This now makes decl.h only contain declarations for functions that don't
have their own *.h file.
No function change.
Signed-off-by: Holger Schurig <[email protected]>
---
--- linux-wl.orig/drivers/net/wireless/libertas/decl.h
+++ linux-wl/drivers/net/wireless/libertas/decl.h
@@ -8,46 +8,30 @@
#include <linux/netdevice.h>
-#include "defs.h"
-
-extern const struct ethtool_ops lbs_ethtool_ops;
-
-/** Function Prototype Declaration */
struct lbs_private;
struct sk_buff;
struct net_device;
-struct cmd_ctrl_node;
-struct cmd_ds_command;
-int lbs_suspend(struct lbs_private *priv);
-void lbs_resume(struct lbs_private *priv);
-
-void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count);
-void lbs_queue_event(struct lbs_private *priv, u32 event);
-void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx);
-int lbs_enter_auto_deep_sleep(struct lbs_private *priv);
-int lbs_exit_auto_deep_sleep(struct lbs_private *priv);
+/* ethtool.c */
+extern const struct ethtool_ops lbs_ethtool_ops;
-u32 lbs_fw_index_to_data_rate(u8 index);
-u8 lbs_data_rate_to_fw_index(u32 rate);
-/** The proc fs interface */
+/* tx.c */
+void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count);
netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev);
+/* rx.c */
int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *);
-struct chan_freq_power *lbs_find_cfp_by_band_and_channel(
- struct lbs_private *priv,
- u8 band,
- u16 channel);
/* persistcfg.c */
void lbs_persist_config_init(struct net_device *net);
void lbs_persist_config_remove(struct net_device *net);
+
/* main.c */
struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
void lbs_remove_card(struct lbs_private *priv);
@@ -55,5 +39,17 @@
void lbs_stop_card(struct lbs_private *priv);
void lbs_host_to_card_done(struct lbs_private *priv);
+int lbs_suspend(struct lbs_private *priv);
+void lbs_resume(struct lbs_private *priv);
+
+void lbs_queue_event(struct lbs_private *priv, u32 event);
+void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx);
+
+int lbs_enter_auto_deep_sleep(struct lbs_private *priv);
+int lbs_exit_auto_deep_sleep(struct lbs_private *priv);
+
+u32 lbs_fw_index_to_data_rate(u8 index);
+u8 lbs_data_rate_to_fw_index(u32 rate);
+
#endif
--- linux-wl.orig/drivers/net/wireless/libertas/scan.c
+++ linux-wl/drivers/net/wireless/libertas/scan.c
@@ -12,10 +12,10 @@
#include <net/lib80211.h>
#include "host.h"
-#include "decl.h"
#include "dev.h"
#include "scan.h"
#include "assoc.h"
+#include "wext.h"
#include "cmd.h"
//! Approximate amount of data needed to pass a scan result back to iwlist
--- linux-wl.orig/drivers/net/wireless/libertas/wext.h
+++ linux-wl/drivers/net/wireless/libertas/wext.h
@@ -10,4 +10,9 @@
extern struct iw_handler_def lbs_handler_def;
extern struct iw_handler_def mesh_handler_def;
+struct chan_freq_power *lbs_find_cfp_by_band_and_channel(
+ struct lbs_private *priv,
+ u8 band,
+ u16 channel);
+
#endif
--- linux-wl.orig/drivers/net/wireless/libertas/cmd.c
+++ linux-wl/drivers/net/wireless/libertas/cmd.c
@@ -3,10 +3,10 @@
* It prepares command and sends it to firmware when it is ready.
*/
-#include <net/iw_handler.h>
#include <net/lib80211.h>
#include <linux/kfifo.h>
#include <linux/sched.h>
+
#include "host.h"
#include "decl.h"
#include "defs.h"
@@ -16,6 +16,7 @@
#include "scan.h"
#include "cmd.h"
+
static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv);
/**
--