Hi,
This is a follow-up on a previous patch set that had a smaller
audience. This time, I added the lists and people who were involved
in the review of the bindings documentation, since most of my changes
in v2 are coming from discussions there.
This patch series adds device tree support to the wlcore_sdio driver,
which is used by WiLink6, WiLink7 and WiLink8.
The first patches do some clean-up to make the data needed in the
wilink device tree node smaller. The remaining patches implement the
actual device tree node parsing in wlcore_sdio.
I still need to figure out how to add the information about whether
the clocks are XTAL or not. I'll send it in a separate patche set.
The DTS file changes will be sent separately, since they need to go
via different trees.
The bindings documentation patch will also be updated and sent
separately, once the XTAL issue is solved.
Tony has acked some of the patches that touch OMAP areas. I still
need one more ack to a new patch I added (wl12xx: use frequency
instead of enumerations for pdata clocks).
Sekhar, can you please check the patches that touch the davinci board
file and ack them?
Changes in v2:
* New clean-up patch (4/9);
* Patch 6/9 (previously patch 5/5) now doesn't add the clock parsing,
since it became more complicated and I added separate patches for
that;
* 3 new patches (from 7/9 till 9/9) to handle the clock reading in the
device tree;
Please review.
--
Cheers,
Luca.
Luciano Coelho (9):
wl1251: split wl251 platform data to a separate structure
wlcore: use irq_flags in pdata instead of hiding it behind a quirk
wlcore: remove pwr_in_suspend from platform data
wl12xx: use frequency instead of enumerations for pdata clocks
wlcore: always use one-shot IRQ
wlcore: add initial device tree support to the sdio module
wlcore: sdio: add wilink clock providers
wlcore: sdio: get clocks from device tree
wlcore/wl12xx: check if we got correct clock data from DT
arch/arm/mach-davinci/board-da850-evm.c | 5 +-
arch/arm/mach-omap2/board-4430sdp.c | 6 +-
arch/arm/mach-omap2/board-omap3evm.c | 4 +-
arch/arm/mach-omap2/board-omap3pandora.c | 4 +-
arch/arm/mach-omap2/board-omap4panda.c | 4 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 4 +-
drivers/net/wireless/ti/wilink_platform_data.c | 37 ++++++--
drivers/net/wireless/ti/wl1251/sdio.c | 12 +--
drivers/net/wireless/ti/wl1251/spi.c | 2 +-
drivers/net/wireless/ti/wl12xx/main.c | 78 +++++++++++++++--
drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 ++++++
drivers/net/wireless/ti/wlcore/debugfs.c | 2 +-
drivers/net/wireless/ti/wlcore/main.c | 16 ++--
drivers/net/wireless/ti/wlcore/sdio.c | 112 ++++++++++++++++++++++--
drivers/net/wireless/ti/wlcore/wlcore.h | 5 +-
drivers/net/wireless/ti/wlcore/wlcore_i.h | 1 +
include/linux/wl12xx.h | 54 ++++++------
18 files changed, 295 insertions(+), 81 deletions(-)
--
1.7.10.4
If platform data is not available, try to get the required information
from the device tree. Register an OF match table and parse the
appropriate device tree nodes.
Parse interrupt property only, for now.
Signed-off-by: Luciano Coelho <[email protected]>
---
drivers/net/wireless/ti/wlcore/sdio.c | 69 ++++++++++++++++++++++++++++++---
1 file changed, 63 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 4c7e8ac..9370d7e 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -30,7 +30,7 @@
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
+#include <linux/of_irq.h>
#include <linux/wl12xx.h>
#include <linux/pm_runtime.h>
#include <linux/printk.h>
@@ -214,6 +214,43 @@ static struct wl1271_if_operations sdio_ops = {
.set_block_size = wl1271_sdio_set_block_size,
};
+static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev)
+{
+ struct wl12xx_platform_data *pdata;
+ struct device_node *np = dev->of_node;
+
+ if (!np) {
+ np = of_find_matching_node(NULL, dev->driver->of_match_table);
+ if (!np) {
+ dev_notice(dev, "device tree node not available\n");
+ pdata = ERR_PTR(-ENODEV);
+ goto out;
+ }
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "can't allocate platform data\n");
+ pdata = ERR_PTR(-ENODEV);
+ goto out;
+ }
+
+ pdata->irq = irq_of_parse_and_map(np, 0);
+ if (pdata->irq < 0) {
+ dev_err(dev, "can't get interrupt gpio from the device tree\n");
+ goto out_free;
+ }
+
+ goto out;
+
+out_free:
+ kfree(pdata);
+ pdata = ERR_PTR(-ENODEV);
+
+out:
+ return pdata;
+}
+
static int wl1271_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
@@ -248,11 +285,22 @@ static int wl1271_probe(struct sdio_func *func,
/* Use block mode for transferring over one block size of data */
func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+ /* The pdata allocated here is freed when the device is freed,
+ * so we don't need an additional out label to free it in case
+ * of error further on.
+ */
+
+ /* Try to get legacy platform data from the board file */
pdev_data->pdata = wl12xx_get_platform_data();
if (IS_ERR(pdev_data->pdata)) {
- ret = PTR_ERR(pdev_data->pdata);
- dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
- goto out_free_glue;
+ dev_info(&func->dev,
+ "legacy platform data not found, trying device tree\n");
+
+ pdev_data->pdata = wlcore_get_pdata_from_of(&func->dev);
+ if (IS_ERR(pdev_data->pdata)) {
+ dev_err(&func->dev, "can't get platform data\n");
+ goto out_free_glue;
+ }
}
/* if sdio can keep power while host is suspended, enable wow */
@@ -386,16 +434,25 @@ static const struct dev_pm_ops wl1271_sdio_pm_ops = {
};
#endif
+static const struct of_device_id wlcore_sdio_of_match_table[] = {
+ { .compatible = "ti,wilink6" },
+ { .compatible = "ti,wilink7" },
+ { .compatible = "ti,wilink8" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wlcore_sdio_of_match_table);
+
static struct sdio_driver wl1271_sdio_driver = {
.name = "wl1271_sdio",
.id_table = wl1271_devices,
.probe = wl1271_probe,
.remove = wl1271_remove,
-#ifdef CONFIG_PM
.drv = {
+#ifdef CONFIG_PM
.pm = &wl1271_sdio_pm_ops,
- },
#endif
+ .of_match_table = of_match_ptr(wlcore_sdio_of_match_table),
+ },
};
static int __init wl1271_init(void)
--
1.7.10.4
On 17:55-20130702, Luciano Coelho wrote:
> Instead of defining an enumeration with the FW specific values for the
> different clock rates, use the actual frequency instead. Also add a
> boolean to specify whether the clock is XTAL or not.
>
> Change all board files to reflect this.
>
> Cc: Tony Lindgren <[email protected]>
> Cc: Sekhar Nori <[email protected]>
> Signed-off-by: Luciano Coelho <[email protected]>
> ---
> arch/arm/mach-davinci/board-da850-evm.c | 3 +-
> arch/arm/mach-omap2/board-4430sdp.c | 5 ++-
^^
> arch/arm/mach-omap2/board-omap3evm.c | 3 +-
> arch/arm/mach-omap2/board-omap4panda.c | 3 +-
^^
Please do not add more platform data to platforms that are DT only.
> arch/arm/mach-omap2/board-zoom-peripherals.c | 3 +-
> drivers/net/wireless/ti/wl12xx/main.c | 58 +++++++++++++++++++++++++-
> drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 +++++++++++++
> include/linux/wl12xx.h | 28 ++-----------
> 8 files changed, 99 insertions(+), 32 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index d2a2a98..202f3d0 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -1378,7 +1378,8 @@ static const short da850_wl12xx_pins[] __initconst = {
> static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
> .irq = -1,
> .irq_flags = IRQF_TRIGGER_RISING,
> - .board_ref_clock = WL12XX_REFCLOCK_38,
> + .ref_clock_freq = 38400000,
> + .ref_clock_xtal = false,
> };
>
> static __init int da850_wl12xx_init(void)
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index c2334aa..da2b892 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -694,8 +694,9 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
>
> static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
> .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> - .board_ref_clock = WL12XX_REFCLOCK_26,
> - .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
> + .ref_clock_freq = 26000000,
> + .ref_clock_xtal = false,
> + .tcxo_clock_freq = 26000000,
> };
>
> static void __init omap4_sdp4430_wifi_init(void)
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
> index a0c0adf..d24435c 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -459,7 +459,8 @@ static struct platform_device omap3evm_wlan_regulator = {
>
> struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
> .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> - .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
> + .ref_clock_freq = 38400000,
> + .ref_clock_xtal = false,
> };
> #endif
>
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> index ba00862..ac6413c 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -231,7 +231,8 @@ static struct platform_device omap_vwlan_device = {
>
> static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
> .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> - .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
> + .ref_clock_freq = 38400000,
> + .ref_clock_xtal = false,
> };
>
> static struct twl6040_codec_data twl6040_codec = {
> diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
> index ced012c..f4f4fe7 100644
> --- a/arch/arm/mach-omap2/board-zoom-peripherals.c
> +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
> @@ -245,7 +245,8 @@ static struct platform_device *zoom_devices[] __initdata = {
>
> static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
> .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> - .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
> + .ref_clock_freq = 26000000,
> + .ref_clock_xtal = false,
> };
>
> static struct omap2_hsmmc_info mmc[] = {
> diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
> index 1c627da..903dcb3 100644
> --- a/drivers/net/wireless/ti/wl12xx/main.c
> +++ b/drivers/net/wireless/ti/wl12xx/main.c
> @@ -1701,6 +1701,42 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
> },
> };
>
> +static struct wl12xx_clock wl12xx_refclock_table[] = {
> + { 19200000, false, WL12XX_REFCLOCK_19 },
> + { 26000000, false, WL12XX_REFCLOCK_26 },
> + { 26000000, true, WL12XX_REFCLOCK_26_XTAL },
> + { 38400000, false, WL12XX_REFCLOCK_38 },
> + { 38400000, true, WL12XX_REFCLOCK_38_XTAL },
> + { 52000000, false, WL12XX_REFCLOCK_52 },
> + { 0, false, 0 }
> +};
> +
> +static struct wl12xx_clock wl12xx_tcxoclock_table[] = {
> + { 16368000, false, WL12XX_TCXOCLOCK_16_368 },
> + { 16800000, false, WL12XX_TCXOCLOCK_16_8 },
> + { 19200000, false, WL12XX_TCXOCLOCK_19_2 },
> + { 26000000, false, WL12XX_TCXOCLOCK_26 },
> + { 32736000, false, WL12XX_TCXOCLOCK_32_736 },
> + { 33600000, false, WL12XX_TCXOCLOCK_33_6 },
> + { 38400000, false, WL12XX_TCXOCLOCK_38_4 },
> + { 52000000, false, WL12XX_TCXOCLOCK_52 },
> + { 0, false, 0 }
> +};
> +
> +static int wl12xx_get_clock_idx(struct wl12xx_clock *table, u32 freq, bool xtal)
> +{
> + int i = 0;
> +
> + while(table[i].freq != 0) {
> + if ((table[i].freq == freq) &&
> + (table[i].xtal == xtal))
> + return table[i].hw_idx;
> + i++;
> + };
> +
> + return -EINVAL;
> +}
> +
> static int wl12xx_setup(struct wl1271 *wl)
> {
> struct wl12xx_priv *priv = wl->priv;
> @@ -1722,7 +1758,16 @@ static int wl12xx_setup(struct wl1271 *wl)
> wl12xx_conf_init(wl);
>
> if (!fref_param) {
> - priv->ref_clock = pdata->board_ref_clock;
> + priv->ref_clock = wl12xx_get_clock_idx(wl12xx_refclock_table,
> + pdata->ref_clock_freq,
> + pdata->ref_clock_xtal);
> + if (priv->ref_clock < 0) {
> + wl1271_error("Invalid ref_clock frequency (%d Hz, %s)",
> + pdata->ref_clock_freq,
> + pdata->ref_clock_xtal ? "XTAL" : "not XTAL");
> +
> + return priv->ref_clock;
> + }
> } else {
> if (!strcmp(fref_param, "19.2"))
> priv->ref_clock = WL12XX_REFCLOCK_19;
> @@ -1741,7 +1786,16 @@ static int wl12xx_setup(struct wl1271 *wl)
> }
>
> if (!tcxo_param) {
> - priv->tcxo_clock = pdata->board_tcxo_clock;
> + priv->tcxo_clock = wl12xx_get_clock_idx(wl12xx_tcxoclock_table,
> + pdata->tcxo_clock_freq,
> + pdata->tcxo_clock_xtal);
> + if (priv->tcxo_clock < 0) {
> + wl1271_error("Invalid tcxo_clock frequency (%d Hz, %s)",
> + pdata->tcxo_clock_freq,
> + pdata->tcxo_clock_xtal ? "XTAL" : "not XTAL");
> +
> + return priv->tcxo_clock;
> + }
> } else {
> if (!strcmp(tcxo_param, "19.2"))
> priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
> diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
> index 9e5484a..05f631b 100644
> --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
> +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
> @@ -79,4 +79,32 @@ struct wl12xx_priv {
> struct wl127x_rx_mem_pool_addr *rx_mem_addr;
> };
>
> +/* Reference clock values */
> +enum {
> + WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
> + WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
> + WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
> + WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
> + WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
> + WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
> +};
> +
> +/* TCXO clock values */
> +enum {
> + WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
> + WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
> + WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */
> + WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */
> + WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */
> + WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */
> + WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */
> + WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
> +};
> +
> +struct wl12xx_clock {
> + u32 freq;
> + bool xtal;
> + u8 hw_idx;
> +};
> +
> #endif /* __WL12XX_PRIV_H__ */
> diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
> index 1e4ed6e..4982b94 100644
> --- a/include/linux/wl12xx.h
> +++ b/include/linux/wl12xx.h
> @@ -26,28 +26,6 @@
>
> #include <linux/err.h>
>
> -/* Reference clock values */
> -enum {
> - WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
> - WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
> - WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
> - WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
> - WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
> - WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
> -};
> -
> -/* TCXO clock values */
> -enum {
> - WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
> - WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
> - WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */
> - WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */
> - WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */
> - WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */
> - WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */
> - WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
> -};
> -
> struct wl1251_platform_data {
> void (*set_power)(bool enable);
> /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
> @@ -58,8 +36,10 @@ struct wl1251_platform_data {
> struct wl12xx_platform_data {
> int irq;
> unsigned long irq_flags;
> - int board_ref_clock;
> - int board_tcxo_clock;
> + int ref_clock_freq; /* in Hertz */
> + bool ref_clock_xtal; /* specify whether the clock is XTAL or not */
> + int tcxo_clock_freq; /* in Hertz */
> + bool tcxo_clock_xtal; /* specify whether the clock is XTAL or not */
> };
>
> #ifdef CONFIG_WILINK_PLATFORM_DATA
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Nishanth Menon
On Tue, 2013-07-02 at 18:35 +0300, Felipe Balbi wrote:
> Hi,
>
> On Tue, Jul 02, 2013 at 05:55:47PM +0300, Luciano Coelho wrote:
> > @@ -294,6 +316,8 @@ static int wl1271_probe(struct sdio_func *func,
> > /* Use block mode for transferring over one block size of data */
> > func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
> >
> > + sdio_set_drvdata(func, glue);
>
> is this move really necessary ?
It is, because I use the glue in wlcore_get_pdata_from_of(), so I need
to call sdio_set_drvdata() earlier. I reckoned it wouldn't hurt to move
this, so I wouldn't have to pass the glue in the
wlcore_get_pdata_from_of() call.
--
Luca.
On Tue, Jul 02, 2013 at 11:19:54PM +0300, Luciano Coelho wrote:
> On Tue, 2013-07-02 at 18:35 +0300, Felipe Balbi wrote:
> > Hi,
> >
> > On Tue, Jul 02, 2013 at 05:55:47PM +0300, Luciano Coelho wrote:
> > > @@ -294,6 +316,8 @@ static int wl1271_probe(struct sdio_func *func,
> > > /* Use block mode for transferring over one block size of data */
> > > func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
> > >
> > > + sdio_set_drvdata(func, glue);
> >
> > is this move really necessary ?
>
> It is, because I use the glue in wlcore_get_pdata_from_of(), so I need
> to call sdio_set_drvdata() earlier. I reckoned it wouldn't hurt to move
> this, so I wouldn't have to pass the glue in the
> wlcore_get_pdata_from_of() call.
that's alright, it does look like it deserves a mention in changelog
though. Other than that:
Reviewed-by: Felipe Balbi <[email protected]>
--
balbi
Hi,
On Tue, Jul 02, 2013 at 05:55:43PM +0300, Luciano Coelho wrote:
> diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
> index 1c627da..903dcb3 100644
> --- a/drivers/net/wireless/ti/wl12xx/main.c
> +++ b/drivers/net/wireless/ti/wl12xx/main.c
> @@ -1701,6 +1701,42 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
> },
> };
>
> +static struct wl12xx_clock wl12xx_refclock_table[] = {
const
> + { 19200000, false, WL12XX_REFCLOCK_19 },
> + { 26000000, false, WL12XX_REFCLOCK_26 },
> + { 26000000, true, WL12XX_REFCLOCK_26_XTAL },
> + { 38400000, false, WL12XX_REFCLOCK_38 },
> + { 38400000, true, WL12XX_REFCLOCK_38_XTAL },
> + { 52000000, false, WL12XX_REFCLOCK_52 },
> + { 0, false, 0 }
> +};
> +
> +static struct wl12xx_clock wl12xx_tcxoclock_table[] = {
const
--
balbi
Read the clock nodes from the device tree and use them to set the
frequency for the refclock and the tcxo clock.
Signed-off-by: Luciano Coelho <[email protected]>
---
drivers/net/wireless/ti/wlcore/sdio.c | 36 +++++++++++++++++++++++++++++++--
1 file changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 980bf3d..60fce49 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -53,6 +53,7 @@ static bool dump = false;
struct wl12xx_sdio_glue {
struct device *dev;
struct platform_device *core;
+ struct clk *refclock, *tcxoclock;
};
static const struct sdio_device_id wl1271_devices[] = {
@@ -224,6 +225,7 @@ static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev)
struct wl12xx_platform_data *pdata;
struct device_node *np = dev->of_node;
struct device_node *clock_node;
+ struct wl12xx_sdio_glue *glue = sdio_get_drvdata(dev_to_sdio_func(dev));
if (!np) {
np = of_find_matching_node(NULL, dev->driver->of_match_table);
@@ -250,6 +252,26 @@ static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev)
for_each_matching_node(clock_node, wlcore_sdio_of_clk_match_table)
of_fixed_clk_setup(clock_node);
+ /* TODO: make sure we have this when needed (ie. for WL6 and WL7) */
+ glue->refclock = of_clk_get_by_name(np, "refclock");
+ if (IS_ERR(glue->refclock)) {
+ dev_err(dev, "couldn't find refclock on the device tree\n");
+ glue->refclock = NULL;
+ } else {
+ clk_prepare_enable(glue->refclock);
+ pdata->ref_clock_freq = clk_get_rate(glue->refclock);
+ }
+
+ /* TODO: make sure we have this when needed (ie. for WL7) */
+ glue->tcxoclock = of_clk_get_by_name(np, "tcxoclock");
+ if (IS_ERR(glue->tcxoclock)) {
+ dev_err(dev, "couldn't find tcxoclock on the device tree\n");
+ glue->tcxoclock = NULL;
+ } else {
+ clk_prepare_enable(glue->tcxoclock);
+ pdata->ref_clock_freq = clk_get_rate(glue->tcxoclock);
+ }
+
goto out;
out_free:
@@ -294,6 +316,8 @@ static int wl1271_probe(struct sdio_func *func,
/* Use block mode for transferring over one block size of data */
func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+ sdio_set_drvdata(func, glue);
+
/* The pdata allocated here is freed when the device is freed,
* so we don't need an additional out label to free it in case
* of error further on.
@@ -319,8 +343,6 @@ static int wl1271_probe(struct sdio_func *func,
if (mmcflags & MMC_PM_KEEP_POWER)
pdev_data->pwr_in_suspend = true;
- sdio_set_drvdata(func, glue);
-
/* Tell PM core that we don't need the card to be powered now */
pm_runtime_put_noidle(&func->dev);
@@ -387,6 +409,16 @@ static void wl1271_remove(struct sdio_func *func)
{
struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
+ if (glue->refclock) {
+ clk_disable_unprepare(glue->refclock);
+ clk_put(glue->refclock);
+ }
+
+ if (glue->tcxoclock) {
+ clk_disable_unprepare(glue->tcxoclock);
+ clk_put(glue->tcxoclock);
+ }
+
/* Undo decrement done above in wl1271_probe */
pm_runtime_get_noresume(&func->dev);
--
1.7.10.4
Instead of defining an enumeration with the FW specific values for the
different clock rates, use the actual frequency instead. Also add a
boolean to specify whether the clock is XTAL or not.
Change all board files to reflect this.
Cc: Tony Lindgren <[email protected]>
Cc: Sekhar Nori <[email protected]>
Signed-off-by: Luciano Coelho <[email protected]>
---
arch/arm/mach-davinci/board-da850-evm.c | 3 +-
arch/arm/mach-omap2/board-4430sdp.c | 5 ++-
arch/arm/mach-omap2/board-omap3evm.c | 3 +-
arch/arm/mach-omap2/board-omap4panda.c | 3 +-
arch/arm/mach-omap2/board-zoom-peripherals.c | 3 +-
drivers/net/wireless/ti/wl12xx/main.c | 58 +++++++++++++++++++++++++-
drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 +++++++++++++
include/linux/wl12xx.h | 28 ++-----------
8 files changed, 99 insertions(+), 32 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index d2a2a98..202f3d0 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1378,7 +1378,8 @@ static const short da850_wl12xx_pins[] __initconst = {
static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
.irq = -1,
.irq_flags = IRQF_TRIGGER_RISING,
- .board_ref_clock = WL12XX_REFCLOCK_38,
+ .ref_clock_freq = 38400000,
+ .ref_clock_xtal = false,
};
static __init int da850_wl12xx_init(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index c2334aa..da2b892 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -694,8 +694,9 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
.irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
- .board_ref_clock = WL12XX_REFCLOCK_26,
- .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
+ .ref_clock_freq = 26000000,
+ .ref_clock_xtal = false,
+ .tcxo_clock_freq = 26000000,
};
static void __init omap4_sdp4430_wifi_init(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index a0c0adf..d24435c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -459,7 +459,8 @@ static struct platform_device omap3evm_wlan_regulator = {
struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
.irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
- .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
+ .ref_clock_freq = 38400000,
+ .ref_clock_xtal = false,
};
#endif
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index ba00862..ac6413c 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -231,7 +231,8 @@ static struct platform_device omap_vwlan_device = {
static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
.irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
- .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
+ .ref_clock_freq = 38400000,
+ .ref_clock_xtal = false,
};
static struct twl6040_codec_data twl6040_codec = {
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index ced012c..f4f4fe7 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -245,7 +245,8 @@ static struct platform_device *zoom_devices[] __initdata = {
static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
.irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
- .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
+ .ref_clock_freq = 26000000,
+ .ref_clock_xtal = false,
};
static struct omap2_hsmmc_info mmc[] = {
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 1c627da..903dcb3 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1701,6 +1701,42 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
},
};
+static struct wl12xx_clock wl12xx_refclock_table[] = {
+ { 19200000, false, WL12XX_REFCLOCK_19 },
+ { 26000000, false, WL12XX_REFCLOCK_26 },
+ { 26000000, true, WL12XX_REFCLOCK_26_XTAL },
+ { 38400000, false, WL12XX_REFCLOCK_38 },
+ { 38400000, true, WL12XX_REFCLOCK_38_XTAL },
+ { 52000000, false, WL12XX_REFCLOCK_52 },
+ { 0, false, 0 }
+};
+
+static struct wl12xx_clock wl12xx_tcxoclock_table[] = {
+ { 16368000, false, WL12XX_TCXOCLOCK_16_368 },
+ { 16800000, false, WL12XX_TCXOCLOCK_16_8 },
+ { 19200000, false, WL12XX_TCXOCLOCK_19_2 },
+ { 26000000, false, WL12XX_TCXOCLOCK_26 },
+ { 32736000, false, WL12XX_TCXOCLOCK_32_736 },
+ { 33600000, false, WL12XX_TCXOCLOCK_33_6 },
+ { 38400000, false, WL12XX_TCXOCLOCK_38_4 },
+ { 52000000, false, WL12XX_TCXOCLOCK_52 },
+ { 0, false, 0 }
+};
+
+static int wl12xx_get_clock_idx(struct wl12xx_clock *table, u32 freq, bool xtal)
+{
+ int i = 0;
+
+ while(table[i].freq != 0) {
+ if ((table[i].freq == freq) &&
+ (table[i].xtal == xtal))
+ return table[i].hw_idx;
+ i++;
+ };
+
+ return -EINVAL;
+}
+
static int wl12xx_setup(struct wl1271 *wl)
{
struct wl12xx_priv *priv = wl->priv;
@@ -1722,7 +1758,16 @@ static int wl12xx_setup(struct wl1271 *wl)
wl12xx_conf_init(wl);
if (!fref_param) {
- priv->ref_clock = pdata->board_ref_clock;
+ priv->ref_clock = wl12xx_get_clock_idx(wl12xx_refclock_table,
+ pdata->ref_clock_freq,
+ pdata->ref_clock_xtal);
+ if (priv->ref_clock < 0) {
+ wl1271_error("Invalid ref_clock frequency (%d Hz, %s)",
+ pdata->ref_clock_freq,
+ pdata->ref_clock_xtal ? "XTAL" : "not XTAL");
+
+ return priv->ref_clock;
+ }
} else {
if (!strcmp(fref_param, "19.2"))
priv->ref_clock = WL12XX_REFCLOCK_19;
@@ -1741,7 +1786,16 @@ static int wl12xx_setup(struct wl1271 *wl)
}
if (!tcxo_param) {
- priv->tcxo_clock = pdata->board_tcxo_clock;
+ priv->tcxo_clock = wl12xx_get_clock_idx(wl12xx_tcxoclock_table,
+ pdata->tcxo_clock_freq,
+ pdata->tcxo_clock_xtal);
+ if (priv->tcxo_clock < 0) {
+ wl1271_error("Invalid tcxo_clock frequency (%d Hz, %s)",
+ pdata->tcxo_clock_freq,
+ pdata->tcxo_clock_xtal ? "XTAL" : "not XTAL");
+
+ return priv->tcxo_clock;
+ }
} else {
if (!strcmp(tcxo_param, "19.2"))
priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
index 9e5484a..05f631b 100644
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -79,4 +79,32 @@ struct wl12xx_priv {
struct wl127x_rx_mem_pool_addr *rx_mem_addr;
};
+/* Reference clock values */
+enum {
+ WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
+ WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
+ WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
+ WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
+ WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
+ WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
+};
+
+/* TCXO clock values */
+enum {
+ WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
+ WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
+ WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */
+ WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */
+ WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */
+ WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */
+ WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */
+ WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
+};
+
+struct wl12xx_clock {
+ u32 freq;
+ bool xtal;
+ u8 hw_idx;
+};
+
#endif /* __WL12XX_PRIV_H__ */
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index 1e4ed6e..4982b94 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -26,28 +26,6 @@
#include <linux/err.h>
-/* Reference clock values */
-enum {
- WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
- WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
- WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
- WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
- WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
- WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
-};
-
-/* TCXO clock values */
-enum {
- WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
- WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
- WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */
- WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */
- WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */
- WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */
- WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */
- WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
-};
-
struct wl1251_platform_data {
void (*set_power)(bool enable);
/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
@@ -58,8 +36,10 @@ struct wl1251_platform_data {
struct wl12xx_platform_data {
int irq;
unsigned long irq_flags;
- int board_ref_clock;
- int board_tcxo_clock;
+ int ref_clock_freq; /* in Hertz */
+ bool ref_clock_xtal; /* specify whether the clock is XTAL or not */
+ int tcxo_clock_freq; /* in Hertz */
+ bool tcxo_clock_xtal; /* specify whether the clock is XTAL or not */
};
#ifdef CONFIG_WILINK_PLATFORM_DATA
--
1.7.10.4
The fref and the tcxo clocks settings are optional in some platforms.
WiLink8 doesn't need either, so we don't check the values. WiLink 6
only needs the fref clock, so we check that it is valid or return with
an error. WiLink7 needs both clocks, if either is not available we
return with an error.
Signed-off-by: Luciano Coelho <[email protected]>
---
drivers/net/wireless/ti/wl12xx/main.c | 20 +++++++++++++++++---
drivers/net/wireless/ti/wlcore/sdio.c | 4 ----
2 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 903dcb3..72d13e4 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -927,6 +927,11 @@ static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
u16 sys_clk_cfg;
int ret;
+ if ((priv->ref_clock < 0) || (priv->tcxo_clock < 0)) {
+ wl1271_error("Missing fref and/or tcxo clock settings\n");
+ return -EINVAL;
+ }
+
/* For XTAL-only modes, FREF will be used after switching from TCXO */
if (priv->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
priv->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
@@ -976,6 +981,11 @@ static int wl127x_boot_clk(struct wl1271 *wl)
u32 clk;
int ret;
+ if (priv->ref_clock < 0) {
+ wl1271_error("Missing fref clock settings\n");
+ return -EINVAL;
+ }
+
if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION;
@@ -1757,7 +1767,7 @@ static int wl12xx_setup(struct wl1271 *wl)
wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, &wl12xx_ht_cap);
wl12xx_conf_init(wl);
- if (!fref_param) {
+ if (!fref_param && (pdata->ref_clock_freq > 0)) {
priv->ref_clock = wl12xx_get_clock_idx(wl12xx_refclock_table,
pdata->ref_clock_freq,
pdata->ref_clock_xtal);
@@ -1768,6 +1778,8 @@ static int wl12xx_setup(struct wl1271 *wl)
return priv->ref_clock;
}
+ } else if (!fref_param) {
+ priv->ref_clock = -EINVAL;
} else {
if (!strcmp(fref_param, "19.2"))
priv->ref_clock = WL12XX_REFCLOCK_19;
@@ -1785,7 +1797,7 @@ static int wl12xx_setup(struct wl1271 *wl)
wl1271_error("Invalid fref parameter %s", fref_param);
}
- if (!tcxo_param) {
+ if (!fref_param && (pdata->tcxo_clock_freq > 0)) {
priv->tcxo_clock = wl12xx_get_clock_idx(wl12xx_tcxoclock_table,
pdata->tcxo_clock_freq,
pdata->tcxo_clock_xtal);
@@ -1796,7 +1808,9 @@ static int wl12xx_setup(struct wl1271 *wl)
return priv->tcxo_clock;
}
- } else {
+ } else if (!fref_param) {
+ priv->tcxo_clock = -EINVAL;
+ }else {
if (!strcmp(tcxo_param, "19.2"))
priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
else if (!strcmp(tcxo_param, "26"))
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 60fce49..c76eb66 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -252,20 +252,16 @@ static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev)
for_each_matching_node(clock_node, wlcore_sdio_of_clk_match_table)
of_fixed_clk_setup(clock_node);
- /* TODO: make sure we have this when needed (ie. for WL6 and WL7) */
glue->refclock = of_clk_get_by_name(np, "refclock");
if (IS_ERR(glue->refclock)) {
- dev_err(dev, "couldn't find refclock on the device tree\n");
glue->refclock = NULL;
} else {
clk_prepare_enable(glue->refclock);
pdata->ref_clock_freq = clk_get_rate(glue->refclock);
}
- /* TODO: make sure we have this when needed (ie. for WL7) */
glue->tcxoclock = of_clk_get_by_name(np, "tcxoclock");
if (IS_ERR(glue->tcxoclock)) {
- dev_err(dev, "couldn't find tcxoclock on the device tree\n");
glue->tcxoclock = NULL;
} else {
clk_prepare_enable(glue->tcxoclock);
--
1.7.10.4
On Wed, 2013-07-03 at 13:13 +0300, Grazvydas Ignotas wrote:
> Hi,
Hi Gražvydas,
> On Tue, Jul 2, 2013 at 5:55 PM, Luciano Coelho <[email protected]> wrote:
> > Hi,
> >
> > This is a follow-up on a previous patch set that had a smaller
> > audience. This time, I added the lists and people who were involved
> > in the review of the bindings documentation, since most of my changes
> > in v2 are coming from discussions there.
> >
> > This patch series adds device tree support to the wlcore_sdio driver,
> > which is used by WiLink6, WiLink7 and WiLink8.
>
> Could you perhaps consider doing device tree conversion for wl1251
> too? With the knowledge you have from working on this series, it would
> be much easier for you to do it than for someone else, and I don't
> have much hope someone will do it at all. It's WiLink series chip
> after all. Without this pandora and N900 are going to lose wifi
> support after the switch to dt-only kernel.
Unfortunately I don't have much time to work on wl1251. I think it
wouldn't be too difficult to do though, so patches are welcome. ;)
Maybe you could try to make this change and I could support you if
needed?
> I can offer you my help testing things on pandora and I'm sure someone
> here could try it on N900.
I could try it on the N900, if it is still bootable easily with the
mainline. ;)
--
Cheers,
Luca.
The platform_quirk element in the platform data was used to change the
way the IRQ is triggered. When set, the EDGE_IRQ quirk would change
the irqflags used and treat edge trigger differently from the rest.
Instead of hiding this irq flag setting behind the quirk, export the
whole irq_flags element and let the board file define what to use.
This will be more meaningful than driver-specific quirks when we
switch to DT.
Cc: Tony Lindgren <[email protected]>
Cc: Sekhar Nori <[email protected]>
Signed-off-by: Luciano Coelho <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
---
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-omap2/board-4430sdp.c | 1 +
arch/arm/mach-omap2/board-omap3evm.c | 1 +
arch/arm/mach-omap2/board-omap4panda.c | 1 +
arch/arm/mach-omap2/board-zoom-peripherals.c | 1 +
drivers/net/wireless/ti/wlcore/debugfs.c | 2 +-
drivers/net/wireless/ti/wlcore/main.c | 13 +++----------
drivers/net/wireless/ti/wlcore/wlcore.h | 5 ++---
include/linux/wl12xx.h | 5 +----
9 files changed, 12 insertions(+), 19 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 8a24b6c..d2a2a98 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1377,8 +1377,8 @@ static const short da850_wl12xx_pins[] __initconst = {
static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
.irq = -1,
+ .irq_flags = IRQF_TRIGGER_RISING,
.board_ref_clock = WL12XX_REFCLOCK_38,
- .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
};
static __init int da850_wl12xx_init(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 56a9a4f..c2334aa 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -693,6 +693,7 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
}
static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
+ .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
.board_ref_clock = WL12XX_REFCLOCK_26,
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
};
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index f76d0de..a0c0adf 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -458,6 +458,7 @@ static struct platform_device omap3evm_wlan_regulator = {
};
struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
+ .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
};
#endif
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 1e2c75e..ba00862 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -230,6 +230,7 @@ static struct platform_device omap_vwlan_device = {
};
static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
+ .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
};
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index a90375d..ced012c 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -244,6 +244,7 @@ static struct platform_device *zoom_devices[] __initdata = {
};
static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
+ .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
.board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
};
diff --git a/drivers/net/wireless/ti/wlcore/debugfs.c b/drivers/net/wireless/ti/wlcore/debugfs.c
index c3e1f79..5eff663 100644
--- a/drivers/net/wireless/ti/wlcore/debugfs.c
+++ b/drivers/net/wireless/ti/wlcore/debugfs.c
@@ -486,7 +486,7 @@ static ssize_t driver_state_read(struct file *file, char __user *user_buf,
DRIVER_STATE_PRINT_HEX(irq);
/* TODO: ref_clock and tcxo_clock were moved to wl12xx priv */
DRIVER_STATE_PRINT_HEX(hw_pg_ver);
- DRIVER_STATE_PRINT_HEX(platform_quirks);
+ DRIVER_STATE_PRINT_HEX(irq_flags);
DRIVER_STATE_PRINT_HEX(chip.id);
DRIVER_STATE_PRINT_STR(chip.fw_ver_str);
DRIVER_STATE_PRINT_STR(chip.phy_fw_ver_str);
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index b8db55c..e7294b8 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -516,7 +516,7 @@ static int wlcore_irq_locked(struct wl1271 *wl)
* In case edge triggered interrupt must be used, we cannot iterate
* more than once without introducing race conditions with the hardirq.
*/
- if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+ if (wl->irq_flags & IRQF_TRIGGER_RISING)
loopcount = 1;
wl1271_debug(DEBUG_IRQ, "IRQ work");
@@ -5765,7 +5765,6 @@ struct ieee80211_hw *wlcore_alloc_hw(size_t priv_size, u32 aggr_buf_size,
wl->ap_ps_map = 0;
wl->ap_fw_ps_map = 0;
wl->quirks = 0;
- wl->platform_quirks = 0;
wl->system_hlid = WL12XX_SYSTEM_HLID;
wl->active_sta_count = 0;
wl->active_link_count = 0;
@@ -5901,7 +5900,6 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
struct platform_device *pdev = wl->pdev;
struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data;
struct wl12xx_platform_data *pdata = pdev_data->pdata;
- unsigned long irqflags;
int ret;
if (fw) {
@@ -5928,16 +5926,11 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
wlcore_adjust_conf(wl);
wl->irq = platform_get_irq(pdev, 0);
- wl->platform_quirks = pdata->platform_quirks;
wl->if_ops = pdev_data->if_ops;
-
- if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
- irqflags = IRQF_TRIGGER_RISING;
- else
- irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
+ wl->irq_flags = pdata->irq_flags;
ret = request_threaded_irq(wl->irq, NULL, wlcore_irq,
- irqflags, pdev->name, wl);
+ wl->irq_flags, pdev->name, wl);
if (ret < 0) {
wl1271_error("request_irq() failed: %d", ret);
goto out_free_nvs;
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 0034979..8306bde 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -185,6 +185,8 @@ struct wl1271 {
int irq;
+ int irq_flags;
+
spinlock_t wl_lock;
enum wlcore_state state;
@@ -384,9 +386,6 @@ struct wl1271 {
/* Quirks of specific hardware revisions */
unsigned int quirks;
- /* Platform limitations */
- unsigned int platform_quirks;
-
/* number of currently active RX BA sessions */
int ba_rx_session_count;
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index b516b4f..04e3096 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -57,15 +57,12 @@ struct wl1251_platform_data {
struct wl12xx_platform_data {
int irq;
+ unsigned long irq_flags;
int board_ref_clock;
int board_tcxo_clock;
- unsigned long platform_quirks;
bool pwr_in_suspend;
};
-/* Platform does not support level trigger interrupts */
-#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0)
-
#ifdef CONFIG_WILINK_PLATFORM_DATA
int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
--
1.7.10.4
On Tue, 2013-07-02 at 18:31 +0300, Felipe Balbi wrote:
> Hi,
>
> On Tue, Jul 02, 2013 at 05:55:43PM +0300, Luciano Coelho wrote:
> > diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
> > index 1c627da..903dcb3 100644
> > --- a/drivers/net/wireless/ti/wl12xx/main.c
> > +++ b/drivers/net/wireless/ti/wl12xx/main.c
> > @@ -1701,6 +1701,42 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
> > },
> > };
> >
> > +static struct wl12xx_clock wl12xx_refclock_table[] = {
>
> const
>
> > + { 19200000, false, WL12XX_REFCLOCK_19 },
> > + { 26000000, false, WL12XX_REFCLOCK_26 },
> > + { 26000000, true, WL12XX_REFCLOCK_26_XTAL },
> > + { 38400000, false, WL12XX_REFCLOCK_38 },
> > + { 38400000, true, WL12XX_REFCLOCK_38_XTAL },
> > + { 52000000, false, WL12XX_REFCLOCK_52 },
> > + { 0, false, 0 }
> > +};
> > +
> > +static struct wl12xx_clock wl12xx_tcxoclock_table[] = {
>
> const
Duh! Thanks for noticing it.
--
Luca.
On Tue, Jul 02, 2013 at 05:55:44PM +0300, Luciano Coelho wrote:
> Since we are now using threaded IRQs without the primary handler, we
> need to set IRQF_ONESHOT, otherwise our request will fail.
>
> Signed-off-by: Luciano Coelho <[email protected]>
good to see this happening, I remember we talked about this a while back
:-)
Acked-by: Felipe Balbi <[email protected]>
Still, if you call irq_set_irq_type() on board-file (since DT will do
something similar for you anyway) then you can completely drop
irq_flags.
--
balbi
On Tue, 2013-07-02 at 18:32 +0300, Felipe Balbi wrote:
> On Tue, Jul 02, 2013 at 05:55:44PM +0300, Luciano Coelho wrote:
> > Since we are now using threaded IRQs without the primary handler, we
> > need to set IRQF_ONESHOT, otherwise our request will fail.
> >
> > Signed-off-by: Luciano Coelho <[email protected]>
>
> good to see this happening, I remember we talked about this a while back
> :-)
Yeah, we talked about it and I did the patch immediately. This is
needed because this is obviously not set automatically in the interrupts
created via device tree.
> Acked-by: Felipe Balbi <[email protected]>
>
> Still, if you call irq_set_irq_type() on board-file (since DT will do
> something similar for you anyway) then you can completely drop
> irq_flags.
Yep.
--
Luca.
* Luciano Coelho <[email protected]> [130702 13:33]:
> On Tue, 2013-07-02 at 10:02 -0500, Nishanth Menon wrote:
> > On 17:55-20130702, Luciano Coelho wrote:
> > > Instead of defining an enumeration with the FW specific values for the
> > > different clock rates, use the actual frequency instead. Also add a
> > > boolean to specify whether the clock is XTAL or not.
> > >
> > > Change all board files to reflect this.
> > >
> > > Cc: Tony Lindgren <[email protected]>
> > > Cc: Sekhar Nori <[email protected]>
> > > Signed-off-by: Luciano Coelho <[email protected]>
> > > ---
> > > arch/arm/mach-davinci/board-da850-evm.c | 3 +-
> > > arch/arm/mach-omap2/board-4430sdp.c | 5 ++-
> > ^^
> > > arch/arm/mach-omap2/board-omap3evm.c | 3 +-
> > > arch/arm/mach-omap2/board-omap4panda.c | 3 +-
> > ^^
> > Please do not add more platform data to platforms that are DT only.
>
> Ah, I hadn't realized that board_omap4panda.c and board-4430sdp.c had
> been removed in linux-next. I base my tree on wireless-next and it
> doesn't contain these changes yet. I would only have noticed this when
> I rebased my tree once the merge window is closed. ;)
>
> Thanks for pointing out, I'll make sure these changes will not be there
> when I send the pull request.
Please separate out the minimal pdata and arch/arm/mach-omap2 changes int
a immutable branch on v3.11-rc1 that I can also pull in. For v3.12, we're
going to be making more boards device tree only, so these changes may
otherwise cause pointless merge conflicts.
Regards,
Tony
Hi,
On Tue, Jul 02, 2013 at 05:55:41PM +0300, Luciano Coelho wrote:
> The platform_quirk element in the platform data was used to change the
> way the IRQ is triggered. When set, the EDGE_IRQ quirk would change
> the irqflags used and treat edge trigger differently from the rest.
>
> Instead of hiding this irq flag setting behind the quirk, export the
> whole irq_flags element and let the board file define what to use.
> This will be more meaningful than driver-specific quirks when we
> switch to DT.
>
> Cc: Tony Lindgren <[email protected]>
> Cc: Sekhar Nori <[email protected]>
> Signed-off-by: Luciano Coelho <[email protected]>
> Acked-by: Tony Lindgren <[email protected]>
> ---
> arch/arm/mach-davinci/board-da850-evm.c | 2 +-
> arch/arm/mach-omap2/board-4430sdp.c | 1 +
> arch/arm/mach-omap2/board-omap3evm.c | 1 +
> arch/arm/mach-omap2/board-omap4panda.c | 1 +
> arch/arm/mach-omap2/board-zoom-peripherals.c | 1 +
> drivers/net/wireless/ti/wlcore/debugfs.c | 2 +-
> drivers/net/wireless/ti/wlcore/main.c | 13 +++----------
> drivers/net/wireless/ti/wlcore/wlcore.h | 5 ++---
> include/linux/wl12xx.h | 5 +----
> 9 files changed, 12 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index 8a24b6c..d2a2a98 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -1377,8 +1377,8 @@ static const short da850_wl12xx_pins[] __initconst = {
>
> static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
> .irq = -1,
> + .irq_flags = IRQF_TRIGGER_RISING,
> .board_ref_clock = WL12XX_REFCLOCK_38,
> - .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
> };
>
> static __init int da850_wl12xx_init(void)
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index 56a9a4f..c2334aa 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -693,6 +693,7 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
> }
>
> static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
> + .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
couldn't you just call irq_set_irq_type() from the board-file itself ?
Then on your driver you can just pass IRQF_ONESHOT (to make sure heh) to
your request_threaded_irq_handler()
--
balbi
The pwr_in_suspend flag depends on the MMC settings which can be
retrieved from the SDIO subsystem, so it doesn't need to be part of
the platform data structure. Move it to the platform device data that
is passed from SDIO to wlcore.
Signed-off-by: Luciano Coelho <[email protected]>
---
drivers/net/wireless/ti/wlcore/main.c | 2 +-
drivers/net/wireless/ti/wlcore/sdio.c | 2 +-
drivers/net/wireless/ti/wlcore/wlcore_i.h | 1 +
include/linux/wl12xx.h | 1 -
4 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index e7294b8..d306cd5 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5941,7 +5941,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
if (!ret) {
wl->irq_wake_enabled = true;
device_init_wakeup(wl->dev, 1);
- if (pdata->pwr_in_suspend)
+ if (pdev_data->pwr_in_suspend)
wl->hw->wiphy->wowlan = &wlcore_wowlan_support;
}
#endif
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 29ef249..4c7e8ac 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -260,7 +260,7 @@ static int wl1271_probe(struct sdio_func *func,
dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
if (mmcflags & MMC_PM_KEEP_POWER)
- pdev_data->pdata->pwr_in_suspend = true;
+ pdev_data->pwr_in_suspend = true;
sdio_set_drvdata(func, glue);
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index e5e1464..f2c4227 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -209,6 +209,7 @@ struct wl1271_if_operations {
struct wlcore_platdev_data {
struct wl12xx_platform_data *pdata;
struct wl1271_if_operations *if_ops;
+ bool pwr_in_suspend;
};
#define MAX_NUM_KEYS 14
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index 04e3096..1e4ed6e 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -60,7 +60,6 @@ struct wl12xx_platform_data {
unsigned long irq_flags;
int board_ref_clock;
int board_tcxo_clock;
- bool pwr_in_suspend;
};
#ifdef CONFIG_WILINK_PLATFORM_DATA
--
1.7.10.4
Hi,
On Tue, Jul 2, 2013 at 5:55 PM, Luciano Coelho <[email protected]> wrote:
> Hi,
>
> This is a follow-up on a previous patch set that had a smaller
> audience. This time, I added the lists and people who were involved
> in the review of the bindings documentation, since most of my changes
> in v2 are coming from discussions there.
>
> This patch series adds device tree support to the wlcore_sdio driver,
> which is used by WiLink6, WiLink7 and WiLink8.
Could you perhaps consider doing device tree conversion for wl1251
too? With the knowledge you have from working on this series, it would
be much easier for you to do it than for someone else, and I don't
have much hope someone will do it at all. It's WiLink series chip
after all. Without this pandora and N900 are going to lose wifi
support after the switch to dt-only kernel.
I can offer you my help testing things on pandora and I'm sure someone
here could try it on N900.
--
Gražvydas
Add refclock and tcxoclock as clock providers in WiLink. These clocks
are not accesible outside the WiLink module, but they are registered
in the clock framework anyway. Only the WiLink chip consumes these
clocks.
In theory, the WiLink chip could be connected to external clocks
instead of using these internal clocks, so make the clock consumer
code generic enough. If external clocks are used, then the internal
clock device tree nodes are not necessary, but the external ones must
be specified.
Signed-off-by: Luciano Coelho <[email protected]>
---
drivers/net/wireless/ti/wlcore/sdio.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 9370d7e..980bf3d 100644
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -34,6 +34,7 @@
#include <linux/wl12xx.h>
#include <linux/pm_runtime.h>
#include <linux/printk.h>
+#include <linux/clk-provider.h>
#include "wlcore.h"
#include "wl12xx_80211.h"
@@ -214,10 +215,15 @@ static struct wl1271_if_operations sdio_ops = {
.set_block_size = wl1271_sdio_set_block_size,
};
+static const struct of_device_id wlcore_sdio_of_clk_match_table[] = {
+ { .compatible = "ti,wilink-clock" },
+};
+
static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev)
{
struct wl12xx_platform_data *pdata;
struct device_node *np = dev->of_node;
+ struct device_node *clock_node;
if (!np) {
np = of_find_matching_node(NULL, dev->driver->of_match_table);
@@ -241,6 +247,9 @@ static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev)
goto out_free;
}
+ for_each_matching_node(clock_node, wlcore_sdio_of_clk_match_table)
+ of_fixed_clk_setup(clock_node);
+
goto out;
out_free:
--
1.7.10.4
Move the wl1251 part of the wl12xx platform data structure into a new
structure specifically for wl1251. Change the platform data built-in
block and board files accordingly.
Cc: Tony Lindgren <[email protected]>
Signed-off-by: Luciano Coelho <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
---
arch/arm/mach-omap2/board-omap3pandora.c | 4 +--
arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +-
drivers/net/wireless/ti/wilink_platform_data.c | 37 ++++++++++++++++++++----
drivers/net/wireless/ti/wl1251/sdio.c | 12 ++++----
drivers/net/wireless/ti/wl1251/spi.c | 2 +-
include/linux/wl12xx.h | 22 +++++++++++++-
6 files changed, 62 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 28133d5..bf06d95 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -540,7 +540,7 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
static void __init pandora_wl1251_init(void)
{
- struct wl12xx_platform_data pandora_wl1251_pdata;
+ struct wl1251_platform_data pandora_wl1251_pdata;
int ret;
memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
@@ -554,7 +554,7 @@ static void __init pandora_wl1251_init(void)
goto fail_irq;
pandora_wl1251_pdata.use_eeprom = true;
- ret = wl12xx_set_platform_data(&pandora_wl1251_pdata);
+ ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
if (ret < 0)
goto fail_irq;
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 18ca61e..733f3f2 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -80,7 +80,7 @@ enum {
RX51_SPI_MIPID, /* LCD panel */
};
-static struct wl12xx_platform_data wl1251_pdata;
+static struct wl1251_platform_data wl1251_pdata;
static struct tsc2005_platform_data tsc2005_pdata;
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
diff --git a/drivers/net/wireless/ti/wilink_platform_data.c b/drivers/net/wireless/ti/wilink_platform_data.c
index 998e958..a92bd3e 100644
--- a/drivers/net/wireless/ti/wilink_platform_data.c
+++ b/drivers/net/wireless/ti/wilink_platform_data.c
@@ -23,17 +23,17 @@
#include <linux/err.h>
#include <linux/wl12xx.h>
-static struct wl12xx_platform_data *platform_data;
+static struct wl12xx_platform_data *wl12xx_platform_data;
int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
{
- if (platform_data)
+ if (wl12xx_platform_data)
return -EBUSY;
if (!data)
return -EINVAL;
- platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
- if (!platform_data)
+ wl12xx_platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
+ if (!wl12xx_platform_data)
return -ENOMEM;
return 0;
@@ -41,9 +41,34 @@ int __init wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
struct wl12xx_platform_data *wl12xx_get_platform_data(void)
{
- if (!platform_data)
+ if (!wl12xx_platform_data)
return ERR_PTR(-ENODEV);
- return platform_data;
+ return wl12xx_platform_data;
}
EXPORT_SYMBOL(wl12xx_get_platform_data);
+
+static struct wl1251_platform_data *wl1251_platform_data;
+
+int __init wl1251_set_platform_data(const struct wl1251_platform_data *data)
+{
+ if (wl1251_platform_data)
+ return -EBUSY;
+ if (!data)
+ return -EINVAL;
+
+ wl1251_platform_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
+ if (!wl1251_platform_data)
+ return -ENOMEM;
+
+ return 0;
+}
+
+struct wl1251_platform_data *wl1251_get_platform_data(void)
+{
+ if (!wl1251_platform_data)
+ return ERR_PTR(-ENODEV);
+
+ return wl1251_platform_data;
+}
+EXPORT_SYMBOL(wl1251_get_platform_data);
diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c
index e2b3d9c..b75a37a 100644
--- a/drivers/net/wireless/ti/wl1251/sdio.c
+++ b/drivers/net/wireless/ti/wl1251/sdio.c
@@ -227,7 +227,7 @@ static int wl1251_sdio_probe(struct sdio_func *func,
struct wl1251 *wl;
struct ieee80211_hw *hw;
struct wl1251_sdio *wl_sdio;
- const struct wl12xx_platform_data *wl12xx_board_data;
+ const struct wl1251_platform_data *wl1251_board_data;
hw = wl1251_alloc_hw();
if (IS_ERR(hw))
@@ -254,11 +254,11 @@ static int wl1251_sdio_probe(struct sdio_func *func,
wl->if_priv = wl_sdio;
wl->if_ops = &wl1251_sdio_ops;
- wl12xx_board_data = wl12xx_get_platform_data();
- if (!IS_ERR(wl12xx_board_data)) {
- wl->set_power = wl12xx_board_data->set_power;
- wl->irq = wl12xx_board_data->irq;
- wl->use_eeprom = wl12xx_board_data->use_eeprom;
+ wl1251_board_data = wl1251_get_platform_data();
+ if (!IS_ERR(wl1251_board_data)) {
+ wl->set_power = wl1251_board_data->set_power;
+ wl->irq = wl1251_board_data->irq;
+ wl->use_eeprom = wl1251_board_data->use_eeprom;
}
if (wl->irq) {
diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c
index c7dc6fe..6bbbfe6 100644
--- a/drivers/net/wireless/ti/wl1251/spi.c
+++ b/drivers/net/wireless/ti/wl1251/spi.c
@@ -238,7 +238,7 @@ static const struct wl1251_if_operations wl1251_spi_ops = {
static int wl1251_spi_probe(struct spi_device *spi)
{
- struct wl12xx_platform_data *pdata;
+ struct wl1251_platform_data *pdata;
struct ieee80211_hw *hw;
struct wl1251 *wl;
int ret;
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index a54fe82..b516b4f 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -48,11 +48,15 @@ enum {
WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
};
-struct wl12xx_platform_data {
+struct wl1251_platform_data {
void (*set_power)(bool enable);
/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
int irq;
bool use_eeprom;
+};
+
+struct wl12xx_platform_data {
+ int irq;
int board_ref_clock;
int board_tcxo_clock;
unsigned long platform_quirks;
@@ -68,6 +72,10 @@ int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+int wl1251_set_platform_data(const struct wl1251_platform_data *data);
+
+struct wl1251_platform_data *wl1251_get_platform_data(void);
+
#else
static inline
@@ -82,6 +90,18 @@ struct wl12xx_platform_data *wl12xx_get_platform_data(void)
return ERR_PTR(-ENODATA);
}
+static inline
+int wl1251_set_platform_data(const struct wl1251_platform_data *data)
+{
+ return -ENOSYS;
+}
+
+static inline
+struct wl1251_platform_data *wl1251_get_platform_data(void)
+{
+ return ERR_PTR(-ENODATA);
+}
+
#endif
#endif
--
1.7.10.4
On Tue, 2013-07-02 at 18:26 +0300, Felipe Balbi wrote:
> Hi,
>
> On Tue, Jul 02, 2013 at 05:55:41PM +0300, Luciano Coelho wrote:
> > The platform_quirk element in the platform data was used to change the
> > way the IRQ is triggered. When set, the EDGE_IRQ quirk would change
> > the irqflags used and treat edge trigger differently from the rest.
> >
> > Instead of hiding this irq flag setting behind the quirk, export the
> > whole irq_flags element and let the board file define what to use.
> > This will be more meaningful than driver-specific quirks when we
> > switch to DT.
> >
> > Cc: Tony Lindgren <[email protected]>
> > Cc: Sekhar Nori <[email protected]>
> > Signed-off-by: Luciano Coelho <[email protected]>
> > Acked-by: Tony Lindgren <[email protected]>
> > ---
> > arch/arm/mach-davinci/board-da850-evm.c | 2 +-
> > arch/arm/mach-omap2/board-4430sdp.c | 1 +
> > arch/arm/mach-omap2/board-omap3evm.c | 1 +
> > arch/arm/mach-omap2/board-omap4panda.c | 1 +
> > arch/arm/mach-omap2/board-zoom-peripherals.c | 1 +
> > drivers/net/wireless/ti/wlcore/debugfs.c | 2 +-
> > drivers/net/wireless/ti/wlcore/main.c | 13 +++----------
> > drivers/net/wireless/ti/wlcore/wlcore.h | 5 ++---
> > include/linux/wl12xx.h | 5 +----
> > 9 files changed, 12 insertions(+), 19 deletions(-)
> >
> > diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> > index 8a24b6c..d2a2a98 100644
> > --- a/arch/arm/mach-davinci/board-da850-evm.c
> > +++ b/arch/arm/mach-davinci/board-da850-evm.c
> > @@ -1377,8 +1377,8 @@ static const short da850_wl12xx_pins[] __initconst = {
> >
> > static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
> > .irq = -1,
> > + .irq_flags = IRQF_TRIGGER_RISING,
> > .board_ref_clock = WL12XX_REFCLOCK_38,
> > - .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
> > };
> >
> > static __init int da850_wl12xx_init(void)
> > diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> > index 56a9a4f..c2334aa 100644
> > --- a/arch/arm/mach-omap2/board-4430sdp.c
> > +++ b/arch/arm/mach-omap2/board-4430sdp.c
> > @@ -693,6 +693,7 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
> > }
> >
> > static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
> > + .irq_flags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
>
> couldn't you just call irq_set_irq_type() from the board-file itself ?
> Then on your driver you can just pass IRQF_ONESHOT (to make sure heh) to
> your request_threaded_irq_handler()
Good point. This is an oldish patch from the time I still thought I'd
have to pass the flags in the device tree. It turned out that I don't
need it anymore, so this can be totally removed from pdata and be set by
the board file itself.
As you saw in a later patch, I do make sure the driver sets
IRQF_ONESHOT. ;)
--
Cheers,
Luca.
Hi,
On Tue, Jul 02, 2013 at 05:55:47PM +0300, Luciano Coelho wrote:
> @@ -294,6 +316,8 @@ static int wl1271_probe(struct sdio_func *func,
> /* Use block mode for transferring over one block size of data */
> func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
>
> + sdio_set_drvdata(func, glue);
is this move really necessary ?
--
balbi
On Wed, 2013-07-03 at 04:33 -0700, Tony Lindgren wrote:
> * Luciano Coelho <[email protected]> [130702 13:33]:
> > On Tue, 2013-07-02 at 10:02 -0500, Nishanth Menon wrote:
> > > On 17:55-20130702, Luciano Coelho wrote:
> > > > Instead of defining an enumeration with the FW specific values for the
> > > > different clock rates, use the actual frequency instead. Also add a
> > > > boolean to specify whether the clock is XTAL or not.
> > > >
> > > > Change all board files to reflect this.
> > > >
> > > > Cc: Tony Lindgren <[email protected]>
> > > > Cc: Sekhar Nori <[email protected]>
> > > > Signed-off-by: Luciano Coelho <[email protected]>
> > > > ---
> > > > arch/arm/mach-davinci/board-da850-evm.c | 3 +-
> > > > arch/arm/mach-omap2/board-4430sdp.c | 5 ++-
> > > ^^
> > > > arch/arm/mach-omap2/board-omap3evm.c | 3 +-
> > > > arch/arm/mach-omap2/board-omap4panda.c | 3 +-
> > > ^^
> > > Please do not add more platform data to platforms that are DT only.
> >
> > Ah, I hadn't realized that board_omap4panda.c and board-4430sdp.c had
> > been removed in linux-next. I base my tree on wireless-next and it
> > doesn't contain these changes yet. I would only have noticed this when
> > I rebased my tree once the merge window is closed. ;)
> >
> > Thanks for pointing out, I'll make sure these changes will not be there
> > when I send the pull request.
>
> Please separate out the minimal pdata and arch/arm/mach-omap2 changes int
> a immutable branch on v3.11-rc1 that I can also pull in. For v3.12, we're
> going to be making more boards device tree only, so these changes may
> otherwise cause pointless merge conflicts.
Okay. I don't want to freeze my work, I'll continue using my
wireless-based tree (which is based on 3.10) for now. When the merge
window closes, I'll reorganize all this before sending pull requests, so
we can avoid conflicts.
Please ignore my changes to board files that will disappear on 3.11 and
keep reviewing the rest. ;)
--
Cheers,
Luca.
On Tue, Jul 02, 2013 at 05:55:46PM +0300, Luciano Coelho wrote:
> Add refclock and tcxoclock as clock providers in WiLink. These clocks
> are not accesible outside the WiLink module, but they are registered
> in the clock framework anyway. Only the WiLink chip consumes these
> clocks.
>
> In theory, the WiLink chip could be connected to external clocks
> instead of using these internal clocks, so make the clock consumer
> code generic enough. If external clocks are used, then the internal
> clock device tree nodes are not necessary, but the external ones must
> be specified.
>
> Signed-off-by: Luciano Coelho <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
--
balbi
Since we are now using threaded IRQs without the primary handler, we
need to set IRQF_ONESHOT, otherwise our request will fail.
Signed-off-by: Luciano Coelho <[email protected]>
---
drivers/net/wireless/ti/wlcore/main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index d306cd5..bc1cff3 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5927,7 +5927,8 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
wl->irq = platform_get_irq(pdev, 0);
wl->if_ops = pdev_data->if_ops;
- wl->irq_flags = pdata->irq_flags;
+ /* Since we don't use the primary handler, we must set ONESHOT */
+ wl->irq_flags = pdata->irq_flags | IRQF_ONESHOT;
ret = request_threaded_irq(wl->irq, NULL, wlcore_irq,
wl->irq_flags, pdev->name, wl);
--
1.7.10.4
On Wed, 2013-07-03 at 00:32 +0300, Felipe Balbi wrote:
> On Tue, Jul 02, 2013 at 11:19:54PM +0300, Luciano Coelho wrote:
> > On Tue, 2013-07-02 at 18:35 +0300, Felipe Balbi wrote:
> > > Hi,
> > >
> > > On Tue, Jul 02, 2013 at 05:55:47PM +0300, Luciano Coelho wrote:
> > > > @@ -294,6 +316,8 @@ static int wl1271_probe(struct sdio_func *func,
> > > > /* Use block mode for transferring over one block size of data */
> > > > func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
> > > >
> > > > + sdio_set_drvdata(func, glue);
> > >
> > > is this move really necessary ?
> >
> > It is, because I use the glue in wlcore_get_pdata_from_of(), so I need
> > to call sdio_set_drvdata() earlier. I reckoned it wouldn't hurt to move
> > this, so I wouldn't have to pass the glue in the
> > wlcore_get_pdata_from_of() call.
>
> that's alright, it does look like it deserves a mention in changelog
> though. Other than that:
Uh, ok. This was so tiny (and I thought so obvious) a change that I
didn't mention it. But if you asked about it, it was not obvious
enough. ;) I'll add a small comment about it in the commit message.
> Reviewed-by: Felipe Balbi <[email protected]>
Thanks!
--
Luca.
Hi,
On Tue, Jul 02, 2013 at 06:34:23PM +0300, Felipe Balbi wrote:
> On Tue, Jul 02, 2013 at 05:55:46PM +0300, Luciano Coelho wrote:
> > Add refclock and tcxoclock as clock providers in WiLink. These clocks
> > are not accesible outside the WiLink module, but they are registered
> > in the clock framework anyway. Only the WiLink chip consumes these
> > clocks.
> >
> > In theory, the WiLink chip could be connected to external clocks
> > instead of using these internal clocks, so make the clock consumer
> > code generic enough. If external clocks are used, then the internal
> > clock device tree nodes are not necessary, but the external ones must
> > be specified.
> >
> > Signed-off-by: Luciano Coelho <[email protected]>
>
> Acked-by: Felipe Balbi <[email protected]>
I guess this should've been
Reviewed-by: Felipe Balbi <[email protected]>
instead
--
balbi
On Tue, 2013-07-02 at 10:02 -0500, Nishanth Menon wrote:
> On 17:55-20130702, Luciano Coelho wrote:
> > Instead of defining an enumeration with the FW specific values for the
> > different clock rates, use the actual frequency instead. Also add a
> > boolean to specify whether the clock is XTAL or not.
> >
> > Change all board files to reflect this.
> >
> > Cc: Tony Lindgren <[email protected]>
> > Cc: Sekhar Nori <[email protected]>
> > Signed-off-by: Luciano Coelho <[email protected]>
> > ---
> > arch/arm/mach-davinci/board-da850-evm.c | 3 +-
> > arch/arm/mach-omap2/board-4430sdp.c | 5 ++-
> ^^
> > arch/arm/mach-omap2/board-omap3evm.c | 3 +-
> > arch/arm/mach-omap2/board-omap4panda.c | 3 +-
> ^^
> Please do not add more platform data to platforms that are DT only.
Ah, I hadn't realized that board_omap4panda.c and board-4430sdp.c had
been removed in linux-next. I base my tree on wireless-next and it
doesn't contain these changes yet. I would only have noticed this when
I rebased my tree once the merge window is closed. ;)
Thanks for pointing out, I'll make sure these changes will not be there
when I send the pull request.
--
Cheers,
Luca.
On Sun, Sep 22, 2013 at 03:36:32PM +0200, Pavel Machek wrote:
> > > > Unfortunately I don't have much time to work on wl1251. I think it
> > > > wouldn't be too difficult to do though, so patches are welcome. ;)
> > > >
> > > > Maybe you could try to make this change and I could support you if
> > > > needed?
> > > >
> > > >
> > > > > I can offer you my help testing things on pandora and I'm sure someone
> > > > > here could try it on N900.
> > > >
> > > > I could try it on the N900, if it is still bootable easily with the
> > > > mainline. ;)
> > >
> > > 3.11 should be bootable on mainline, including device tree and
> > > video. (But excluding some other stuff, like MMC.)
> >
> > I got external MMC (=> ?SD) working with some small modifications of
> > the omap3-n900.dts file. I have not yet tried internal MMC, since
> > its not important for me at the moment, but I guess its also just a
> > small change in the dts file.
>
> Can we get the diff? :-).
I will sent a patchset for the omap3-n900.dts file in the next days.
-- Sebastian
Hi!
> > > This is a follow-up on a previous patch set that had a smaller
> > > audience. This time, I added the lists and people who were involved
> > > in the review of the bindings documentation, since most of my changes
> > > in v2 are coming from discussions there.
> > >
> > > This patch series adds device tree support to the wlcore_sdio driver,
> > > which is used by WiLink6, WiLink7 and WiLink8.
> >
> > Could you perhaps consider doing device tree conversion for wl1251
> > too? With the knowledge you have from working on this series, it would
> > be much easier for you to do it than for someone else, and I don't
> > have much hope someone will do it at all. It's WiLink series chip
> > after all. Without this pandora and N900 are going to lose wifi
> > support after the switch to dt-only kernel.
>
> Unfortunately I don't have much time to work on wl1251. I think it
> wouldn't be too difficult to do though, so patches are welcome. ;)
>
> Maybe you could try to make this change and I could support you if
> needed?
>
>
> > I can offer you my help testing things on pandora and I'm sure someone
> > here could try it on N900.
>
> I could try it on the N900, if it is still bootable easily with the
> mainline. ;)
3.11 should be bootable on mainline, including device tree and
video. (But excluding some other stuff, like MMC.)
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Sat, Sep 21, 2013 at 02:27:18PM +0200, Pavel Machek wrote:
> Hi!
>
> > > > This is a follow-up on a previous patch set that had a smaller
> > > > audience. This time, I added the lists and people who were involved
> > > > in the review of the bindings documentation, since most of my changes
> > > > in v2 are coming from discussions there.
> > > >
> > > > This patch series adds device tree support to the wlcore_sdio driver,
> > > > which is used by WiLink6, WiLink7 and WiLink8.
> > >
> > > Could you perhaps consider doing device tree conversion for wl1251
> > > too? With the knowledge you have from working on this series, it would
> > > be much easier for you to do it than for someone else, and I don't
> > > have much hope someone will do it at all. It's WiLink series chip
> > > after all. Without this pandora and N900 are going to lose wifi
> > > support after the switch to dt-only kernel.
> >
> > Unfortunately I don't have much time to work on wl1251. I think it
> > wouldn't be too difficult to do though, so patches are welcome. ;)
> >
> > Maybe you could try to make this change and I could support you if
> > needed?
> >
> >
> > > I can offer you my help testing things on pandora and I'm sure someone
> > > here could try it on N900.
> >
> > I could try it on the N900, if it is still bootable easily with the
> > mainline. ;)
>
> 3.11 should be bootable on mainline, including device tree and
> video. (But excluding some other stuff, like MMC.)
I got external MMC (=> ?SD) working with some small modifications of
the omap3-n900.dts file. I have not yet tried internal MMC, since
its not important for me at the moment, but I guess its also just a
small change in the dts file.
-- Sebastian
Hi!
> > > Unfortunately I don't have much time to work on wl1251. I think it
> > > wouldn't be too difficult to do though, so patches are welcome. ;)
> > >
> > > Maybe you could try to make this change and I could support you if
> > > needed?
> > >
> > >
> > > > I can offer you my help testing things on pandora and I'm sure someone
> > > > here could try it on N900.
> > >
> > > I could try it on the N900, if it is still bootable easily with the
> > > mainline. ;)
> >
> > 3.11 should be bootable on mainline, including device tree and
> > video. (But excluding some other stuff, like MMC.)
>
> I got external MMC (=> ?SD) working with some small modifications of
> the omap3-n900.dts file. I have not yet tried internal MMC, since
> its not important for me at the moment, but I guess its also just a
> small change in the dts file.
Can we get the diff? :-).
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html