>From b4555081b1d27a31c22abede8e0397f1d61fbb04 Mon Sep 17 00:00:00 2001
From: Jeffrey Chu <[email protected]>
Date: Mon, 8 Jul 2013 17:50:21 -0400
Subject: [PATCH] Add bcm2079x-i2c driver for Bcm2079x NFC Controller.
Signed-off-by: Jeffrey Chu <[email protected]>
---
drivers/nfc/Kconfig | 1 +
drivers/nfc/Makefile | 1 +
drivers/nfc/bcm2079x/Kconfig | 10 +
drivers/nfc/bcm2079x/Makefile | 4 +
drivers/nfc/bcm2079x/bcm2079x-i2c.c | 416 +++++++++++++++++++++++++++++++++++
drivers/nfc/bcm2079x/bcm2079x.h | 34 +++
6 files changed, 466 insertions(+)
create mode 100644 drivers/nfc/bcm2079x/Kconfig
create mode 100644 drivers/nfc/bcm2079x/Makefile
create mode 100644 drivers/nfc/bcm2079x/bcm2079x-i2c.c
create mode 100644 drivers/nfc/bcm2079x/bcm2079x.h
diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
index 74a852e..fa540f4 100644
--- a/drivers/nfc/Kconfig
+++ b/drivers/nfc/Kconfig
@@ -38,5 +38,6 @@ config NFC_MEI_PHY
source "drivers/nfc/pn544/Kconfig"
source "drivers/nfc/microread/Kconfig"
+source "drivers/nfc/bcm2079x/Kconfig"
endmenu
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
index aa6bd65..a56adf6 100644
--- a/drivers/nfc/Makefile
+++ b/drivers/nfc/Makefile
@@ -7,5 +7,6 @@ obj-$(CONFIG_NFC_MICROREAD) += microread/
obj-$(CONFIG_NFC_PN533) += pn533.o
obj-$(CONFIG_NFC_WILINK) += nfcwilink.o
obj-$(CONFIG_NFC_MEI_PHY) += mei_phy.o
+obj-$(CONFIG_NFC_PN544) += bcm2079x/
ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
diff --git a/drivers/nfc/bcm2079x/Kconfig b/drivers/nfc/bcm2079x/Kconfig
new file mode 100644
index 0000000..889e181
--- /dev/null
+++ b/drivers/nfc/bcm2079x/Kconfig
@@ -0,0 +1,10 @@
+config NFC_BCM2079X_I2C
+ tristate "NFC BCM2079x i2c support"
+ depends on I2C
+ default n
+ ---help---
+ Broadcom BCM2079x i2c driver.
+ This is a driver that allows transporting NCI/HCI command and response
+ to/from Broadcom bcm2079x NFC Controller. Select this if your
+ platform is using i2c bus to controll this chip.
+
diff --git a/drivers/nfc/bcm2079x/Makefile b/drivers/nfc/bcm2079x/Makefile
new file mode 100644
index 0000000..be64d35
--- /dev/null
+++ b/drivers/nfc/bcm2079x/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for bcm2079x NFC driver
+#
+obj-$(CONFIG_NFC_BCM2079X_I2C) += bcm2079x-i2c.o
diff --git a/drivers/nfc/bcm2079x/bcm2079x-i2c.c b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
new file mode 100644
index 0000000..988a65e
--- /dev/null
+++ b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
@@ -0,0 +1,416 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/poll.h>
+
+#include "bcm2079x.h"
+
+/* do not change below */
+#define MAX_BUFFER_SIZE 780
+
+/* Read data */
+#define PACKET_HEADER_SIZE_NCI (4)
+#define PACKET_HEADER_SIZE_HCI (3)
+#define PACKET_TYPE_NCI (16)
+#define PACKET_TYPE_HCIEV (4)
+#define MAX_PACKET_SIZE (PACKET_HEADER_SIZE_NCI + 255)
+
+struct bcm2079x_dev {
+ wait_queue_head_t read_wq;
+ struct mutex read_mutex;
+ struct i2c_client *client;
+ struct miscdevice bcm2079x_device;
+ unsigned int wake_gpio;
+ unsigned int en_gpio;
+ unsigned int irq_gpio;
+ bool irq_enabled;
+ spinlock_t irq_enabled_lock;
+ unsigned int count_irq;
+};
+
+static void bcm2079x_init_stat(struct bcm2079x_dev *bcm2079x_dev)
+{
+ bcm2079x_dev->count_irq = 0;
+}
+
+static void bcm2079x_disable_irq(struct bcm2079x_dev *bcm2079x_dev)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
+ if (bcm2079x_dev->irq_enabled) {
+ disable_irq_nosync(bcm2079x_dev->client->irq);
+ bcm2079x_dev->irq_enabled = false;
+ }
+ spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
+}
+
+static void bcm2079x_enable_irq(struct bcm2079x_dev *bcm2079x_dev)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
+ if (!bcm2079x_dev->irq_enabled) {
+ bcm2079x_dev->irq_enabled = true;
+ enable_irq(bcm2079x_dev->client->irq);
+ }
+ spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
+}
+
+static void set_client_addr(struct bcm2079x_dev *bcm2079x_dev, int addr)
+{
+ struct i2c_client *client = bcm2079x_dev->client;
+ dev_info(&client->dev,
+ "Set client device address from 0x%04X flag = "
+ "%02x, to 0x%04X\n",
+ client->addr, client->flags, addr);
+ client->addr = addr;
+ if (addr < 0x80)
+ client->flags &= ~I2C_CLIENT_TEN;
+ else
+ client->flags |= I2C_CLIENT_TEN;
+}
+
+static irqreturn_t bcm2079x_dev_irq_handler(int irq, void *dev_id)
+{
+ struct bcm2079x_dev *bcm2079x_dev = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
+ bcm2079x_dev->count_irq++;
+ spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
+ wake_up(&bcm2079x_dev->read_wq);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int bcm2079x_dev_poll(struct file *filp, poll_table *wait)
+{
+ struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
+ unsigned int mask = 0;
+ unsigned long flags;
+
+ poll_wait(filp, &bcm2079x_dev->read_wq, wait);
+
+ spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
+ if (bcm2079x_dev->count_irq > 0) {
+ bcm2079x_dev->count_irq--;
+ mask |= POLLIN | POLLRDNORM;
+ }
+ spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
+
+ return mask;
+}
+
+static ssize_t bcm2079x_dev_read(struct file *filp, char __user *buf,
+ size_t count, loff_t *offset)
+{
+ struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
+ unsigned char tmp[MAX_BUFFER_SIZE];
+ int total, len, ret;
+
+ total = 0;
+ len = 0;
+
+ if (count > MAX_BUFFER_SIZE)
+ count = MAX_BUFFER_SIZE;
+
+ mutex_lock(&bcm2079x_dev->read_mutex);
+
+ /* Read the first 4 bytes to include the length of the NCI or
+ HCI packet.*/
+ ret = i2c_master_recv(bcm2079x_dev->client, tmp, 4);
+ if (ret == 4) {
+ total = ret;
+ /* First byte is the packet type*/
+ switch (tmp[0]) {
+ case PACKET_TYPE_NCI:
+ len = tmp[PACKET_HEADER_SIZE_NCI-1];
+ break;
+
+ case PACKET_TYPE_HCIEV:
+ len = tmp[PACKET_HEADER_SIZE_HCI-1];
+ if (len == 0)
+ total--;
+ else
+ len--;
+ break;
+
+ default:
+ len = 0;/*Unknown packet byte */
+ break;
+ } /* switch*/
+
+ /* make sure full packet fits in the buffer*/
+ if (len > 0 && (len + total) <= count) {
+ /** read the remainder of the packet.
+ **/
+ ret = i2c_master_recv(bcm2079x_dev->client, tmp+total,
+ len);
+ if (ret == len)
+ total += len;
+ } /* if */
+ } /* if */
+
+ mutex_unlock(&bcm2079x_dev->read_mutex);
+
+ if (total > count || copy_to_user(buf, tmp, total)) {
+ dev_err(&bcm2079x_dev->client->dev,
+ "failed to copy to user space, total = %d\n", total);
+ total = -EFAULT;
+ }
+
+ return total;
+}
+
+static ssize_t bcm2079x_dev_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *offset)
+{
+ struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
+ char tmp[MAX_BUFFER_SIZE];
+ int ret;
+
+ if (count > MAX_BUFFER_SIZE) {
+ dev_err(&bcm2079x_dev->client->dev, "out of memory\n");
+ return -ENOMEM;
+ }
+
+ if (copy_from_user(tmp, buf, count)) {
+ dev_err(&bcm2079x_dev->client->dev,
+ "failed to copy from user space\n");
+ return -EFAULT;
+ }
+
+ mutex_lock(&bcm2079x_dev->read_mutex);
+ /* Write data */
+
+ ret = i2c_master_send(bcm2079x_dev->client, tmp, count);
+ if (ret != count) {
+ dev_err(&bcm2079x_dev->client->dev,
+ "failed to write %d\n", ret);
+ ret = -EIO;
+ }
+ mutex_unlock(&bcm2079x_dev->read_mutex);
+
+ return ret;
+}
+
+static int bcm2079x_dev_open(struct inode *inode, struct file *filp)
+{
+ int ret = 0;
+
+ struct bcm2079x_dev *bcm2079x_dev = container_of(filp->private_data,
+ struct bcm2079x_dev,
+ bcm2079x_device);
+ filp->private_data = bcm2079x_dev;
+ bcm2079x_init_stat(bcm2079x_dev);
+ bcm2079x_enable_irq(bcm2079x_dev);
+ dev_info(&bcm2079x_dev->client->dev,
+ "%d,%d\n", imajor(inode), iminor(inode));
+
+ return ret;
+}
+
+static long bcm2079x_dev_unlocked_ioctl(struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
+
+ switch (cmd) {
+ case BCMNFC_POWER_CTL:
+ gpio_set_value(bcm2079x_dev->en_gpio, arg);
+ break;
+ case BCMNFC_WAKE_CTL:
+ gpio_set_value(bcm2079x_dev->wake_gpio, arg);
+ break;
+ case BCMNFC_SET_ADDR:
+ set_client_addr(bcm2079x_dev, arg);
+ break;
+ default:
+ dev_err(&bcm2079x_dev->client->dev,
+ "%s, unknown cmd (%x, %lx)\n", __func__, cmd, arg);
+ return -ENOSYS;
+ }
+
+ return 0;
+}
+
+static const struct file_operations bcm2079x_dev_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .poll = bcm2079x_dev_poll,
+ .read = bcm2079x_dev_read,
+ .write = bcm2079x_dev_write,
+ .open = bcm2079x_dev_open,
+ .unlocked_ioctl = bcm2079x_dev_unlocked_ioctl
+};
+
+static int bcm2079x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct bcm2079x_platform_data *platform_data;
+ struct bcm2079x_dev *bcm2079x_dev;
+
+ platform_data = client->dev.platform_data;
+
+ dev_info(&client->dev, "%s, probing bcm2079x driver flags = %x\n",
+ __func__, client->flags);
+ if (platform_data == NULL) {
+ dev_err(&client->dev, "nfc probe fail\n");
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "need I2C_FUNC_I2C\n");
+ return -ENODEV;
+ }
+
+ ret = gpio_request_one(platform_data->irq_gpio, GPIOF_IN, "nfc_irq");
+ if (ret)
+ return -ENODEV;
+ ret = gpio_request_one(platform_data->en_gpio, GPIOF_OUT_INIT_LOW,
+ "nfc_en");
+ if (ret)
+ goto err_en;
+ ret = gpio_request_one(platform_data->wake_gpio, GPIOF_OUT_INIT_LOW,
+ "nfc_wake");
+ if (ret)
+ goto err_wake;
+
+ gpio_set_value(platform_data->en_gpio, 0);
+ gpio_set_value(platform_data->wake_gpio, 0);
+
+ bcm2079x_dev = kzalloc(sizeof(*bcm2079x_dev), GFP_KERNEL);
+ if (bcm2079x_dev == NULL) {
+ dev_err(&client->dev,
+ "failed to allocate memory for module data\n");
+ ret = -ENOMEM;
+ goto err_exit;
+ }
+
+ bcm2079x_dev->wake_gpio = platform_data->wake_gpio;
+ bcm2079x_dev->irq_gpio = platform_data->irq_gpio;
+ bcm2079x_dev->en_gpio = platform_data->en_gpio;
+ bcm2079x_dev->client = client;
+
+ /* init mutex and queues */
+ init_waitqueue_head(&bcm2079x_dev->read_wq);
+ mutex_init(&bcm2079x_dev->read_mutex);
+ spin_lock_init(&bcm2079x_dev->irq_enabled_lock);
+
+ bcm2079x_dev->bcm2079x_device.minor = MISC_DYNAMIC_MINOR;
+ bcm2079x_dev->bcm2079x_device.name = "bcm2079x-i2c";
+ bcm2079x_dev->bcm2079x_device.fops = &bcm2079x_dev_fops;
+
+ ret = misc_register(&bcm2079x_dev->bcm2079x_device);
+ if (ret) {
+ dev_err(&client->dev, "misc_register failed\n");
+ goto err_misc_register;
+ }
+
+ /* request irq. the irq is set whenever the chip has data available
+ * for reading. it is cleared when all data has been read.
+ */
+ dev_info(&client->dev, "requesting IRQ %d\n", client->irq);
+ bcm2079x_dev->irq_enabled = true;
+ ret = request_irq(client->irq, bcm2079x_dev_irq_handler,
+ IRQF_TRIGGER_RISING, client->name, bcm2079x_dev);
+ if (ret) {
+ dev_err(&client->dev, "request_irq failed\n");
+ goto err_request_irq_failed;
+ }
+ bcm2079x_disable_irq(bcm2079x_dev);
+ i2c_set_clientdata(client, bcm2079x_dev);
+ dev_info(&client->dev,
+ "%s, probing bcm2079x driver exited successfully\n",
+ __func__);
+ return 0;
+
+err_request_irq_failed:
+ misc_deregister(&bcm2079x_dev->bcm2079x_device);
+err_misc_register:
+ mutex_destroy(&bcm2079x_dev->read_mutex);
+ kfree(bcm2079x_dev);
+err_exit:
+ gpio_free(platform_data->wake_gpio);
+err_wake:
+ gpio_free(platform_data->en_gpio);
+err_en:
+ gpio_free(platform_data->irq_gpio);
+ return ret;
+}
+
+static int bcm2079x_remove(struct i2c_client *client)
+{
+ struct bcm2079x_dev *bcm2079x_dev;
+
+ bcm2079x_dev = i2c_get_clientdata(client);
+ free_irq(client->irq, bcm2079x_dev);
+ misc_deregister(&bcm2079x_dev->bcm2079x_device);
+ mutex_destroy(&bcm2079x_dev->read_mutex);
+ gpio_free(bcm2079x_dev->irq_gpio);
+ gpio_free(bcm2079x_dev->en_gpio);
+ gpio_free(bcm2079x_dev->wake_gpio);
+ kfree(bcm2079x_dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id bcm2079x_id[] = {
+ {"bcm2079x-i2c", 0},
+ {}
+};
+
+static struct i2c_driver bcm2079x_driver = {
+ .id_table = bcm2079x_id,
+ .probe = bcm2079x_probe,
+ .remove = bcm2079x_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "bcm2079x-i2c",
+ },
+};
+
+/*
+ * module load/unload record keeping
+ */
+
+static int __init bcm2079x_dev_init(void)
+{
+ return i2c_add_driver(&bcm2079x_driver);
+}
+module_init(bcm2079x_dev_init);
+
+static void __exit bcm2079x_dev_exit(void)
+{
+ i2c_del_driver(&bcm2079x_driver);
+}
+module_exit(bcm2079x_dev_exit);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("NFC bcm2079x driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/bcm2079x/bcm2079x.h b/drivers/nfc/bcm2079x/bcm2079x.h
new file mode 100644
index 0000000..b8b243f
--- /dev/null
+++ b/drivers/nfc/bcm2079x/bcm2079x.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _BCM2079X_H
+#define _BCM2079X_H
+
+#define BCMNFC_MAGIC 0xFA
+
+#define BCMNFC_POWER_CTL _IO(BCMNFC_MAGIC, 0x01)
+#define BCMNFC_WAKE_CTL _IO(BCMNFC_MAGIC, 0x05)
+#define BCMNFC_SET_ADDR _IO(BCMNFC_MAGIC, 0x07)
+
+struct bcm2079x_platform_data {
+ unsigned int irq_gpio;
+ unsigned int en_gpio;
+ unsigned int wake_gpio;
+};
+
+#endif
--
1.7.9.5
On Mon, 2013-07-08 at 21:52 +0000, Jeffrey (Sheng-Hui) Chu wrote:
[]
> diff --git a/drivers/nfc/bcm2079x/bcm2079x-i2c.c b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
[]
> +/* do not change below */
> +#define MAX_BUFFER_SIZE 780
[]
> +static ssize_t bcm2079x_dev_read(struct file *filp, char __user *buf,
> + size_t count, loff_t *offset)
> +{
> + struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> + unsigned char tmp[MAX_BUFFER_SIZE];
780 bytes on stack isn't a great idea.
> +static ssize_t bcm2079x_dev_write(struct file *filp, const char __user *buf,
> + size_t count, loff_t *offset)
> +{
> + struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> + char tmp[MAX_BUFFER_SIZE];
etc.
> + int ret;
> +
> + if (count > MAX_BUFFER_SIZE) {
> + dev_err(&bcm2079x_dev->client->dev, "out of memory\n");
Out of memory isn't really true.
The packet size is just too big for your
little buffer.
> +static int bcm2079x_dev_open(struct inode *inode, struct file *filp)
> +{
> + int ret = 0;
> +
> + struct bcm2079x_dev *bcm2079x_dev = container_of(filp->private_data,
> + struct bcm2079x_dev,
> + bcm2079x_device);
> + filp->private_data = bcm2079x_dev;
> + bcm2079x_init_stat(bcm2079x_dev);
> + bcm2079x_enable_irq(bcm2079x_dev);
> + dev_info(&bcm2079x_dev->client->dev,
> + "%d,%d\n", imajor(inode), iminor(inode));
Looks to me like this should be dev_dbg not dev_info
+ Samuel
On 07/08/2013 11:52 PM, Jeffrey (Sheng-Hui) Chu wrote:
> From b4555081b1d27a31c22abede8e0397f1d61fbb04 Mon Sep 17 00:00:00 2001
> From: Jeffrey Chu <[email protected]>
> Date: Mon, 8 Jul 2013 17:50:21 -0400
> Subject: [PATCH] Add bcm2079x-i2c driver for Bcm2079x NFC Controller.
The subject did not show in my mailbox. Not sure if necessary, but I
tend to send patches to a maintainer and CC the appropriate list(s). So
the nfc list as well ([email protected]).
Regards,
Arend
> Signed-off-by: Jeffrey Chu <[email protected]>
> ---
> drivers/nfc/Kconfig | 1 +
> drivers/nfc/Makefile | 1 +
> drivers/nfc/bcm2079x/Kconfig | 10 +
> drivers/nfc/bcm2079x/Makefile | 4 +
> drivers/nfc/bcm2079x/bcm2079x-i2c.c | 416 +++++++++++++++++++++++++++++++++++
> drivers/nfc/bcm2079x/bcm2079x.h | 34 +++
> 6 files changed, 466 insertions(+)
> create mode 100644 drivers/nfc/bcm2079x/Kconfig
> create mode 100644 drivers/nfc/bcm2079x/Makefile
> create mode 100644 drivers/nfc/bcm2079x/bcm2079x-i2c.c
> create mode 100644 drivers/nfc/bcm2079x/bcm2079x.h
>
> diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
> index 74a852e..fa540f4 100644
> --- a/drivers/nfc/Kconfig
> +++ b/drivers/nfc/Kconfig
> @@ -38,5 +38,6 @@ config NFC_MEI_PHY
>
> source "drivers/nfc/pn544/Kconfig"
> source "drivers/nfc/microread/Kconfig"
> +source "drivers/nfc/bcm2079x/Kconfig"
>
> endmenu
> diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
> index aa6bd65..a56adf6 100644
> --- a/drivers/nfc/Makefile
> +++ b/drivers/nfc/Makefile
> @@ -7,5 +7,6 @@ obj-$(CONFIG_NFC_MICROREAD) += microread/
> obj-$(CONFIG_NFC_PN533) += pn533.o
> obj-$(CONFIG_NFC_WILINK) += nfcwilink.o
> obj-$(CONFIG_NFC_MEI_PHY) += mei_phy.o
> +obj-$(CONFIG_NFC_PN544) += bcm2079x/
I suspect this is a copy-paste error right? Should be
obj-$(CONFIG_NFC_BCM2079X_I2C).
>
> ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
> diff --git a/drivers/nfc/bcm2079x/Kconfig b/drivers/nfc/bcm2079x/Kconfig
> new file mode 100644
> index 0000000..889e181
> --- /dev/null
> +++ b/drivers/nfc/bcm2079x/Kconfig
> @@ -0,0 +1,10 @@
> +config NFC_BCM2079X_I2C
> + tristate "NFC BCM2079x i2c support"
> + depends on I2C
> + default n
> + ---help---
> + Broadcom BCM2079x i2c driver.
> + This is a driver that allows transporting NCI/HCI command and response
> + to/from Broadcom bcm2079x NFC Controller. Select this if your
> + platform is using i2c bus to controll this chip.
> +
> diff --git a/drivers/nfc/bcm2079x/Makefile b/drivers/nfc/bcm2079x/Makefile
> new file mode 100644
> index 0000000..be64d35
> --- /dev/null
> +++ b/drivers/nfc/bcm2079x/Makefile
> @@ -0,0 +1,4 @@
> +#
> +# Makefile for bcm2079x NFC driver
> +#
> +obj-$(CONFIG_NFC_BCM2079X_I2C) += bcm2079x-i2c.o
> diff --git a/drivers/nfc/bcm2079x/bcm2079x-i2c.c b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
> new file mode 100644
> index 0000000..988a65e
> --- /dev/null
> +++ b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
> @@ -0,0 +1,416 @@
> +/*
> + * Copyright (C) 2013 Broadcom Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/fs.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/miscdevice.h>
> +#include <linux/spinlock.h>
> +#include <linux/poll.h>
> +
> +#include "bcm2079x.h"
> +
> +/* do not change below */
> +#define MAX_BUFFER_SIZE 780
> +
> +/* Read data */
> +#define PACKET_HEADER_SIZE_NCI (4)
> +#define PACKET_HEADER_SIZE_HCI (3)
> +#define PACKET_TYPE_NCI (16)
> +#define PACKET_TYPE_HCIEV (4)
> +#define MAX_PACKET_SIZE (PACKET_HEADER_SIZE_NCI + 255)
> +
> +struct bcm2079x_dev {
> + wait_queue_head_t read_wq;
> + struct mutex read_mutex;
> + struct i2c_client *client;
> + struct miscdevice bcm2079x_device;
> + unsigned int wake_gpio;
> + unsigned int en_gpio;
> + unsigned int irq_gpio;
> + bool irq_enabled;
> + spinlock_t irq_enabled_lock;
> + unsigned int count_irq;
> +};
> +
> +static void bcm2079x_init_stat(struct bcm2079x_dev *bcm2079x_dev)
> +{
> + bcm2079x_dev->count_irq = 0;
> +}
> +
> +static void bcm2079x_disable_irq(struct bcm2079x_dev *bcm2079x_dev)
> +{
> + unsigned long flags;
> + spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
> + if (bcm2079x_dev->irq_enabled) {
> + disable_irq_nosync(bcm2079x_dev->client->irq);
> + bcm2079x_dev->irq_enabled = false;
> + }
> + spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
> +}
> +
> +static void bcm2079x_enable_irq(struct bcm2079x_dev *bcm2079x_dev)
> +{
> + unsigned long flags;
> + spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
> + if (!bcm2079x_dev->irq_enabled) {
> + bcm2079x_dev->irq_enabled = true;
> + enable_irq(bcm2079x_dev->client->irq);
> + }
> + spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
> +}
> +
> +static void set_client_addr(struct bcm2079x_dev *bcm2079x_dev, int addr)
> +{
> + struct i2c_client *client = bcm2079x_dev->client;
> + dev_info(&client->dev,
> + "Set client device address from 0x%04X flag = "
> + "%02x, to 0x%04X\n",
> + client->addr, client->flags, addr);
> + client->addr = addr;
> + if (addr < 0x80)
> + client->flags &= ~I2C_CLIENT_TEN;
> + else
> + client->flags |= I2C_CLIENT_TEN;
> +}
> +
> +static irqreturn_t bcm2079x_dev_irq_handler(int irq, void *dev_id)
> +{
> + struct bcm2079x_dev *bcm2079x_dev = dev_id;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
> + bcm2079x_dev->count_irq++;
> + spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
> + wake_up(&bcm2079x_dev->read_wq);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static unsigned int bcm2079x_dev_poll(struct file *filp, poll_table *wait)
> +{
> + struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> + unsigned int mask = 0;
> + unsigned long flags;
> +
> + poll_wait(filp, &bcm2079x_dev->read_wq, wait);
> +
> + spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
> + if (bcm2079x_dev->count_irq > 0) {
> + bcm2079x_dev->count_irq--;
> + mask |= POLLIN | POLLRDNORM;
> + }
> + spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
> +
> + return mask;
> +}
> +
> +static ssize_t bcm2079x_dev_read(struct file *filp, char __user *buf,
> + size_t count, loff_t *offset)
> +{
> + struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> + unsigned char tmp[MAX_BUFFER_SIZE];
> + int total, len, ret;
> +
> + total = 0;
> + len = 0;
> +
> + if (count > MAX_BUFFER_SIZE)
> + count = MAX_BUFFER_SIZE;
> +
> + mutex_lock(&bcm2079x_dev->read_mutex);
> +
> + /* Read the first 4 bytes to include the length of the NCI or
> + HCI packet.*/
> + ret = i2c_master_recv(bcm2079x_dev->client, tmp, 4);
> + if (ret == 4) {
> + total = ret;
> + /* First byte is the packet type*/
> + switch (tmp[0]) {
> + case PACKET_TYPE_NCI:
> + len = tmp[PACKET_HEADER_SIZE_NCI-1];
> + break;
> +
> + case PACKET_TYPE_HCIEV:
> + len = tmp[PACKET_HEADER_SIZE_HCI-1];
> + if (len == 0)
> + total--;
> + else
> + len--;
> + break;
> +
> + default:
> + len = 0;/*Unknown packet byte */
> + break;
> + } /* switch*/
> +
> + /* make sure full packet fits in the buffer*/
> + if (len > 0 && (len + total) <= count) {
> + /** read the remainder of the packet.
> + **/
> + ret = i2c_master_recv(bcm2079x_dev->client, tmp+total,
> + len);
> + if (ret == len)
> + total += len;
> + } /* if */
> + } /* if */
> +
> + mutex_unlock(&bcm2079x_dev->read_mutex);
> +
> + if (total > count || copy_to_user(buf, tmp, total)) {
> + dev_err(&bcm2079x_dev->client->dev,
> + "failed to copy to user space, total = %d\n", total);
> + total = -EFAULT;
> + }
> +
> + return total;
> +}
> +
> +static ssize_t bcm2079x_dev_write(struct file *filp, const char __user *buf,
> + size_t count, loff_t *offset)
> +{
> + struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> + char tmp[MAX_BUFFER_SIZE];
> + int ret;
> +
> + if (count > MAX_BUFFER_SIZE) {
> + dev_err(&bcm2079x_dev->client->dev, "out of memory\n");
> + return -ENOMEM;
> + }
> +
> + if (copy_from_user(tmp, buf, count)) {
> + dev_err(&bcm2079x_dev->client->dev,
> + "failed to copy from user space\n");
> + return -EFAULT;
> + }
> +
> + mutex_lock(&bcm2079x_dev->read_mutex);
> + /* Write data */
> +
> + ret = i2c_master_send(bcm2079x_dev->client, tmp, count);
> + if (ret != count) {
> + dev_err(&bcm2079x_dev->client->dev,
> + "failed to write %d\n", ret);
> + ret = -EIO;
> + }
> + mutex_unlock(&bcm2079x_dev->read_mutex);
> +
> + return ret;
> +}
> +
> +static int bcm2079x_dev_open(struct inode *inode, struct file *filp)
> +{
> + int ret = 0;
> +
> + struct bcm2079x_dev *bcm2079x_dev = container_of(filp->private_data,
> + struct bcm2079x_dev,
> + bcm2079x_device);
> + filp->private_data = bcm2079x_dev;
> + bcm2079x_init_stat(bcm2079x_dev);
> + bcm2079x_enable_irq(bcm2079x_dev);
> + dev_info(&bcm2079x_dev->client->dev,
> + "%d,%d\n", imajor(inode), iminor(inode));
> +
> + return ret;
> +}
> +
> +static long bcm2079x_dev_unlocked_ioctl(struct file *filp,
> + unsigned int cmd, unsigned long arg)
> +{
> + struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> +
> + switch (cmd) {
> + case BCMNFC_POWER_CTL:
> + gpio_set_value(bcm2079x_dev->en_gpio, arg);
> + break;
> + case BCMNFC_WAKE_CTL:
> + gpio_set_value(bcm2079x_dev->wake_gpio, arg);
> + break;
> + case BCMNFC_SET_ADDR:
> + set_client_addr(bcm2079x_dev, arg);
> + break;
> + default:
> + dev_err(&bcm2079x_dev->client->dev,
> + "%s, unknown cmd (%x, %lx)\n", __func__, cmd, arg);
> + return -ENOSYS;
> + }
> +
> + return 0;
> +}
> +
> +static const struct file_operations bcm2079x_dev_fops = {
> + .owner = THIS_MODULE,
> + .llseek = no_llseek,
> + .poll = bcm2079x_dev_poll,
> + .read = bcm2079x_dev_read,
> + .write = bcm2079x_dev_write,
> + .open = bcm2079x_dev_open,
> + .unlocked_ioctl = bcm2079x_dev_unlocked_ioctl
> +};
> +
> +static int bcm2079x_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + int ret;
> + struct bcm2079x_platform_data *platform_data;
> + struct bcm2079x_dev *bcm2079x_dev;
> +
> + platform_data = client->dev.platform_data;
> +
> + dev_info(&client->dev, "%s, probing bcm2079x driver flags = %x\n",
> + __func__, client->flags);
> + if (platform_data == NULL) {
> + dev_err(&client->dev, "nfc probe fail\n");
> + return -ENODEV;
> + }
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> + dev_err(&client->dev, "need I2C_FUNC_I2C\n");
> + return -ENODEV;
> + }
> +
> + ret = gpio_request_one(platform_data->irq_gpio, GPIOF_IN, "nfc_irq");
> + if (ret)
> + return -ENODEV;
> + ret = gpio_request_one(platform_data->en_gpio, GPIOF_OUT_INIT_LOW,
> + "nfc_en");
> + if (ret)
> + goto err_en;
> + ret = gpio_request_one(platform_data->wake_gpio, GPIOF_OUT_INIT_LOW,
> + "nfc_wake");
> + if (ret)
> + goto err_wake;
> +
> + gpio_set_value(platform_data->en_gpio, 0);
> + gpio_set_value(platform_data->wake_gpio, 0);
> +
> + bcm2079x_dev = kzalloc(sizeof(*bcm2079x_dev), GFP_KERNEL);
> + if (bcm2079x_dev == NULL) {
> + dev_err(&client->dev,
> + "failed to allocate memory for module data\n");
> + ret = -ENOMEM;
> + goto err_exit;
> + }
> +
> + bcm2079x_dev->wake_gpio = platform_data->wake_gpio;
> + bcm2079x_dev->irq_gpio = platform_data->irq_gpio;
> + bcm2079x_dev->en_gpio = platform_data->en_gpio;
> + bcm2079x_dev->client = client;
> +
> + /* init mutex and queues */
> + init_waitqueue_head(&bcm2079x_dev->read_wq);
> + mutex_init(&bcm2079x_dev->read_mutex);
> + spin_lock_init(&bcm2079x_dev->irq_enabled_lock);
> +
> + bcm2079x_dev->bcm2079x_device.minor = MISC_DYNAMIC_MINOR;
> + bcm2079x_dev->bcm2079x_device.name = "bcm2079x-i2c";
> + bcm2079x_dev->bcm2079x_device.fops = &bcm2079x_dev_fops;
> +
> + ret = misc_register(&bcm2079x_dev->bcm2079x_device);
> + if (ret) {
> + dev_err(&client->dev, "misc_register failed\n");
> + goto err_misc_register;
> + }
> +
> + /* request irq. the irq is set whenever the chip has data available
> + * for reading. it is cleared when all data has been read.
> + */
> + dev_info(&client->dev, "requesting IRQ %d\n", client->irq);
> + bcm2079x_dev->irq_enabled = true;
> + ret = request_irq(client->irq, bcm2079x_dev_irq_handler,
> + IRQF_TRIGGER_RISING, client->name, bcm2079x_dev);
> + if (ret) {
> + dev_err(&client->dev, "request_irq failed\n");
> + goto err_request_irq_failed;
> + }
> + bcm2079x_disable_irq(bcm2079x_dev);
> + i2c_set_clientdata(client, bcm2079x_dev);
> + dev_info(&client->dev,
> + "%s, probing bcm2079x driver exited successfully\n",
> + __func__);
> + return 0;
> +
> +err_request_irq_failed:
> + misc_deregister(&bcm2079x_dev->bcm2079x_device);
> +err_misc_register:
> + mutex_destroy(&bcm2079x_dev->read_mutex);
> + kfree(bcm2079x_dev);
> +err_exit:
> + gpio_free(platform_data->wake_gpio);
> +err_wake:
> + gpio_free(platform_data->en_gpio);
> +err_en:
> + gpio_free(platform_data->irq_gpio);
> + return ret;
> +}
> +
> +static int bcm2079x_remove(struct i2c_client *client)
> +{
> + struct bcm2079x_dev *bcm2079x_dev;
> +
> + bcm2079x_dev = i2c_get_clientdata(client);
> + free_irq(client->irq, bcm2079x_dev);
> + misc_deregister(&bcm2079x_dev->bcm2079x_device);
> + mutex_destroy(&bcm2079x_dev->read_mutex);
> + gpio_free(bcm2079x_dev->irq_gpio);
> + gpio_free(bcm2079x_dev->en_gpio);
> + gpio_free(bcm2079x_dev->wake_gpio);
> + kfree(bcm2079x_dev);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id bcm2079x_id[] = {
> + {"bcm2079x-i2c", 0},
> + {}
> +};
> +
> +static struct i2c_driver bcm2079x_driver = {
> + .id_table = bcm2079x_id,
> + .probe = bcm2079x_probe,
> + .remove = bcm2079x_remove,
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "bcm2079x-i2c",
> + },
> +};
> +
> +/*
> + * module load/unload record keeping
> + */
> +
> +static int __init bcm2079x_dev_init(void)
> +{
> + return i2c_add_driver(&bcm2079x_driver);
> +}
> +module_init(bcm2079x_dev_init);
> +
> +static void __exit bcm2079x_dev_exit(void)
> +{
> + i2c_del_driver(&bcm2079x_driver);
> +}
> +module_exit(bcm2079x_dev_exit);
> +
> +MODULE_AUTHOR("Broadcom");
> +MODULE_DESCRIPTION("NFC bcm2079x driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/nfc/bcm2079x/bcm2079x.h b/drivers/nfc/bcm2079x/bcm2079x.h
> new file mode 100644
> index 0000000..b8b243f
> --- /dev/null
> +++ b/drivers/nfc/bcm2079x/bcm2079x.h
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright (C) 2013 Broadcom Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#ifndef _BCM2079X_H
> +#define _BCM2079X_H
> +
> +#define BCMNFC_MAGIC 0xFA
> +
> +#define BCMNFC_POWER_CTL _IO(BCMNFC_MAGIC, 0x01)
> +#define BCMNFC_WAKE_CTL _IO(BCMNFC_MAGIC, 0x05)
> +#define BCMNFC_SET_ADDR _IO(BCMNFC_MAGIC, 0x07)
> +
> +struct bcm2079x_platform_data {
> + unsigned int irq_gpio;
> + unsigned int en_gpio;
> + unsigned int wake_gpio;
> +};
> +
> +#endif
>
Hi Arend, Jeffrey,
On Tue, Jul 09, 2013 at 03:22:25PM +0200, Arend van Spriel wrote:
> + Samuel
>
> On 07/08/2013 11:52 PM, Jeffrey (Sheng-Hui) Chu wrote:
> > From b4555081b1d27a31c22abede8e0397f1d61fbb04 Mon Sep 17 00:00:00 2001
> >From: Jeffrey Chu <[email protected]>
> >Date: Mon, 8 Jul 2013 17:50:21 -0400
> >Subject: [PATCH] Add bcm2079x-i2c driver for Bcm2079x NFC Controller.
>
> The subject did not show in my mailbox. Not sure if necessary, but I
> tend to send patches to a maintainer and CC the appropriate list(s).
> So the nfc list as well ([email protected]).
Thanks for cc'ing me. Yes, the NFC maintainers emails and the mailing
list are in the MAINTAINERS file, so I expect people to use them to post
their NFC related patches.
> >---
> > drivers/nfc/Kconfig | 1 +
> > drivers/nfc/Makefile | 1 +
> > drivers/nfc/bcm2079x/Kconfig | 10 +
> > drivers/nfc/bcm2079x/Makefile | 4 +
> > drivers/nfc/bcm2079x/bcm2079x-i2c.c | 416 +++++++++++++++++++++++++++++++++++
> > drivers/nfc/bcm2079x/bcm2079x.h | 34 +++
> > 6 files changed, 466 insertions(+)
> > create mode 100644 drivers/nfc/bcm2079x/Kconfig
> > create mode 100644 drivers/nfc/bcm2079x/Makefile
> > create mode 100644 drivers/nfc/bcm2079x/bcm2079x-i2c.c
> > create mode 100644 drivers/nfc/bcm2079x/bcm2079x.h
Jeffrey, I appreciate the upstreaming effort, but I'm not going to take
this patch. It's designed for Android exclusively and not using any of
the NFC kernel APIs.
In particular, we have a full NCI stack that you could use. There
currently is an SPI transport layer, adding an i2c one would be really
easy.
If you're interested and can spend some cycles on this, I can surely
help you with the kernel APIs and how your driver should look like.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/