Hi John,
A few more patches with some bugfixes and an update in the firmware APIs
intended for 3.6. The new firmware has already been applied in
linux-firmware.git and renamed, so this should work with the latest
stuff from there.
Please let me know if there are any problems with this.
The following changes since commit abb14fc399bb895bc5ab86af5d4defc2dfec4e70:
Merge tag 'nfc-next-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0 (2012-07-06 16:20:33 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git for-linville
for you to fetch changes up to b950b01308bdcb07b16eb0ea63a76901d029bfd8:
Merge branch 'wl12xx-next' into for-linville (2012-07-08 16:27:26 +0300)
----------------------------------------------------------------
Arik Nemtsov (9):
wlcore/wl12xx/wl18xx: check min FW version
wlcore: don't stop tx queue via watermark if already stopped
wlcore: remove recover cmd from testmode
wlcore: avoid debug prints during intended FW recovery
wlcore: always clear recovery flag during recovery_work
wlcore: don't set SDIO_FAILED flag when driver state is off
wlcore: define number of supported bands internally
wl12xx/wl18xx: use a dynamic PS timeout of 1.5sec
wlcore: determine AP extra rates correctly
Dan Carpenter (1):
wlcore: fix a couple small memory leaks
Eliad Peller (2):
wlcore: implement .flush callback
wlcore: check ssid length against the correct element
Ido Yariv (1):
wlcore: Prevent processing of work items during op_stop
Luciano Coelho (2):
wl12xx/wlcore: increase FW filename version
Merge branch 'wl12xx-next' into for-linville
Victor Goldenshtein (1):
wlcore: enable sched scan while connected
Yoni Divinsky (2):
wlcore: add probe request templates for sched and one-shot scans
wlcore: change the wait for event mechanism
drivers/net/wireless/ti/wl12xx/main.c | 26 ++++++++++++++-----
drivers/net/wireless/ti/wl12xx/wl12xx.h | 14 ++++++++++
drivers/net/wireless/ti/wl18xx/main.c | 27 ++++++++++++++-----
drivers/net/wireless/ti/wl18xx/wl18xx.h | 7 +++++
drivers/net/wireless/ti/wlcore/boot.c | 55 +++++++++++++++++++++++++++++++++++++--
drivers/net/wireless/ti/wlcore/cmd.c | 22 +++++++++++++---
drivers/net/wireless/ti/wlcore/cmd.h | 6 ++---
drivers/net/wireless/ti/wlcore/init.c | 16 ++++++++++++
drivers/net/wireless/ti/wlcore/io.c | 6 +++++
drivers/net/wireless/ti/wlcore/io.h | 13 +++++-----
drivers/net/wireless/ti/wlcore/main.c | 75 ++++++++++++++++++++++++++++++-----------------------
drivers/net/wireless/ti/wlcore/scan.c | 11 ++++----
drivers/net/wireless/ti/wlcore/sdio.c | 6 -----
drivers/net/wireless/ti/wlcore/spi.c | 6 -----
drivers/net/wireless/ti/wlcore/testmode.c | 13 +---------
drivers/net/wireless/ti/wlcore/wlcore.h | 25 ++++++++++++++++--
drivers/net/wireless/ti/wlcore/wlcore_i.h | 16 ++++--------
17 files changed, 242 insertions(+), 102 deletions(-)
--
Cheers,
Luca.
Due to yesterday's unfortunate rebasing, I grabbed these patches and
rebased them on top of the current wireless-next.
Again, I apologize for whatever confusion or inconvenience that caused...
John
On Sun, Jul 08, 2012 at 04:40:54PM +0300, Luciano Coelho wrote:
> Oops, fixed the subject, which was obviously sent with the wrong date.
> Sorry for the mix up.
>
> Luca.
>
> On Sun, 2012-07-08 at 16:39 +0300, Luciano Coelho wrote:
> > Hi John,
> >
> > A few more patches with some bugfixes and an update in the firmware APIs
> > intended for 3.6. The new firmware has already been applied in
> > linux-firmware.git and renamed, so this should work with the latest
> > stuff from there.
> >
> > Please let me know if there are any problems with this.
> >
> >
> > The following changes since commit abb14fc399bb895bc5ab86af5d4defc2dfec4e70:
> >
> > Merge tag 'nfc-next-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0 (2012-07-06 16:20:33 -0400)
> >
> > are available in the git repository at:
> >
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git for-linville
> >
> > for you to fetch changes up to b950b01308bdcb07b16eb0ea63a76901d029bfd8:
> >
> > Merge branch 'wl12xx-next' into for-linville (2012-07-08 16:27:26 +0300)
> >
> > ----------------------------------------------------------------
> >
> > Arik Nemtsov (9):
> > wlcore/wl12xx/wl18xx: check min FW version
> > wlcore: don't stop tx queue via watermark if already stopped
> > wlcore: remove recover cmd from testmode
> > wlcore: avoid debug prints during intended FW recovery
> > wlcore: always clear recovery flag during recovery_work
> > wlcore: don't set SDIO_FAILED flag when driver state is off
> > wlcore: define number of supported bands internally
> > wl12xx/wl18xx: use a dynamic PS timeout of 1.5sec
> > wlcore: determine AP extra rates correctly
> >
> > Dan Carpenter (1):
> > wlcore: fix a couple small memory leaks
> >
> > Eliad Peller (2):
> > wlcore: implement .flush callback
> > wlcore: check ssid length against the correct element
> >
> > Ido Yariv (1):
> > wlcore: Prevent processing of work items during op_stop
> >
> > Luciano Coelho (2):
> > wl12xx/wlcore: increase FW filename version
> > Merge branch 'wl12xx-next' into for-linville
> >
> > Victor Goldenshtein (1):
> > wlcore: enable sched scan while connected
> >
> > Yoni Divinsky (2):
> > wlcore: add probe request templates for sched and one-shot scans
> > wlcore: change the wait for event mechanism
> >
> > drivers/net/wireless/ti/wl12xx/main.c | 26 ++++++++++++++-----
> > drivers/net/wireless/ti/wl12xx/wl12xx.h | 14 ++++++++++
> > drivers/net/wireless/ti/wl18xx/main.c | 27 ++++++++++++++-----
> > drivers/net/wireless/ti/wl18xx/wl18xx.h | 7 +++++
> > drivers/net/wireless/ti/wlcore/boot.c | 55 +++++++++++++++++++++++++++++++++++++--
> > drivers/net/wireless/ti/wlcore/cmd.c | 22 +++++++++++++---
> > drivers/net/wireless/ti/wlcore/cmd.h | 6 ++---
> > drivers/net/wireless/ti/wlcore/init.c | 16 ++++++++++++
> > drivers/net/wireless/ti/wlcore/io.c | 6 +++++
> > drivers/net/wireless/ti/wlcore/io.h | 13 +++++-----
> > drivers/net/wireless/ti/wlcore/main.c | 75 ++++++++++++++++++++++++++++++-----------------------
> > drivers/net/wireless/ti/wlcore/scan.c | 11 ++++----
> > drivers/net/wireless/ti/wlcore/sdio.c | 6 -----
> > drivers/net/wireless/ti/wlcore/spi.c | 6 -----
> > drivers/net/wireless/ti/wlcore/testmode.c | 13 +---------
> > drivers/net/wireless/ti/wlcore/wlcore.h | 25 ++++++++++++++++--
> > drivers/net/wireless/ti/wlcore/wlcore_i.h | 16 ++++--------
> > 17 files changed, 242 insertions(+), 102 deletions(-)
> >
> >
>
>
>
--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.
Oops, fixed the subject, which was obviously sent with the wrong date.
Sorry for the mix up.
Luca.
On Sun, 2012-07-08 at 16:39 +0300, Luciano Coelho wrote:
> Hi John,
>
> A few more patches with some bugfixes and an update in the firmware APIs
> intended for 3.6. The new firmware has already been applied in
> linux-firmware.git and renamed, so this should work with the latest
> stuff from there.
>
> Please let me know if there are any problems with this.
>
>
> The following changes since commit abb14fc399bb895bc5ab86af5d4defc2dfec4e70:
>
> Merge tag 'nfc-next-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0 (2012-07-06 16:20:33 -0400)
>
> are available in the git repository at:
>
>
> git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git for-linville
>
> for you to fetch changes up to b950b01308bdcb07b16eb0ea63a76901d029bfd8:
>
> Merge branch 'wl12xx-next' into for-linville (2012-07-08 16:27:26 +0300)
>
> ----------------------------------------------------------------
>
> Arik Nemtsov (9):
> wlcore/wl12xx/wl18xx: check min FW version
> wlcore: don't stop tx queue via watermark if already stopped
> wlcore: remove recover cmd from testmode
> wlcore: avoid debug prints during intended FW recovery
> wlcore: always clear recovery flag during recovery_work
> wlcore: don't set SDIO_FAILED flag when driver state is off
> wlcore: define number of supported bands internally
> wl12xx/wl18xx: use a dynamic PS timeout of 1.5sec
> wlcore: determine AP extra rates correctly
>
> Dan Carpenter (1):
> wlcore: fix a couple small memory leaks
>
> Eliad Peller (2):
> wlcore: implement .flush callback
> wlcore: check ssid length against the correct element
>
> Ido Yariv (1):
> wlcore: Prevent processing of work items during op_stop
>
> Luciano Coelho (2):
> wl12xx/wlcore: increase FW filename version
> Merge branch 'wl12xx-next' into for-linville
>
> Victor Goldenshtein (1):
> wlcore: enable sched scan while connected
>
> Yoni Divinsky (2):
> wlcore: add probe request templates for sched and one-shot scans
> wlcore: change the wait for event mechanism
>
> drivers/net/wireless/ti/wl12xx/main.c | 26 ++++++++++++++-----
> drivers/net/wireless/ti/wl12xx/wl12xx.h | 14 ++++++++++
> drivers/net/wireless/ti/wl18xx/main.c | 27 ++++++++++++++-----
> drivers/net/wireless/ti/wl18xx/wl18xx.h | 7 +++++
> drivers/net/wireless/ti/wlcore/boot.c | 55 +++++++++++++++++++++++++++++++++++++--
> drivers/net/wireless/ti/wlcore/cmd.c | 22 +++++++++++++---
> drivers/net/wireless/ti/wlcore/cmd.h | 6 ++---
> drivers/net/wireless/ti/wlcore/init.c | 16 ++++++++++++
> drivers/net/wireless/ti/wlcore/io.c | 6 +++++
> drivers/net/wireless/ti/wlcore/io.h | 13 +++++-----
> drivers/net/wireless/ti/wlcore/main.c | 75 ++++++++++++++++++++++++++++++-----------------------
> drivers/net/wireless/ti/wlcore/scan.c | 11 ++++----
> drivers/net/wireless/ti/wlcore/sdio.c | 6 -----
> drivers/net/wireless/ti/wlcore/spi.c | 6 -----
> drivers/net/wireless/ti/wlcore/testmode.c | 13 +---------
> drivers/net/wireless/ti/wlcore/wlcore.h | 25 ++++++++++++++++--
> drivers/net/wireless/ti/wlcore/wlcore_i.h | 16 ++++--------
> 17 files changed, 242 insertions(+), 102 deletions(-)
>
>