This is flooded to syslog quite a few times when connecting to another
Linux box in adhoc mode. Syslog files fill up the disk fast:
$ dmesg | tail -10
[ 1986.772018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1986.776149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1986.780076] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1986.784020] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1986.788149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1986.792108] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1986.796070] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1986.800018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1986.804186] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1986.808072] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
Tested on a Thinkpad T60 with Intel Corporation PRO/Wireless 3945ABG [Golan]
Network Connection (rev 02) running vanilla 2.6.34 kernel.
Signed-off-by: Mikko Rapeli <[email protected]>
---
net/mac80211/ibss.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index e2976da..eab174f 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -478,8 +478,10 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata)
if (ifibss->fixed_channel)
return;
+#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: No active IBSS STAs - trying to scan for other "
"IBSS networks with same SSID (merge)\n", sdata->name);
+#endif
ieee80211_request_internal_scan(sdata, ifibss->ssid, ifibss->ssid_len);
}
--
1.7.1
On Mon, May 24, 2010 at 04:59:40PM +0300, Mikko Rapeli wrote:
> With debug logging the problem seems to go away, I will try the timer
> patch next:
For some reason I now can't repeat that logging storm with 2.6.32-trunk,
-5 or -3 from Debian, or vanilla 2.6.34. My syslogs are full of these, but
just can't repeat it now. I'm going to run 2.6.34 without MAC802 debug options
for now.
-Mikko
On Sun, May 23, 2010 at 07:22:40PM +0300, Mikko Rapeli wrote:
> Tested on a Thinkpad T60 with Intel Corporation PRO/Wireless 3945ABG [Golan]
> Network Connection (rev 02) running vanilla 2.6.34 kernel.
I tried this first on top of linux-2.6 at commit
f4b87dee923342505e1ddba8d34ce9de33e75050 but there I just got this oops from
iwl3945:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34 (root@totoro) (gcc version 4.4.4 (Debian 4.4.4-2) ) #1 SMP Sun May 23 13:16:39 EEST 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] found SMP MP-table at [c00f6810] f6810
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37638000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 00100000 - 00ab71f3
[ 0.000000] Move RAMDISK from 0000000037638000 - 0000000037fef1f2 to 00100000 - 00ab71f2
[ 0.000000] ACPI: RSDP 000f67e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 7f6d14a0 00084 (v01 LENOVO TP-79 00002260 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6d1600 000F4 (v03 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100428/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20100428/tbfadt-557)
[ 0.000000] ACPI: DSDT 7f6d195e 0D467 (v01 LENOVO TP-79 00002260 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7f6f4000 00040
[ 0.000000] ACPI: SSDT 7f6d17b4 001AA (v01 LENOVO TP-79 00002260 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 7f6dedc5 00052 (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: TCPA 7f6dee17 00032 (v02 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: APIC 7f6dee49 00068 (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: MCFG 7f6deeb1 0003C (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: HPET 7f6deeed 00038 (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: BOOT 7f6defd8 00028 (v01 LENOVO TP-79 00002260 LTP 00000001)
[ 0.000000] ACPI: SSDT 7f6f2655 0025F (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: SSDT 7f6f28b4 000A6 (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: SSDT 7f6f295a 004F7 (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: SSDT 7f6f2e51 001D8 (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6d0
[ 0.000000] On node 0 totalpages: 521838
[ 0.000000] free_area_init_node: node 0, pgdat c138b2c0, node_mem_map c14af020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292308 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [8000 - 87ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34432 r0 d22912 u2097152
[ 0.000000] pcpu-alloc: s34432 r0 d22912 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517760
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34 root=UUID=08c11915-82f3-463a-9e61-b66b56205bdf ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (52 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0001000000 - 00014a6968] TEXT DATA BSS
[ 0.000000] #3 [00014a7000 - 00014ad138] BRK
[ 0.000000] #4 [00000f6820 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f6810 - 00000f6820] MP-table mpf
[ 0.000000] #6 [000009f000 - 000009f5a1] BIOS reserved
[ 0.000000] #7 [000009f6b5 - 00000f6810] BIOS reserved
[ 0.000000] #8 [000009f5a1 - 000009f6b5] MP-table mpc
[ 0.000000] #9 [0000002000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000003000 - 0000007000] ACPI WAKEUP
[ 0.000000] #11 [0000007000 - 0000008000] PGTABLE
[ 0.000000] #12 [0000100000 - 0000ab8000] NEW RAMDISK
[ 0.000000] #13 [00014ae000 - 00014af000] BOOTMEM
[ 0.000000] #14 [00014af000 - 000249f000] BOOTMEM
[ 0.000000] #15 [00014a6980 - 00014a6984] BOOTMEM
[ 0.000000] #16 [00014a69c0 - 00014a6a80] BOOTMEM
[ 0.000000] #17 [00014a6a80 - 00014a6ad4] BOOTMEM
[ 0.000000] #18 [000249f000 - 00024a2000] BOOTMEM
[ 0.000000] #19 [00014a6b00 - 00014a6b6c] BOOTMEM
[ 0.000000] #20 [00024a2000 - 00024a8000] BOOTMEM
[ 0.000000] #21 [00014a6b80 - 00014a6ba5] BOOTMEM
[ 0.000000] #22 [00014a6bc0 - 00014a6be7] BOOTMEM
[ 0.000000] #23 [00014a6c00 - 00014a6da4] BOOTMEM
[ 0.000000] #24 [00014a6dc0 - 00014a6e00] BOOTMEM
[ 0.000000] #25 [00014a6e00 - 00014a6e40] BOOTMEM
[ 0.000000] #26 [00014a6e40 - 00014a6e80] BOOTMEM
[ 0.000000] #27 [00014a6e80 - 00014a6ec0] BOOTMEM
[ 0.000000] #28 [00014a6ec0 - 00014a6f00] BOOTMEM
[ 0.000000] #29 [00014a6f00 - 00014a6f40] BOOTMEM
[ 0.000000] #30 [00014a6f40 - 00014a6f80] BOOTMEM
[ 0.000000] #31 [00014a6f80 - 00014a6fc0] BOOTMEM
[ 0.000000] #32 [00014a6fc0 - 00014a7000] BOOTMEM
[ 0.000000] #33 [00014ad140 - 00014ad180] BOOTMEM
[ 0.000000] #34 [00014ad180 - 00014ad1c0] BOOTMEM
[ 0.000000] #35 [00014ad1c0 - 00014ad200] BOOTMEM
[ 0.000000] #36 [00014ad200 - 00014ad240] BOOTMEM
[ 0.000000] #37 [00014ad240 - 00014ad280] BOOTMEM
[ 0.000000] #38 [00014ad280 - 00014ad290] BOOTMEM
[ 0.000000] #39 [00014ad2c0 - 00014ad318] BOOTMEM
[ 0.000000] #40 [00014ad340 - 00014ad398] BOOTMEM
[ 0.000000] #41 [0002800000 - 000280e000] BOOTMEM
[ 0.000000] #42 [0002a00000 - 0002a0e000] BOOTMEM
[ 0.000000] #43 [00014ad3c0 - 00014ad3c4] BOOTMEM
[ 0.000000] #44 [00014ad400 - 00014ad404] BOOTMEM
[ 0.000000] #45 [00014ad440 - 00014ad448] BOOTMEM
[ 0.000000] #46 [00014ad480 - 00014ad488] BOOTMEM
[ 0.000000] #47 [00014ad4c0 - 00014ad568] BOOTMEM
[ 0.000000] #48 [00014ad580 - 00014ad5e8] BOOTMEM
[ 0.000000] #49 [00024a8000 - 00024ac000] BOOTMEM
[ 0.000000] #50 [00024ac000 - 000252c000] BOOTMEM
[ 0.000000] #51 [000252c000 - 000256c000] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0)
[ 0.000000] Memory: 2055324k/2087744k available (2415k kernel code, 32028k reserved, 1245k data, 380k init, 1178440k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1394000 - 0xc13f3000 ( 380 kB)
[ 0.000000] .data : 0xc125bcef - 0xc1393358 (1245 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125bcef (2415 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1828.617 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.23 BogoMIPS (lpj=7314468)
[ 0.004030] Security Framework initialized
[ 0.004038] SELinux: Disabled at boot.
[ 0.004046] Mount-cache hash table entries: 512
[ 0.004188] Initializing cgroup subsys ns
[ 0.004193] Initializing cgroup subsys cpuacct
[ 0.004198] Initializing cgroup subsys devices
[ 0.004201] Initializing cgroup subsys freezer
[ 0.004204] Initializing cgroup subsys net_cls
[ 0.004231] CPU: Physical Processor ID: 0
[ 0.004233] CPU: Processor Core ID: 0
[ 0.004236] mce: CPU supports 6 MCE banks
[ 0.004247] CPU0: Thermal monitoring enabled (TM2)
[ 0.004251] using mwait in idle threads.
[ 0.004259] Performance Events: Core events, core PMU driver.
[ 0.004267] ... version: 1
[ 0.004269] ... bit width: 40
[ 0.004271] ... generic registers: 2
[ 0.004273] ... value mask: 000000ffffffffff
[ 0.004275] ... max period: 000000007fffffff
[ 0.004277] ... fixed-purpose events: 0
[ 0.004279] ... event mask: 0000000000000003
[ 0.005424] ACPI: Core revision 20100428
[ 0.028055] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028459] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071405] CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 0.072000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.160000] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.160000] Measured 521301 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.160000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.160016] Brought up 2 CPUs
[ 0.160019] Total of 2 processors activated (7314.79 BogoMIPS).
[ 0.160580] regulator: core version 0.5
[ 0.160580] NET: Registered protocol family 16
[ 0.160580] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.160580] ACPI: bus type pci registered
[ 0.160580] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.160580] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.160580] PCI: Using MMCONFIG for extended config space
[ 0.160580] PCI: Using configuration type 1 for base access
[ 0.160580] bio: create slab <bio-0> at 0
[ 0.164153] ACPI: EC: EC description table is found, configuring boot EC
[ 0.177369] ACPI: SSDT 7f6f1d36 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.177969] ACPI: Dynamic OEM Table Load:
[ 0.177973] ACPI: SSDT (null) 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.178354] ACPI: SSDT 7f6f1ffb 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.178983] ACPI: Dynamic OEM Table Load:
[ 0.178986] ACPI: SSDT (null) 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.179459] ACPI: SSDT 7f6f1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.180220] ACPI: Dynamic OEM Table Load:
[ 0.180223] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.180386] ACPI: SSDT 7f6f1f76 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.180970] ACPI: Dynamic OEM Table Load:
[ 0.180973] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.181098] ACPI: Interpreter enabled
[ 0.181108] ACPI: (supports S0 S3 S4 S5)
[ 0.181133] ACPI: Using IOAPIC for interrupt routing
[ 0.189503] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.189551] ACPI: Power Resource [PUBS] (on)
[ 0.193424] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.193428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.193894] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.193945] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.193949] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.193952] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.193956] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.193959] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.193962] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.193966] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.194030] pci 0000:00:02.0: reg 10: [mem 0xee100000-0xee17ffff]
[ 0.194035] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.194041] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.194046] pci 0000:00:02.0: reg 1c: [mem 0xee200000-0xee23ffff]
[ 0.194083] pci 0000:00:02.1: reg 10: [mem 0xee180000-0xee1fffff]
[ 0.194187] pci 0000:00:1b.0: reg 10: [mem 0xee240000-0xee243fff 64bit]
[ 0.194247] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.194253] pci 0000:00:1b.0: PME# disabled
[ 0.194349] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.194354] pci 0000:00:1c.0: PME# disabled
[ 0.194452] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.194458] pci 0000:00:1c.1: PME# disabled
[ 0.194556] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.194561] pci 0000:00:1c.2: PME# disabled
[ 0.194660] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.194665] pci 0000:00:1c.3: PME# disabled
[ 0.194728] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.194790] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.194852] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.194914] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.194973] pci 0000:00:1d.7: reg 10: [mem 0xee444000-0xee4443ff]
[ 0.195035] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.195041] pci 0000:00:1d.7: PME# disabled
[ 0.195203] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.195208] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.195213] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.195218] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.195223] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.195275] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.195284] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.195291] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.195300] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.195308] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.195363] pci 0000:00:1f.2: reg 10: [io 0x18d0-0x18d7]
[ 0.195371] pci 0000:00:1f.2: reg 14: [io 0x18c4-0x18c7]
[ 0.195380] pci 0000:00:1f.2: reg 18: [io 0x18c8-0x18cf]
[ 0.195388] pci 0000:00:1f.2: reg 1c: [io 0x18c0-0x18c3]
[ 0.195396] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.195404] pci 0000:00:1f.2: reg 24: [mem 0xee444400-0xee4447ff]
[ 0.195441] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.195446] pci 0000:00:1f.2: PME# disabled
[ 0.196043] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.196248] pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff]
[ 0.196273] pci 0000:02:00.0: reg 18: [io 0x2000-0x201f]
[ 0.196380] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.196388] pci 0000:02:00.0: PME# disabled
[ 0.196424] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.196429] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.196435] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.196444] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.196640] pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff]
[ 0.196882] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.196895] pci 0000:03:00.0: PME# disabled
[ 0.196960] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.196965] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.196971] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.196980] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.197039] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.197045] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.197050] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.197059] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.197119] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.197124] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff]
[ 0.197130] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.197139] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.197208] pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff]
[ 0.197239] pci 0000:15:00.0: supports D1 D2
[ 0.197241] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.197247] pci 0000:15:00.0: PME# disabled
[ 0.197317] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.197323] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff]
[ 0.197329] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.197337] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.197341] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.197344] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.197347] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.197350] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.197354] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.197357] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.197360] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.197447] pci_bus 0000:00: on NUMA node 0
[ 0.197452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.197607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.197687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.197767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.197853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.197940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.203481] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.203693] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.203904] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204126] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204336] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204545] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.204965] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.205086] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.205100] vgaarb: loaded
[ 0.205115] PCI: Using ACPI for IRQ routing
[ 0.205115] PCI: pci_cache_line_size set to 64 bytes
[ 0.205115] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.205115] reserve RAM buffer: 000000007f6d0000 - 000000007fffffff
[ 0.205115] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.205115] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.205115] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.208018] Switching to clocksource hpet
[ 0.209499] pnp: PnP ACPI init
[ 0.209510] ACPI: bus type pnp registered
[ 0.213740] pnp: PnP ACPI: found 11 devices
[ 0.213742] ACPI: ACPI bus type pnp unregistered
[ 0.213746] PnPBIOS: Disabled by ACPI PNP
[ 0.213758] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.213762] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.213766] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.213769] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.213773] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.213776] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.213780] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.213783] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.213787] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.213790] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.213794] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.213798] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.213802] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.213809] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.213812] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.213816] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.213819] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.213822] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.213826] system 00:02: [io 0x1600-0x165f] could not be reserved
[ 0.213830] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.213833] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.213837] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.213840] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.213844] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.213848] system 00:02: [mem 0xfed40000-0xfed40fff] has been reserved
[ 0.248630] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.248634] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.248638] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.248645] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.248651] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.248660] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.248664] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.248671] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.248677] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.248685] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.248689] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.248696] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.248702] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.248710] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.248714] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff]
[ 0.248721] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.248727] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.248736] pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
[ 0.248740] pci 0000:15:00.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[ 0.248744] pci 0000:15:00.0: BAR 13: assigned [io 0x9000-0x90ff]
[ 0.248747] pci 0000:15:00.0: BAR 14: assigned [io 0x9400-0x94ff]
[ 0.248750] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.248752] pci 0000:15:00.0: bridge window [io 0x9000-0x90ff]
[ 0.248759] pci 0000:15:00.0: bridge window [io 0x9400-0x94ff]
[ 0.248765] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
[ 0.248772] pci 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff]
[ 0.248779] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.248782] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff]
[ 0.248789] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.248795] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.248815] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.248822] pci 0000:00:1c.0: setting latency timer to 64
[ 0.248834] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.248840] pci 0000:00:1c.1: setting latency timer to 64
[ 0.248851] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.248856] pci 0000:00:1c.2: setting latency timer to 64
[ 0.248868] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.248873] pci 0000:00:1c.3: setting latency timer to 64
[ 0.248879] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.248886] pci 0000:00:1e.0: setting latency timer to 64
[ 0.248900] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.248907] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.248910] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.248913] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.248916] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.248919] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.248922] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.248925] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.248928] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.248930] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
[ 0.248934] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.248937] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff]
[ 0.248940] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
[ 0.248943] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.248946] pci_bus 0000:04: resource 0 [io 0x5000-0x6fff]
[ 0.248949] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.248952] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.248955] pci_bus 0000:0c: resource 0 [io 0x7000-0x8fff]
[ 0.248958] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
[ 0.248961] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.248964] pci_bus 0000:15: resource 0 [io 0x9000-0xcfff]
[ 0.248967] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
[ 0.248970] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.248973] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.248976] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.248979] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.248982] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.248984] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.248987] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.248990] pci_bus 0000:15: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.248993] pci_bus 0000:16: resource 0 [io 0x9000-0x90ff]
[ 0.248996] pci_bus 0000:16: resource 1 [io 0x9400-0x94ff]
[ 0.248999] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
[ 0.249002] pci_bus 0000:16: resource 3 [mem 0x84000000-0x87ffffff]
[ 0.249030] NET: Registered protocol family 2
[ 0.249089] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.249317] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.250014] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.250363] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.250366] TCP reno registered
[ 0.250371] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.250385] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.250480] NET: Registered protocol family 1
[ 0.250499] pci 0000:00:02.0: Boot video device
[ 0.250745] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.250805] Unpacking initramfs...
[ 0.595921] Freeing initrd memory: 9952k freed
[ 0.601771] Simple Boot Flag at 0x35 set to 0x1
[ 0.602099] audit: initializing netlink socket (disabled)
[ 0.602116] type=2000 audit(1274612550.600:1): initialized
[ 0.602380] highmem bounce pool size: 64 pages
[ 0.602386] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.603993] VFS: Disk quotas dquot_6.5.2
[ 0.604053] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.604160] msgmni has been set to 1732
[ 0.604413] alg: No test for stdrng (krng)
[ 0.604480] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.604484] io scheduler noop registered
[ 0.604486] io scheduler deadline registered
[ 0.604527] io scheduler cfq registered (default)
[ 0.604625] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.604682] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.604784] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.604834] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.604933] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.604983] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.605079] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.605129] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.605332] isapnp: Scanning for PnP cards...
[ 0.959580] isapnp: No Plug & Play device found
[ 0.960813] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.960964] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.961313] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.968844] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.968851] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.968905] mice: PS/2 mouse device common for all mice
[ 0.968958] rtc_cmos 00:07: RTC can wake from S4
[ 0.968991] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.969029] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.969040] cpuidle: using governor ladder
[ 0.969042] cpuidle: using governor menu
[ 0.969047] No iBFT detected.
[ 0.969314] TCP cubic registered
[ 0.969451] NET: Registered protocol family 10
[ 0.969832] lo: Disabled Privacy Extensions
[ 0.970083] Mobile IPv6
[ 0.970086] NET: Registered protocol family 17
[ 0.970101] Using IPI No-Shortcut mode
[ 0.970160] registered taskstats version 1
[ 0.970675] rtc_cmos 00:07: setting system clock to 2010-05-23 11:02:31 UTC (1274612551)
[ 0.970770] Freeing unused kernel memory: 380k freed
[ 0.971004] Write protecting the kernel text: 2416k
[ 0.971029] Write protecting the kernel read-only data: 868k
[ 0.973464] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.192096] usbcore: registered new interface driver usbfs
[ 1.192244] usbcore: registered new interface driver hub
[ 1.192285] usbcore: registered new device driver usb
[ 1.217016] Uniform Multi-Platform E-IDE driver
[ 1.226312] SCSI subsystem initialized
[ 1.231992] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
[ 1.231995] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 1.232093] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.232120] e1000e 0000:02:00.0: setting latency timer to 64
[ 1.232308] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.232801] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 1.234327] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.234337] ACPI: Thermal Zone [THM0] (55 C)
[ 1.236322] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.236332] ACPI: Thermal Zone [THM1] (57 C)
[ 1.238286] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.238352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.238355] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 1.238518] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.238747] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.238756] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.238767] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.238772] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.238801] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.238848] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 1.238894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.238897] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.238900] usb usb1: Product: UHCI Host Controller
[ 1.238903] usb usb1: Manufacturer: Linux 2.6.34 uhci_hcd
[ 1.238906] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.239104] hub 1-0:1.0: USB hub found
[ 1.239109] hub 1-0:1.0: 2 ports detected
[ 1.239189] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.239196] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.239200] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.239208] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.239246] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 1.239281] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.239284] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.239287] usb usb2: Product: UHCI Host Controller
[ 1.239290] usb usb2: Manufacturer: Linux 2.6.34 uhci_hcd
[ 1.239293] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.239442] hub 2-0:1.0: USB hub found
[ 1.239447] hub 2-0:1.0: 2 ports detected
[ 1.239732] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 1.239913] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 1.239921] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.239928] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.239932] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.239941] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.239981] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.240031] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.240034] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240037] usb usb3: Product: UHCI Host Controller
[ 1.240039] usb usb3: Manufacturer: Linux 2.6.34 uhci_hcd
[ 1.240042] usb usb3: SerialNumber: 0000:00:1d.2
[ 1.240190] hub 3-0:1.0: USB hub found
[ 1.240195] hub 3-0:1.0: 2 ports detected
[ 1.240263] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.240270] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.240274] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.240281] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 1.240319] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 1.240354] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.240357] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240360] usb usb4: Product: UHCI Host Controller
[ 1.240363] usb usb4: Manufacturer: Linux 2.6.34 uhci_hcd
[ 1.240366] usb usb4: SerialNumber: 0000:00:1d.3
[ 1.240511] hub 4-0:1.0: USB hub found
[ 1.240516] hub 4-0:1.0: 2 ports detected
[ 1.248257] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.248443] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.248452] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.248466] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.248470] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.248482] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 1.248501] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.248514] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.252411] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.252417] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
[ 1.262096] libata version 3.00 loaded.
[ 1.268082] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.268110] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.268113] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.268116] usb usb5: Product: EHCI Host Controller
[ 1.268119] usb usb5: Manufacturer: Linux 2.6.34 ehci_hcd
[ 1.268122] usb usb5: SerialNumber: 0000:00:1d.7
[ 1.268223] hub 5-0:1.0: USB hub found
[ 1.268229] hub 5-0:1.0: 8 ports detected
[ 1.271572] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 1.271586] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 1.271600] piix 0000:00:1f.1: IDE port disabled
[ 1.271610] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.271617] ide0: BM-DMA at 0x1810-0x1817
[ 1.271624] Probing IDE interface ide0...
[ 1.365394] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:00:00:f0:1d:00
[ 1.365399] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.365537] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 2.004357] hda: HL-DT-STCD-RW/DVD DRIVE GCC-4247N, ATAPI CD/DVD-ROM drive
[ 2.340058] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.341033] hda: UDMA/33 mode selected
[ 2.342048] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.343876] ahci 0000:00:1f.2: version 3.0
[ 2.343894] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.343947] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.344033] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 2.344038] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.344045] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.344166] scsi0 : ahci
[ 2.344289] scsi1 : ahci
[ 2.344350] scsi2 : ahci
[ 2.344409] scsi3 : ahci
[ 2.344513] ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 45
[ 2.344516] ata2: DUMMY
[ 2.344517] ata3: DUMMY
[ 2.344519] ata4: DUMMY
[ 2.720030] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.213894] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3.213900] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3.213904] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.215040] ata1.00: ATA-7: SAMSUNG MMCRE64G5MXP-0VB, VBM1801Q, max UDMA/100
[ 3.215044] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.215421] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3.215426] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3.215430] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.216522] ata1.00: configured for UDMA/100
[ 3.234256] ata1.00: configured for UDMA/100
[ 3.234260] ata1: EH complete
[ 3.234378] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCRE64G VBM1 PQ: 0 ANSI: 5
[ 3.245536] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 3.245602] sd 0:0:0:0: [sda] Write Protect is off
[ 3.245605] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.245633] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.245792] sda: sda1 sda2
[ 3.246672] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.256161] ide-cd driver 5.00
[ 3.258307] ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 3.258313] Uniform CD-ROM driver Revision: 3.20
[ 3.329452] device-mapper: uevent: version 1.0.3
[ 3.329605] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[ 3.616643] udev: starting version 154
[ 3.781568] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.782300] intel_rng: FWH not detected
[ 3.782917] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.783192] Linux agpgart interface v0.103
[ 3.790168] ACPI: Lid Switch [LID]
[ 3.790249] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 3.790291] ACPI: Sleep Button [SLPB]
[ 3.790480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.790504] ACPI: Power Button [PWRF]
[ 3.794675] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.875423] Non-volatile memory driver v1.3
[ 3.890709] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 3.891734] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 3.896073] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.897064] cfg80211: Calling CRDA to update world regulatory domain
[ 3.899578] acpi device:01: registered as cooling_device2
[ 3.900098] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.900137] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.908737] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[ 3.908763] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[ 3.908766] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
[ 3.908773] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
[ 3.930093] NET: Registered protocol family 23
[ 3.936785] ACPI: Battery Slot [BAT0] (battery present)
[ 3.941520] udev: renamed network interface eth0 to eth1
[ 3.942569] ACPI: AC Adapter [AC] (on-line)
[ 3.975274] nsc-ircc, chip->init
[ 3.975290] nsc-ircc, Found chip at base=0x164e
[ 3.975349] nsc-ircc, driver loaded (Dag Brattli)
[ 3.975372] nsc_ircc_open(), can't get iobase of 0x2f8
[ 3.975418] nsc-ircc, Found chip at base=0x164e
[ 3.975458] nsc-ircc, driver loaded (Dag Brattli)
[ 3.975462] nsc_ircc_open(), can't get iobase of 0x2f8
[ 3.975827] nsc-ircc 00:0a: disabled
[ 3.976376] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 3.976378] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.976381] thinkpad_acpi: ThinkPad BIOS 79ETE6WW (2.26 ), EC 79HT50WW-1.07
[ 3.976383] thinkpad_acpi: Lenovo ThinkPad T60, model 1952WUV
[ 3.976726] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 3.977032] thinkpad_acpi: radio switch found; radios are enabled
[ 3.977049] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.977052] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.983553] Registered led device: tpacpi::thinklight
[ 3.983580] Registered led device: tpacpi::power
[ 3.983607] Registered led device: tpacpi::standby
[ 3.983624] Registered led device: tpacpi::thinkvantage
[ 4.004880] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 4.004964] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.011589] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 4.055206] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 4.055209] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 4.055321] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.055336] iwl3945 0000:03:00.0: setting latency timer to 64
[ 4.109371] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 4.109375] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 4.114222] iwl3945 0000:03:00.0: irq 46 for MSI/MSI-X
[ 4.142673] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 4.142678] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[ 4.142686] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x9000-0xcfff]
[ 4.142690] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x9000-0xcfff: excluding 0x9000-0x90ff 0x9400-0x94ff
[ 4.190459] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
[ 4.190464] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff
[ 4.190479] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 4.190483] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff
[ 4.193698] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 4.247864] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.247869] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 4.247929] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4.247969] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.252453] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 4.254618] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 4.255542] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 4.256337] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 4.258050] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 4.258116] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 4.258181] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 4.258248] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 4.292245] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.438385] Adding 2104476k swap on /dev/sda1. Priority:-1 extents:1 across:2104476k SS
[ 4.559922] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
[ 4.559928] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 4.603227] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 4.646998] loop: module loaded
[ 5.130591] fuse init (API version 7.13)
[ 5.170148] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[ 5.233931] apm: BIOS not found.
[ 5.641414] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 5.697218] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
[ 5.697817] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5.727288] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 5.869395] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.885795] Bluetooth: Core ver 2.15
[ 5.885824] NET: Registered protocol family 31
[ 5.885826] Bluetooth: HCI device and connection manager initialized
[ 5.885830] Bluetooth: HCI socket layer initialized
[ 5.921031] Bluetooth: L2CAP ver 2.14
[ 5.921035] Bluetooth: L2CAP socket layer initialized
[ 5.925674] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.925677] Bluetooth: BNEP filters: protocol multicast
[ 5.989578] Bridge firewalling registered
[ 6.030989] Bluetooth: SCO (Voice Link) ver 0.6
[ 6.030992] Bluetooth: SCO socket layer initialized
[ 6.053164] Bluetooth: RFCOMM TTY layer initialized
[ 6.053170] Bluetooth: RFCOMM socket layer initialized
[ 6.053172] Bluetooth: RFCOMM ver 1.11
[ 6.370959] ttyS1: LSR safety check engaged!
[ 6.522441] lp: driver loaded but no devices found
[ 6.553105] ppdev: user-space parallel port driver
[ 6.821371] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input10
[ 7.131594] [drm] Initialized drm 1.1.0 20060810
[ 7.164311] i915 0000:00:02.0: power state changed by ACPI to D0
[ 7.164358] i915 0000:00:02.0: power state changed by ACPI to D0
[ 7.164368] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.164377] i915 0000:00:02.0: setting latency timer to 64
[ 7.169168] [drm] set up 7M of stolen space
[ 7.626500] [drm] initialized overlay support
[ 8.103765] Console: switching to colour frame buffer device 128x48
[ 8.103773] fb0: inteldrmfb frame buffer device
[ 8.103776] drm: registered panic notifier
[ 8.103779] Slow work thread pool: Starting up
[ 8.103838] Slow work thread pool: Ready
[ 8.103846] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.881762] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 11.113297] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
[ 14.901816] wlan0: Selected IBSS BSSID 06:be:a1:c9:16:c0 based on configured SSID
[ 16.231904] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 16.231914] IP: [<f8309788>] iwl3945_request_scan+0x39a/0x50b [iwl3945]
[ 16.231927] *pde = 00000000
[ 16.231930] Oops: 0000 [#1] SMP
[ 16.231934] last sysfs file: /sys/devices/system/cpu/cpu1/cpufreq/scaling_cur_freq
[ 16.231938] Modules linked in: i915 drm_kms_helper drm i2c_algo_bit ppdev lp parport sco rfcomm bridge stp bnep l2cap crc16 bluetooth acpi_cpufreq mperf cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_powersave uinput fuse loop joydev dm_crypt snd_hda_codec_analog snd_hda_intel pcmcia snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss arc4 snd_pcm ecb snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq iwl3945 snd_timer iwlcore snd_seq_device thinkpad_acpi mac80211 led_class irda tpm_tis yenta_socket crc_ccitt snd tpm nvram ac battery video tpm_bios intel_agp output pcmcia_rsrc cfg80211 i2c_i801 psmouse pcmcia_core serio_raw evdev pcspkr button rng_core agpgart soundcore processor i2c_core rfkill snd_page_alloc ext2 mbcache dm_mod ide_cd_mod cdrom ata_generic sd_mod crc_t10dif ata_piix ide_pci_generic ahci libahci piix libata uhci_hcd ehci_hcd e1000e thermal thermal_sys scsi_mod ide_core usbcore nls_base [last unloaded: scsi_wait_scan]
[ 16.232007]
[ 16.232007] Pid: 672, comm: iwl3945 Not tainted 2.6.34 #1 1952WUV/1952WUV
[ 16.232007] EIP: 0060:[<f8309788>] EFLAGS: 00010283 CPU: 0
[ 16.232007] EIP is at iwl3945_request_scan+0x39a/0x50b [iwl3945]
[ 16.232007] EAX: f6852000 EBX: f6b90ae0 ECX: 00000000 EDX: 00000000
[ 16.232007] ESI: f65270f2 EDI: 00000000 EBP: 00000000 ESP: f6aa7f10
[ 16.232007] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 16.232007] Process iwl3945 (pid: 672, ti=f6aa6000 task=f6911450 task.ti=f6aa6000)
[ 16.232007] Stack:
[ 16.232007] 00000058 f6252000 c102a78d 00000001 00000000 00000000 00807fc0 f6250001
[ 16.232007] <0> c1259683 76d34243 00000003 00214198 005700ff f6527000 00000000 00000000
[ 16.232007] <0> 00000000 00000001 008000d8 f6b90ae0 f6b91058 f6b96718 f6b96718 f82a4889
[ 16.232007] Call Trace:
[ 16.232007] [<c102a78d>] ? finish_task_switch+0x2e/0x91
[ 16.232007] [<c1259683>] ? schedule+0x48c/0x4dc
[ 16.232007] [<f82a4889>] ? iwl_bg_start_internal_scan+0x78/0x93 [iwlcore]
[ 16.232007] [<c1040b5e>] ? worker_thread+0x142/0x1c2
[ 16.232007] [<f82a4811>] ? iwl_bg_start_internal_scan+0x0/0x93 [iwlcore]
[ 16.232007] [<c104396e>] ? autoremove_wake_function+0x0/0x29
[ 16.232007] [<c1040a1c>] ? worker_thread+0x0/0x1c2
[ 16.232007] [<c1043633>] ? kthread+0x5f/0x64
[ 16.232007] [<c10435d4>] ? kthread+0x0/0x64
[ 16.232007] [<c10034be>] ? kernel_thread_helper+0x6/0x10
[ 16.232007] Code: 00 00 00 b8 01 00 00 00 d3 e0 88 44 24 1c 83 e8 02 88 44 24 30 8b 04 24 48 66 89 44 24 32 e9 c9 00 00 00 8b 54 24 14 8b 6c 90 20 <39> 7d 00 0f 85 b4 00 00 00 66 8b 4d 06 89 fa 89 d8 88 4e 01 0f
[ 16.232007] EIP: [<f8309788>] iwl3945_request_scan+0x39a/0x50b [iwl3945] SS:ESP 0068:f6aa7f10
[ 16.232007] CR2: 0000000000000000
[ 16.232203] ---[ end trace ec53fd3c9aa994a4 ]---
[ 25.356030] wlan0: no IPv6 routers present
On Mon, May 24, 2010 at 10:24:17AM +0200, Johannes Berg wrote:
> Do I even want to comment on that? In any case -- it's not supposed to
> be spamming you so we want to find the root cause. Can you enable
> verbose IBSS debug to hopefully see why it's happening?
With debug logging the problem seems to go away, I will try the timer
patch next:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34 (root@totoro) (gcc version 4.4.4 (Debian 4.4.4-2) ) #3 SMP Mon May 24 16:43:52 EEST 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] found SMP MP-table at [c00f6810] f6810
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 3764f000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 00100000 - 00aa0ee3
[ 0.000000] Move RAMDISK from 000000003764f000 - 0000000037fefee2 to 00100000 - 00aa0ee2
[ 0.000000] ACPI: RSDP 000f67e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 7f6d14a0 00084 (v01 LENOVO TP-79 00002260 LTP 00000000)
[ 0.000000] ACPI: FACP 7f6d1600 000F4 (v03 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100121/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20100121/tbfadt-557)
[ 0.000000] ACPI: DSDT 7f6d195e 0D467 (v01 LENOVO TP-79 00002260 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7f6f4000 00040
[ 0.000000] ACPI: SSDT 7f6d17b4 001AA (v01 LENOVO TP-79 00002260 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 7f6dedc5 00052 (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: TCPA 7f6dee17 00032 (v02 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: APIC 7f6dee49 00068 (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: MCFG 7f6deeb1 0003C (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: HPET 7f6deeed 00038 (v01 LENOVO TP-79 00002260 LNVO 00000001)
[ 0.000000] ACPI: BOOT 7f6defd8 00028 (v01 LENOVO TP-79 00002260 LTP 00000001)
[ 0.000000] ACPI: SSDT 7f6f2655 0025F (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: SSDT 7f6f28b4 000A6 (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: SSDT 7f6f295a 004F7 (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: SSDT 7f6f2e51 001D8 (v01 LENOVO TP-79 00002260 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f6d0
[ 0.000000] On node 0 totalpages: 521838
[ 0.000000] free_area_init_node: node 0, pgdat c137e500, node_mem_map c14a0020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3966 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292308 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [8000 - 87ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s33876 r0 d23468 u2097152
[ 0.000000] pcpu-alloc: s33876 r0 d23468 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517760
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34 root=UUID=08c11915-82f3-463a-9e61-b66b56205bdf ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Subtract (52 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001497bc4] TEXT DATA BSS
[ 0.000000] #3 [0001498000 - 000149e138] BRK
[ 0.000000] #4 [00000f6820 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f6810 - 00000f6820] MP-table mpf
[ 0.000000] #6 [000009f000 - 000009f5a1] BIOS reserved
[ 0.000000] #7 [000009f6b5 - 00000f6810] BIOS reserved
[ 0.000000] #8 [000009f5a1 - 000009f6b5] MP-table mpc
[ 0.000000] #9 [0000002000 - 0000003000] TRAMPOLINE
[ 0.000000] #10 [0000003000 - 0000007000] ACPI WAKEUP
[ 0.000000] #11 [0000007000 - 0000008000] PGTABLE
[ 0.000000] #12 [0000100000 - 0000aa1000] NEW RAMDISK
[ 0.000000] #13 [000149f000 - 00014a0000] BOOTMEM
[ 0.000000] #14 [00014a0000 - 0002490000] BOOTMEM
[ 0.000000] #15 [0001497c00 - 0001497c04] BOOTMEM
[ 0.000000] #16 [0001497c40 - 0001497d00] BOOTMEM
[ 0.000000] #17 [0001497d00 - 0001497d54] BOOTMEM
[ 0.000000] #18 [0002490000 - 0002493000] BOOTMEM
[ 0.000000] #19 [0001497d80 - 0001497dec] BOOTMEM
[ 0.000000] #20 [0002493000 - 0002499000] BOOTMEM
[ 0.000000] #21 [0001497e00 - 0001497e25] BOOTMEM
[ 0.000000] #22 [0001497e40 - 0001497e67] BOOTMEM
[ 0.000000] #23 [000149e140 - 000149e2e4] BOOTMEM
[ 0.000000] #24 [0001497e80 - 0001497ec0] BOOTMEM
[ 0.000000] #25 [0001497ec0 - 0001497f00] BOOTMEM
[ 0.000000] #26 [0001497f00 - 0001497f40] BOOTMEM
[ 0.000000] #27 [0001497f40 - 0001497f80] BOOTMEM
[ 0.000000] #28 [0001497f80 - 0001497fc0] BOOTMEM
[ 0.000000] #29 [0001497fc0 - 0001498000] BOOTMEM
[ 0.000000] #30 [000149e300 - 000149e340] BOOTMEM
[ 0.000000] #31 [000149e340 - 000149e380] BOOTMEM
[ 0.000000] #32 [000149e380 - 000149e3c0] BOOTMEM
[ 0.000000] #33 [000149e3c0 - 000149e400] BOOTMEM
[ 0.000000] #34 [000149e400 - 000149e440] BOOTMEM
[ 0.000000] #35 [000149e440 - 000149e480] BOOTMEM
[ 0.000000] #36 [000149e480 - 000149e4c0] BOOTMEM
[ 0.000000] #37 [000149e4c0 - 000149e500] BOOTMEM
[ 0.000000] #38 [000149e500 - 000149e510] BOOTMEM
[ 0.000000] #39 [000149e540 - 000149e598] BOOTMEM
[ 0.000000] #40 [000149e5c0 - 000149e618] BOOTMEM
[ 0.000000] #41 [0002800000 - 000280e000] BOOTMEM
[ 0.000000] #42 [0002a00000 - 0002a0e000] BOOTMEM
[ 0.000000] #43 [000149e640 - 000149e644] BOOTMEM
[ 0.000000] #44 [000149e680 - 000149e684] BOOTMEM
[ 0.000000] #45 [000149e6c0 - 000149e6c8] BOOTMEM
[ 0.000000] #46 [000149e700 - 000149e708] BOOTMEM
[ 0.000000] #47 [000149e740 - 000149e7e8] BOOTMEM
[ 0.000000] #48 [000149e800 - 000149e868] BOOTMEM
[ 0.000000] #49 [0002499000 - 000249d000] BOOTMEM
[ 0.000000] #50 [000249d000 - 000251d000] BOOTMEM
[ 0.000000] #51 [000251d000 - 000255d000] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0)
[ 0.000000] Memory: 2055476k/2087744k available (2386k kernel code, 31876k reserved, 1222k data, 376k init, 1178440k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1387000 - 0xc13e5000 ( 376 kB)
[ 0.000000] .data : 0xc1254a7b - 0xc1386558 (1222 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1254a7b (2386 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 1828.737 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.47 BogoMIPS (lpj=7314948)
[ 0.008030] Security Framework initialized
[ 0.008037] SELinux: Disabled at boot.
[ 0.008046] Mount-cache hash table entries: 512
[ 0.008187] Initializing cgroup subsys ns
[ 0.008191] Initializing cgroup subsys cpuacct
[ 0.008196] Initializing cgroup subsys devices
[ 0.008199] Initializing cgroup subsys freezer
[ 0.008201] Initializing cgroup subsys net_cls
[ 0.008229] CPU: Physical Processor ID: 0
[ 0.008230] CPU: Processor Core ID: 0
[ 0.008234] mce: CPU supports 6 MCE banks
[ 0.008245] CPU0: Thermal monitoring enabled (TM2)
[ 0.008249] using mwait in idle threads.
[ 0.008257] Performance Events: Core events, core PMU driver.
[ 0.008264] ... version: 1
[ 0.008266] ... bit width: 40
[ 0.008268] ... generic registers: 2
[ 0.008270] ... value mask: 000000ffffffffff
[ 0.008273] ... max period: 000000007fffffff
[ 0.008275] ... fixed-purpose events: 0
[ 0.008277] ... event mask: 0000000000000003
[ 0.008281] Checking 'hlt' instruction... OK.
[ 0.025101] ACPI: Core revision 20100121
[ 0.052057] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.052464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093711] CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 0.096000] Booting Node 0, Processors #1 Ok.
[ 0.012000] Initializing CPU#1
[ 0.184000] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.184000] Measured 521642 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.184000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.184017] Brought up 2 CPUs
[ 0.184020] Total of 2 processors activated (7315.07 BogoMIPS).
[ 0.184623] regulator: core version 0.5
[ 0.184623] NET: Registered protocol family 16
[ 0.184623] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.184623] ACPI: bus type pci registered
[ 0.184623] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.184623] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.184623] PCI: Using MMCONFIG for extended config space
[ 0.184623] PCI: Using configuration type 1 for base access
[ 0.184623] bio: create slab <bio-0> at 0
[ 0.188019] ACPI: EC: EC description table is found, configuring boot EC
[ 0.201464] ACPI: SSDT 7f6f1d36 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.202360] ACPI: SSDT 7f6f1ffb 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.203372] ACPI: SSDT 7f6f1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.204069] ACPI: SSDT 7f6f1f76 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.204693] ACPI: Interpreter enabled
[ 0.204704] ACPI: (supports S0 S3 S4 S5)
[ 0.204729] ACPI: Using IOAPIC for interrupt routing
[ 0.213492] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.213541] ACPI: Power Resource [PUBS] (on)
[ 0.217416] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.217420] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.217883] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.217934] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.217938] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.217941] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.217945] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.217948] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.217951] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.217955] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.218019] pci 0000:00:02.0: reg 10: [mem 0xee100000-0xee17ffff]
[ 0.218025] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.218030] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.218035] pci 0000:00:02.0: reg 1c: [mem 0xee200000-0xee23ffff]
[ 0.218072] pci 0000:00:02.1: reg 10: [mem 0xee180000-0xee1fffff]
[ 0.218177] pci 0000:00:1b.0: reg 10: [mem 0xee240000-0xee243fff 64bit]
[ 0.218237] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.218243] pci 0000:00:1b.0: PME# disabled
[ 0.218338] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.218344] pci 0000:00:1c.0: PME# disabled
[ 0.218442] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.218447] pci 0000:00:1c.1: PME# disabled
[ 0.218546] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.218551] pci 0000:00:1c.2: PME# disabled
[ 0.218649] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.218655] pci 0000:00:1c.3: PME# disabled
[ 0.218718] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.218780] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.218842] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.218904] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.218963] pci 0000:00:1d.7: reg 10: [mem 0xee444000-0xee4443ff]
[ 0.219025] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.219031] pci 0000:00:1d.7: PME# disabled
[ 0.219193] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.219198] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.219203] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.219208] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.219213] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.219266] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.219274] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.219282] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.219290] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.219298] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.219355] pci 0000:00:1f.2: reg 10: [io 0x18d0-0x18d7]
[ 0.219363] pci 0000:00:1f.2: reg 14: [io 0x18c4-0x18c7]
[ 0.219371] pci 0000:00:1f.2: reg 18: [io 0x18c8-0x18cf]
[ 0.219379] pci 0000:00:1f.2: reg 1c: [io 0x18c0-0x18c3]
[ 0.219387] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.219395] pci 0000:00:1f.2: reg 24: [mem 0xee444400-0xee4447ff]
[ 0.219432] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.219437] pci 0000:00:1f.2: PME# disabled
[ 0.219500] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.219704] pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff]
[ 0.219729] pci 0000:02:00.0: reg 18: [io 0x2000-0x201f]
[ 0.219836] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.219844] pci 0000:02:00.0: PME# disabled
[ 0.219879] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.219885] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.220003] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.220012] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.220209] pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff]
[ 0.220451] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.220464] pci 0000:03:00.0: PME# disabled
[ 0.220529] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.220534] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.220540] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.220549] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.220609] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.220614] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.220620] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.220628] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.220688] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.220694] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff]
[ 0.220699] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.220708] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.220776] pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff]
[ 0.220806] pci 0000:15:00.0: supports D1 D2
[ 0.220808] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220815] pci 0000:15:00.0: PME# disabled
[ 0.220885] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.220890] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff]
[ 0.220896] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.220905] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.220908] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.220911] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.220914] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.220918] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.220921] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.220924] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.220928] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.221014] pci_bus 0000:00: on NUMA node 0
[ 0.221019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.221173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.221253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.221332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.221418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.221504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.227018] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227230] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227439] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227649] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.227857] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.228078] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.228286] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.228497] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.228618] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.228631] vgaarb: loaded
[ 0.228659] PCI: Using ACPI for IRQ routing
[ 0.228659] PCI: pci_cache_line_size set to 64 bytes
[ 0.228659] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.228659] reserve RAM buffer: 000000007f6d0000 - 000000007fffffff
[ 0.228659] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.228659] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.228659] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.232017] Switching to clocksource hpet
[ 0.233496] pnp: PnP ACPI init
[ 0.233505] ACPI: bus type pnp registered
[ 0.237785] pnp: PnP ACPI: found 11 devices
[ 0.237787] ACPI: ACPI bus type pnp unregistered
[ 0.237791] PnPBIOS: Disabled by ACPI PNP
[ 0.237803] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.237807] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.237811] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.237814] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.237817] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.237821] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.237825] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.237828] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.237832] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.237835] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.237839] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.237843] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.237846] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.237854] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.237857] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.237861] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.237864] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.237868] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.237871] system 00:02: [io 0x1600-0x165f] could not be reserved
[ 0.237875] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.237879] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.237882] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.237886] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.237889] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.237893] system 00:02: [mem 0xfed40000-0xfed40fff] has been reserved
[ 0.272658] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.272662] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.272667] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.272674] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.272679] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.272688] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.272692] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.272699] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.272705] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.272713] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.272717] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.272724] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.272730] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.272738] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.272742] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff]
[ 0.272749] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.272755] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.272764] pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
[ 0.272769] pci 0000:15:00.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[ 0.272772] pci 0000:15:00.0: BAR 13: assigned [io 0x9000-0x90ff]
[ 0.272775] pci 0000:15:00.0: BAR 14: assigned [io 0x9400-0x94ff]
[ 0.272778] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.272781] pci 0000:15:00.0: bridge window [io 0x9000-0x90ff]
[ 0.272787] pci 0000:15:00.0: bridge window [io 0x9400-0x94ff]
[ 0.272794] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
[ 0.272800] pci 0000:15:00.0: bridge window [mem 0x84000000-0x87ffffff]
[ 0.272807] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.272811] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff]
[ 0.272818] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.272823] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.272844] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.272850] pci 0000:00:1c.0: setting latency timer to 64
[ 0.272862] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.272867] pci 0000:00:1c.1: setting latency timer to 64
[ 0.272878] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.272884] pci 0000:00:1c.2: setting latency timer to 64
[ 0.272897] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.272902] pci 0000:00:1c.3: setting latency timer to 64
[ 0.272908] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.272915] pci 0000:00:1e.0: setting latency timer to 64
[ 0.272928] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.272936] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.272939] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.272941] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.272944] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.272947] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.272950] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.272953] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.272956] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.272959] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
[ 0.272962] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.272965] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff]
[ 0.272968] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
[ 0.272971] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.272975] pci_bus 0000:04: resource 0 [io 0x5000-0x6fff]
[ 0.272978] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.272981] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.272984] pci_bus 0000:0c: resource 0 [io 0x7000-0x8fff]
[ 0.272987] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
[ 0.272990] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.272993] pci_bus 0000:15: resource 0 [io 0x9000-0xcfff]
[ 0.272996] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
[ 0.272999] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.273002] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.273005] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.273008] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.273011] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.273014] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.273016] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.273019] pci_bus 0000:15: resource 10 [mem 0x80000000-0xfebfffff]
[ 0.273022] pci_bus 0000:16: resource 0 [io 0x9000-0x90ff]
[ 0.273025] pci_bus 0000:16: resource 1 [io 0x9400-0x94ff]
[ 0.273028] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
[ 0.273031] pci_bus 0000:16: resource 3 [mem 0x84000000-0x87ffffff]
[ 0.273058] NET: Registered protocol family 2
[ 0.273111] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.273346] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.274044] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.274392] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.274395] TCP reno registered
[ 0.274398] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.274413] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.274514] NET: Registered protocol family 1
[ 0.274533] pci 0000:00:02.0: Boot video device
[ 0.274776] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.274834] Unpacking initramfs...
[ 0.616253] Freeing initrd memory: 9860k freed
[ 0.622042] Simple Boot Flag at 0x35 set to 0x1
[ 0.622370] audit: initializing netlink socket (disabled)
[ 0.622387] type=2000 audit(1274709152.620:1): initialized
[ 0.622646] highmem bounce pool size: 64 pages
[ 0.622651] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.624271] VFS: Disk quotas dquot_6.5.2
[ 0.624326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.624425] msgmni has been set to 1732
[ 0.624667] alg: No test for stdrng (krng)
[ 0.624729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.624733] io scheduler noop registered
[ 0.624735] io scheduler deadline registered
[ 0.624778] io scheduler cfq registered (default)
[ 0.624879] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.624936] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.625041] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.625092] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.625189] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.625239] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.625339] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.625389] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.625586] isapnp: Scanning for PnP cards...
[ 0.980147] isapnp: No Plug & Play device found
[ 0.981366] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.981515] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.981853] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.990262] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.990269] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.990321] mice: PS/2 mouse device common for all mice
[ 0.990374] rtc_cmos 00:07: RTC can wake from S4
[ 0.990405] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.990438] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.990449] cpuidle: using governor ladder
[ 0.990452] cpuidle: using governor menu
[ 0.990456] No iBFT detected.
[ 0.990714] TCP cubic registered
[ 0.990887] NET: Registered protocol family 10
[ 0.991270] lo: Disabled Privacy Extensions
[ 0.991534] Mobile IPv6
[ 0.991537] NET: Registered protocol family 17
[ 0.991550] Using IPI No-Shortcut mode
[ 0.991608] registered taskstats version 1
[ 0.992131] rtc_cmos 00:07: setting system clock to 2010-05-24 13:52:33 UTC (1274709153)
[ 0.992235] Freeing unused kernel memory: 376k freed
[ 0.992465] Write protecting the kernel text: 2388k
[ 0.992489] Write protecting the kernel read-only data: 848k
[ 0.995689] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.217359] usbcore: registered new interface driver usbfs
[ 1.217510] usbcore: registered new interface driver hub
[ 1.217559] usbcore: registered new device driver usb
[ 1.239876] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.239879] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 1.239984] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.240012] e1000e 0000:02:00.0: setting latency timer to 64
[ 1.240201] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 1.240693] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 1.242020] SCSI subsystem initialized
[ 1.242920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.243182] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.243376] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.243387] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.243400] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.243404] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.243425] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.243446] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.243458] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.247329] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.247498] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
[ 1.276016] Uniform Multi-Platform E-IDE driver
[ 1.280082] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.280109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.280112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.280115] usb usb1: Product: EHCI Host Controller
[ 1.280117] usb usb1: Manufacturer: Linux 2.6.34 ehci_hcd
[ 1.280120] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.280220] hub 1-0:1.0: USB hub found
[ 1.280225] hub 1-0:1.0: 8 ports detected
[ 1.283706] libata version 3.00 loaded.
[ 1.285983] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 1.285995] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 1.286008] piix 0000:00:1f.1: IDE port disabled
[ 1.286017] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.286023] ide0: BM-DMA at 0x1810-0x1817
[ 1.286032] Probing IDE interface ide0...
[ 1.293485] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.294968] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.294978] ACPI: Thermal Zone [THM0] (50 C)
[ 1.296465] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.296474] ACPI: Thermal Zone [THM1] (53 C)
[ 1.377411] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:f0:02:0f:1d:00
[ 1.377414] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.377553] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 2.020361] hda: HL-DT-STCD-RW/DVD DRIVE GCC-4247N, ATAPI CD/DVD-ROM drive
[ 2.356053] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.357041] hda: UDMA/33 mode selected
[ 2.358054] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.360101] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.360286] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.360294] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.360304] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.360308] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.360322] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.360360] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 2.360403] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.360406] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.360409] usb usb2: Product: UHCI Host Controller
[ 2.360411] usb usb2: Manufacturer: Linux 2.6.34 uhci_hcd
[ 2.360414] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.360510] hub 2-0:1.0: USB hub found
[ 2.360515] hub 2-0:1.0: 2 ports detected
[ 2.360593] ahci 0000:00:1f.2: version 3.0
[ 2.360607] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.360657] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 2.360727] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 2.360732] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.360738] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.360863] scsi0 : ahci
[ 2.361028] scsi1 : ahci
[ 2.361138] scsi2 : ahci
[ 2.361280] scsi3 : ahci
[ 2.361387] ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 29
[ 2.361390] ata2: DUMMY
[ 2.361392] ata3: DUMMY
[ 2.361394] ata4: DUMMY
[ 2.361507] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.361517] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.361521] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.361532] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.361571] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 2.361612] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.361616] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.361619] usb usb3: Product: UHCI Host Controller
[ 2.361621] usb usb3: Manufacturer: Linux 2.6.34 uhci_hcd
[ 2.361624] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.361716] hub 3-0:1.0: USB hub found
[ 2.361721] hub 3-0:1.0: 2 ports detected
[ 2.362035] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 2.362207] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 2.362215] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.362223] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.362227] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.362236] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.362272] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 2.362309] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.362312] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.362315] usb usb4: Product: UHCI Host Controller
[ 2.362317] usb usb4: Manufacturer: Linux 2.6.34 uhci_hcd
[ 2.362320] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.362397] hub 4-0:1.0: USB hub found
[ 2.362401] hub 4-0:1.0: 2 ports detected
[ 2.362463] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.362469] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.362473] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.362481] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.362509] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 2.362543] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.362546] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.362549] usb usb5: Product: UHCI Host Controller
[ 2.362551] usb usb5: Manufacturer: Linux 2.6.34 uhci_hcd
[ 2.362554] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.362629] hub 5-0:1.0: USB hub found
[ 2.362633] hub 5-0:1.0: 2 ports detected
[ 2.680034] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.681072] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.681077] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.681082] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.682214] ata1.00: ATA-7: SAMSUNG MMCRE64G5MXP-0VB, VBM1801Q, max UDMA/100
[ 2.682218] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.682620] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.682624] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.682629] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.683753] ata1.00: configured for UDMA/100
[ 2.700630] ata1.00: configured for UDMA/100
[ 2.700634] ata1: EH complete
[ 2.700746] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCRE64G VBM1 PQ: 0 ANSI: 5
[ 2.714878] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.714940] sd 0:0:0:0: [sda] Write Protect is off
[ 2.714944] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.714971] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.715118] sda: sda1 sda2
[ 2.716190] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.719538] ide-cd driver 5.00
[ 2.721663] ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 2.721669] Uniform CD-ROM driver Revision: 3.20
[ 2.845391] device-mapper: uevent: version 1.0.3
[ 2.845529] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
[ 3.157765] udev: starting version 154
[ 3.357084] Linux agpgart interface v0.103
[ 3.360641] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.362495] ACPI: Lid Switch [LID]
[ 3.362563] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 3.362570] ACPI: Sleep Button [SLPB]
[ 3.363499] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.365418] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.365426] ACPI: Power Button [PWRF]
[ 3.389762] intel_rng: FWH not detected
[ 3.391725] ACPI: AC Adapter [AC] (on-line)
[ 3.411929] acpi device:01: registered as cooling_device2
[ 3.412672] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.412838] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.413394] cfg80211: Calling CRDA to update world regulatory domain
[ 3.425714] Non-volatile memory driver v1.3
[ 3.426338] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 3.427456] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 3.432072] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.432366] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[ 3.432409] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[ 3.432412] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
[ 3.432420] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
[ 3.432819] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.443382] ACPI: Battery Slot [BAT0] (battery present)
[ 3.445671] udev: renamed network interface eth0 to eth2
[ 3.496913] NET: Registered protocol family 23
[ 3.532450] nsc-ircc, chip->init
[ 3.532464] nsc-ircc, Found chip at base=0x164e
[ 3.532502] nsc-ircc, driver loaded (Dag Brattli)
[ 3.532509] nsc_ircc_open(), can't get iobase of 0x2f8
[ 3.532558] nsc-ircc, Found chip at base=0x164e
[ 3.532599] nsc-ircc, driver loaded (Dag Brattli)
[ 3.532602] nsc_ircc_open(), can't get iobase of 0x2f8
[ 3.533123] nsc-ircc 00:0a: disabled
[ 3.550795] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 3.550799] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 3.550910] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.550926] iwl3945 0000:03:00.0: setting latency timer to 64
[ 3.587988] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 3.587992] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.588012] thinkpad_acpi: ThinkPad BIOS 79ETE6WW (2.26 ), EC 79HT50WW-1.07
[ 3.588015] thinkpad_acpi: Lenovo ThinkPad T60, model 1952WUV
[ 3.588334] thinkpad_acpi: radio switch found; radios are enabled
[ 3.588436] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.588440] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.593630] Registered led device: tpacpi::thinklight
[ 3.593686] Registered led device: tpacpi::power
[ 3.593731] Registered led device: tpacpi::standby
[ 3.593773] Registered led device: tpacpi::thinkvantage
[ 3.596379] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 3.596512] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.601276] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 3.605769] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 3.605774] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 3.606881] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X
[ 3.621314] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 3.691344] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.691349] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 3.691409] HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 3.691443] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.710108] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 3.710112] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[ 3.710120] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x9000-0xcfff]
[ 3.710124] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x9000-0xcfff: excluding 0x9000-0x90ff 0x9400-0x94ff
[ 3.737390] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 3.739574]
[ 3.739580] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
[ 3.739585] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: excluding 0xe4300000-0xe46cffff
[ 3.739740] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 3.739744] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: excluding 0xe0000000-0xe3ffffff
[ 3.739766] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7]
[ 3.739769] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0xcf7: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377 0x3c0-0x3df 0x3f0-0x3f7 0x4d0-0x4d7 0x800-0x80f
[ 3.748616] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x0d00-0xffff]
[ 3.748621] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd00-0xffff: excluding 0x1000-0x107f 0x1180-0x11bf 0x15e0-0x15ef 0x1600-0x1607 0x1610-0x161f 0x1648-0x165f 0x1680-0x169f 0x1800-0x1807 0x1810-0x189f 0x18b0-0x18d7 0x18e0-0x18ff 0x2000-0x90ff 0x9400-0x94ff
[ 3.803881] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff]
[ 3.803886] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: excluding 0xa0000-0xbffff
[ 3.803901] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d0000-0x000d3fff]
[ 3.803904] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0d3fff: clean.
[ 3.803910] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff]
[ 3.803913] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d4000-0x0d7fff: clean.
[ 3.803918] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff]
[ 3.803922] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dbfff: clean.
[ 3.803927] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0xfebfffff]
[ 3.803931] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0xfebfffff: excluding 0x80000000-0x807fffff 0x84000000-0x87ffffff 0xd0000000-0xe47fffff 0xe8000000-0xee7fffff 0xf0000000-0xf3ffffff 0xfe800000-0xfeffffff
[ 3.817155] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 3.819367] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 3.820315] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 3.821121] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 3.821969] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
[ 3.822037] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 3.822104] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 3.822174] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 3.925699] Adding 2104476k swap on /dev/sda1. Priority:-1 extents:1 across:2104476k SS
[ 4.039615] loop: module loaded
[ 4.166504] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
[ 4.166513] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 4.217734] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 4.333985] fuse init (API version 7.13)
[ 4.369640] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[ 4.413562] apm: BIOS not found.
[ 4.854708] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 4.858919] Bluetooth: Core ver 2.15
[ 4.865044] NET: Registered protocol family 31
[ 4.865047] Bluetooth: HCI device and connection manager initialized
[ 4.865051] Bluetooth: HCI socket layer initialized
[ 4.882277] lp: driver loaded but no devices found
[ 4.886060] Bluetooth: L2CAP ver 2.14
[ 4.886063] Bluetooth: L2CAP socket layer initialized
[ 4.900469] Bluetooth: RFCOMM TTY layer initialized
[ 4.900474] Bluetooth: RFCOMM socket layer initialized
[ 4.900476] Bluetooth: RFCOMM ver 1.11
[ 4.903063] ppdev: user-space parallel port driver
[ 4.908205] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 4.908779] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 4.911529] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 4.936306] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 5.019375] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.019378] Bluetooth: BNEP filters: protocol multicast
[ 5.032040] phy0: device now idle
[ 5.036721] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.049859] Bridge firewalling registered
[ 5.074532] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.074535] Bluetooth: SCO socket layer initialized
[ 5.115612] phy0: device no longer idle - scanning
[ 5.222062] ttyS1: LSR safety check engaged!
[ 5.550908] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input10
[ 5.712537] [drm] Initialized drm 1.1.0 20060810
[ 5.742545] i915 0000:00:02.0: power state changed by ACPI to D0
[ 5.742591] i915 0000:00:02.0: power state changed by ACPI to D0
[ 5.742599] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.742606] i915 0000:00:02.0: setting latency timer to 64
[ 5.746159] [drm] set up 7M of stolen space
[ 6.178976] [drm] initialized overlay support
[ 6.649625] Console: switching to colour frame buffer device 128x48
[ 6.649633] fb0: inteldrmfb frame buffer device
[ 6.649636] registered panic notifier
[ 6.649645] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.820183] phy0: device now idle
[ 9.800094] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.036720] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
[ 12.522112] phy0: device no longer idle - in use
[ 12.524868] wlan0: sta_find_ibss (active_ibss=0)
[ 12.524877] sta_find_ibss: selected 06:be:a1:c9:16:c0 current 00:00:00:00:00:00
[ 12.524879] wlan0: Selected IBSS BSSID 06:be:a1:c9:16:c0 based on configured SSID
[ 12.604735] phy0: Adding new IBSS station 00:08:a1:8a:d8:bf (dev=wlan0)
[ 12.604743] phy0: Allocated STA 00:08:a1:8a:d8:bf
[ 12.604747] phy0: Added IBSS STA 00:08:a1:8a:d8:bf
[ 12.604758] phy0: Finished adding IBSS STA 00:08:a1:8a:d8:bf
[ 23.044068] wlan0: no IPv6 routers present
[ 29.108889] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 29.108899] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 29.108921] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 29.108928] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 30.985706] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 30.985715] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 31.090023] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 31.090031] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 31.195035] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 31.195043] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 31.406864] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 31.406873] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 41.662474] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 41.662484] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 45.671412] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 45.671422] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 47.674368] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 47.674378] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 49.678332] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 49.678342] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 59.698165] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 59.698175] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 63.707071] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 63.707081] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 68.852134] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 68.852144] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 69.706594] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.706604] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.718985] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.718992] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 69.726177] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.726184] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.747119] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.747126] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.766758] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.766765] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.787578] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.787585] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.806776] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.806783] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.827599] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.827606] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 69.846801] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 69.846808] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 71.721950] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 71.721960] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 77.733841] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 77.733851] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 79.737786] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 79.737795] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 81.742754] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 81.742763] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 87.642155] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.642165] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 87.706128] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.706135] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 87.754653] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.754662] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 87.770124] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.770132] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 87.834147] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 87.834154] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 91.089016] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 91.089022] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 91.194146] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 91.194155] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 91.300366] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 91.300377] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 91.405092] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 91.405101] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 95.761530] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 95.761540] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 109.181057] CE: hpet increased min_delta_ns to 7500 nsec
[ 110.933060] CE: hpet increased min_delta_ns to 11250 nsec
[ 111.794253] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 111.794262] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 129.709086] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.709096] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.728228] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.728236] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.749103] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.749110] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.768203] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.768211] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.789139] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.789146] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.808304] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.808311] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.829058] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.829065] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 129.829906] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 129.829913] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 133.836815] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 133.836822] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 135.841819] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 135.841829] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 147.635869] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 147.635879] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 147.699839] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 147.699847] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 147.763843] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 147.763851] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 147.827844] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 147.827851] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 150.983640] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 150.983650] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 151.088054] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 151.088062] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 151.300117] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 151.300127] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 151.405105] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 151.405114] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 171.085576] wlan0: RX ProbeReq SA=00:19:99:1d:cf:38 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 171.085586] wlan0: Sending ProbeResp to 00:19:99:1d:cf:38
[ 189.707544] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.707554] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.727003] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.727011] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.747523] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.747531] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.766690] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.766698] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.787509] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.787517] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.806709] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.806716] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 189.829977] wlan0: RX ProbeReq SA=00:25:56:97:9d:d2 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 189.829985] wlan0: Sending ProbeResp to 00:25:56:97:9d:d2
[ 199.959708] wlan0: RX ProbeReq SA=00:22:43:42:3b:35 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 199.959717] wlan0: Sending ProbeResp to 00:22:43:42:3b:35
[ 209.125418] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 209.125428] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 209.125450] wlan0: RX ProbeReq SA=00:11:09:9a:bd:3a DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 209.125457] wlan0: Sending ProbeResp to 00:11:09:9a:bd:3a
[ 210.982887] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 210.982896] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 211.087134] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 211.087142] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
[ 211.403394] wlan0: RX ProbeReq SA=00:25:56:b3:06:f3 DA=ff:ff:ff:ff:ff:ff BSSID=ff:ff:ff:ff:ff:ff (tx_last_beacon=1)
[ 211.403404] wlan0: Sending ProbeResp to 00:25:56:b3:06:f3
On Mon, 2010-05-24 at 10:05 +0200, Johannes Berg wrote:
> On Sun, 2010-05-23 at 19:22 +0300, Mikko Rapeli wrote:
> > This is flooded to syslog quite a few times when connecting to another
> > Linux box in adhoc mode. Syslog files fill up the disk fast:
> >
> > $ dmesg | tail -10
> > [ 1986.772018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.776149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.780076] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.784020] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.788149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.792108] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.796070] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.800018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.804186] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.808072] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
>
> Hm. That's not supposed to happen over and over again that quickly, only
> every few seconds. I wonder if that's related to the other timer issue
> that we saw in ibss.
Try this patch please
http://thread.gmane.org/gmane.linux.kernel/989309/focus=989434
johannes
On Mon, May 24, 2010 at 10:05:45AM +0200, Johannes Berg wrote:
> On Sun, 2010-05-23 at 19:22 +0300, Mikko Rapeli wrote:
> > This is flooded to syslog quite a few times when connecting to another
> > Linux box in adhoc mode. Syslog files fill up the disk fast:
> >
> > $ dmesg | tail -10
> > [ 1986.772018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.776149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.780076] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.784020] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.788149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.792108] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.796070] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.800018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.804186] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > [ 1986.808072] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
>
> Hm. That's not supposed to happen over and over again that quickly, only
> every few seconds. I wonder if that's related to the other timer issue
> that we saw in ibss.
I've had this spamming problem since December 2009 with all 2.6.32 kernels
from Debian unstable, so this not something new from 2.6.34.
-Mikko
On Sun, 2010-05-23 at 19:31 +0300, Mikko Rapeli wrote:
> [ 14.901816] wlan0: Selected IBSS BSSID 06:be:a1:c9:16:c0 based on configured SSID
> [ 16.231904] BUG: unable to handle kernel NULL pointer dereference at (null)
> [ 16.231914] IP: [<f8309788>] iwl3945_request_scan+0x39a/0x50b [iwl3945]
http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2208
johannes
On Sun, 2010-05-23 at 19:22 +0300, Mikko Rapeli wrote:
> This is flooded to syslog quite a few times when connecting to another
> Linux box in adhoc mode. Syslog files fill up the disk fast:
>
> $ dmesg | tail -10
> [ 1986.772018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> [ 1986.776149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> [ 1986.780076] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> [ 1986.784020] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> [ 1986.788149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> [ 1986.792108] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> [ 1986.796070] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> [ 1986.800018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> [ 1986.804186] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> [ 1986.808072] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
Hm. That's not supposed to happen over and over again that quickly, only
every few seconds. I wonder if that's related to the other timer issue
that we saw in ibss.
johannes
On Mon, May 24, 2010 at 10:24:17AM +0200, Johannes Berg wrote:
> Do I even want to comment on that? In any case -- it's not supposed to
> be spamming you so we want to find the root cause. Can you enable
> verbose IBSS debug to hopefully see why it's happening?
Sure, I will take logs when I get access to the machine later today.
-Mikko
On Mon, 2010-05-24 at 11:14 +0300, Mikko Rapeli wrote:
> > > $ dmesg | tail -10
> > > [ 1986.772018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > > [ 1986.776149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > > [ 1986.780076] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > > [ 1986.784020] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > > [ 1986.788149] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > > [ 1986.792108] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > > [ 1986.796070] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > > [ 1986.800018] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > > [ 1986.804186] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> > > [ 1986.808072] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
> >
> > Hm. That's not supposed to happen over and over again that quickly, only
> > every few seconds. I wonder if that's related to the other timer issue
> > that we saw in ibss.
>
> I've had this spamming problem since December 2009 with all 2.6.32 kernels
> from Debian unstable, so this not something new from 2.6.34.
Do I even want to comment on that? In any case -- it's not supposed to
be spamming you so we want to find the root cause. Can you enable
verbose IBSS debug to hopefully see why it's happening?
johannes