2009-05-12 00:03:50

by Christian Lamparter

[permalink] [raw]
Subject: [PATCH 1/6] ar9170: fix beacon plcp settings

This patch fixes a simple copy & paste error that affected beacon
transmission in 802.11a mode.

Signed-off-by: Christian Lamparter <[email protected]>
---
This series needs testing on more broken hardware and config settings!

So please wait before merging, thanks.

Regards,
Chr
---
diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index 43aeb69..72c7b5d 100644
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -398,10 +398,10 @@ int ar9170_update_beacon(struct ar9170 *ar)
/* XXX: use skb->cb info */
if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
- ((skb->len + 4) << (3+16)) + 0x0400);
+ ((skb->len + 4) << (3 + 16)) + 0x0400);
else
ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
- ((skb->len + 4) << (3+16)) + 0x0400);
+ ((skb->len + 4) << 16) + 0x001b);

ar9170_regwrite(AR9170_MAC_REG_BCN_LENGTH, skb->len + 4);
ar9170_regwrite(AR9170_MAC_REG_BCN_ADDR, AR9170_BEACON_BUFFER_ADDRESS);


2009-06-01 19:41:29

by Christian Lamparter

[permalink] [raw]
Subject: [RESEND][PATCH 1/4] ar9170: fix beacon plcp settings

This patch fixes a simple copy & paste error that affected beacon
transmission in 802.11a mode.

Signed-off-by: Christian Lamparter <[email protected]>
---
meh, no complains.
---
diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index 43aeb69..72c7b5d 100644
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -398,10 +398,10 @@ int ar9170_update_beacon(struct ar9170 *ar)
/* XXX: use skb->cb info */
if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ)
ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
- ((skb->len + 4) << (3+16)) + 0x0400);
+ ((skb->len + 4) << (3 + 16)) + 0x0400);
else
ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP,
- ((skb->len + 4) << (3+16)) + 0x0400);
+ ((skb->len + 4) << 16) + 0x001b);

ar9170_regwrite(AR9170_MAC_REG_BCN_LENGTH, skb->len + 4);
ar9170_regwrite(AR9170_MAC_REG_BCN_ADDR, AR9170_BEACON_BUFFER_ADDRESS);