The chip version constant (0xCC33) was taken from version 0001.0105.2011
of the GPL vendor driver. Note that this driver version also ships a
firmware update, but I am unsure if it is required for E-CUT chips to
function properly.
A nearby spelling error was also corrected.
Signed-off-by: Forest Bond <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
index 7d87712..2655448 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c
@@ -1743,9 +1743,13 @@ static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
chipver |= CHIP_92D_D_CUT;
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "D-CUT!!!\n");
break;
+ case 0xCC33:
+ chipver |= CHIP_92D_E_CUT;
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "E-CUT!!!\n");
+ break;
default:
chipver |= CHIP_92D_D_CUT;
- RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unkown CUT!\n");
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown CUT!\n");
break;
}
rtlpriv->rtlhal.version = chipver;
--
1.7.0.4
--
Forest Bond
http://www.alittletooquiet.net
http://www.rapidrollout.com