In preparation for a TX power setting interface in the nl80211, change the
.set_tx_power function to use mBm units instead of dBm for greater accuracy and
smaller power levels.
Also, already in advance move the tx_power_setting enumeration to nl80211.
This change affects the .tx_set_power function prototype. As a result, the
corresponding changes are needed to modules using it. These are mac80211,
iwmc3200wifi and rndis_wlan.
Cc: Samuel Ortiz <[email protected]>
Cc: Jussi Kivilinna <[email protected]>
Signed-off-by: Juuso Oikarinen <[email protected]>
---
drivers/net/wireless/iwmc3200wifi/cfg80211.c | 12 ++++++++----
drivers/net/wireless/rndis_wlan.c | 20 +++++++++++++-------
include/linux/nl80211.h | 13 +++++++++++++
include/net/cfg80211.h | 15 +--------------
net/mac80211/cfg.c | 22 +++++++++++-----------
net/wireless/wext-compat.c | 10 +++++-----
6 files changed, 51 insertions(+), 41 deletions(-)
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
index 902e95f..6061967 100644
--- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
@@ -670,20 +670,24 @@ static int iwm_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev,
}
static int iwm_cfg80211_set_txpower(struct wiphy *wiphy,
- enum tx_power_setting type, int dbm)
+ enum nl80211_tx_power_setting type, int mbm)
{
struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
int ret;
switch (type) {
- case TX_POWER_AUTOMATIC:
+ case NL80211_TX_POWER_AUTOMATIC:
return 0;
- case TX_POWER_FIXED:
+ case NL80211_TX_POWER_FIXED:
+ if (mbm < 0 || (mbm % 100))
+ return -EOPNOTSUPP;
+
if (!test_bit(IWM_STATUS_READY, &iwm->status))
return 0;
ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
- CFG_TX_PWR_LIMIT_USR, dbm * 2);
+ CFG_TX_PWR_LIMIT_USR,
+ MBM_TO_DBM(mbm) * 2);
if (ret < 0)
return ret;
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 4102cca..5e26edb 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -520,8 +520,9 @@ static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
static int rndis_set_wiphy_params(struct wiphy *wiphy, u32 changed);
-static int rndis_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type,
- int dbm);
+static int rndis_set_tx_power(struct wiphy *wiphy,
+ enum nl80211_tx_power_setting type,
+ int mbm);
static int rndis_get_tx_power(struct wiphy *wiphy, int *dbm);
static int rndis_connect(struct wiphy *wiphy, struct net_device *dev,
@@ -1856,20 +1857,25 @@ static int rndis_set_wiphy_params(struct wiphy *wiphy, u32 changed)
return 0;
}
-static int rndis_set_tx_power(struct wiphy *wiphy, enum tx_power_setting type,
- int dbm)
+static int rndis_set_tx_power(struct wiphy *wiphy,
+ enum nl80211_tx_power_setting type,
+ int mbm)
{
struct rndis_wlan_private *priv = wiphy_priv(wiphy);
struct usbnet *usbdev = priv->usbdev;
- netdev_dbg(usbdev->net, "%s(): type:0x%x dbm:%i\n",
- __func__, type, dbm);
+ netdev_dbg(usbdev->net, "%s(): type:0x%x mbm:%i\n",
+ __func__, type, mbm);
+
+ if (mbm < 0 || (mbm % 100))
+ return -ENOTSUPP;
/* Device doesn't support changing txpower after initialization, only
* turn off/on radio. Support 'auto' mode and setting same dBm that is
* currently used.
*/
- if (type == TX_POWER_AUTOMATIC || dbm == get_bcm4320_power_dbm(priv)) {
+ if (type == NL80211_TX_POWER_AUTOMATIC ||
+ MBM_TO_DBM(mbm) == get_bcm4320_power_dbm(priv)) {
if (!priv->radio_on)
disassociate(usbdev, true); /* turn on radio */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 64fb32b..07aa046 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1659,4 +1659,17 @@ enum nl80211_cqm_rssi_threshold_event {
NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
};
+
+/**
+ * enum nl80211_tx_power_setting - TX power adjustment
+ * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
+ * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
+ * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
+ */
+enum nl80211_tx_power_setting {
+ NL80211_TX_POWER_AUTOMATIC,
+ NL80211_TX_POWER_LIMITED,
+ NL80211_TX_POWER_FIXED,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 64374f4..9b8b3f4 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -875,19 +875,6 @@ enum wiphy_params_flags {
WIPHY_PARAM_COVERAGE_CLASS = 1 << 4,
};
-/**
- * enum tx_power_setting - TX power adjustment
- *
- * @TX_POWER_AUTOMATIC: the dbm parameter is ignored
- * @TX_POWER_LIMITED: limit TX power by the dbm parameter
- * @TX_POWER_FIXED: fix TX power to the dbm parameter
- */
-enum tx_power_setting {
- TX_POWER_AUTOMATIC,
- TX_POWER_LIMITED,
- TX_POWER_FIXED,
-};
-
/*
* cfg80211_bitrate_mask - masks for bitrate control
*/
@@ -1149,7 +1136,7 @@ struct cfg80211_ops {
int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed);
int (*set_tx_power)(struct wiphy *wiphy,
- enum tx_power_setting type, int dbm);
+ enum nl80211_tx_power_setting type, int mbm);
int (*get_tx_power)(struct wiphy *wiphy, int *dbm);
int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 003b6ad..f4efbfa 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1329,28 +1329,28 @@ static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
}
static int ieee80211_set_tx_power(struct wiphy *wiphy,
- enum tx_power_setting type, int dbm)
+ enum nl80211_tx_power_setting type, int mbm)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_channel *chan = local->hw.conf.channel;
u32 changes = 0;
switch (type) {
- case TX_POWER_AUTOMATIC:
+ case NL80211_TX_POWER_AUTOMATIC:
local->user_power_level = -1;
break;
- case TX_POWER_LIMITED:
- if (dbm < 0)
- return -EINVAL;
- local->user_power_level = dbm;
+ case NL80211_TX_POWER_LIMITED:
+ if (mbm < 0 || (mbm % 100))
+ return -EOPNOTSUPP;
+ local->user_power_level = MBM_TO_DBM(mbm);
break;
- case TX_POWER_FIXED:
- if (dbm < 0)
- return -EINVAL;
+ case NL80211_TX_POWER_FIXED:
+ if (mbm < 0 || (mbm % 100))
+ return -EOPNOTSUPP;
/* TODO: move to cfg80211 when it knows the channel */
- if (dbm > chan->max_power)
+ if (MBM_TO_DBM(mbm) > chan->max_power)
return -EINVAL;
- local->user_power_level = dbm;
+ local->user_power_level = MBM_TO_DBM(mbm);
break;
}
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 9634299..1ff1e9f 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -829,7 +829,7 @@ int cfg80211_wext_siwtxpower(struct net_device *dev,
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
- enum tx_power_setting type;
+ enum nl80211_tx_power_setting type;
int dbm = 0;
if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
@@ -852,7 +852,7 @@ int cfg80211_wext_siwtxpower(struct net_device *dev,
if (data->txpower.value < 0)
return -EINVAL;
dbm = data->txpower.value;
- type = TX_POWER_FIXED;
+ type = NL80211_TX_POWER_FIXED;
/* TODO: do regulatory check! */
} else {
/*
@@ -860,10 +860,10 @@ int cfg80211_wext_siwtxpower(struct net_device *dev,
* passed in from userland.
*/
if (data->txpower.value < 0) {
- type = TX_POWER_AUTOMATIC;
+ type = NL80211_TX_POWER_AUTOMATIC;
} else {
dbm = data->txpower.value;
- type = TX_POWER_LIMITED;
+ type = NL80211_TX_POWER_LIMITED;
}
}
} else {
@@ -872,7 +872,7 @@ int cfg80211_wext_siwtxpower(struct net_device *dev,
return 0;
}
- return rdev->ops->set_tx_power(wdev->wiphy, type, dbm);
+ return rdev->ops->set_tx_power(wdev->wiphy, type, DBM_TO_MBM(dbm));
}
EXPORT_SYMBOL_GPL(cfg80211_wext_siwtxpower);
--
1.6.3.3
Quoting "Juuso Oikarinen" <[email protected]>:
> In preparation for a TX power setting interface in the nl80211, change the
> .set_tx_power function to use mBm units instead of dBm for greater
> accuracy and
> smaller power levels.
>
> Also, already in advance move the tx_power_setting enumeration to nl80211.
>
> This change affects the .tx_set_power function prototype. As a result, the
> corresponding changes are needed to modules using it. These are mac80211,
> iwmc3200wifi and rndis_wlan.
rndis_wlan part:
Acked-by: Jussi Kivilinna <[email protected]>
-Jussi
On Mon, Jun 21, 2010 at 11:39:25AM +0100, Juuso Oikarinen wrote:
> In preparation for a TX power setting interface in the nl80211, change the
> .set_tx_power function to use mBm units instead of dBm for greater accuracy and
> smaller power levels.
>
> Also, already in advance move the tx_power_setting enumeration to nl80211.
>
> This change affects the .tx_set_power function prototype. As a result, the
> corresponding changes are needed to modules using it. These are mac80211,
> iwmc3200wifi and rndis_wlan.
For the iwm part:
Acked-by: Samuel Ortiz <[email protected]>
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
---------------------------------------------------------------------
Intel Corporation SAS (French simplified joint stock company)
Registered headquarters: "Les Montalets"- 2, rue de Paris,
92196 Meudon Cedex, France
Registration Number: 302 456 199 R.C.S. NANTERRE
Capital: 4,572,000 Euros
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
This patch adds transmit power setting type and transmit power level attributes
to NL80211_CMD_SET_WIPHY in order to facilitate adjusting of the transmit power
level of the device.
The added attributes allow selection of automatic, limited or fixed transmit
power level, with the level definable in signed mBm format.
Signed-off-by: Juuso Oikarinen <[email protected]>
---
include/linux/nl80211.h | 9 +++++++++
net/wireless/nl80211.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 07aa046..2c87016 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -725,6 +725,12 @@ enum nl80211_commands {
* @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
* connected to this BSS.
*
+ * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
+ * &enum nl80211_tx_power_setting for possible values.
+ * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
+ * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
+ * for non-automatic settings.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -882,6 +888,9 @@ enum nl80211_attrs {
NL80211_ATTR_AP_ISOLATE,
+ NL80211_ATTR_WIPHY_TX_POWER_SETTING,
+ NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 41529ac..a999fc1 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -153,6 +153,9 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_CQM] = { .type = NLA_NESTED, },
[NL80211_ATTR_LOCAL_STATE_CHANGE] = { .type = NLA_FLAG },
[NL80211_ATTR_AP_ISOLATE] = { .type = NLA_U8 },
+
+ [NL80211_ATTR_WIPHY_TX_POWER_SETTING] = { .type = NLA_U32 },
+ [NL80211_ATTR_WIPHY_TX_POWER_LEVEL] = { .type = NLA_U32 },
};
/* policy for the attributes */
@@ -869,6 +872,34 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
goto bad_res;
}
+ if (info->attrs[NL80211_ATTR_WIPHY_TX_POWER_SETTING]) {
+ enum nl80211_tx_power_setting type;
+ int idx, mbm = 0;
+
+ if (!rdev->ops->set_tx_power) {
+ return -EOPNOTSUPP;
+ goto bad_res;
+ }
+
+ idx = NL80211_ATTR_WIPHY_TX_POWER_SETTING;
+ type = nla_get_u32(info->attrs[idx]);
+
+ if (!info->attrs[NL80211_ATTR_WIPHY_TX_POWER_LEVEL] &&
+ (type != NL80211_TX_POWER_AUTOMATIC)) {
+ result = -EINVAL;
+ goto bad_res;
+ }
+
+ if (type != NL80211_TX_POWER_AUTOMATIC) {
+ idx = NL80211_ATTR_WIPHY_TX_POWER_LEVEL;
+ mbm = nla_get_u32(info->attrs[idx]);
+ }
+
+ result = rdev->ops->set_tx_power(&rdev->wiphy, type, mbm);
+ if (result)
+ goto bad_res;
+ }
+
changed = 0;
if (info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]) {
--
1.6.3.3