Also implement get/set BB mult, get/set TX gain, set RX gain,
disable/restore CRS, run/stop DDFS, RX IQ est and QDIV roundup
in the process.
Signed-off-by: Gábor Stefanik <[email protected]>
---
Larry, please review the "SPEC FIXME" comments!
drivers/net/wireless/b43/phy_lp.c | 414 ++++++++++++++++++++++++++++++++++++-
1 files changed, 413 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 689c932..b283b58 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -605,6 +605,8 @@ static void lpphy_radio_init(struct b43_wldev *dev)
}
}
+struct lpphy_iq_est { u32 iq_prod, i_pwr, q_pwr; };
+
static void lpphy_set_rc_cap(struct b43_wldev *dev)
{
u8 rc_cap = dev->phy.lp->rc_cap;
@@ -614,9 +616,419 @@ static void lpphy_set_rc_cap(struct b43_wldev *dev)
b43_radio_write(dev, B2062_S_RXG_CNT16, ((rc_cap & 0x1F) >> 2) | 0x80);
}
+static u8 lpphy_get_bb_mult(struct b43_wldev *dev)
+{
+ return (b43_lptab_read(dev, B43_LPTAB16(0, 87)) & 0xFF00) >> 8;
+}
+
+static void lpphy_set_bb_mult(struct b43_wldev *dev, u8 bb_mult)
+{
+ b43_lptab_write(dev, B43_LPTAB16(0, 87), (u16)bb_mult << 8);
+}
+
+static void lpphy_disable_crs(struct b43_wldev *dev)
+{
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFF1F, 0x80);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x1);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFB);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x4);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFF7);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x8);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x10);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFDF);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x20);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFBF);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0x7);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0x38);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFF3F);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0x100);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFDFF);
+ b43_phy_write(dev, B43_LPPHY_PS_CTL_OVERRIDE_VAL0, 0);
+ b43_phy_write(dev, B43_LPPHY_PS_CTL_OVERRIDE_VAL1, 1);
+ b43_phy_write(dev, B43_LPPHY_PS_CTL_OVERRIDE_VAL2, 0x20);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFBFF);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xF7FF);
+ b43_phy_write(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL, 0);
+ b43_phy_write(dev, B43_LPPHY_RX_GAIN_CTL_OVERRIDE_VAL, 0x45AF);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, 0x3FF);
+}
+
+static void lpphy_restore_crs(struct b43_wldev *dev)
+{
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFF1F, 0x60);
+ else
+ b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFF1F, 0x20);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFF80);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFC00);
+}
+
+struct lpphy_tx_gains { u16 gm, pga, pad, dac; };
+
+static struct lpphy_tx_gains lpphy_get_tx_gains(struct b43_wldev *dev)
+{
+ struct lpphy_tx_gains gains;
+ u16 tmp;
+
+ gains.dac = (b43_phy_read(dev, B43_LPPHY_AFE_DAC_CTL) & 0x380) >> 7;
+ if (dev->phy.rev < 2) {
+ tmp = b43_phy_read(dev,
+ B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL) & 0x7FF;
+ gains.gm = tmp & 0x0007;
+ gains.pga = (tmp & 0x0078) >> 3;
+ gains.pad = (tmp & 0x780) >> 7;
+ } else {
+ tmp = b43_phy_read(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL);
+ gains.pad = b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0xFF;
+ gains.gm = tmp & 0xFF;
+ gains.pga = (tmp>>8) & 0xFF;
+ }
+
+ return gains;
+}
+
+static void lpphy_set_dac_gain(struct b43_wldev *dev, u16 dac)
+{
+ u16 ctl = b43_phy_read(dev, B43_LPPHY_AFE_DAC_CTL) & 0xC7F;
+ ctl |= dac << 7;
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DAC_CTL, 0xF000, ctl);
+}
+
+static void lpphy_set_tx_gains(struct b43_wldev *dev,
+ struct lpphy_tx_gains gains)
+{
+ u16 rf_gain, pa_gain;
+
+ if (dev->phy.rev < 2) {
+ rf_gain = (gains.pad << 7) | (gains.pga << 3) | gains.gm;
+ b43_phy_maskset(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
+ 0xF800, rf_gain);
+ } else {
+ pa_gain = b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0x7F00;
+ b43_phy_write(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
+ (gains.pga << 8) | gains.gm);
+ b43_phy_maskset(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
+ 0x8000, gains.pad | pa_gain);
+ b43_phy_write(dev, B43_PHY_OFDM(0xFC),
+ (gains.pga << 8) | gains.gm);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xFD),
+ 0x8000, gains.pad | pa_gain);
+ }
+ lpphy_set_dac_gain(dev, gains.dac);
+ if (dev->phy.rev < 2) {
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF, 1<<8);
+ } else {
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFF7F, 1<<7);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xBFFF, 1<<14);
+ }
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFFBF, 1<<4);
+}
+
+static void lpphy_rev0_1_set_rx_gain(struct b43_wldev *dev, u32 gain)
+{
+ u16 trsw = gain & 0x1;
+ u16 lna = (gain & 0xFFFC) | ((gain & 0xC) >> 2);
+ u16 ext_lna = (gain & 2) >> 1;
+
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFE, trsw);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFBFF, ext_lna<<10);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xF7FF, ext_lna<<11);
+ b43_phy_write(dev, B43_LPPHY_RX_GAIN_CTL_OVERRIDE_VAL, lna);
+}
+
+static void lpphy_rev2plus_set_rx_gain(struct b43_wldev *dev, u32 gain)
+{
+ u16 low_gain = gain & 0xFFFF;
+ u16 high_gain = (gain >> 16) & 0xF;
+ u16 ext_lna = (gain >> 21) & 0x1;
+ u16 trsw = ~(gain >> 21) & 0x1;
+ u16 tmp;
+ //SPEC FIXME is trsw really just ~(bool)ext_lna for rev2+?
+
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFE, trsw);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFDFF, ext_lna<<9);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFBFF, ext_lna<<10);
+ b43_phy_write(dev, B43_LPPHY_RX_GAIN_CTL_OVERRIDE_VAL, low_gain);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS, 0xFFF0, high_gain);
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ tmp = (gain >> 2) & 0x3;
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL,
+ 0xE7FF, tmp<<11);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0xE6), 0xFFE7, tmp<<3);
+ }
+}
+
+static void lpphy_enable_rx_gain_override(struct b43_wldev *dev)
+{
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFE);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFEF);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFBF);
+ if (dev->phy.rev >= 2) {
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF);
+ if (b43_current_band(dev->wl) != IEEE80211_BAND_2GHZ)
+ return;
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFBFF);
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFFF7);
+ } else {
+ b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFDFF);
+ }
+}
+
+static void lpphy_disable_rx_gain_override(struct b43_wldev *dev)
+{
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40);
+ if (dev->phy.rev >= 2) {
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100);
+ if (b43_current_band(dev->wl) != IEEE80211_BAND_2GHZ)
+ return;
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x400);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x8);
+ } else {
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x200);
+ }
+}
+
+static void lpphy_set_rx_gain(struct b43_wldev *dev, u32 gain)
+{
+ if (dev->phy.rev < 2)
+ lpphy_rev0_1_set_rx_gain(dev, gain);
+ else
+ lpphy_rev2plus_set_rx_gain(dev, gain);
+ lpphy_enable_rx_gain_override(dev);
+}
+
+static void lpphy_set_rx_gain_by_index(struct b43_wldev *dev, u16 idx)
+{
+ u32 gain = b43_lptab_read(dev, B43_LPTAB16(12, idx));
+ lpphy_set_rx_gain(dev, gain);
+}
+
+static void lpphy_stop_ddfs(struct b43_wldev *dev)
+{
+ b43_phy_mask(dev, B43_LPPHY_AFE_DDFS, 0xFFFD);
+ b43_phy_mask(dev, B43_LPPHY_LP_PHY_CTL, 0xFFDF);
+}
+
+static void lpphy_run_ddfs(struct b43_wldev *dev, int i_on, int q_on,
+ int incr1, int incr2, int scale_idx)
+{
+ lpphy_stop_ddfs(dev);
+ b43_phy_mask(dev, B43_LPPHY_AFE_DDFS_POINTER_INIT, 0xFF80);
+ b43_phy_mask(dev, B43_LPPHY_AFE_DDFS_POINTER_INIT, 0x80FF);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS_INCR_INIT, 0xFF80, incr1);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS_INCR_INIT, 0x80FF, incr2 << 3);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS, 0xFFF7, i_on << 3);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS, 0xFFEF, q_on << 4);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS, 0xFF9F, scale_idx << 5);
+ b43_phy_mask(dev, B43_LPPHY_AFE_DDFS, 0xFFFB);
+ b43_phy_set(dev, B43_LPPHY_AFE_DDFS, 0x2);
+ b43_phy_set(dev, B43_LPPHY_AFE_DDFS, 0x20);
+}
+
+static bool lpphy_rx_iq_est(struct b43_wldev *dev, u16 samples, u8 time,
+ struct lpphy_iq_est *iq_est)
+{
+ int i;
+
+ b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFF7);
+ b43_phy_write(dev, B43_LPPHY_IQ_NUM_SMPLS_ADDR, samples);
+ b43_phy_maskset(dev, B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR, 0xFF00, time);
+ b43_phy_mask(dev, B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR, 0xFEFF);
+ b43_phy_set(dev, B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR, 0xFDFF);
+
+ for (i = 0; i < 500; i++) {
+ if (!(b43_phy_read(dev,
+ B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR) & 0x200))
+ break;
+ msleep(1);
+ }
+
+ if ((b43_phy_read(dev, B43_LPPHY_IQ_ENABLE_WAIT_TIME_ADDR) & 0x200)) {
+ b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x8);
+ return false;
+ }
+
+ iq_est->iq_prod = b43_phy_read(dev, B43_LPPHY_IQ_ACC_HI_ADDR);
+ iq_est->iq_prod <<= 16;
+ iq_est->iq_prod |= b43_phy_read(dev, B43_LPPHY_IQ_ACC_LO_ADDR);
+
+ iq_est->i_pwr = b43_phy_read(dev, B43_LPPHY_IQ_I_PWR_ACC_HI_ADDR);
+ iq_est->i_pwr <<= 16;
+ iq_est->i_pwr |= b43_phy_read(dev, B43_LPPHY_IQ_I_PWR_ACC_LO_ADDR);
+
+ iq_est->q_pwr = b43_phy_read(dev, B43_LPPHY_IQ_Q_PWR_ACC_HI_ADDR);
+ iq_est->q_pwr <<= 16;
+ iq_est->q_pwr |= b43_phy_read(dev, B43_LPPHY_IQ_Q_PWR_ACC_LO_ADDR);
+
+ b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x8);
+ return true;
+}
+
+static int lpphy_loopback(struct b43_wldev *dev)
+{
+ struct lpphy_iq_est iq_est;
+ int i, index = -1;
+ u32 tmp;
+
+ memset(&iq_est, 0, sizeof(iq_est));
+
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x3);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+ b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFFE);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x800);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x800);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x8);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x8);
+ b43_radio_write(dev, B2062_N_TX_CTL_A, 0x80);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x80);
+ b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x80);
+ for (i = 0; i < 32; i++) {
+ lpphy_set_rx_gain_by_index(dev, i);
+ lpphy_run_ddfs(dev, 1, 1, 5, 5, 0);
+ if (!(lpphy_rx_iq_est(dev, 1000, 32, &iq_est)))
+ continue;
+ tmp = (iq_est.i_pwr + iq_est.q_pwr) / 1000;
+ if ((tmp > 4000) && (tmp < 10000)) {
+ index = i;
+ break;
+ }
+ }
+ lpphy_stop_ddfs(dev);
+ return index;
+}
+
+u32 lpphy_qdiv_roundup(u32 dividend, u32 divisor, u8 precision)
+{
+ u32 quotient, remainder, rbit, roundup, tmp;
+
+ if (divisor == 0) {
+ quotient = 0;
+ remainder = 0;
+ } else {
+ quotient = dividend / divisor;
+ remainder = dividend % divisor;
+ }
+
+ rbit = divisor & 0x1;
+ roundup = (divisor >> 1) + rbit;
+ precision--;
+
+ while (precision != 0xFF) {
+ tmp = remainder - roundup;
+ quotient <<= 1;
+ remainder <<= 1;
+ if (remainder >= roundup) {
+ remainder = (tmp << 1) + rbit;
+ quotient--;
+ }
+ precision--;
+ }
+
+ if (remainder >= roundup)
+ quotient++;
+
+ return quotient;
+}
+
+static void lpphy_set_tx_power_control(struct b43_wldev *dev,
+ enum b43_lpphy_txpctl_mode mode);
+
static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev)
{
- //TODO and SPEC FIXME
+ u32 ideal_pwr_table[22] = {
+ 0x10000, 0x10557, 0x10e2d, 0x113e0, 0x10f22, 0x0ff64,
+ 0x0eda2, 0x0e5d4, 0x0efd1, 0x0fbe8, 0x0b7b8, 0x04b35,
+ 0x01a5e, 0x00a0b, 0x00444, 0x001fd, 0x000ff, 0x00088,
+ 0x0004c, 0x0002c, 0x0001a, 0xc0006,
+ };
+ bool old_txg_ovr;
+ u16 old_rf_ovr, old_rf_ovrval, old_afe_ovr, old_afe_ovrval,
+ old_rf2_ovr, old_rf2_ovrval, old_phy_ctl, old_txpctl;
+ u8 old_bbmult;
+ struct lpphy_iq_est iq_est;
+ struct lpphy_tx_gains tx_gains;
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ int loopback, i, j, inner_sum;
+ u32 normal_pwr, ideal_pwr, mean_sq_pwr, tmp = 0, mean_sq_pwr_min = 0;
+
+ memset(&iq_est, 0, sizeof(iq_est));
+
+ b43_switch_channel(dev, 7);
+ old_txg_ovr = (b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) >> 6) & 1;
+ old_bbmult = lpphy_get_bb_mult(dev);
+ if (old_txg_ovr)
+ tx_gains = lpphy_get_tx_gains(dev);
+ old_rf_ovr = b43_phy_read(dev, B43_LPPHY_RF_OVERRIDE_0);
+ old_rf_ovrval = b43_phy_read(dev, B43_LPPHY_RF_OVERRIDE_VAL_0);
+ old_afe_ovr = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR);
+ old_afe_ovrval = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVRVAL);
+ old_rf2_ovr = b43_phy_read(dev, B43_LPPHY_RF_OVERRIDE_2);
+ old_rf2_ovrval = b43_phy_read(dev, B43_LPPHY_RF_OVERRIDE_2_VAL);
+ old_phy_ctl = b43_phy_read(dev, B43_LPPHY_LP_PHY_CTL);
+ old_txpctl = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_CMD) &
+ B43_LPPHY_TX_PWR_CTL_CMD_MODE;
+
+ lpphy_set_tx_power_control(dev, B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF);
+ lpphy_disable_crs(dev);
+ loopback = lpphy_loopback(dev);
+ if (loopback == -1)
+ goto finish;
+ lpphy_set_rx_gain_by_index(dev, loopback);
+ b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFFBF, 0x40);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFFF8, 0x1);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFFC7, 0x8);
+ b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFF3F, 0xC0);
+ for (i = 128; i <= 159; i++) {
+ b43_radio_write(dev, B2062_N_RXBB_CALIB2, i);
+ inner_sum = 0;
+ for (j = 5; j <= 25; j++) {
+ lpphy_run_ddfs(dev, 1, 1, j, j, 0);
+ if (!(lpphy_rx_iq_est(dev, 1000, 32, &iq_est)))
+ goto finish;
+ mean_sq_pwr = iq_est.i_pwr + iq_est.q_pwr;
+ if (j == 5)
+ tmp = mean_sq_pwr;
+ ideal_pwr = ((ideal_pwr_table[j-5] >> 3) + 1) >> 1;
+ normal_pwr = lpphy_qdiv_roundup(mean_sq_pwr, tmp, 12);
+ mean_sq_pwr = ideal_pwr - normal_pwr;
+ mean_sq_pwr *= mean_sq_pwr;
+ inner_sum += mean_sq_pwr;
+ if ((i = 128) || (inner_sum < mean_sq_pwr_min)) {
+ lpphy->rc_cap = i;
+ mean_sq_pwr_min = inner_sum;
+ }
+ }
+ }
+ lpphy_stop_ddfs(dev);
+
+finish:
+ lpphy_restore_crs(dev);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, old_rf_ovrval);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_0, old_rf_ovr);
+ b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVRVAL, old_afe_ovrval);
+ b43_phy_write(dev, B43_LPPHY_AFE_CTL_OVR, old_afe_ovr);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, old_rf2_ovrval);
+ b43_phy_write(dev, B43_LPPHY_RF_OVERRIDE_2, old_rf2_ovr);
+ b43_phy_write(dev, B43_LPPHY_LP_PHY_CTL, old_phy_ctl);
+
+ lpphy_set_bb_mult(dev, old_bbmult);
+ if (old_txg_ovr)
+ /*
+ * SPEC FIXME: The specs say "get_tx_gains" here, which is
+ * illogical. According to lwfinger, vendor driver v4.150.10.5
+ * has a Set here, while v4.174.64.19 has a Get - regression in
+ * the vendor driver? This should be tested this once the code
+ * is testable.
+ */
+ lpphy_set_tx_gains(dev, tx_gains);
+ lpphy_set_tx_power_control(dev, old_txpctl);
+ if (lpphy->rc_cap)
+ lpphy_set_rc_cap(dev);
}
static void lpphy_rev2plus_rc_calib(struct b43_wldev *dev)
--
1.6.2.4
On Wednesday 12 August 2009 19:56:25 Gábor Stefanik wrote:
> + b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF, 1<<8);
> + b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS_INCR_INIT, 0x80FF, incr2 << 3);
Can you try to stick to one style? a << b is our coding style.
> +static void lpphy_run_ddfs(struct b43_wldev *dev, int i_on, int q_on,
> + int incr1, int incr2, int scale_idx)
> +{
> + lpphy_stop_ddfs(dev);
> + b43_phy_mask(dev, B43_LPPHY_AFE_DDFS_POINTER_INIT, 0xFF80);
> + b43_phy_mask(dev, B43_LPPHY_AFE_DDFS_POINTER_INIT, 0x80FF);
> + b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS_INCR_INIT, 0xFF80, incr1);
> + b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS_INCR_INIT, 0x80FF, incr2 << 3);
3bit shift smells fishy. Did you want 8?
> +u32 lpphy_qdiv_roundup(u32 dividend, u32 divisor, u8 precision)
static?
> +static void lpphy_set_tx_power_control(struct b43_wldev *dev,
> + enum b43_lpphy_txpctl_mode mode);
Can you reorder the code to avoid the forward declaration?
> + for (i = 128; i <= 159; i++) {
> + b43_radio_write(dev, B2062_N_RXBB_CALIB2, i);
> + inner_sum = 0;
> + for (j = 5; j <= 25; j++) {
> + lpphy_run_ddfs(dev, 1, 1, j, j, 0);
(Just by guess) Did you really want j,j instead of i,j or something like that?
> + if (!(lpphy_rx_iq_est(dev, 1000, 32, &iq_est)))
> + goto finish;
> + mean_sq_pwr = iq_est.i_pwr + iq_est.q_pwr;
> + if (j == 5)
> + tmp = mean_sq_pwr;
> + ideal_pwr = ((ideal_pwr_table[j-5] >> 3) + 1) >> 1;
> + normal_pwr = lpphy_qdiv_roundup(mean_sq_pwr, tmp, 12);
> + mean_sq_pwr = ideal_pwr - normal_pwr;
> + mean_sq_pwr *= mean_sq_pwr;
> + inner_sum += mean_sq_pwr;
> + if ((i = 128) || (inner_sum < mean_sq_pwr_min)) {
> + lpphy->rc_cap = i;
> + mean_sq_pwr_min = inner_sum;
> + }
> + }
> + }
> + lpphy_stop_ddfs(dev);
> +
> + if (old_txg_ovr)
> + /*
> + * SPEC FIXME: The specs say "get_tx_gains" here, which is
> + * illogical. According to lwfinger, vendor driver v4.150.10.5
> + * has a Set here, while v4.174.64.19 has a Get - regression in
> + * the vendor driver? This should be tested this once the code
> + * is testable.
> + */
> + lpphy_set_tx_gains(dev, tx_gains);
Use curly brackets for multiline indents.
> + lpphy_set_tx_power_control(dev, old_txpctl);
> + if (lpphy->rc_cap)
> + lpphy_set_rc_cap(dev);
> }
>
> static void lpphy_rev2plus_rc_calib(struct b43_wldev *dev)
--
Greetings, Michael.
Michael Buesch wrote:
> On Wednesday 12 August 2009 19:56:25 Gábor Stefanik wrote:
>> + b43_phy_mask(dev, B43_LPPHY_AFE_DDFS_POINTER_INIT, 0x80FF);
>> + b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS_INCR_INIT, 0xFF80, incr1);
>> + b43_phy_maskset(dev, B43_LPPHY_AFE_DDFS_INCR_INIT, 0x80FF, incr2 << 3);
>
> 3bit shift smells fishy. Did you want 8?
There was a typo in the specs. It now is changed to 8.
>> + for (j = 5; j <= 25; j++) {
>> + lpphy_run_ddfs(dev, 1, 1, j, j, 0);
>
> (Just by guess) Did you really want j,j instead of i,j or something like that?
No, it definitely is j,j.
Larry