/
- b44_chip_reset(bp);
+ b44_chip_reset(bp, B44_CHIP_RESET_FULL);
printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name=
);
for (i =3D 0; i < 6; i++)
@@ -2284,4 +2300,5 @@ static void __devexit b44_remove_one(struct ssb_d=
ev=20
*sdev)
free_netdev(dev);
+ ssb_pci_set_power_state(sdev, PCI_D3hot);
ssb_set_drvdata(sdev, NULL);
}
@@ -2312,6 +2329,7 @@ static int b44_suspend(struct ssb_dev *sdev,=20
pm_message_t state)
b44_setup_wol(bp);
}
=20
+ ssb_pci_set_power_state(sdev, PCI_D3hot);
return 0;
}
--=20
Miguel Bot=F3n