I have a Belkin USB dongle I use for an access point via hostapd.
Here's the lsusb info:
Bus 001 Device 004: ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2573]
On fedora 14, kernel 2.6.35.13-91.fc14.x86_64 when I have it
plugged in an running with my android phone connected, it gets
warmish, but not too hot.
On fedora 15, kernel 2.6.38.6-27.fc15.x86_64, it gets quite
hot (not enough to raise blisters when I unplug it, but still
noticeably warmer). In fact, I think the heat makes it shut
down because I keep losing wlan0 at random times.
Is there something I can tweak to fix this, or information I
can provide to help understand it? I see various errors in
dmesg when I plug it in, yet it does seem to be working:
[162935.466041] usb 1-3: new high speed USB device using ehci_hcd and address 4
[162935.753964] usb 1-3: New USB device found, idVendor=050d, idProduct=705a
[162935.753971] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=
0
[162935.753978] usb 1-3: Product: Belkin 54g USB Network Adapter
[162935.753982] usb 1-3: Manufacturer: Belkin
[162935.878471] cfg80211: Calling CRDA to update world regulatory domain
[162935.920599] cfg80211: World regulatory domain updated:
[162935.920605] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_
eirp)
[162935.920611] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[162935.920617] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[162935.920622] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[162935.920627] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[162935.920633] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[162936.063578] phy0 -> rt2500usb_init_eeprom: Error - Invalid RT chipset detected.
[162936.063586] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[162936.063647] usbcore: registered new interface driver rt2500usb
[162936.370198] phy1: Selected rate control algorithm 'minstrel'
[162936.370663] Registered led device: rt73usb-phy1::radio
[162936.370704] Registered led device: rt73usb-phy1::assoc
[162936.370741] Registered led device: rt73usb-phy1::quality
[162936.371310] usbcore: registered new interface driver rt73usb
[162936.446340] cfg80211: Calling CRDA for country: US
[162936.452577] cfg80211: Regulatory domain changed to country: US
[162936.452581] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[162936.452585] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[162936.452589] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[162936.452593] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[162936.452596] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[162936.452600] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[162936.452603] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[162941.448940] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[162942.035787] Intel AES-NI instructions are not detected.
[162942.049758] padlock: VIA PadLock not detected.
[162952.026015] wlan0: no IPv6 routers present
(the above is from fedora 14 where it is not running too hot).