Another cfg80211-preparation patch: removes some code/definitions from
main.c and dev.h and put's it into assoc.c/.h, scan.c/.h.
No function change.
Signed-off-by: Holger Schurig <[email protected]>
--- linux-wl.orig/drivers/net/wireless/libertas/dev.h
+++ linux-wl/drivers/net/wireless/libertas/dev.h
@@ -6,75 +6,10 @@
#ifndef _LBS_DEV_H_
#define _LBS_DEV_H_
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/ethtool.h>
-#include <linux/debugfs.h>
+#include "scan.h"
+#include "assoc.h"
-#include "defs.h"
-#include "host.h"
-extern const struct ethtool_ops lbs_ethtool_ops;
-
-#define MAX_BSSID_PER_CHANNEL 16
-
-#define NR_TX_QUEUE 3
-
-/* For the extended Scan */
-#define MAX_EXTENDED_SCAN_BSSID_LIST MAX_BSSID_PER_CHANNEL * \
- MRVDRV_MAX_CHANNEL_SIZE + 1
-
-#define MAX_REGION_CHANNEL_NUM 2
-
-/** Chan-freq-TxPower mapping table*/
-struct chan_freq_power {
- /** channel Number */
- u16 channel;
- /** frequency of this channel */
- u32 freq;
- /** Max allowed Tx power level */
- u16 maxtxpower;
- /** TRUE:channel unsupported; FLASE:supported*/
- u8 unsupported;
-};
-
-/** region-band mapping table*/
-struct region_channel {
- /** TRUE if this entry is valid */
- u8 valid;
- /** region code for US, Japan ... */
- u8 region;
- /** band B/G/A, used for BAND_CONFIG cmd */
- u8 band;
- /** Actual No. of elements in the array below */
- u8 nrcfp;
- /** chan-freq-txpower mapping table*/
- struct chan_freq_power *CFP;
-};
-
-struct lbs_802_11_security {
- u8 WPAenabled;
- u8 WPA2enabled;
- u8 wep_enabled;
- u8 auth_mode;
- u32 key_mgmt;
-};
-
-/** Current Basic Service Set State Structure */
-struct current_bss_params {
- /** bssid */
- u8 bssid[ETH_ALEN];
- /** ssid */
- u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
- u8 ssid_len;
-
- /** band */
- u8 band;
- /** channel */
- u8 channel;
- /** zero-terminated array of supported data rates */
- u8 rates[MAX_RATES + 1];
-};
/** sleep_params */
struct sleep_params {
@@ -295,12 +230,6 @@
struct enc_key wpa_mcast_key;
struct enc_key wpa_unicast_key;
-/*
- * In theory, the IE is limited to the IE length, 255,
- * but in practice 64 bytes are enough.
- */
-#define MAX_WPA_IE_LEN 64
-
/** WPA Information Elements*/
u8 wpa_ie[MAX_WPA_IE_LEN];
u8 wpa_ie_len;
@@ -334,84 +263,4 @@
extern struct cmd_confirm_sleep confirm_sleep;
-/**
- * @brief Structure used to store information for each beacon/probe response
- */
-struct bss_descriptor {
- u8 bssid[ETH_ALEN];
-
- u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
- u8 ssid_len;
-
- u16 capability;
- u32 rssi;
- u32 channel;
- u16 beaconperiod;
- __le16 atimwindow;
-
- /* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */
- u8 mode;
-
- /* zero-terminated array of supported data rates */
- u8 rates[MAX_RATES + 1];
-
- unsigned long last_scanned;
-
- union ieee_phy_param_set phy;
- union ieee_ss_param_set ss;
-
- u8 wpa_ie[MAX_WPA_IE_LEN];
- size_t wpa_ie_len;
- u8 rsn_ie[MAX_WPA_IE_LEN];
- size_t rsn_ie_len;
-
- u8 mesh;
-
- struct list_head list;
-};
-
-/** Association request
- *
- * Encapsulates all the options that describe a specific assocation request
- * or configuration of the wireless card's radio, mode, and security settings.
- */
-struct assoc_request {
-#define ASSOC_FLAG_SSID 1
-#define ASSOC_FLAG_CHANNEL 2
-#define ASSOC_FLAG_BAND 3
-#define ASSOC_FLAG_MODE 4
-#define ASSOC_FLAG_BSSID 5
-#define ASSOC_FLAG_WEP_KEYS 6
-#define ASSOC_FLAG_WEP_TX_KEYIDX 7
-#define ASSOC_FLAG_WPA_MCAST_KEY 8
-#define ASSOC_FLAG_WPA_UCAST_KEY 9
-#define ASSOC_FLAG_SECINFO 10
-#define ASSOC_FLAG_WPA_IE 11
- unsigned long flags;
-
- u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
- u8 ssid_len;
- u8 channel;
- u8 band;
- u8 mode;
- u8 bssid[ETH_ALEN] __attribute__ ((aligned (2)));
-
- /** WEP keys */
- struct enc_key wep_keys[4];
- u16 wep_tx_keyidx;
-
- /** WPA keys */
- struct enc_key wpa_mcast_key;
- struct enc_key wpa_unicast_key;
-
- struct lbs_802_11_security secinfo;
-
- /** WPA Information Elements*/
- u8 wpa_ie[MAX_WPA_IE_LEN];
- u8 wpa_ie_len;
-
- /* BSS to associate with for infrastructure of Ad-Hoc join */
- struct bss_descriptor bss;
-};
-
#endif
--- linux-wl.orig/drivers/net/wireless/libertas/assoc.c
+++ linux-wl/drivers/net/wireless/libertas/assoc.c
@@ -23,6 +23,13 @@
*/
#define CAPINFO_MASK (~(0xda00))
+/**
+ * 802.11b/g supported bitrates (in 500Kb/s units)
+ */
+u8 lbs_bg_rates[MAX_RATES] =
+ { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c,
+0x00, 0x00 };
+
/**
* @brief This function finds common rates between rates and card rates.
--- linux-wl.orig/drivers/net/wireless/libertas/assoc.h
+++ linux-wl/drivers/net/wireless/libertas/assoc.h
@@ -3,7 +3,127 @@
#ifndef _LBS_ASSOC_H_
#define _LBS_ASSOC_H_
-#include "dev.h"
+
+#include "defs.h"
+#include "host.h"
+
+
+struct lbs_private;
+
+/*
+ * In theory, the IE is limited to the IE length, 255,
+ * but in practice 64 bytes are enough.
+ */
+#define MAX_WPA_IE_LEN 64
+
+
+
+struct lbs_802_11_security {
+ u8 WPAenabled;
+ u8 WPA2enabled;
+ u8 wep_enabled;
+ u8 auth_mode;
+ u32 key_mgmt;
+};
+
+/** Current Basic Service Set State Structure */
+struct current_bss_params {
+ /** bssid */
+ u8 bssid[ETH_ALEN];
+ /** ssid */
+ u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+ u8 ssid_len;
+
+ /** band */
+ u8 band;
+ /** channel */
+ u8 channel;
+ /** zero-terminated array of supported data rates */
+ u8 rates[MAX_RATES + 1];
+};
+
+/**
+ * @brief Structure used to store information for each beacon/probe response
+ */
+struct bss_descriptor {
+ u8 bssid[ETH_ALEN];
+
+ u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+ u8 ssid_len;
+
+ u16 capability;
+ u32 rssi;
+ u32 channel;
+ u16 beaconperiod;
+ __le16 atimwindow;
+
+ /* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */
+ u8 mode;
+
+ /* zero-terminated array of supported data rates */
+ u8 rates[MAX_RATES + 1];
+
+ unsigned long last_scanned;
+
+ union ieee_phy_param_set phy;
+ union ieee_ss_param_set ss;
+
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ size_t wpa_ie_len;
+ u8 rsn_ie[MAX_WPA_IE_LEN];
+ size_t rsn_ie_len;
+
+ u8 mesh;
+
+ struct list_head list;
+};
+
+/** Association request
+ *
+ * Encapsulates all the options that describe a specific assocation request
+ * or configuration of the wireless card's radio, mode, and security settings.
+ */
+struct assoc_request {
+#define ASSOC_FLAG_SSID 1
+#define ASSOC_FLAG_CHANNEL 2
+#define ASSOC_FLAG_BAND 3
+#define ASSOC_FLAG_MODE 4
+#define ASSOC_FLAG_BSSID 5
+#define ASSOC_FLAG_WEP_KEYS 6
+#define ASSOC_FLAG_WEP_TX_KEYIDX 7
+#define ASSOC_FLAG_WPA_MCAST_KEY 8
+#define ASSOC_FLAG_WPA_UCAST_KEY 9
+#define ASSOC_FLAG_SECINFO 10
+#define ASSOC_FLAG_WPA_IE 11
+ unsigned long flags;
+
+ u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+ u8 ssid_len;
+ u8 channel;
+ u8 band;
+ u8 mode;
+ u8 bssid[ETH_ALEN] __attribute__ ((aligned (2)));
+
+ /** WEP keys */
+ struct enc_key wep_keys[4];
+ u16 wep_tx_keyidx;
+
+ /** WPA keys */
+ struct enc_key wpa_mcast_key;
+ struct enc_key wpa_unicast_key;
+
+ struct lbs_802_11_security secinfo;
+
+ /** WPA Information Elements*/
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ u8 wpa_ie_len;
+
+ /* BSS to associate with for infrastructure of Ad-Hoc join */
+ struct bss_descriptor bss;
+};
+
+
+extern u8 lbs_bg_rates[MAX_RATES];
void lbs_association_worker(struct work_struct *work);
struct assoc_request *lbs_get_association_request(struct lbs_private *priv);
--- linux-wl.orig/drivers/net/wireless/libertas/cmd.c
+++ linux-wl/drivers/net/wireless/libertas/cmd.c
@@ -13,6 +13,7 @@
#include "dev.h"
#include "assoc.h"
#include "wext.h"
+#include "scan.h"
#include "cmd.h"
static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv);
--- linux-wl.orig/drivers/net/wireless/libertas/decl.h
+++ linux-wl/drivers/net/wireless/libertas/decl.h
@@ -10,6 +10,9 @@
#include "defs.h"
+
+extern const struct ethtool_ops lbs_ethtool_ops;
+
/** Function Prototype Declaration */
struct lbs_private;
struct sk_buff;
@@ -33,7 +36,6 @@
/** The proc fs interface */
netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev);
-int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band);
int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *);
@@ -49,8 +51,6 @@
void lbs_persist_config_remove(struct net_device *net);
/* main.c */
-struct chan_freq_power *lbs_get_region_cfp_table(u8 region,
- int *cfp_no);
struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
void lbs_remove_card(struct lbs_private *priv);
int lbs_start_card(struct lbs_private *priv);
--- linux-wl.orig/drivers/net/wireless/libertas/defs.h
+++ linux-wl/drivers/net/wireless/libertas/defs.h
@@ -322,7 +322,6 @@
extern const char lbs_driver_version[];
extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
-extern u8 lbs_bg_rates[MAX_RATES];
/** ENUM definition*/
/** SNRNF_TYPE */
--- linux-wl.orig/drivers/net/wireless/libertas/main.c
+++ linux-wl/drivers/net/wireless/libertas/main.c
@@ -45,119 +45,6 @@
struct cmd_confirm_sleep confirm_sleep;
-#define LBS_TX_PWR_DEFAULT 20 /*100mW */
-#define LBS_TX_PWR_US_DEFAULT 20 /*100mW */
-#define LBS_TX_PWR_JP_DEFAULT 16 /*50mW */
-#define LBS_TX_PWR_FR_DEFAULT 20 /*100mW */
-#define LBS_TX_PWR_EMEA_DEFAULT 20 /*100mW */
-
-/* Format { channel, frequency (MHz), maxtxpower } */
-/* band: 'B/G', region: USA FCC/Canada IC */
-static struct chan_freq_power channel_freq_power_US_BG[] = {
- {1, 2412, LBS_TX_PWR_US_DEFAULT},
- {2, 2417, LBS_TX_PWR_US_DEFAULT},
- {3, 2422, LBS_TX_PWR_US_DEFAULT},
- {4, 2427, LBS_TX_PWR_US_DEFAULT},
- {5, 2432, LBS_TX_PWR_US_DEFAULT},
- {6, 2437, LBS_TX_PWR_US_DEFAULT},
- {7, 2442, LBS_TX_PWR_US_DEFAULT},
- {8, 2447, LBS_TX_PWR_US_DEFAULT},
- {9, 2452, LBS_TX_PWR_US_DEFAULT},
- {10, 2457, LBS_TX_PWR_US_DEFAULT},
- {11, 2462, LBS_TX_PWR_US_DEFAULT}
-};
-
-/* band: 'B/G', region: Europe ETSI */
-static struct chan_freq_power channel_freq_power_EU_BG[] = {
- {1, 2412, LBS_TX_PWR_EMEA_DEFAULT},
- {2, 2417, LBS_TX_PWR_EMEA_DEFAULT},
- {3, 2422, LBS_TX_PWR_EMEA_DEFAULT},
- {4, 2427, LBS_TX_PWR_EMEA_DEFAULT},
- {5, 2432, LBS_TX_PWR_EMEA_DEFAULT},
- {6, 2437, LBS_TX_PWR_EMEA_DEFAULT},
- {7, 2442, LBS_TX_PWR_EMEA_DEFAULT},
- {8, 2447, LBS_TX_PWR_EMEA_DEFAULT},
- {9, 2452, LBS_TX_PWR_EMEA_DEFAULT},
- {10, 2457, LBS_TX_PWR_EMEA_DEFAULT},
- {11, 2462, LBS_TX_PWR_EMEA_DEFAULT},
- {12, 2467, LBS_TX_PWR_EMEA_DEFAULT},
- {13, 2472, LBS_TX_PWR_EMEA_DEFAULT}
-};
-
-/* band: 'B/G', region: Spain */
-static struct chan_freq_power channel_freq_power_SPN_BG[] = {
- {10, 2457, LBS_TX_PWR_DEFAULT},
- {11, 2462, LBS_TX_PWR_DEFAULT}
-};
-
-/* band: 'B/G', region: France */
-static struct chan_freq_power channel_freq_power_FR_BG[] = {
- {10, 2457, LBS_TX_PWR_FR_DEFAULT},
- {11, 2462, LBS_TX_PWR_FR_DEFAULT},
- {12, 2467, LBS_TX_PWR_FR_DEFAULT},
- {13, 2472, LBS_TX_PWR_FR_DEFAULT}
-};
-
-/* band: 'B/G', region: Japan */
-static struct chan_freq_power channel_freq_power_JPN_BG[] = {
- {1, 2412, LBS_TX_PWR_JP_DEFAULT},
- {2, 2417, LBS_TX_PWR_JP_DEFAULT},
- {3, 2422, LBS_TX_PWR_JP_DEFAULT},
- {4, 2427, LBS_TX_PWR_JP_DEFAULT},
- {5, 2432, LBS_TX_PWR_JP_DEFAULT},
- {6, 2437, LBS_TX_PWR_JP_DEFAULT},
- {7, 2442, LBS_TX_PWR_JP_DEFAULT},
- {8, 2447, LBS_TX_PWR_JP_DEFAULT},
- {9, 2452, LBS_TX_PWR_JP_DEFAULT},
- {10, 2457, LBS_TX_PWR_JP_DEFAULT},
- {11, 2462, LBS_TX_PWR_JP_DEFAULT},
- {12, 2467, LBS_TX_PWR_JP_DEFAULT},
- {13, 2472, LBS_TX_PWR_JP_DEFAULT},
- {14, 2484, LBS_TX_PWR_JP_DEFAULT}
-};
-
-/**
- * the structure for channel, frequency and power
- */
-struct region_cfp_table {
- u8 region;
- struct chan_freq_power *cfp_BG;
- int cfp_no_BG;
-};
-
-/**
- * the structure for the mapping between region and CFP
- */
-static struct region_cfp_table region_cfp_table[] = {
- {0x10, /*US FCC */
- channel_freq_power_US_BG,
- ARRAY_SIZE(channel_freq_power_US_BG),
- }
- ,
- {0x20, /*CANADA IC */
- channel_freq_power_US_BG,
- ARRAY_SIZE(channel_freq_power_US_BG),
- }
- ,
- {0x30, /*EU*/ channel_freq_power_EU_BG,
- ARRAY_SIZE(channel_freq_power_EU_BG),
- }
- ,
- {0x31, /*SPAIN*/ channel_freq_power_SPN_BG,
- ARRAY_SIZE(channel_freq_power_SPN_BG),
- }
- ,
- {0x32, /*FRANCE*/ channel_freq_power_FR_BG,
- ARRAY_SIZE(channel_freq_power_FR_BG),
- }
- ,
- {0x40, /*JAPAN*/ channel_freq_power_JPN_BG,
- ARRAY_SIZE(channel_freq_power_JPN_BG),
- }
- ,
-/*Add new region here */
-};
-
/**
* the table to keep region code
*/
@@ -165,13 +52,6 @@
{ 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 };
/**
- * 802.11b/g supported bitrates (in 500Kb/s units)
- */
-u8 lbs_bg_rates[MAX_RATES] =
- { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c,
-0x00, 0x00 };
-
-/**
* FW rate table. FW refers to rates by their index in this table, not by the
* rate value itself. Values of 0x00 are
* reserved positions.
@@ -1617,68 +1497,6 @@
lbs_deb_leave(LBS_DEB_MESH);
}
-/**
- * @brief This function finds the CFP in
- * region_cfp_table based on region and band parameter.
- *
- * @param region The region code
- * @param band The band
- * @param cfp_no A pointer to CFP number
- * @return A pointer to CFP
- */
-struct chan_freq_power *lbs_get_region_cfp_table(u8 region, int *cfp_no)
-{
- int i, end;
-
- lbs_deb_enter(LBS_DEB_MAIN);
-
- end = ARRAY_SIZE(region_cfp_table);
-
- for (i = 0; i < end ; i++) {
- lbs_deb_main("region_cfp_table[i].region=%d\n",
- region_cfp_table[i].region);
- if (region_cfp_table[i].region == region) {
- *cfp_no = region_cfp_table[i].cfp_no_BG;
- lbs_deb_leave(LBS_DEB_MAIN);
- return region_cfp_table[i].cfp_BG;
- }
- }
-
- lbs_deb_leave_args(LBS_DEB_MAIN, "ret NULL");
- return NULL;
-}
-
-int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band)
-{
- int ret = 0;
- int i = 0;
-
- struct chan_freq_power *cfp;
- int cfp_no;
-
- lbs_deb_enter(LBS_DEB_MAIN);
-
- memset(priv->region_channel, 0, sizeof(priv->region_channel));
-
- cfp = lbs_get_region_cfp_table(region, &cfp_no);
- if (cfp != NULL) {
- priv->region_channel[i].nrcfp = cfp_no;
- priv->region_channel[i].CFP = cfp;
- } else {
- lbs_deb_main("wrong region code %#x in band B/G\n",
- region);
- ret = -1;
- goto out;
- }
- priv->region_channel[i].valid = 1;
- priv->region_channel[i].region = region;
- priv->region_channel[i].band = band;
- i++;
-out:
- lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
- return ret;
-}
-
void lbs_queue_event(struct lbs_private *priv, u32 event)
{
unsigned long flags;
--- linux-wl.orig/drivers/net/wireless/libertas/scan.c
+++ linux-wl/drivers/net/wireless/libertas/scan.c
@@ -15,6 +15,7 @@
#include "decl.h"
#include "dev.h"
#include "scan.h"
+#include "assoc.h"
#include "cmd.h"
//! Approximate amount of data needed to pass a scan result back to iwlist
@@ -121,6 +122,189 @@
+/*********************************************************************/
+/* */
+/* Region channel support */
+/* */
+/*********************************************************************/
+
+#define LBS_TX_PWR_DEFAULT 20 /*100mW */
+#define LBS_TX_PWR_US_DEFAULT 20 /*100mW */
+#define LBS_TX_PWR_JP_DEFAULT 16 /*50mW */
+#define LBS_TX_PWR_FR_DEFAULT 20 /*100mW */
+#define LBS_TX_PWR_EMEA_DEFAULT 20 /*100mW */
+
+/* Format { channel, frequency (MHz), maxtxpower } */
+/* band: 'B/G', region: USA FCC/Canada IC */
+static struct chan_freq_power channel_freq_power_US_BG[] = {
+ {1, 2412, LBS_TX_PWR_US_DEFAULT},
+ {2, 2417, LBS_TX_PWR_US_DEFAULT},
+ {3, 2422, LBS_TX_PWR_US_DEFAULT},
+ {4, 2427, LBS_TX_PWR_US_DEFAULT},
+ {5, 2432, LBS_TX_PWR_US_DEFAULT},
+ {6, 2437, LBS_TX_PWR_US_DEFAULT},
+ {7, 2442, LBS_TX_PWR_US_DEFAULT},
+ {8, 2447, LBS_TX_PWR_US_DEFAULT},
+ {9, 2452, LBS_TX_PWR_US_DEFAULT},
+ {10, 2457, LBS_TX_PWR_US_DEFAULT},
+ {11, 2462, LBS_TX_PWR_US_DEFAULT}
+};
+
+/* band: 'B/G', region: Europe ETSI */
+static struct chan_freq_power channel_freq_power_EU_BG[] = {
+ {1, 2412, LBS_TX_PWR_EMEA_DEFAULT},
+ {2, 2417, LBS_TX_PWR_EMEA_DEFAULT},
+ {3, 2422, LBS_TX_PWR_EMEA_DEFAULT},
+ {4, 2427, LBS_TX_PWR_EMEA_DEFAULT},
+ {5, 2432, LBS_TX_PWR_EMEA_DEFAULT},
+ {6, 2437, LBS_TX_PWR_EMEA_DEFAULT},
+ {7, 2442, LBS_TX_PWR_EMEA_DEFAULT},
+ {8, 2447, LBS_TX_PWR_EMEA_DEFAULT},
+ {9, 2452, LBS_TX_PWR_EMEA_DEFAULT},
+ {10, 2457, LBS_TX_PWR_EMEA_DEFAULT},
+ {11, 2462, LBS_TX_PWR_EMEA_DEFAULT},
+ {12, 2467, LBS_TX_PWR_EMEA_DEFAULT},
+ {13, 2472, LBS_TX_PWR_EMEA_DEFAULT}
+};
+
+/* band: 'B/G', region: Spain */
+static struct chan_freq_power channel_freq_power_SPN_BG[] = {
+ {10, 2457, LBS_TX_PWR_DEFAULT},
+ {11, 2462, LBS_TX_PWR_DEFAULT}
+};
+
+/* band: 'B/G', region: France */
+static struct chan_freq_power channel_freq_power_FR_BG[] = {
+ {10, 2457, LBS_TX_PWR_FR_DEFAULT},
+ {11, 2462, LBS_TX_PWR_FR_DEFAULT},
+ {12, 2467, LBS_TX_PWR_FR_DEFAULT},
+ {13, 2472, LBS_TX_PWR_FR_DEFAULT}
+};
+
+/* band: 'B/G', region: Japan */
+static struct chan_freq_power channel_freq_power_JPN_BG[] = {
+ {1, 2412, LBS_TX_PWR_JP_DEFAULT},
+ {2, 2417, LBS_TX_PWR_JP_DEFAULT},
+ {3, 2422, LBS_TX_PWR_JP_DEFAULT},
+ {4, 2427, LBS_TX_PWR_JP_DEFAULT},
+ {5, 2432, LBS_TX_PWR_JP_DEFAULT},
+ {6, 2437, LBS_TX_PWR_JP_DEFAULT},
+ {7, 2442, LBS_TX_PWR_JP_DEFAULT},
+ {8, 2447, LBS_TX_PWR_JP_DEFAULT},
+ {9, 2452, LBS_TX_PWR_JP_DEFAULT},
+ {10, 2457, LBS_TX_PWR_JP_DEFAULT},
+ {11, 2462, LBS_TX_PWR_JP_DEFAULT},
+ {12, 2467, LBS_TX_PWR_JP_DEFAULT},
+ {13, 2472, LBS_TX_PWR_JP_DEFAULT},
+ {14, 2484, LBS_TX_PWR_JP_DEFAULT}
+};
+
+/**
+ * the structure for channel, frequency and power
+ */
+struct region_cfp_table {
+ u8 region;
+ struct chan_freq_power *cfp_BG;
+ int cfp_no_BG;
+};
+
+/**
+ * the structure for the mapping between region and CFP
+ */
+static struct region_cfp_table region_cfp_table[] = {
+ {0x10, /*US FCC */
+ channel_freq_power_US_BG,
+ ARRAY_SIZE(channel_freq_power_US_BG),
+ }
+ ,
+ {0x20, /*CANADA IC */
+ channel_freq_power_US_BG,
+ ARRAY_SIZE(channel_freq_power_US_BG),
+ }
+ ,
+ {0x30, /*EU*/ channel_freq_power_EU_BG,
+ ARRAY_SIZE(channel_freq_power_EU_BG),
+ }
+ ,
+ {0x31, /*SPAIN*/ channel_freq_power_SPN_BG,
+ ARRAY_SIZE(channel_freq_power_SPN_BG),
+ }
+ ,
+ {0x32, /*FRANCE*/ channel_freq_power_FR_BG,
+ ARRAY_SIZE(channel_freq_power_FR_BG),
+ }
+ ,
+ {0x40, /*JAPAN*/ channel_freq_power_JPN_BG,
+ ARRAY_SIZE(channel_freq_power_JPN_BG),
+ }
+ ,
+/*Add new region here */
+};
+
+/**
+ * @brief This function finds the CFP in
+ * region_cfp_table based on region and band parameter.
+ *
+ * @param region The region code
+ * @param band The band
+ * @param cfp_no A pointer to CFP number
+ * @return A pointer to CFP
+ */
+static struct chan_freq_power *lbs_get_region_cfp_table(u8 region, int *cfp_no)
+{
+ int i, end;
+
+ lbs_deb_enter(LBS_DEB_MAIN);
+
+ end = ARRAY_SIZE(region_cfp_table);
+
+ for (i = 0; i < end ; i++) {
+ lbs_deb_main("region_cfp_table[i].region=%d\n",
+ region_cfp_table[i].region);
+ if (region_cfp_table[i].region == region) {
+ *cfp_no = region_cfp_table[i].cfp_no_BG;
+ lbs_deb_leave(LBS_DEB_MAIN);
+ return region_cfp_table[i].cfp_BG;
+ }
+ }
+
+ lbs_deb_leave_args(LBS_DEB_MAIN, "ret NULL");
+ return NULL;
+}
+
+int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band)
+{
+ int ret = 0;
+ int i = 0;
+
+ struct chan_freq_power *cfp;
+ int cfp_no;
+
+ lbs_deb_enter(LBS_DEB_MAIN);
+
+ memset(priv->region_channel, 0, sizeof(priv->region_channel));
+
+ cfp = lbs_get_region_cfp_table(region, &cfp_no);
+ if (cfp != NULL) {
+ priv->region_channel[i].nrcfp = cfp_no;
+ priv->region_channel[i].CFP = cfp;
+ } else {
+ lbs_deb_main("wrong region code %#x in band B/G\n",
+ region);
+ ret = -1;
+ goto out;
+ }
+ priv->region_channel[i].valid = 1;
+ priv->region_channel[i].region = region;
+ priv->region_channel[i].band = band;
+ i++;
+out:
+ lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
+ return ret;
+}
+
+
+
/*********************************************************************/
/* */
--- linux-wl.orig/drivers/net/wireless/libertas/scan.h
+++ linux-wl/drivers/net/wireless/libertas/scan.h
@@ -9,8 +9,36 @@
#include <net/iw_handler.h>
+struct lbs_private;
+
#define MAX_NETWORK_COUNT 128
+/** Chan-freq-TxPower mapping table*/
+struct chan_freq_power {
+ /** channel Number */
+ u16 channel;
+ /** frequency of this channel */
+ u32 freq;
+ /** Max allowed Tx power level */
+ u16 maxtxpower;
+ /** TRUE:channel unsupported; FLASE:supported*/
+ u8 unsupported;
+};
+
+/** region-band mapping table*/
+struct region_channel {
+ /** TRUE if this entry is valid */
+ u8 valid;
+ /** region code for US, Japan ... */
+ u8 region;
+ /** band B/G/A, used for BAND_CONFIG cmd */
+ u8 band;
+ /** Actual No. of elements in the array below */
+ u8 nrcfp;
+ /** chan-freq-txpower mapping table*/
+ struct chan_freq_power *CFP;
+};
+
/**
* @brief Maximum number of channels that can be sent in a setuserscan ioctl
*/
@@ -18,6 +46,8 @@
int lbs_ssid_cmp(u8 *ssid1, u8 ssid1_len, u8 *ssid2, u8 ssid2_len);
+int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band);
+
int lbs_send_specific_ssid_scan(struct lbs_private *priv, u8 *ssid,
u8 ssid_len);
--