This patch adds power management support in mac80211.
This allows us to enable power management through the "iwconfig <device=
> power=20
<off/on>" command.
The code is based on "mac80211-10.0.0" but it is a little bit modified.
Signed-off-by: Miguel Bot=C3=B3n <[email protected]>
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5fcc4c1..c82b6fa 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -452,6 +452,8 @@ struct ieee80211_conf {
u8 antenna_max;
u8 antenna_sel_tx;
u8 antenna_sel_rx;
+
+ u8 power_management_enable; /* flag to enable/disable power manag=
ement=20
*/
};
=20
/**
diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_io=
ctl.c
index 6caa3ec..f5eebec 100644
--- a/net/mac80211/ieee80211_ioctl.c
+++ b/net/mac80211/ieee80211_ioctl.c
@@ -674,6 +687,46 @@ static int ieee80211_ioctl_giwtxpower(struct net_d=
evice=20
*dev,
return 0;
}
=20
+static int ieee80211_ioctl_siwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct ieee80211_local *local =3D wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf =3D &local->hw.conf;
+
+ if (wrqu->power.disabled) {
+ conf->power_management_enable =3D 0;
+ return ieee80211_hw_config(local);
+ }
+
+ switch (wrqu->power.flags & IW_POWER_MODE) {
+ case IW_POWER_ON: /* If not specified */
+ case IW_POWER_MODE: /* If set all mask */
+ case IW_POWER_ALL_R: /* If explicitely state all */
+ break;
+ default: /* Otherwise we don't support it */
+ return -EINVAL;
+ }
+
+ conf->power_management_enable =3D 1;
+
+ return ieee80211_hw_config(local);
+}
+
+static int ieee80211_ioctl_giwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct ieee80211_local *local =3D wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf =3D &local->hw.conf;
+
+ wrqu->power.disabled =3D !conf->power_management_enable;
+
+ return 0;
+}
+
static int ieee80211_ioctl_siwrts(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rts, char *extra)
@@ -1111,8 +1166,8 @@ static const iw_handler ieee80211_handler[] =3D
(iw_handler) ieee80211_ioctl_giwretry, /* SIOCGIWRETRY */
(iw_handler) ieee80211_ioctl_siwencode, /* SIOCSIWENCODE */
(iw_handler) ieee80211_ioctl_giwencode, /* SIOCGIWENCODE */
- (iw_handler) NULL, /* SIOCSIWPOWER */
- (iw_handler) NULL, /* SIOCGIWPOWER */
+ (iw_handler) ieee80211_ioctl_siwpower, /* SIOCSIWPOWER */
+ (iw_handler) ieee80211_ioctl_giwpower, /* SIOCGIWPOWER */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) ieee80211_ioctl_siwgenie, /* SIOCSIWGENIE */
--=20
Miguel Bot=C3=B3n
Well, the previous patch wasn't correct. This one is valid.
--
This patch adds power management support in mac80211.
This allows us to enable power management through the "iwconfig <device=
> power <off/on>" command.
The code is based on "mac80211-10.0.0" but it is a little bit modified.
Signed-off-by: Miguel Bot=C3=B3n <[email protected]>
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5fcc4c1..c82b6fa 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -452,6 +452,8 @@ struct ieee80211_conf {
u8 antenna_max;
u8 antenna_sel_tx;
u8 antenna_sel_rx;
+
+ u8 power_management_enable; /* flag to enable/disable power manag=
ement */
};
=20
/**
diff --git a/net/mac80211/ieee80211_ioctl.c b/net/mac80211/ieee80211_io=
ctl.c
index 6caa3ec..f5eebec 100644
--- a/net/mac80211/ieee80211_ioctl.c
+++ b/net/mac80211/ieee80211_ioctl.c
@@ -674,6 +687,51 @@ static int ieee80211_ioctl_giwtxpower(struct net_d=
evice *dev,
return 0;
}
=20
+static int ieee80211_ioctl_siwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct ieee80211_local *local =3D wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf =3D &local->hw.conf;
+
+ if (wrqu->power.disabled) {
+ conf->power_management_enable =3D 0;
+ if (ieee80211_hw_config(local))
+ return -EINVAL;
+ return 0;
+ }
+
+ switch (wrqu->power.flags & IW_POWER_MODE) {
+ case IW_POWER_ON: /* If not specified */
+ case IW_POWER_MODE: /* If set all mask */
+ case IW_POWER_ALL_R: /* If explicitely state all */
+ break;
+ default: /* Otherwise we don't support it */
+ return -EINVAL;
+ }
+
+ conf->power_management_enable =3D 1;
+
+ if (ieee80211_hw_config(local))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ieee80211_ioctl_giwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct ieee80211_local *local =3D wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_conf *conf =3D &local->hw.conf;
+
+ wrqu->power.disabled =3D !conf->power_management_enable;
+
+ return 0;
+}
+
static int ieee80211_ioctl_siwrts(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rts, char *extra)
@@ -1111,8 +1166,8 @@ static const iw_handler ieee80211_handler[] =3D
(iw_handler) ieee80211_ioctl_giwretry, /* SIOCGIWRETRY */
(iw_handler) ieee80211_ioctl_siwencode, /* SIOCSIWENCODE */
(iw_handler) ieee80211_ioctl_giwencode, /* SIOCGIWENCODE */
- (iw_handler) NULL, /* SIOCSIWPOWER */
- (iw_handler) NULL, /* SIOCGIWPOWER */
+ (iw_handler) ieee80211_ioctl_siwpower, /* SIOCSIWPOWER */
+ (iw_handler) ieee80211_ioctl_giwpower, /* SIOCGIWPOWER */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) ieee80211_ioctl_siwgenie, /* SIOCSIWGENIE */
--=20
Miguel Bot=C3=B3n
On Sat, Nov 17, 2007 at 01:13:58AM +0100, Miguel Bot=F3n wrote:
> This patch adds power management support in mac80211.
>=20
> This allows us to enable power management through the "iwconfig <devi=
ce> power <off/on>" command.
> The code is based on "mac80211-10.0.0" but it is a little bit modifie=
d.
>=20
> Signed-off-by: Miguel Bot=F3n <[email protected]>
>=20
> diff --git a/include/net/mac80211.h b/include/net/mac80211.h
> index 5fcc4c1..c82b6fa 100644
> --- a/include/net/mac80211.h
> +++ b/include/net/mac80211.h
> @@ -452,6 +452,8 @@ struct ieee80211_conf {
> u8 antenna_max;
> u8 antenna_sel_tx;
> u8 antenna_sel_rx;
> +
> + u8 power_management_enable; /* flag to enable/disable power man=
agement */
> };
> =20
> /**
I'm not overly happy with this. What about folding this into the
flags variable?
John
--=20
John W. Linville
[email protected]