When the chip is in sleep mode, there is no point trying to calibrate
the radio since it will just results in incorrect values being read
from registers and other potential issues. In addition, if we actually
start processing calibrate, do not allow the chip to be put into sleep
until we have completed the calibration step.
Signed-off-by: Jouni Malinen <[email protected]>
---
drivers/net/wireless/ath/ath9k/main.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- wireless-testing.orig/drivers/net/wireless/ath/ath9k/main.c 2009-05-19 16:32:29.000000000 +0300
+++ wireless-testing/drivers/net/wireless/ath/ath9k/main.c 2009-05-19 16:32:31.000000000 +0300
@@ -329,6 +329,12 @@ static void ath_ani_calibrate(unsigned l
if (sc->sc_flags & SC_OP_SCANNING)
goto set_timer;
+ /* Only calibrate if awake */
+ if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
+ goto set_timer;
+
+ ath9k_ps_wakeup(sc);
+
/* Long calibration runs independently of short calibration. */
if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
longcal = true;
@@ -380,6 +386,8 @@ static void ath_ani_calibrate(unsigned l
}
}
+ ath9k_ps_restore(sc);
+
set_timer:
/*
* Set timer interval based on previous results.
--
--
Jouni Malinen PGP id EFC895FA