Hello,
Basic DFS functionality requires that when we change to radar
enabled channels we need to wait and listen before we can send
beacons/frames -> Channel Availability Check (CAC).
There is a case when we can switch to it immediately if we have
been monitoring it off_channel for specific time. This is bit
more complicated and doesn't need to be implemented in the first
place because it's sort of functional optimization.
Anyway there is a need for mechanism to control when to enable
beacons if we switch to radar channel.
Pseudo-code-diff bellow is an example for ath9k where we could enable
beacons at once or fire a worker to re-enable it after CAC expires
if radar hasn't been detected. In theory we need only to disable
beacons because we shouldn't get any directed frames we could reply
to and stations anyway can't probe directly. In practice to be
sure it couldn't be probably done with making rx filters more
restrictive during CAC period. Maybe there are other ways as well.
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -285,8 +285,14 @@
ath9k_hw_set_interrupts(ah, ah->imask);
if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
- if (sc->sc_flags & SC_OP_BEACONS)
- ath_beacon_config(sc, NULL);
+
+ if (sc->sc_flags & SC_OP_BEACONS) {
+ if (channel->flags & IEEE80211_CHAN_RADAR
+ && !(channel->flags & IEEE80211_CHAN_NOL_FREE))
+ ieee80211_queue_delayed_work
+ (sc->hw, &sc->dfs_wait_cac_work, 0);
+ else
+ ath_beacon_config(sc, NULL);
+ }
+
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
ath_start_ani(common);
}
Problem with this solution is that every driver would need to do
their own timers and state machines to get this functionality which
is shared by all.
I don't know about other driver's structures but maybe a better way
would be to implement mac80211 command to disable/enable beacons and
set rx filters which every driver supporting DFS would have to implement.
Mac80211 would have then timer which would control when to enable
beacons. I guess Non Occupancy List (NOL) would be handled there as
well so all the DFS timers could be in the same place.
Any comments?
Br,
Wojtek
On Tuesday, January 11, 2011 15:40:56 Wojciech Dubowik wrote:
> Hello,
> Basic DFS functionality requires that when we change to radar
> enabled channels we need to wait and listen before we can send
> beacons/frames -> Channel Availability Check (CAC).
> There is a case when we can switch to it immediately if we have
> been monitoring it off_channel for specific time. This is bit
> more complicated and doesn't need to be implemented in the first
> place because it's sort of functional optimization.
>
> Anyway there is a need for mechanism to control when to enable
> beacons if we switch to radar channel.
>
> Pseudo-code-diff bellow is an example for ath9k where we could enable
> beacons at once or fire a worker to re-enable it after CAC expires
> if radar hasn't been detected. In theory we need only to disable
> beacons because we shouldn't get any directed frames we could reply
> to and stations anyway can't probe directly. In practice to be
> sure it couldn't be probably done with making rx filters more
> restrictive during CAC period. Maybe there are other ways as well.
>
> --- a/drivers/net/wireless/ath/ath9k/main.c
> +++ b/drivers/net/wireless/ath/ath9k/main.c
> @@ -285,8 +285,14 @@
> ath9k_hw_set_interrupts(ah, ah->imask);
>
> if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
> - if (sc->sc_flags & SC_OP_BEACONS)
> - ath_beacon_config(sc, NULL);
> +
> + if (sc->sc_flags & SC_OP_BEACONS) {
> + if (channel->flags & IEEE80211_CHAN_RADAR
> + && !(channel->flags &
> IEEE80211_CHAN_NOL_FREE)) +
ieee80211_queue_delayed_work
> + (sc->hw, &sc->dfs_wait_cac_work, 0);
> + else
> + ath_beacon_config(sc, NULL);
> + }
> +
> ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
0);
> ath_start_ani(common);
> }
>
>
>
> Problem with this solution is that every driver would need to do
> their own timers and state machines to get this functionality which
> is shared by all.
> I don't know about other driver's structures but maybe a better way
> would be to implement mac80211 command to disable/enable beacons and
> set rx filters which every driver supporting DFS would have to implement.
> Mac80211 would have then timer which would control when to enable
> beacons. I guess Non Occupancy List (NOL) would be handled there as
> well so all the DFS timers could be in the same place.
>
> Any comments?
Afaik we did discuss this on IRC a few weeks ago and if I remember correctly
we decided to discard any configuration request before the CAC is over and the
channel is marked as 'clean'. As in, hostapd is modified such that it sends a
'do radar stuff now' command and only if the channel can be marked as clean
sending the actual configuration, in between those is the CAC period.
--
Best regards,
Dipl.-Inf. (FH) Bernhard Schmidt (software development)
saxnet GmbH, Willy-Brandt-Ring 1, 08606 Oelsnitz
Tel. +49 (0) 3741 300 6. 100 - Fax +49 (0) 3741 300 6. 101
managing director: Steffen Dreise - county court Chemnitz - HRB 23017
http://www.saxnet.de