I tried to build the toolchain from an uptodate pull of the git
repository,
I am getting a sequence of errors when the build reach libssp.
My guess would be that libssp is not needed for the ar9170 firmware.
Is this correct and I would appreciate an easy suguestion to
disable it if so.
make[3]: Entering directory `/usr/src/ar9170-fw/toolchain/build/gcc/sh-elf/libssp'
if/bin/bash ./libtool --tag=CC --mode=compile
/usr/src/ar9170-fw/toolchain/build/gcc/./gcc/xgcc
-B/usr/src/ar9170-fw/toolchain/build/gcc/./gcc/
-B/usr/src/ar9170-fw/toolchain/inst/sh-elf/bin/
-B/usr/src/ar9170-fw/toolchain/inst/sh-elf/lib/ -isystem
/usr/src/ar9170-fw/toolchain/inst/sh-elf/include -isystem
/usr/src/ar9170-fw/toolchain/inst/sh-elf/sys-include -DHAVE_CONFIG_H -I.
-I/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp -I. -Wall -O2 -g -g -O2 -MT
ssp.lo -MD -MP -MF ".deps/ssp.Tpo" -c -o ssp.lo
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c; \
then mv -f ".deps/ssp.Tpo" ".deps/ssp.Plo"; else rm -f ".deps/ssp.Tpo"; exit 1; fi
libtool: compile:/usr/src/ar9170-fw/toolchain/build/gcc/./gcc/xgcc
-B/usr/src/ar9170-fw/toolchain/build/gcc/./gcc/
-B/usr/src/ar9170-fw/toolchain/inst/sh-elf/bin/
-B/usr/src/ar9170-fw/toolchain/inst/sh-elf/lib/ -isystem
/usr/src/ar9170-fw/toolchain/inst/sh-elf/include -isystem
/usr/src/ar9170-fw/toolchain/inst/sh-elf/sys-include -DHAVE_CONFIG_H -I.
-I/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp -I. -Wall -O2 -g -g -O2 -MT
ssp.lo -MD -MP -MF .deps/ssp.Tpo -c
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c -o ssp.o
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c: In function
'__guard_setup':
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:70: warning: implicit
declaration of function 'open'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:70: error: 'O_RDONLY'
undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:70: error: (Each
undeclared identifier is reported only once
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:70: error: for each
function it appears in.)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:73: error: 'ssize_t'
undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:73: error: expected ';'
before 'size'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:75: warning: implicit
declaration of function 'close'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:76: error: 'size'
undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c: At top level:
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:89: error: expected
declaration specifiers or '...' before 'size_t'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c: In function 'fail':
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:100: error: 'O_WRONLY'
undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:104: error: 'size_t'
undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:104: error: expected ';'
before 'progname_len'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:107: error:
'progname_len' undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:107: warning: implicit
declaration of function 'strlen'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:107: warning:
incompatible implicit declaration of built-in function 'strlen'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:108: error: 'len'
undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:108: error: 'msg1len'
undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:109: warning: implicit
declaration of function 'alloca'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:109: warning:
incompatible implicit declaration of built-in function 'alloca'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:111: warning: implicit
declaration of function 'memcpy'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:111: warning:
incompatible implicit declaration of built-in function 'memcpy'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:119: error: 'ssize_t'
undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:119: error: expected ';'
before 'wrote'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:120: error: 'wrote'
undeclared (first use in this function)
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:151: warning: implicit
declaration of function '_exit'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:151: warning:
incompatible implicit declaration of built-in function '_exit'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c: In function
'__stack_chk_fail':
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:161: warning:
incompatible implicit declaration of built-in function 'strlen'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:161: warning: passing
argument 2 of 'fail' makes pointer from integer without a cast
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:161: error: too many
arguments to function 'fail'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c: In function '__chk_fail':
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:168: warning:
incompatible implicit declaration of built-in function 'strlen'
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:168: warning: passing
argument 2 of 'fail' makes pointer from integer without a cast
/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:168: error: too many
arguments to function 'fail'
make[3]: *** [ssp.lo] Error 1
make[3]: Leaving directory `/usr/src/ar9170-fw/toolchain/build/gcc/sh-elf/libssp'
make[2]: *** [install-target-libssp] Error 2
make[2]: Leaving directory `/usr/src/ar9170-fw/toolchain/build/gcc'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/usr/src/ar9170-fw/toolchain/build/gcc'
make: *** [gcc] Error 2
--
Dave Lynch DLA Systems
Software Development: Embedded Linux
717.587.7774 [email protected] http://www.dlasys.net
Over 25 years' experience in platforms, languages, and technologies too numerous to list.
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
Albert Einstein
On 04/30/2010 09:23 PM, Stefan Lippers-Hollmann wrote:
> Hi
>
> I assume your host's /bin/sh is not bash.
>
ubuntu default
ls -al /bin/sh
lrwxrwxrwx 1 root root 4 2010-04-02 01:25 sh -> dash
I have bumped into similar problems with buildroot.
Is there a serious downside to linking /bin/sh to bash ?
> ---------------------------------------------------------------------------
>
> ar9170.fw: fix bashisms while building the cross toolchain.
>
> Signed-off-by: Stefan Lippers-Hollmann<[email protected]>
>
> --- a/toolchain/Makefile
> +++ b/toolchain/Makefile
> @@ -31,7 +31,8 @@ src/newlib-$(NEWLIB_VER): src/$(NEWLIB_T
>
> src/gcc-$(GCC_VER): src/$(GCC_TAR) src/newlib-$(NEWLIB_VER)
> tar -C src -xjf $<
> - ln -s $(BASEDIR)/src/newlib-$(NEWLIB_VER)/{newlib,libgloss} $@
> + ln -s $(BASEDIR)/src/newlib-$(NEWLIB_VER)/newlib $@
> + ln -s $(BASEDIR)/src/newlib-$(NEWLIB_VER)/libgloss $@
>
> binutils: src/binutils-$(BINUTILS_VER)
> mkdir -p build/binutils
>
> ---------------------------------------------------------------------------
>
> While you're at it, I'd suggest to bump the versions for the required
> cross-build environment as well, as it noticably improves stability of the
> firmware images built by it (still not perfectly, but better).
>
> ---------------------------------------------------------------------------
>
> ar9170.fw: update cross-toolchain.
>
> Updating the toolchain improves stability of the built firmware images
> significantly.
>
> * gcc-4.4.4
> * binutils-2.20.1
> * newlib 1.18.0
>
> Signed-off-by: Stefan Lippers-Hollmann<[email protected]>
>
> --- a/toolchain/Makefile
> +++ b/toolchain/Makefile
> @@ -1,12 +1,12 @@
> -BINUTILS_VER=2.19.1
> +BINUTILS_VER=2.20.1
> BINUTILS_URL=http://mirrors.kernel.org/gnu/binutils/binutils-$(BINUTILS_VER).tar.bz2
> BINUTILS_TAR=binutils-$(BINUTILS_VER).tar.bz2
>
> -NEWLIB_VER=1.17.0
> +NEWLIB_VER=1.18.0
> NEWLIB_URL=ftp://sources.redhat.com/pub/newlib/newlib-$(NEWLIB_VER).tar.gz
> NEWLIB_TAR=newlib-$(NEWLIB_VER).tar.gz
>
> -GCC_VER=4.3.3
> +GCC_VER=4.4.4
> GCC_URL=http://mirrors.kernel.org/gnu/gcc/gcc-$(GCC_VER)/gcc-core-$(GCC_VER).tar.bz2
> GCC_TAR=gcc-core-$(GCC_VER).tar.bz2
>
> ---------------------------------------------------------------------------
>
> Regards
> Stefan Lippers-Hollmann
>
--
Dave Lynch DLA Systems
Software Development: Embedded Linux
717.587.7774 [email protected] http://www.dlasys.net
Over 25 years' experience in platforms, languages, and technologies too numerous to list.
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
Albert Einstein
Did a git pull and picked up the bashisms and versions update.
At HEAD I get build failures in bfd
----------------------------------
make[5]: Entering directory
`/usr/src/ar9170-fw/toolchain/build/binutils/bfd'
1011 /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I.
-I/usr/src/ar9170-fw/toolchain/src/binutils-2.20.1/bfd
1012 libtool: compile: gcc -DHAVE_CONFIG_H -I.
-I/usr/src/ar9170-fw/toolchain/src/binutils-2.20.1/bfd -I.
-I/usr/src/ar9170-fw/
1013 cc1: warnings being treated as errors
1014 In file included from
/usr/src/ar9170-fw/toolchain/src/binutils-2.20.1/bfd/elf32-sh.c:6055:
1015 ./elf32-target.h:718: error: initialization makes pointer from
integer without a cast
1016 ./elf32-target.h:731: error: large integer implicitly truncated to
unsigned type
1017 ./elf32-target.h:738: error: missing initializer
1018 ./elf32-target.h:738: error: (near initialization for
?elf32_bed.want_p_paddr_set_to_zero?)
1019 ./elf32-target.h:826: error: ?bfd_elf32_bfd_define_common_symbol?
undeclared here (not in a function)
1020 In file included from
/usr/src/ar9170-fw/toolchain/src/binutils-2.20.1/bfd/elf32-sh.c:6074:
------------------------------------
If I back off to
dc858db5b191d70362d30f90906d68c1c3c2c972
the bashism fixes I get the same build errors in libssp in my first email.
In an unrelated toolchain build project (buildroot for a ppc405) I get
libssp errors if I enable SSP.
I am reading the errors is a failure to properly include standard headers.
I am working under ubuntu lucid
gcc --ver as follows:
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
4.4.3-4ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.4/README.Bugs
--enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr
--enable-shared --enable-multiarch --enable-linker-build-id
--with-system-zlib --libexecdir=/usr/lib --without-included-gettext
--enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.4
--program-suffix=-4.4 --enable-nls --enable-clocale=gnu
--enable-libstdcxx-debug --enable-plugin --enable-objc-gc
--enable-targets=all --disable-werror --with-arch-32=i486
--with-tune=generic --enable-checking=release --build=i486-linux-gnu
--host=i486-linux-gnu --target=i486-linux-gnu
Thread model: posix
gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5)
Alternately maybe I am missing some development dependency that
configure is not warning about
On 04/30/2010 09:23 PM, Stefan Lippers-Hollmann wrote:
> Hi
>
> On Saturday 01 May 2010, David H. Lynch Jr. wrote:
>
>> I tried to build the toolchain from an uptodate pull of the git
>> repository,
>>
>> I am getting a sequence of errors when the build reach libssp.
>>
>> My guess would be that libssp is not needed for the ar9170 firmware.
>>
>> Is this correct and I would appreciate an easy suguestion to
>> disable it if so.
>>
>> make[3]: Entering directory `/usr/src/ar9170-fw/toolchain/build/gcc/sh-elf/libssp'
>>
> [...]
>
>> -I/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp -I. -Wall -O2 -g -g -O2 -MT
>> ssp.lo -MD -MP -MF .deps/ssp.Tpo -c
>> /usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c -o ssp.o
>> /usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c: In function
>> '__guard_setup':
>> /usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:70: warning: implicit
>> declaration of function 'open'
>> /usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:70: error: 'O_RDONLY'
>> undeclared (first use in this function)
>>
> [...]
>
> I assume your host's /bin/sh is not bash.
>
> ---------------------------------------------------------------------------
>
> ar9170.fw: fix bashisms while building the cross toolchain.
>
> Signed-off-by: Stefan Lippers-Hollmann<[email protected]>
>
> --- a/toolchain/Makefile
> +++ b/toolchain/Makefile
> @@ -31,7 +31,8 @@ src/newlib-$(NEWLIB_VER): src/$(NEWLIB_T
>
> src/gcc-$(GCC_VER): src/$(GCC_TAR) src/newlib-$(NEWLIB_VER)
> tar -C src -xjf $<
> - ln -s $(BASEDIR)/src/newlib-$(NEWLIB_VER)/{newlib,libgloss} $@
> + ln -s $(BASEDIR)/src/newlib-$(NEWLIB_VER)/newlib $@
> + ln -s $(BASEDIR)/src/newlib-$(NEWLIB_VER)/libgloss $@
>
> binutils: src/binutils-$(BINUTILS_VER)
> mkdir -p build/binutils
>
> ---------------------------------------------------------------------------
>
> While you're at it, I'd suggest to bump the versions for the required
> cross-build environment as well, as it noticably improves stability of the
> firmware images built by it (still not perfectly, but better).
>
> ---------------------------------------------------------------------------
>
> ar9170.fw: update cross-toolchain.
>
> Updating the toolchain improves stability of the built firmware images
> significantly.
>
> * gcc-4.4.4
> * binutils-2.20.1
> * newlib 1.18.0
>
> Signed-off-by: Stefan Lippers-Hollmann<[email protected]>
>
> --- a/toolchain/Makefile
> +++ b/toolchain/Makefile
> @@ -1,12 +1,12 @@
> -BINUTILS_VER=2.19.1
> +BINUTILS_VER=2.20.1
> BINUTILS_URL=http://mirrors.kernel.org/gnu/binutils/binutils-$(BINUTILS_VER).tar.bz2
> BINUTILS_TAR=binutils-$(BINUTILS_VER).tar.bz2
>
> -NEWLIB_VER=1.17.0
> +NEWLIB_VER=1.18.0
> NEWLIB_URL=ftp://sources.redhat.com/pub/newlib/newlib-$(NEWLIB_VER).tar.gz
> NEWLIB_TAR=newlib-$(NEWLIB_VER).tar.gz
>
> -GCC_VER=4.3.3
> +GCC_VER=4.4.4
> GCC_URL=http://mirrors.kernel.org/gnu/gcc/gcc-$(GCC_VER)/gcc-core-$(GCC_VER).tar.bz2
> GCC_TAR=gcc-core-$(GCC_VER).tar.bz2
>
> ---------------------------------------------------------------------------
>
> Regards
> Stefan Lippers-Hollmann
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Dave Lynch DLA Systems
Software Development: Embedded Linux
717.587.7774 [email protected] http://www.dlasys.net
Over 25 years' experience in platforms, languages, and technologies too numerous to list.
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
Albert Einstein
Hi,
> > I tried to build the toolchain from an uptodate pull of the git
> > repository,
Not sure if that's still my repository, but
> ar9170.fw: fix bashisms while building the cross toolchain.
> ar9170.fw: update cross-toolchain.
I applied both your patches to it.
johannes
Hi
On Saturday 01 May 2010, David H. Lynch Jr. wrote:
> Did a git pull and picked up the bashisms and versions update.
> At HEAD I get build failures in bfd
>
> ----------------------------------
> make[5]: Entering directory
> `/usr/src/ar9170-fw/toolchain/build/binutils/bfd'
> 1011 /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I.
> -I/usr/src/ar9170-fw/toolchain/src/binutils-2.20.1/bfd
> 1012 libtool: compile: gcc -DHAVE_CONFIG_H -I.
> -I/usr/src/ar9170-fw/toolchain/src/binutils-2.20.1/bfd -I.
> -I/usr/src/ar9170-fw/
> 1013 cc1: warnings being treated as errors
> 1014 In file included from
> /usr/src/ar9170-fw/toolchain/src/binutils-2.20.1/bfd/elf32-sh.c:6055:
> 1015 ./elf32-target.h:718: error: initialization makes pointer from
> integer without a cast
> 1016 ./elf32-target.h:731: error: large integer implicitly truncated to
> unsigned type
> 1017 ./elf32-target.h:738: error: missing initializer
> 1018 ./elf32-target.h:738: error: (near initialization for
> ?elf32_bed.want_p_paddr_set_to_zero?)
> 1019 ./elf32-target.h:826: error: ?bfd_elf32_bfd_define_common_symbol?
> undeclared here (not in a function)
> 1020 In file included from
> /usr/src/ar9170-fw/toolchain/src/binutils-2.20.1/bfd/elf32-sh.c:6074:
> ------------------------------------
>
> If I back off to
> dc858db5b191d70362d30f90906d68c1c3c2c972
> the bashism fixes I get the same build errors in libssp in my first email.
>
> In an unrelated toolchain build project (buildroot for a ppc405) I get
> libssp errors if I enable SSP.
>
> I am reading the errors is a failure to properly include standard headers.
>
> I am working under ubuntu lucid
[...]
> Alternately maybe I am missing some development dependency that
> configure is not warning about
I have verified before sending the mail yesterday that ar9170.fw still
builds fine on current Debian unstable (gcc-4.4, but it also worked on
4.4.2, 4.4.3 before; confirmed in a minimal build chroot (pbuilder)
environment), so you're likely just missing build dependencies.
# apt-get install build-essential
# apt-get build-dep gcc-4.4 binutils newlib
While this pulls a little more than you'd absolutely need, it still makes
sure that all eventual build dependencies are covered.
Regards
Stefan Lippers-Hollmann
Hi
On Saturday 01 May 2010, David H. Lynch Jr. wrote:
> I tried to build the toolchain from an uptodate pull of the git
> repository,
>
> I am getting a sequence of errors when the build reach libssp.
>
> My guess would be that libssp is not needed for the ar9170 firmware.
>
> Is this correct and I would appreciate an easy suguestion to
> disable it if so.
>
> make[3]: Entering directory `/usr/src/ar9170-fw/toolchain/build/gcc/sh-elf/libssp'
[...]
> -I/usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp -I. -Wall -O2 -g -g -O2 -MT
> ssp.lo -MD -MP -MF .deps/ssp.Tpo -c
> /usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c -o ssp.o
> /usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c: In function
> '__guard_setup':
> /usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:70: warning: implicit
> declaration of function 'open'
> /usr/src/ar9170-fw/toolchain/src/gcc-4.3.3/libssp/ssp.c:70: error: 'O_RDONLY'
> undeclared (first use in this function)
[...]
I assume your host's /bin/sh is not bash.
---------------------------------------------------------------------------
ar9170.fw: fix bashisms while building the cross toolchain.
Signed-off-by: Stefan Lippers-Hollmann <[email protected]>
--- a/toolchain/Makefile
+++ b/toolchain/Makefile
@@ -31,7 +31,8 @@ src/newlib-$(NEWLIB_VER): src/$(NEWLIB_T
src/gcc-$(GCC_VER): src/$(GCC_TAR) src/newlib-$(NEWLIB_VER)
tar -C src -xjf $<
- ln -s $(BASEDIR)/src/newlib-$(NEWLIB_VER)/{newlib,libgloss} $@
+ ln -s $(BASEDIR)/src/newlib-$(NEWLIB_VER)/newlib $@
+ ln -s $(BASEDIR)/src/newlib-$(NEWLIB_VER)/libgloss $@
binutils: src/binutils-$(BINUTILS_VER)
mkdir -p build/binutils
---------------------------------------------------------------------------
While you're at it, I'd suggest to bump the versions for the required
cross-build environment as well, as it noticably improves stability of the
firmware images built by it (still not perfectly, but better).
---------------------------------------------------------------------------
ar9170.fw: update cross-toolchain.
Updating the toolchain improves stability of the built firmware images
significantly.
* gcc-4.4.4
* binutils-2.20.1
* newlib 1.18.0
Signed-off-by: Stefan Lippers-Hollmann <[email protected]>
--- a/toolchain/Makefile
+++ b/toolchain/Makefile
@@ -1,12 +1,12 @@
-BINUTILS_VER=2.19.1
+BINUTILS_VER=2.20.1
BINUTILS_URL=http://mirrors.kernel.org/gnu/binutils/binutils-$(BINUTILS_VER).tar.bz2
BINUTILS_TAR=binutils-$(BINUTILS_VER).tar.bz2
-NEWLIB_VER=1.17.0
+NEWLIB_VER=1.18.0
NEWLIB_URL=ftp://sources.redhat.com/pub/newlib/newlib-$(NEWLIB_VER).tar.gz
NEWLIB_TAR=newlib-$(NEWLIB_VER).tar.gz
-GCC_VER=4.3.3
+GCC_VER=4.4.4
GCC_URL=http://mirrors.kernel.org/gnu/gcc/gcc-$(GCC_VER)/gcc-core-$(GCC_VER).tar.bz2
GCC_TAR=gcc-core-$(GCC_VER).tar.bz2
---------------------------------------------------------------------------
Regards
Stefan Lippers-Hollmann