Dear all,
(please cc)
I am having serious troubles with my rtl8192se card:
kernel: 3.6.0-rc2+, compiled from git today, same with rc1
rtl8192se in kernel driver, loaded with debug=3
Debian sid
Lenovo Thinkpad Edge
When starting from cold boot, the driver associates, but no packet
whatsoever leaves the computer it seems, pinging the gateway
does not return anything, and ns lookups are not working.
In the logs I see many instances of:
rtlwifi:rtl_tx_agg_start():<0-0> on ra = 00:0a:79:eb:56:10 tid = 6 seq:39
rtlwifi:rtl_action_proc():<200-1> Tx ACT_ADDBAREQ From :88:9f:fa:f9:07:28
rtlwifi:rtl_tx_agg_stop():<0-0> on ra = 00:0a:79:eb:56:10 tid = 6
rtlwifi:rtl_action_proc():<400-1> ACT_ADDBADEL From :88:9f:fa:f9:07:28
rtlwifi:rtl_action_proc():<10000-1> Rx ACT_ADDBARSP From :00:0a:79:eb:56:10
in various orders.
trying to remove the module gave me:
[ 649.459652] wlan0: deauthenticating from 00:0a:79:eb:56:10 by local choice (reason=3)
[ 649.459701] rtlwifi:rtl_tx_agg_stop():<0-0> on ra = 00:0a:79:eb:56:10 tid = 0
[ 659.094654] rtlwifi:rtl_op_set_key():<0-0> Disabling hardware based encryption for keyidx: 0, mac: 00:0a:79:eb:56:10
[ 659.094659] rtlwifi:rtl_op_set_key():<0-0> alg:CCMP
[ 659.094663] rtlwifi:rtl_op_set_key():<0-0> set enable_hw_sec, key_type:4(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)
[ 659.094667] rtlwifi:rtl_op_set_key():<0-0> disable key delete one entry
[ 659.094670] rtlwifi:rtl_cam_delete_one_entry():<0-0> key_idx:0
[ 659.094673] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A4: 0
[ 659.094676] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A0: 80010000
[ 659.094719] rtlwifi:rtl_op_sta_remove():<0-0> Remove sta addr is 00:0a:79:eb:56:10
[ 659.142712] rtlwifi:rtl_op_bss_info_changed():<0-0> BSS_CHANGED_UN_ASSOC
[ 659.142725] rtlwifi:rtl_op_bss_info_changed():<0-0> 00:00:00:00:00:00
[ 659.190740] rtlwifi:rtl_op_set_key():<0-0> Disabling hardware based encryption for keyidx: 1, mac: ff:ff:ff:ff:ff:ff
[ 659.190744] rtlwifi:rtl_op_set_key():<0-0> alg:TKIP
[ 659.190747] rtlwifi:rtl_op_set_key():<0-0> set enable_hw_sec, key_type:2(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)
[ 659.190750] rtlwifi:rtl_op_set_key():<0-0> disable key delete one entry
[ 659.190753] rtlwifi:rtl_cam_delete_one_entry():<0-0> key_idx:1
[ 659.190756] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A4: 0
[ 659.190759] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A0: 80010008
After that I reloaded the module and then it is getting worse:
rtl8192se 0000:03:00.0: Refused to change power state, currently in D3
rtl8192se:_rtl92se_read_adapter_info():<0-0> RTL819X Not boot from eeprom, check it !!
tl8192se: FW Power Save off (module option)
rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
Loading firmware rtlwifi/rtl8192sefw.bin
...
rtl8192se:_rtl92se_macconfig_after_fwdownload():<0-0> OK
rtl8192se:rtl92s_phy_bb_config():<0-0> RF_Type(0) does not match RF_Num(4)!!
rtl8192se:rtl92s_phy_bb_config():<0-0> path1 0xf, path2 0xf, pathmap 0xf
rtlwifi:rtl_pci_start():<0-0> OK
rtl8192se:rtl92s_phy_chk_fwcmd_iodone():<0-0> Set FW Cmd fail!!
rtl8192se:rtl92s_phy_chk_fwcmd_iodone():<0-0> Set FW Cmd fail!!
rtl8192se:rtl92s_phy_set_rf_power_state():<0-0> IPS Set eRf nic disable
rtl8192se:rtl92s_phy_set_rf_power_state():<0-1> IPS Set eRf nic enable
rtl8192se:_rtl92se_macconfig_after_fwdownload():<0-1> OK
...
rtl8192se:rtl92s_phy_chk_fwcmd_iodone():<0-0> Set FW Cmd fail!!
rtlwifi:rtl_pci_tx():<200-1> No more TX desc@6, ring->idx = 0, idx = 0, skb_queue_len = 0x0
etc etc.
That is the end, no connection at all, and no way (AFAIS) to get
it back.
Are there any suggestions, patches, ideas to fix and track that down?
THanks a lot
Norbert
(please cc)
------------------------------------------------------------------------
Norbert Preining preining@{jaist.ac.jp, logic.at, debian.org}
JAIST, Japan TeX Live & Debian Developer
DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
------------------------------------------------------------------------
MOTSPUR (n.)
The fourth wheel of a supermarket trolley which looks identical to the
other tree but renders the trolley completely uncontrollable.
MO I RANA Imagine being on a vacation, and it's raining all the time,
you are driving and the kids are making you a nervous wreck. Well you
are definitive in Mo i Rana.
--- Douglas Adams, The Meaning of Liff
+ Larry.
On Wed, Aug 22, 2012 at 11:07:33PM +0900, Norbert Preining wrote:
> Dear all,
>
> (please cc)
>
> I am having serious troubles with my rtl8192se card:
>
> kernel: 3.6.0-rc2+, compiled from git today, same with rc1
> rtl8192se in kernel driver, loaded with debug=3
> Debian sid
> Lenovo Thinkpad Edge
>
> When starting from cold boot, the driver associates, but no packet
> whatsoever leaves the computer it seems, pinging the gateway
> does not return anything, and ns lookups are not working.
>
> In the logs I see many instances of:
> rtlwifi:rtl_tx_agg_start():<0-0> on ra = 00:0a:79:eb:56:10 tid = 6 seq:39
> rtlwifi:rtl_action_proc():<200-1> Tx ACT_ADDBAREQ From :88:9f:fa:f9:07:28
> rtlwifi:rtl_tx_agg_stop():<0-0> on ra = 00:0a:79:eb:56:10 tid = 6
> rtlwifi:rtl_action_proc():<400-1> ACT_ADDBADEL From :88:9f:fa:f9:07:28
> rtlwifi:rtl_action_proc():<10000-1> Rx ACT_ADDBARSP From :00:0a:79:eb:56:10
> in various orders.
>
>
> trying to remove the module gave me:
> [ 649.459652] wlan0: deauthenticating from 00:0a:79:eb:56:10 by local choice (reason=3)
> [ 649.459701] rtlwifi:rtl_tx_agg_stop():<0-0> on ra = 00:0a:79:eb:56:10 tid = 0
> [ 659.094654] rtlwifi:rtl_op_set_key():<0-0> Disabling hardware based encryption for keyidx: 0, mac: 00:0a:79:eb:56:10
> [ 659.094659] rtlwifi:rtl_op_set_key():<0-0> alg:CCMP
> [ 659.094663] rtlwifi:rtl_op_set_key():<0-0> set enable_hw_sec, key_type:4(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)
> [ 659.094667] rtlwifi:rtl_op_set_key():<0-0> disable key delete one entry
> [ 659.094670] rtlwifi:rtl_cam_delete_one_entry():<0-0> key_idx:0
> [ 659.094673] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A4: 0
> [ 659.094676] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A0: 80010000
> [ 659.094719] rtlwifi:rtl_op_sta_remove():<0-0> Remove sta addr is 00:0a:79:eb:56:10
> [ 659.142712] rtlwifi:rtl_op_bss_info_changed():<0-0> BSS_CHANGED_UN_ASSOC
> [ 659.142725] rtlwifi:rtl_op_bss_info_changed():<0-0> 00:00:00:00:00:00
> [ 659.190740] rtlwifi:rtl_op_set_key():<0-0> Disabling hardware based encryption for keyidx: 1, mac: ff:ff:ff:ff:ff:ff
> [ 659.190744] rtlwifi:rtl_op_set_key():<0-0> alg:TKIP
> [ 659.190747] rtlwifi:rtl_op_set_key():<0-0> set enable_hw_sec, key_type:2(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)
> [ 659.190750] rtlwifi:rtl_op_set_key():<0-0> disable key delete one entry
> [ 659.190753] rtlwifi:rtl_cam_delete_one_entry():<0-0> key_idx:1
> [ 659.190756] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A4: 0
> [ 659.190759] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A0: 80010008
>
>
> After that I reloaded the module and then it is getting worse:
> rtl8192se 0000:03:00.0: Refused to change power state, currently in D3
> rtl8192se:_rtl92se_read_adapter_info():<0-0> RTL819X Not boot from eeprom, check it !!
> tl8192se: FW Power Save off (module option)
> rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
> Loading firmware rtlwifi/rtl8192sefw.bin
> ...
> rtl8192se:_rtl92se_macconfig_after_fwdownload():<0-0> OK
> rtl8192se:rtl92s_phy_bb_config():<0-0> RF_Type(0) does not match RF_Num(4)!!
> rtl8192se:rtl92s_phy_bb_config():<0-0> path1 0xf, path2 0xf, pathmap 0xf
> rtlwifi:rtl_pci_start():<0-0> OK
> rtl8192se:rtl92s_phy_chk_fwcmd_iodone():<0-0> Set FW Cmd fail!!
> rtl8192se:rtl92s_phy_chk_fwcmd_iodone():<0-0> Set FW Cmd fail!!
> rtl8192se:rtl92s_phy_set_rf_power_state():<0-0> IPS Set eRf nic disable
>
> rtl8192se:rtl92s_phy_set_rf_power_state():<0-1> IPS Set eRf nic enable
> rtl8192se:_rtl92se_macconfig_after_fwdownload():<0-1> OK
>
> ...
> rtl8192se:rtl92s_phy_chk_fwcmd_iodone():<0-0> Set FW Cmd fail!!
> rtlwifi:rtl_pci_tx():<200-1> No more TX desc@6, ring->idx = 0, idx = 0, skb_queue_len = 0x0
>
> etc etc.
>
> That is the end, no connection at all, and no way (AFAIS) to get
> it back.
>
> Are there any suggestions, patches, ideas to fix and track that down?
>
> THanks a lot
>
> Norbert
> (please cc)
>
> ------------------------------------------------------------------------
> Norbert Preining preining@{jaist.ac.jp, logic.at, debian.org}
> JAIST, Japan TeX Live & Debian Developer
> DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
> ------------------------------------------------------------------------
> MOTSPUR (n.)
> The fourth wheel of a supermarket trolley which looks identical to the
> other tree but renders the trolley completely uncontrollable.
> MO I RANA Imagine being on a vacation, and it's raining all the time,
> you are driving and the kids are making you a nervous wreck. Well you
> are definitive in Mo i Rana.
> --- Douglas Adams, The Meaning of Liff
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Regards/Gruss,
Boris.
Hi all,
(please cc)
I have now changed my home router and with the new one it
is working without problems at home, and with a few
hickups at work, too.
But still, at work after some time the connection breaks.
I found the following interesting messages in the log:
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [03:00.0] fault addr fff73000
DMAR:[fault reason 06] PTE Read access is not set
around the time the connection hangs and never comes back.
The mentioned device 03:00.0 is the wlan adapter:
$ lspci -v -s 03:00.0
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. Device e020
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at 2000 [size=256]
Memory at f0500000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 88-55-22-fe-ff-4c-e0-00
Kernel driver in use: rtl8192se
$
That is with latest git kernel from yesterday.
Any suggestions would be appreciated.
On Wed, 22 Aug 2012, Norbert Preining wrote:
> Dear all,
>
> (please cc)
>
> I am having serious troubles with my rtl8192se card:
>
> kernel: 3.6.0-rc2+, compiled from git today, same with rc1
> rtl8192se in kernel driver, loaded with debug=3
> Debian sid
> Lenovo Thinkpad Edge
>
> When starting from cold boot, the driver associates, but no packet
> whatsoever leaves the computer it seems, pinging the gateway
> does not return anything, and ns lookups are not working.
>
> In the logs I see many instances of:
> rtlwifi:rtl_tx_agg_start():<0-0> on ra = 00:0a:79:eb:56:10 tid = 6 seq:39
> rtlwifi:rtl_action_proc():<200-1> Tx ACT_ADDBAREQ From :88:9f:fa:f9:07:28
> rtlwifi:rtl_tx_agg_stop():<0-0> on ra = 00:0a:79:eb:56:10 tid = 6
> rtlwifi:rtl_action_proc():<400-1> ACT_ADDBADEL From :88:9f:fa:f9:07:28
> rtlwifi:rtl_action_proc():<10000-1> Rx ACT_ADDBARSP From :00:0a:79:eb:56:10
> in various orders.
>
>
> trying to remove the module gave me:
> [ 649.459652] wlan0: deauthenticating from 00:0a:79:eb:56:10 by local choice (reason=3)
> [ 649.459701] rtlwifi:rtl_tx_agg_stop():<0-0> on ra = 00:0a:79:eb:56:10 tid = 0
> [ 659.094654] rtlwifi:rtl_op_set_key():<0-0> Disabling hardware based encryption for keyidx: 0, mac: 00:0a:79:eb:56:10
> [ 659.094659] rtlwifi:rtl_op_set_key():<0-0> alg:CCMP
> [ 659.094663] rtlwifi:rtl_op_set_key():<0-0> set enable_hw_sec, key_type:4(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)
> [ 659.094667] rtlwifi:rtl_op_set_key():<0-0> disable key delete one entry
> [ 659.094670] rtlwifi:rtl_cam_delete_one_entry():<0-0> key_idx:0
> [ 659.094673] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A4: 0
> [ 659.094676] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A0: 80010000
> [ 659.094719] rtlwifi:rtl_op_sta_remove():<0-0> Remove sta addr is 00:0a:79:eb:56:10
> [ 659.142712] rtlwifi:rtl_op_bss_info_changed():<0-0> BSS_CHANGED_UN_ASSOC
> [ 659.142725] rtlwifi:rtl_op_bss_info_changed():<0-0> 00:00:00:00:00:00
> [ 659.190740] rtlwifi:rtl_op_set_key():<0-0> Disabling hardware based encryption for keyidx: 1, mac: ff:ff:ff:ff:ff:ff
> [ 659.190744] rtlwifi:rtl_op_set_key():<0-0> alg:TKIP
> [ 659.190747] rtlwifi:rtl_op_set_key():<0-0> set enable_hw_sec, key_type:2(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)
> [ 659.190750] rtlwifi:rtl_op_set_key():<0-0> disable key delete one entry
> [ 659.190753] rtlwifi:rtl_cam_delete_one_entry():<0-0> key_idx:1
> [ 659.190756] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A4: 0
> [ 659.190759] rtlwifi:rtl_cam_delete_one_entry():<0-0> rtl_cam_delete_one_entry(): WRITE A0: 80010008
>
>
> After that I reloaded the module and then it is getting worse:
> rtl8192se 0000:03:00.0: Refused to change power state, currently in D3
> rtl8192se:_rtl92se_read_adapter_info():<0-0> RTL819X Not boot from eeprom, check it !!
> tl8192se: FW Power Save off (module option)
> rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
> Loading firmware rtlwifi/rtl8192sefw.bin
> ...
> rtl8192se:_rtl92se_macconfig_after_fwdownload():<0-0> OK
> rtl8192se:rtl92s_phy_bb_config():<0-0> RF_Type(0) does not match RF_Num(4)!!
> rtl8192se:rtl92s_phy_bb_config():<0-0> path1 0xf, path2 0xf, pathmap 0xf
> rtlwifi:rtl_pci_start():<0-0> OK
> rtl8192se:rtl92s_phy_chk_fwcmd_iodone():<0-0> Set FW Cmd fail!!
> rtl8192se:rtl92s_phy_chk_fwcmd_iodone():<0-0> Set FW Cmd fail!!
> rtl8192se:rtl92s_phy_set_rf_power_state():<0-0> IPS Set eRf nic disable
>
> rtl8192se:rtl92s_phy_set_rf_power_state():<0-1> IPS Set eRf nic enable
> rtl8192se:_rtl92se_macconfig_after_fwdownload():<0-1> OK
>
> ...
> rtl8192se:rtl92s_phy_chk_fwcmd_iodone():<0-0> Set FW Cmd fail!!
> rtlwifi:rtl_pci_tx():<200-1> No more TX desc@6, ring->idx = 0, idx = 0, skb_queue_len = 0x0
>
> etc etc.
>
> That is the end, no connection at all, and no way (AFAIS) to get
> it back.
>
> Are there any suggestions, patches, ideas to fix and track that down?
Best wishes
Norbert
----------------------------------------------------------------------------
Norbert Preining preining@{jaist.ac.jp, logic.at, debian.org}
JAIST, Japan TeX Live and Debian Developer
gpg DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094
----------------------------------------------------------------------------
FULKING (participial vb.)
Pretending not to be in when the carol-singers come round.
--- Douglas Adams, The Meaning of Liff