2013-01-04 21:00:16

by John W. Linville

[permalink] [raw]
Subject: pull request: wireless 2013-01-04

Dave,

This is a batch of fixes intended for 3.8.

Arend "fixes" a copyright notice in brcmsmac -- seems harmless.

Christian Lamparter adds a device ID to p54usb, and changes the
interface combinations reported by carl9170 in order to get it
working again.

Geert Uytterhoeven gives us a pair of fixes for Kconfig warnings
about bcma and ssb.

Hante Meuleman fixes some IE parsing to get AP mode working with
WPA2 security.

Jesper Juhl fixes a urb leak in rtlwifi.

Jussi Kivilinna fixes some mis-usage of usb_alloc_coherent in rtlwifi,
avoiding a BUG on ARM.

Larry Finger provides a handful of rtlwifi fixes to avoid some log
SPAM due to not checking the return of pci_map_single.

Niels Ole Salscheider changes a usleep_range in brcmsmac to use udelay
instead, avoiding a "BUG: scheduling while atomic".

Rafał Miłecki fixes an ID for a serial flash in the bcma code.

Sujith Manoharan provides a pair of ath9k fixes, one for a compilation
break and one to correct some gain-related initvals.

Tomasz Guszkowski adds a device ID to p54usb.

Vladimir Kondratiev fixes a Kconfig problem which cause ath9k_htc
not to build properly.

Please let me know if there are problems!

Thanks,

John

---

The following changes since commit fdb184d1467f9ed5b17c553b85eb1bb72bdbf62f:

bridge: add empty br_mdb_init() and br_mdb_uninit() definitions. (2013-01-03 03:35:22 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem

for you to fetch changes up to 7b87e573413c3d6a006f572fb4d2105ff5d97fda:

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem (2013-01-04 15:22:52 -0500)

----------------------------------------------------------------

Arend van Spriel (1):
brcmsmac: add copyright information for Canonical

Christian Lamparter (2):
carl9170: fix -EINVAL bailout during init with !CONFIG_MAC80211_MESH
p54usb: add USBIDs for two more p54usb devices

Geert Uytterhoeven (2):
bcma: BCMA_DRIVER_GPIO should depend on GPIOLIB instead of selecting it
ssb: SSB_DRIVER_GPIO should depend on GPIOLIB instead of selecting it

Hante Meuleman (1):
brcmfmac: fix parsing rsn ie for ap mode.

Jesper Juhl (1):
rtlwifi: Don't leak on error in _rtl_usb_receive()

John W. Linville (1):
Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem

Jussi Kivilinna (1):
rtlwifi: fix incorrect use of usb_alloc_coherent with usb_control_msg

Larry Finger (5):
rtlwifi: Fix warning for unchecked pci_map_single() call
rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call
rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call
rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call
rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call

Niels Ole Salscheider (1):
brcmsmac: Use udelay instead of usleep_range

Rafał Miłecki (1):
bcma: correct M25P32 serial flash ID

Sujith Manoharan (2):
ath9k: Fix compilation breakage
ath9k_hw: Fix RX gain initvals for AR9485

Tomasz Guszkowski (1):
p54usb: add USB ID for T-Com Sinus 154 data II

Vladimir Kondratiev (1):
ath9k: Fix Kconfig for ATH9K_HTC

drivers/bcma/Kconfig | 3 +--
drivers/bcma/driver_chipcommon_sflash.c | 2 +-
drivers/net/wireless/ath/ath9k/Kconfig | 5 +++--
drivers/net/wireless/ath/ath9k/ar9003_hw.c | 2 +-
drivers/net/wireless/ath/carl9170/fw.c | 6 +++++-
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 5 +++--
drivers/net/wireless/brcm80211/brcmsmac/debug.h | 1 +
drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c | 4 ++--
drivers/net/wireless/p54/p54usb.c | 4 ++++
drivers/net/wireless/rtlwifi/pci.c | 6 ++++++
drivers/net/wireless/rtlwifi/rtl8192ce/trx.c | 11 +++++++++++
drivers/net/wireless/rtlwifi/rtl8192de/trx.c | 10 ++++++++++
drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 13 ++++++++++++-
drivers/net/wireless/rtlwifi/rtl8723ae/trx.c | 10 ++++++++++
drivers/net/wireless/rtlwifi/usb.c | 8 ++++----
drivers/ssb/Kconfig | 3 +--
16 files changed, 75 insertions(+), 18 deletions(-)

diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
index d7b56a8..8b4221c 100644
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -67,8 +67,7 @@ config BCMA_DRIVER_GMAC_CMN

config BCMA_DRIVER_GPIO
bool "BCMA GPIO driver"
- depends on BCMA
- select GPIOLIB
+ depends on BCMA && GPIOLIB
help
Driver to provide access to the GPIO pins of the bcma bus.

diff --git a/drivers/bcma/driver_chipcommon_sflash.c b/drivers/bcma/driver_chipcommon_sflash.c
index 63e6883..1e694db 100644
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -35,7 +35,7 @@ static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
{ "M25P40", 0x12, 0x10000, 8, },

{ "M25P16", 0x14, 0x10000, 32, },
- { "M25P32", 0x14, 0x10000, 64, },
+ { "M25P32", 0x15, 0x10000, 64, },
{ "M25P64", 0x16, 0x10000, 128, },
{ "M25FL128", 0x17, 0x10000, 256, },
{ 0 },
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 5fc15bf..7647ed6 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -2,6 +2,7 @@ config ATH9K_HW
tristate
config ATH9K_COMMON
tristate
+ select ATH_COMMON
config ATH9K_DFS_DEBUGFS
def_bool y
depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
@@ -17,7 +18,6 @@ config ATH9K_BTCOEX_SUPPORT
config ATH9K
tristate "Atheros 802.11n wireless cards support"
depends on MAC80211
- select ATH_COMMON
select ATH9K_HW
select MAC80211_LEDS
select LEDS_CLASS
@@ -56,7 +56,8 @@ config ATH9K_AHB

config ATH9K_DEBUGFS
bool "Atheros ath9k debugging"
- depends on ATH9K && DEBUG_FS
+ depends on ATH9K
+ select MAC80211_DEBUGFS
---help---
Say Y, if you need access to ath9k's statistics for
interrupts, rate control, etc.
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 74fd397..59bf5f3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -544,7 +544,7 @@ static void ar9003_rx_gain_table_mode0(struct ath_hw *ah)
ar9340Common_rx_gain_table_1p0);
else if (AR_SREV_9485_11(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
- ar9485Common_wo_xlna_rx_gain_1_1);
+ ar9485_common_rx_gain_1_1);
else if (AR_SREV_9550(ah)) {
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar955x_1p0_common_rx_gain_table);
diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c
index aaebecd..63fd9af 100644
--- a/drivers/net/wireless/ath/carl9170/fw.c
+++ b/drivers/net/wireless/ath/carl9170/fw.c
@@ -336,8 +336,12 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len)
if (SUPP(CARL9170FW_WLANTX_CAB)) {
if_comb_types |=
BIT(NL80211_IFTYPE_AP) |
- BIT(NL80211_IFTYPE_MESH_POINT) |
BIT(NL80211_IFTYPE_P2P_GO);
+
+#ifdef CONFIG_MAC80211_MESH
+ if_comb_types |=
+ BIT(NL80211_IFTYPE_MESH_POINT);
+#endif /* CONFIG_MAC80211_MESH */
}
}

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 1261a9b..75464ad 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3091,10 +3091,11 @@ brcmf_configure_wpaie(struct net_device *ndev, struct brcmf_vs_tlv *wpa_ie,

len = wpa_ie->len + TLV_HDR_LEN;
data = (u8 *)wpa_ie;
- offset = 0;
+ offset = TLV_HDR_LEN;
if (!is_rsn_ie)
offset += VS_IE_FIXED_HDR_LEN;
- offset += WPA_IE_VERSION_LEN;
+ else
+ offset += WPA_IE_VERSION_LEN;

/* check for multicast cipher suite */
if (offset + WPA_IE_MIN_OUI_LEN > len) {
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/debug.h b/drivers/net/wireless/brcm80211/brcmsmac/debug.h
index 796836b..822781c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/debug.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/debug.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2012 Broadcom Corporation
+ * Copyright (c) 2012 Canonical Ltd.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 606b534..21a8242 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -1343,13 +1343,13 @@ static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain,

wlc_lcnphy_rx_gain_override_enable(pi, true);
wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0);
- usleep_range(500, 500);
+ udelay(500);
write_radio_reg(pi, RADIO_2064_REG112, 0);
if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l))
return false;

wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0);
- usleep_range(500, 500);
+ udelay(500);
write_radio_reg(pi, RADIO_2064_REG112, 0);
if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h))
return false;
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index e71c702..800a165 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -47,6 +47,7 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */
{USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */
{USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */
+ {USB_DEVICE(0x0675, 0x0530)}, /* DrayTek Vigor 530 */
{USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */
{USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */
{USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */
@@ -82,6 +83,8 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
+ {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */
+ {USB_DEVICE(0x083a, 0x4503)}, /* T-Com Sinus 154 data II */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
{USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */
{USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */
@@ -101,6 +104,7 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */
{USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
+ /* {USB_DEVICE(0x15a9, 0x0002)}, * Also SparkLAN WL-682 with 3887 */
{USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */
{USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 3deacaf..4261e8e 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -743,6 +743,8 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)

done:
bufferaddress = (*((dma_addr_t *)skb->cb));
+ if (pci_dma_mapping_error(rtlpci->pdev, bufferaddress))
+ return;
tmp_one = 1;
rtlpriv->cfg->ops->set_desc((u8 *) pdesc, false,
HW_DESC_RXBUFF_ADDR,
@@ -1115,6 +1117,10 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw)
PCI_DMA_FROMDEVICE);

bufferaddress = (*((dma_addr_t *)skb->cb));
+ if (pci_dma_mapping_error(rtlpci->pdev, bufferaddress)) {
+ dev_kfree_skb_any(skb);
+ return 1;
+ }
rtlpriv->cfg->ops->set_desc((u8 *)entry, false,
HW_DESC_RXBUFF_ADDR,
(u8 *)&bufferaddress);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
index 1734247..c31795e 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
@@ -611,8 +611,14 @@ void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw,
dma_addr_t mapping = pci_map_single(rtlpci->pdev,
skb->data, skb->len,
PCI_DMA_TODEVICE);
+
u8 bw_40 = 0;

+ if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+ "DMA mapping error");
+ return;
+ }
rcu_read_lock();
sta = get_sta(hw, mac->vif, mac->bssid);
if (mac->opmode == NL80211_IFTYPE_STATION) {
@@ -774,6 +780,11 @@ void rtl92ce_tx_fill_cmddesc(struct ieee80211_hw *hw,
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
__le16 fc = hdr->frame_control;

+ if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+ "DMA mapping error");
+ return;
+ }
CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_DESC_SIZE);

if (firstseg)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c
index f9f3861..a0fbf28 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c
@@ -587,6 +587,11 @@ void rtl92de_tx_fill_desc(struct ieee80211_hw *hw,
buf_len = skb->len;
mapping = pci_map_single(rtlpci->pdev, skb->data, skb->len,
PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+ "DMA mapping error");
+ return;
+ }
CLEAR_PCI_TX_DESC_CONTENT(pdesc, sizeof(struct tx_desc_92d));
if (ieee80211_is_nullfunc(fc) || ieee80211_is_ctl(fc)) {
firstseg = true;
@@ -740,6 +745,11 @@ void rtl92de_tx_fill_cmddesc(struct ieee80211_hw *hw,
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
__le16 fc = hdr->frame_control;

+ if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+ "DMA mapping error");
+ return;
+ }
CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_DESC_SIZE);
if (firstseg)
SET_TX_DESC_OFFSET(pdesc, USB_HWDESC_HEADER_LEN);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
index 0e9f6eb..206561d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
@@ -611,6 +611,11 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
PCI_DMA_TODEVICE);
u8 bw_40 = 0;

+ if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+ "DMA mapping error");
+ return;
+ }
if (mac->opmode == NL80211_IFTYPE_STATION) {
bw_40 = mac->bw_40;
} else if (mac->opmode == NL80211_IFTYPE_AP ||
@@ -763,6 +768,7 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
bool firstseg, bool lastseg, struct sk_buff *skb)
{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_tcb_desc *tcb_desc = (struct rtl_tcb_desc *)(skb->cb);
@@ -770,7 +776,12 @@ void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
dma_addr_t mapping = pci_map_single(rtlpci->pdev, skb->data, skb->len,
PCI_DMA_TODEVICE);

- /* Clear all status */
+ if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+ "DMA mapping error");
+ return;
+ }
+ /* Clear all status */
CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_CMDDESC_SIZE_RTL8192S);

/* This bit indicate this packet is used for FW download. */
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
index 87331d8..a313be8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
@@ -387,6 +387,11 @@ void rtl8723ae_tx_fill_desc(struct ieee80211_hw *hw,
PCI_DMA_TODEVICE);
u8 bw_40 = 0;

+ if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+ "DMA mapping error");
+ return;
+ }
if (mac->opmode == NL80211_IFTYPE_STATION) {
bw_40 = mac->bw_40;
} else if (mac->opmode == NL80211_IFTYPE_AP ||
@@ -542,6 +547,11 @@ void rtl8723ae_tx_fill_cmddesc(struct ieee80211_hw *hw,
PCI_DMA_TODEVICE);
__le16 fc = hdr->frame_control;

+ if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
+ RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+ "DMA mapping error");
+ return;
+ }
CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_DESC_SIZE);

if (firstseg)
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 29f0969..f2ecdeb 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -210,17 +210,16 @@ static void _usb_writeN_sync(struct rtl_priv *rtlpriv, u32 addr, void *data,
u16 index = REALTEK_USB_VENQT_CMD_IDX;
int pipe = usb_sndctrlpipe(udev, 0); /* write_out */
u8 *buffer;
- dma_addr_t dma_addr;

- wvalue = (u16)(addr&0x0000ffff);
- buffer = usb_alloc_coherent(udev, (size_t)len, GFP_ATOMIC, &dma_addr);
+ wvalue = (u16)(addr & 0x0000ffff);
+ buffer = kmalloc(len, GFP_ATOMIC);
if (!buffer)
return;
memcpy(buffer, data, len);
usb_control_msg(udev, pipe, request, reqtype, wvalue,
index, buffer, len, 50);

- usb_free_coherent(udev, (size_t)len, buffer, dma_addr);
+ kfree(buffer);
}

static void _rtl_usb_io_handler_init(struct device *dev,
@@ -640,6 +639,7 @@ static int _rtl_usb_receive(struct ieee80211_hw *hw)
RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG,
"Failed to prep_rx_urb!!\n");
err = PTR_ERR(skb);
+ usb_free_urb(urb);
goto err_out;
}

diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index ff3c8a2..5d6f2ec 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -162,8 +162,7 @@ config SSB_DRIVER_GIGE

config SSB_DRIVER_GPIO
bool "SSB GPIO driver"
- depends on SSB
- select GPIOLIB
+ depends on SSB && GPIOLIB
help
Driver to provide access to the GPIO pins on the bus.

--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.


Attachments:
(No filename) (17.92 kB)
(No filename) (836.00 B)
Download all attachments

2013-01-04 21:24:27

by David Miller

[permalink] [raw]
Subject: Re: pull request: wireless 2013-01-04

From: "John W. Linville" <[email protected]>
Date: Fri, 4 Jan 2013 15:53:43 -0500

> Arend "fixes" a copyright notice in brcmsmac -- seems harmless.
>
> Christian Lamparter adds a device ID to p54usb, and changes the
> interface combinations reported by carl9170 in order to get it
> working again.
>
> Geert Uytterhoeven gives us a pair of fixes for Kconfig warnings
> about bcma and ssb.
>
> Hante Meuleman fixes some IE parsing to get AP mode working with
> WPA2 security.
>
> Jesper Juhl fixes a urb leak in rtlwifi.
>
> Jussi Kivilinna fixes some mis-usage of usb_alloc_coherent in rtlwifi,
> avoiding a BUG on ARM.
>
> Larry Finger provides a handful of rtlwifi fixes to avoid some log
> SPAM due to not checking the return of pci_map_single.
>
> Niels Ole Salscheider changes a usleep_range in brcmsmac to use udelay
> instead, avoiding a "BUG: scheduling while atomic".
>
> Rafa?? Mi??ecki fixes an ID for a serial flash in the bcma code.
>
> Sujith Manoharan provides a pair of ath9k fixes, one for a compilation
> break and one to correct some gain-related initvals.
>
> Tomasz Guszkowski adds a device ID to p54usb.
>
> Vladimir Kondratiev fixes a Kconfig problem which cause ath9k_htc
> not to build properly.
>
> Please let me know if there are problems!

Pulled, thanks John.