2012-11-14 19:16:25

by John W. Linville

[permalink] [raw]
Subject: pull request: wireless-next 2012-11-14

commit 5bdf502dd9c8fd60dddaabfb9a3dc1671302afd2

Dave,

This pull request is intended for the 3.8 stream...

Included is a Bluetooth pull -- Gustavo says:

"These are the Bluetooth bits for inclusion in 3.8, there is basically one big
thing here which is the High Speed patches from Andrei, he did a lot of work on
A2MP and management of AMP devices. The rest are mostly clean up and bug
fixes."

Also included is an NFC pull -- Samuel says:

"With this one we have:

- pn544 p2p support.
- pn544 physical and HCI layers separation. We are getting the pn544 driver
ready to support non i2c physical layers.
- LLCP SNL (Service Name Lookup). This is the NFC p2p service discovery
protocol.
- LLCP datagram sockets (connection less) support.
- IDR library usage for NFC devices indexes assignement.
- NFC netlink extension for setting and getting LLCP link characteristics.
- Various code style fixes and cleanups spread over the pn533, LLCP, HCI and
pn544 code."

There are a couple of mac80211 pulls as well -- Johannes says:

"Please pull my mac80211-next tree to get the first round of new features
for 3.8. We have:
* finally, the mac80211 multi-channel work
* scan improvements:
- bg scan
- scan flush
- forced AP scan
* cfg80211 tracing
* a bit of new code to allow implementing SAE (secure authentication of
equals) in managed mode

Along with a few random improvements, features and fixes."

and...

"Please pull from mac80211-next (per below pull request) to get a few
updates. Most important is probably the fix for the WDS regression that
my previous pull request introduced. Other than that, I have some
tracing code, two mesh updates and a change to allow drivers to
calculate the AES CMAC subkeys without having to implement the GF_mulx
operation themselves."

On top of that are the usual updates to iwlwifi, ath9k, rt2x00,
brcmfmac, mwifiex, and a few others here and there. Of note is the
addition of the ar5523 driver, ported from an original FreeBSD driver.

Please let me know if there are problems!

Thanks,

John

---

The following changes since commit bf0098f22ca7b59e8844ac6882bbae230d34b98d:

ARM: net: bpf_jit_32: add VLAN instructions for BPF JIT (2012-11-13 18:21:10 -0500)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git for-davem

for you to fetch changes up to 5bdf502dd9c8fd60dddaabfb9a3dc1671302afd2:

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem (2012-11-14 13:33:43 -0500)

----------------------------------------------------------------

Alan Cox (1):
brcm80211: remove some truely barftastic code

Amitkumar Karwar (6):
cfg80211: code rearrangement to avoid forward declarations
mwifiex: use LOW_PRIORITY scan flag provided in scan request
mwifiex: abort scan upon interface down
mwifiex: minor cleanup and a fix in scan semaphore usage
mwifiex: disable channel filtering for SSID specific scan from user
Revert "mwifiex: retrieve correct max_power information in reg_notifier handler"

Andrei Emeltchenko (51):
Bluetooth: Add HCI logical link cmds definitions
Bluetooth: A2MP: Create amp_mgr global list
Bluetooth: AMP: Use HCI cmd to Read AMP Info
Bluetooth: AMP: Use HCI cmd to Read Loc AMP Assoc
Bluetooth: A2MP: Process Discover Response
Bluetooth: AMP: Physical link struct and helpers
Bluetooth: AMP: Remote AMP ctrl definitions
Bluetooth: AMP: Handle create / disc phylink req
Bluetooth: A2MP: Process A2MP Getinfo Rsp
Bluetooth: A2MP: Process A2MP Get AMP Assoc Rsp
Bluetooth: Choose connection based on capabilities
Bluetooth: AMP: Add AMP key calculation
Bluetooth: AMP: Create Physical Link
Bluetooth: AMP: Write remote AMP Assoc
Bluetooth: A2MP: Add fallback to normal l2cap init sequence
Bluetooth: AMP: Process Chan Selected event
Bluetooth: AMP: Accept Physical Link
Bluetooth: AMP: Handle Accept phylink command status evt
Bluetooth: Use %pMR in debug instead of batostr
Bluetooth: Use %pMR in sprintf/seq_printf instead of batostr
Bluetooth: Use %pMR instead of baswap in seq_show
bluetooth: Remove unneeded batostr function
Bluetooth: Factor out hci_queue_acl
Bluetooth: Factor out Create Configuration Response
Bluetooth: Use %zu print specifier for size_t type
Bluetooth: A2MP: Correct assoc_len size
Bluetooth: btmrvl: Correct num_block name
Bluetooth: btmrvl: Use DIV_ROUND_UP macro
Bluetooth: btmrvl: Fix skb buffer overflow
Bluetooth: A2MP: Fix potential NULL dereference
Bluetooth: AMP: Fix possible NULL dereference
Bluetooth: Fix dereference after NULL check
Bluetooth: AMP: Factor out amp_ctrl_add
Bluetooth: AMP: Factor out phylink_add
Bluetooth: AMP: Use block_mtu for AMP controller
Bluetooth: Adjust L2CAP Max PDU size for AMP packets
Bluetooth: L2CAP: Fix using default Flush Timeout for EFS
Bluetooth: btmrv: Use %*ph specifier instead of print_hex_dump_bytes
Bluetooth: Allow to set flush timeout
Bluetooth: AMP: Handle AMP_LINK timeout
Bluetooth: AMP: Add handle to hci_chan structure
Bluetooth: AMP: Handle number of compl blocks for AMP_LINK
Bluetooth: AMP: Handle AMP_LINK connection
Bluetooth: AMP: Hanlde AMP_LINK case in conn_put
Bluetooth: AMP: Use Loglink handle in ACL Handle field
Bluetooth: AMP: Handle complete frames in l2cap
Bluetooth: AMP: Drop packets when no l2cap conn exist
Bluetooth: Send EFS Conf Rsp only for BR/EDR chan
Bluetooth: Zero bredr pointer when chan is deleted
Bluetooth: AMP: Get amp_mgr reference in HS hci_conn
mwifiex: Using %*phD instead of print_hex_dump_bytes

Andy Shevchenko (1):
rtlwifi: rtl8192ce: rtl8192cu: use %*phC to dump small buffers

Antonio Quartulli (1):
nl/cfg80211: force scan using an AP vif if requested

Arend van Spriel (23):
wireless: drivers: make use of WLAN_EID_VENDOR_SPECIFIC
wireless: gelic: make use of WLAN_EID_VENDOR_SPECIFIC
wireless: remove duplicate enum ieee80211_eid definitions
brcmfmac: remove 'always false' condition from brcmf_c_mkiovar_bsscfg
brcmfmac: extend struct brcmf_if with bssidx field
brcmfmac: rework driver initialization in brcmf_bus_start()
brcmfmac: use bssidx from struct brcmf_if for bsscfg specific commands
brcmfmac: add function converting ieee80211_channel to chanspec
brcmfmac: use struct brcmf_if as interface object for fwil functions
brcmfmac: change parameter list for send_key_to_dongle()
brcmfmac: remove brcmf_find_bssidx() function
brcmfmac: introduce brcmf_cfg80211_vif structure
brcmfmac: store profile information per virtual interface
brcmfmac: use vif struct to check_sys_up() function
brcmfmac: separate connection status from scanning status
brcmfmac: remove debugfs functionality from wl_cfg80211.c
brcmfmac: cleanup brcmf_cfg80211_profile structure
brcmfmac: remove unused enumeration wl_prof_list
brcmfmac: rename check_sys_up() to check_vif_up()
brcmfmac: use memset when setting a broadcast mac address
brcmfmac: add virtual interface support in brcmf_cfg80211_suspend()
brcmfmac: remove unnecessary macro usage in brcmf_cfg80211_resume()
brcmfmac: store IEs per virtual interface

Arron Wang (7):
NFC: Set local gb and DEP registries
NFC: Pass hardware specific HCI event to driver
NFC: Handle pn544 continue activation
NFC: Implement HCI DEP link up and down
NFC: Implement HCI DEP send and receive data
NFC: Add pn544 presence check for different targets
NFC: Fix sparse warnings due to missing static

Ashok Nagarajan (1):
mac80211: move out the non-statistics variable estab_plinks from mesh_stat

Assaf Krauss (1):
mac80211: expose AES-CMAC subkey calculation

Avinash Patil (2):
mwifiex: handle extended supported rates IE for AP
mwifiex: rx path enhancement to derive priv only once

Bala Shanmugam (2):
ath9k: Set appropriate bit for AR9565 in btc control register
ath9k: turn off RXIQ calibration while re-calibrating radio

Beni Lev (2):
cfg80211: add tracing to rdev-ops
cfg80211: add cfg80211 exported function tracing

Bing Zhao (1):
mwifiex: use sizeof(array) to print_hex_dump_bytes

Christian Lamparter (3):
carl9170: handle traps from firmware loader
carl9170: fix spurious transmissions in sniffer mode
carl9170: split up carl9170_handle_mpdu

Dan Carpenter (3):
orinoco_usb: clean up some signedness issues
brcmfmac: Using zero instead of NULL
ar5523: make buffer size variable unsigned

Dmitry Kasatkin (1):
Bluetooth: Add function to derive AMP key using hmac

Emmanuel Grumbach (5):
iwlwifi: wipe out the status of the SCD when we disable a queue
iwlwifi: use the new macro for the SCD Q STTS bits
iwlwifi: first deactivate a queue, then wipe out its data
iwlwifi: don't print the Intel banner twice
iwlwifi: don't WARN when a non empty queue is disabled

Eric Lapuyade (2):
NFC: HCI check presence must not fail when driver doesn't support it
NFC: Separate pn544 hci driver in HW dependant and independant parts

Franky Lin (2):
brcmfmac: fix sparse warnings
brcmfmac: streamline header parse code of sdio glom read

Gustavo Padovan (9):
Bluetooth: Fix two warnings in BT_DBG
Bluetooth: Fix L2CAP coding style
Bluetooth: Remove GFP_ATOMIC usage from l2cap_core.c
Bluetooth: use l2cap_chan_set_err()
Bluetooth: Use locked l2cap_state_change()
Bluetooth: Call ops->teardown() without checking for NULL
Bluetooth: Move bt_accept_enqueue() to l2cap_sock.c
Bluetooth: Add chan->ops->defer()
Bluetooth: Rename __l2cap_connect() to l2cap_connect()

Hante Meuleman (6):
brcmfmac: refactor firmware interface layer.
brcmfmac: remove unused iswl variable.
brcmfmac: change testmode command to use new firmware interface layer
brcmfmac: remove redundant function brcmf_c_mkiovar_bsscfg
brcmfmac: clean usb download code.
brcmfmac: use fwil for default configuration setup.

Hauke Mehrtens (14):
bcma: just do the necessary things in early register on SoCs
bcma: init sprom struct earlier
bcma: mark pflash as present when available
bcma: add and use constants for the flash windows
bcma: mark nflash if it is the boot flash
bcma: extract drv_cc in bcma_core_mips_flash_detect()
bcma: add some more flash chips for serial flash
ssb: move parallel flash config into an own struct
ssb: add attribute to indicate a parallel flash is available
bcma: use fallback sprom if sprom on card was not valid
bcma: add an extra pcie core struct
bcma: do not initialize deactivated PCIe cores
ssb: add PCI ID 0x4350
ssb: handle BCM43222 in pmu code.

Hila Gonen (1):
cfg80211: add wrappers for registered_device_ops

Jefferson Delfes (1):
Bluetooth: Force the process of unpair command if disconnect failed

Johannes Berg (16):
iwlwifi: improve oversized command warning
iwlwifi: make data frame tracing optional
iwlwifi: remove unused variables
mac80211: check channel context methods
mac80211: track whether to use channel contexts
mac80211: use channel contexts
mac80211: track needed RX chains for channel contexts
mac80211: add channel context iterator
wireless: use OR operation to set wiphy features
mac80211: remove unimplemented mesh vendor sync
mac80211: remove some unused code
mac80211: use __printf attribute in debugfs
mac80211: fix WDS channel context test
cfg80211: add tracing for P2P Device start/stop
mac80211: use non-atomic bitmap operation for local variable
mac80211: complete bss_info tracing

John W. Linville (8):
Merge branch 'master' of git://git.kernel.org/.../bluetooth/bluetooth-next
Merge branch 'for-john' of git://git.kernel.org/.../jberg/mac80211-next
Merge branch 'for-john' of git://git.kernel.org/.../iwlwifi/iwlwifi-next
Merge branch 'master' of git://git.kernel.org/.../linville/wireless
Merge branch 'for-john' of git://git.kernel.org/.../jberg/mac80211-next
Merge tag 'nfc-next-3.8-1' of git://git.kernel.org/.../sameo/nfc-3.0
Merge branch 'master' of git://git.kernel.org/.../linville/wireless
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-next into for-davem

Jouni Malinen (4):
mac80211: Take status code as parameter to ieee80211_send_auth
mac80211: Add debug print on unexpect authentication state
cfg80211: Allow user space to specify non-IEs to SAE Authentication
mac80211: Allow station mode SAE to be implemented in user space

Kees Cook (3):
NFC: Remove CONFIG_EXPERIMENTAL
NFC: Remove CONFIG_EXPERIMENTAL from the LLCP Makefile
NFC: Remove CONFIG_EXPERIMENTAL from the NCI Makefile

Larry Finger (2):
rtlwifi: rtl8192c: rtl8192ce: Add support for B-CUT version of RTL8188CE
rtlwifi: rtl8192c: rtl8192ce: rtl8192cu: rtl8192se: rtl8192de: Shorten some variable names

Mahesh Palivela (3):
ieee80211: Rename VHT cap struct
mac80211: VHT peer STA caps
{nl,cfg}80211: Peer STA VHT caps

Marco Porsch (2):
mac80211: fix copy-paste typo in Kconfig
mac80211: make client powersave independent of interface type

Mat Martineau (2):
Bluetooth: Process create response and connect response identically
Bluetooth: Factor out common L2CAP connection code

Michal Kazior (4):
mac80211: introduce channel context skeleton code
mac80211: introduce new ieee80211_ops
mac80211: use channel context notifications
mac80211: reuse channels for channel contexts

Mohammed Shafi Shajakhan (5):
mac80211: Use appropriate debug wrapper
ath9k: Ensure we set FTP_STOMP_LOW weight when WLAN is idle
ath9k_htc: Advertise interface combinations supported
ath9k_htc: Remove interface combination specific checks
ath9k: Advertize beacon_int_infra_match

Peter Senna Tschudin (1):
ath/ath9k/ar9003_eeprom.c: Remove semicolon after if

Pontus Fuchs (1):
ar5523: Add new driver

Rajkumar Manoharan (19):
ath9k: perform ANI cycle in idle state
ath9k: Send WLAN channel info to BT
ath9k: Add concurrent WLAN and BT tx support for MCI based chips
ath9k: fill channel mode in caldata
ath9k: adjust WLAN and BT concurrent transmission
ath9k_hw: Enable OSLA hw fix for AR9565
ath9k_hw: Fix selfgen chainmask for 9565
ath9k_hw: Disable MCI stat counter by default for AR9565
ath9k_hw: Fix frequent BT rx recovery
ath9k_hw: Fix max rx rate drop for AR9565
ath9k_hw: Configure new switch table for AR9565 BTCOEX
ath9k_hw: Set default MCI config for AR9565
ath9k: adjust duty cycle for FTP profile for AR9565
ath9k: Add new BT profile info A2DP_Voice
ath9k_hw: Enable hw PLL power save for AR9462
ath9k_hw: Enable hw PLL power save for AR9565
ath9k_hw: Fix concurrent tx on lower tx power
ath9k_hw: validate MCI stuck after RTC wakeup
ath9k: Dump BTCOEX tuning parameters

Rami Rosen (2):
Bluetooth: remove unused member of hci_dev.
mac80211: remove duplicate check in ieee80211_rx_mgmt_beacon

Sam Leffler (4):
{nl,cfg}80211: add a flags word to scan requests
cfg80211: add scan flag to indicate its priority
cfg80211: add support for flushing old scan results
mac80211: add support for tx to abort low priority scan requests

Samuel Ortiz (14):
NFC: Avoid falling back to SYMM when sk is NULL
NFC: Use llcp_allocate_pdu to build the DISC frames
NFC: Add SNL frame building routine
NFC: Initial SNL support
NFC: Reserve LLCP ssap when replying to an SNL frame
NFC: Check for connection less sockets when looking for a service name
NFC: Keep connection less bound sockets alive when DEP link goes down
NFC: Handle LLCP UI frames
NFC: Forward LLCP datagrams to userspace
NFC: UI frame sending routine implementation
NFC: Implement LLCP connection less Tx path
NFC: Return NULL when no LLCP socket for a dsap,ssap couple is found
NFC: Use IDR library to assing NFC devices IDs
NFC: Purge LLCP socket Tx queues when being disconnected

Sasha Levin (1):
Bluetooth: don't attempt to free a channel that wasn't created

Stanislaw Gruszka (7):
rt2800: use BBP_R1 for setting tx power
rt2800: limit TX_PWR_CFG_ values to 0xc
rt2800: compensate tx power also for non 11b rates on 2GHz
rt2800: use eeprom OFDM 6M TX power as criterion
rt2800: pass channel pointer to rt2800_config_txpower
rt2800: allow to reduce tx power on devices not exporting power limit
rt2800: comment tx power settings

Sujith Manoharan (4):
mac80211: Notify new IBSS network creation
cfg80211: Disallow HT/WEP in IBSS mode
ath9k: Use a helper routine for MCI/FTP tuning
ath9k: Fix BT_OP_SCAN usage

Sven Eckelmann (1):
ath_hw: Use common REG_WRITE parameter order

Syam Sidhardhan (2):
Bluetooth: Use __constant modifier for L2CAP SMP CID
Bluetooth: Use __constant modifier for RFCOMM PSM

Szymon Janc (7):
NFC: Use NFC_MAX_GT_LEN to check len in nci_set_local_general_bytes
NFC: Remove not needed local variable in nci_set_local_general_bytes
NFC: Remove unneeded LLCP function return calls
NFC: Small nfc_hci_create_pipe refactoring
NFC: Fix not propagating return code in nfc_hci_clear_all_pipes
NFC: Fix style issues with logical operations
NFC: Fix some code style and whitespace issues

Thierry Escande (3):
NFC: Set rf_mode to NFC_RF_NONE where necessary
NFC: Add NFC_ATTR_RF_MODE when sending device netlink properties
NFC: Extend netlink interface for LTO, RW, and MIUX parameters support

Thomas Pedersen (1):
mac80211: mesh STAs only process mesh beacons

Waldemar Rymarkiewicz (2):
NFC: pn533: Fix in/out frame buffer allocation
NFC: pn533: Remove unused arg parameter

Yuanhan Liu (1):
bcma: suspend/resume callbacks should be conditionally compiled on CONFIG_PM_SLEEP

MAINTAINERS | 6 +
arch/mips/bcm47xx/nvram.c | 4 +-
arch/mips/bcm47xx/wgt634u.c | 8 +-
drivers/bcma/driver_chipcommon.c | 23 +-
drivers/bcma/driver_chipcommon_nflash.c | 3 +
drivers/bcma/driver_chipcommon_pmu.c | 5 +-
drivers/bcma/driver_chipcommon_sflash.c | 35 +-
drivers/bcma/driver_mips.c | 48 +-
drivers/bcma/driver_pci_host.c | 14 +-
drivers/bcma/host_pci.c | 6 +-
drivers/bcma/main.c | 54 +-
drivers/bcma/sprom.c | 5 +-
drivers/bluetooth/btmrvl_sdio.c | 28 +-
drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 4 +-
drivers/net/wireless/airo.c | 2 +-
drivers/net/wireless/ath/Kconfig | 1 +
drivers/net/wireless/ath/Makefile | 1 +
drivers/net/wireless/ath/ar5523/Kconfig | 7 +
drivers/net/wireless/ath/ar5523/Makefile | 1 +
drivers/net/wireless/ath/ar5523/ar5523.c | 1806 +++++++++++++++
drivers/net/wireless/ath/ar5523/ar5523.h | 152 ++
drivers/net/wireless/ath/ar5523/ar5523_hw.h | 431 ++++
drivers/net/wireless/ath/ath6kl/cfg80211.c | 4 +-
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 5 +
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 22 +-
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 8 +-
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 70 +-
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 8 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.h | 1 +
.../net/wireless/ath/ath9k/ar9565_1p0_initvals.h | 4 +-
drivers/net/wireless/ath/ath9k/ath9k.h | 9 +
drivers/net/wireless/ath/ath9k/btcoex.c | 62 +-
drivers/net/wireless/ath/ath9k/btcoex.h | 7 +
drivers/net/wireless/ath/ath9k/calib.c | 1 +
drivers/net/wireless/ath/ath9k/debug.c | 34 +-
drivers/net/wireless/ath/ath9k/gpio.c | 110 +-
drivers/net/wireless/ath/ath9k/htc_drv_init.c | 17 +
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 20 -
drivers/net/wireless/ath/ath9k/hw.c | 6 +-
drivers/net/wireless/ath/ath9k/hw.h | 2 +
drivers/net/wireless/ath/ath9k/init.c | 1 +
drivers/net/wireless/ath/ath9k/link.c | 12 +-
drivers/net/wireless/ath/ath9k/main.c | 12 +-
drivers/net/wireless/ath/ath9k/mci.c | 171 +-
drivers/net/wireless/ath/ath9k/mci.h | 36 +
drivers/net/wireless/ath/ath9k/recv.c | 5 +-
drivers/net/wireless/ath/ath9k/reg.h | 13 +-
drivers/net/wireless/ath/ath9k/wow.c | 2 +-
drivers/net/wireless/ath/carl9170/mac.c | 21 +-
drivers/net/wireless/ath/carl9170/rx.c | 51 +-
drivers/net/wireless/ath/carl9170/usb.c | 7 +
drivers/net/wireless/ath/hw.c | 20 +-
drivers/net/wireless/b43/main.c | 2 +-
drivers/net/wireless/brcm80211/brcmfmac/Makefile | 1 +
drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 73 +-
drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h | 3 -
drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 29 -
.../net/wireless/brcm80211/brcmfmac/dhd_common.c | 453 ++--
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c | 2 +
drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h | 3 +
.../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 198 +-
.../net/wireless/brcm80211/brcmfmac/dhd_proto.h | 8 +-
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 174 +-
drivers/net/wireless/brcm80211/brcmfmac/fwil.c | 336 +++
drivers/net/wireless/brcm80211/brcmfmac/fwil.h | 39 +
drivers/net/wireless/brcm80211/brcmfmac/usb.c | 41 +-
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 1218 +++++------
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.h | 145 +-
drivers/net/wireless/brcm80211/brcmsmac/aiutils.c | 4 +-
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
drivers/net/wireless/hostap/hostap_80211_rx.c | 2 +-
drivers/net/wireless/ipw2x00/libipw_rx.c | 6 +-
drivers/net/wireless/iwlwifi/dvm/main.c | 9 +-
drivers/net/wireless/iwlwifi/iwl-devtrace.h | 95 +-
drivers/net/wireless/iwlwifi/iwl-io.c | 4 +-
drivers/net/wireless/iwlwifi/iwl-io.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-prph.h | 3 +
drivers/net/wireless/iwlwifi/iwl-trans.h | 8 +
drivers/net/wireless/iwlwifi/pcie/rx.c | 3 +-
drivers/net/wireless/iwlwifi/pcie/trans.c | 9 +-
drivers/net/wireless/iwlwifi/pcie/tx.c | 18 +-
drivers/net/wireless/libertas/mesh.c | 2 +-
drivers/net/wireless/mwifiex/11n_rxreorder.c | 8 +-
drivers/net/wireless/mwifiex/cfg80211.c | 20 +-
drivers/net/wireless/mwifiex/cmdevt.c | 21 +-
drivers/net/wireless/mwifiex/init.c | 19 +-
drivers/net/wireless/mwifiex/main.c | 8 +
drivers/net/wireless/mwifiex/main.h | 13 +-
drivers/net/wireless/mwifiex/scan.c | 55 +-
drivers/net/wireless/mwifiex/sta_cmdresp.c | 4 -
drivers/net/wireless/mwifiex/sta_ioctl.c | 4 +-
drivers/net/wireless/mwifiex/sta_rx.c | 26 +-
drivers/net/wireless/mwifiex/txrx.c | 10 +-
drivers/net/wireless/mwifiex/uap_cmd.c | 11 +-
drivers/net/wireless/mwifiex/uap_txrx.c | 17 +-
drivers/net/wireless/mwifiex/util.c | 19 +-
drivers/net/wireless/orinoco/main.h | 2 +-
drivers/net/wireless/orinoco/orinoco_usb.c | 9 +-
drivers/net/wireless/rt2x00/rt2800lib.c | 100 +-
drivers/net/wireless/rtlwifi/cam.c | 7 +-
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c | 227 +-
drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c | 88 +-
drivers/net/wireless/rtlwifi/rtl8192ce/def.h | 3 +
drivers/net/wireless/rtlwifi/rtl8192ce/dm.c | 30 +-
drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 93 +-
drivers/net/wireless/rtlwifi/rtl8192ce/phy.c | 2 +
drivers/net/wireless/rtlwifi/rtl8192ce/rf.c | 23 +-
drivers/net/wireless/rtlwifi/rtl8192ce/sw.c | 6 +-
drivers/net/wireless/rtlwifi/rtl8192ce/trx.c | 46 +-
drivers/net/wireless/rtlwifi/rtl8192cu/dm.c | 30 +-
drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 16 +-
drivers/net/wireless/rtlwifi/rtl8192cu/mac.c | 25 +-
drivers/net/wireless/rtlwifi/rtl8192cu/rf.c | 22 +-
drivers/net/wireless/rtlwifi/rtl8192de/dm.c | 95 +-
drivers/net/wireless/rtlwifi/rtl8192de/phy.c | 65 +-
drivers/net/wireless/rtlwifi/rtl8192de/rf.c | 18 +-
drivers/net/wireless/rtlwifi/rtl8192de/trx.c | 39 +-
drivers/net/wireless/rtlwifi/rtl8192se/dm.c | 89 +-
drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 6 +-
drivers/net/wireless/rtlwifi/rtl8192se/phy.c | 64 +-
drivers/net/wireless/rtlwifi/rtl8192se/rf.c | 11 +-
drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 21 +-
drivers/net/wireless/rtlwifi/wifi.h | 53 +-
drivers/nfc/Makefile | 2 +-
drivers/nfc/pn533.c | 18 +-
drivers/nfc/pn544/Makefile | 7 +
drivers/nfc/pn544/i2c.c | 500 +++++
drivers/nfc/{pn544_hci.c => pn544/pn544.c} | 679 +++---
drivers/nfc/pn544/pn544.h | 32 +
drivers/ssb/b43_pci_bridge.c | 1 +
drivers/ssb/driver_chipcommon_pmu.c | 3 +
drivers/ssb/driver_mipscore.c | 16 +-
include/linux/bcma/bcma.h | 2 +-
include/linux/bcma/bcma_driver_chipcommon.h | 5 +
include/linux/bcma/bcma_driver_mips.h | 3 +
include/linux/bcma/bcma_regs.h | 5 +-
include/linux/ieee80211.h | 47 +-
include/linux/ssb/ssb_driver_mips.h | 10 +-
include/net/bluetooth/a2mp.h | 24 +-
include/net/bluetooth/amp.h | 50 +
include/net/bluetooth/bluetooth.h | 1 -
include/net/bluetooth/hci.h | 40 +-
include/net/bluetooth/hci_core.h | 48 +-
include/net/bluetooth/l2cap.h | 14 +-
include/net/cfg80211.h | 14 +
include/net/mac80211.h | 114 +-
include/net/nfc/hci.h | 18 +-
include/net/nfc/nfc.h | 2 +-
include/uapi/linux/nfc.h | 15 +
include/uapi/linux/nl80211.h | 48 +
net/bluetooth/Kconfig | 1 +
net/bluetooth/Makefile | 2 +-
net/bluetooth/a2mp.c | 459 +++-
net/bluetooth/af_bluetooth.c | 10 +-
net/bluetooth/amp.c | 374 ++++
net/bluetooth/bnep/core.c | 3 +-
net/bluetooth/cmtp/core.c | 2 +-
net/bluetooth/hci_conn.c | 70 +-
net/bluetooth/hci_core.c | 65 +-
net/bluetooth/hci_event.c | 167 +-
net/bluetooth/hci_sysfs.c | 10 +-
net/bluetooth/hidp/core.c | 8 +-
net/bluetooth/l2cap_core.c | 503 +++--
net/bluetooth/l2cap_sock.c | 89 +-
net/bluetooth/lib.c | 14 -
net/bluetooth/mgmt.c | 5 +-
net/bluetooth/rfcomm/core.c | 19 +-
net/bluetooth/rfcomm/sock.c | 9 +-
net/bluetooth/rfcomm/tty.c | 6 +-
net/bluetooth/sco.c | 12 +-
net/bluetooth/smp.c | 2 +-
net/mac80211/Kconfig | 2 +-
net/mac80211/Makefile | 1 +
net/mac80211/aes_cmac.c | 17 +
net/mac80211/cfg.c | 284 +--
net/mac80211/chan.c | 455 +++-
net/mac80211/debugfs.h | 6 +-
net/mac80211/debugfs_netdev.c | 10 +-
net/mac80211/driver-ops.h | 65 +
net/mac80211/ibss.c | 88 +-
net/mac80211/ieee80211_i.h | 171 +-
net/mac80211/iface.c | 44 +-
net/mac80211/main.c | 105 +-
net/mac80211/mesh.c | 52 +-
net/mac80211/mesh.h | 4 +-
net/mac80211/mesh_plink.c | 14 +-
net/mac80211/mesh_sync.c | 55 +-
net/mac80211/mlme.c | 228 +-
net/mac80211/offchannel.c | 9 +-
net/mac80211/pm.c | 2 +
net/mac80211/rate.h | 12 +-
net/mac80211/rx.c | 32 +-
net/mac80211/scan.c | 29 +-
net/mac80211/sta_info.c | 59 +-
net/mac80211/status.c | 15 +-
net/mac80211/trace.h | 146 +-
net/mac80211/tx.c | 281 ++-
net/mac80211/util.c | 145 +-
net/mac80211/vht.c | 35 +
net/nfc/Kconfig | 4 +-
net/nfc/core.c | 33 +-
net/nfc/hci/command.c | 24 +-
net/nfc/hci/core.c | 71 +-
net/nfc/hci/llc.c | 2 +-
net/nfc/hci/llc_shdlc.c | 7 +-
net/nfc/llcp/Kconfig | 4 +-
net/nfc/llcp/commands.c | 120 +-
net/nfc/llcp/llcp.c | 226 +-
net/nfc/llcp/llcp.h | 13 +
net/nfc/llcp/sock.c | 42 +-
net/nfc/nci/Kconfig | 4 +-
net/nfc/nci/core.c | 29 +-
net/nfc/netlink.c | 157 +-
net/nfc/nfc.h | 6 +
net/nfc/rawsock.c | 1 -
net/wireless/Makefile | 4 +-
net/wireless/ap.c | 3 +-
net/wireless/chan.c | 16 +-
net/wireless/core.c | 16 +-
net/wireless/core.h | 6 +-
net/wireless/ethtool.c | 15 +-
net/wireless/ibss.c | 9 +-
net/wireless/mesh.c | 11 +-
net/wireless/mlme.c | 92 +-
net/wireless/nl80211.c | 259 ++-
net/wireless/rdev-ops.h | 879 ++++++++
net/wireless/scan.c | 138 +-
net/wireless/sme.c | 12 +-
net/wireless/sysfs.c | 5 +-
net/wireless/trace.c | 7 +
net/wireless/trace.h | 2296 ++++++++++++++++++++
net/wireless/util.c | 14 +-
net/wireless/wext-compat.c | 48 +-
233 files changed, 13900 insertions(+), 4289 deletions(-)
create mode 100644 drivers/net/wireless/ath/ar5523/Kconfig
create mode 100644 drivers/net/wireless/ath/ar5523/Makefile
create mode 100644 drivers/net/wireless/ath/ar5523/ar5523.c
create mode 100644 drivers/net/wireless/ath/ar5523/ar5523.h
create mode 100644 drivers/net/wireless/ath/ar5523/ar5523_hw.h
create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/fwil.c
create mode 100644 drivers/net/wireless/brcm80211/brcmfmac/fwil.h
create mode 100644 drivers/nfc/pn544/Makefile
create mode 100644 drivers/nfc/pn544/i2c.c
rename drivers/nfc/{pn544_hci.c => pn544/pn544.c} (58%)
create mode 100644 drivers/nfc/pn544/pn544.h
create mode 100644 include/net/bluetooth/amp.h
create mode 100644 net/bluetooth/amp.c
create mode 100644 net/mac80211/vht.c
create mode 100644 net/wireless/rdev-ops.h
create mode 100644 net/wireless/trace.c
create mode 100644 net/wireless/trace.h
--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.


Attachments:
(No filename) (33.36 kB)
(No filename) (836.00 B)
Download all attachments

2012-11-15 03:07:33

by David Miller

[permalink] [raw]
Subject: Re: pull request: wireless-next 2012-11-14

From: "John W. Linville" <[email protected]>
Date: Wed, 14 Nov 2012 14:05:11 -0500

> This pull request is intended for the 3.8 stream...

Pulled, thanks John.