Add spectral scan feature on HT40 channels for ath9k. This patch extends
previous capability added by Simon Wunderlich
Signed-off-by: Lorenzo Bianconi <[email protected]>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 47 +++++++----
drivers/net/wireless/ath/ath9k/calib.c | 10 +--
drivers/net/wireless/ath/ath9k/calib.h | 3 +-
drivers/net/wireless/ath/ath9k/hw.c | 2 +-
drivers/net/wireless/ath/ath9k/link.c | 3 +-
drivers/net/wireless/ath/ath9k/recv.c | 142 ++++++++++++++++++++++-----------
6 files changed, 139 insertions(+), 68 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 2ee35f6..b44955e 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -875,32 +875,49 @@ static inline u8 spectral_bitmap_weight(u8 *bins)
* TODO: this might need rework when switching to nl80211-based
* interface.
*/
-enum ath_fft_sample_type {
- ATH_FFT_SAMPLE_HT20 = 1,
+enum fft_sample_type {
+ FFT_SAMPLE_HT20 = 1,
+ FFT_SAMPLE_HT20_40,
};
struct fft_sample_tlv {
- u8 type; /* see ath_fft_sample */
+ enum fft_sample_type type;
__be16 length;
/* type dependent data follows */
} __packed;
-struct fft_sample_ht20 {
+struct fft_sample {
struct fft_sample_tlv tlv;
-
- u8 max_exp;
-
__be16 freq;
- s8 rssi;
- s8 noise;
-
- __be16 max_magnitude;
- u8 max_index;
- u8 bitmap_weight;
-
__be64 tsf;
- u8 data[SPECTRAL_HT20_NUM_BINS];
+ union {
+ struct {
+ s8 rssi;
+ s8 nf;
+
+ u8 data[SPECTRAL_HT20_NUM_BINS];
+ __be16 max_mag;
+ u8 max_idx;
+ u8 bitmap_w;
+ u8 max_exp;
+ } ht20;
+ struct {
+ s8 lower_rssi;
+ s8 upper_rssi;
+ s8 lower_nf;
+ s8 upper_nf;
+
+ u8 data[SPECTRAL_HT20_40_NUM_BINS];
+ __be16 lower_max_mag;
+ __be16 upper_max_mag;
+ u8 lower_max_idx;
+ u8 upper_max_idx;
+ u8 lower_bitmap_w;
+ u8 upper_bitmap_w;
+ u8 max_exp;
+ } ht20_40;
+ };
} __packed;
void ath9k_tasklet(unsigned long data);
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 5e8219a..d09eaeb 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -63,13 +63,13 @@ static s16 ath9k_hw_get_default_nf(struct ath_hw *ah,
return ath9k_hw_get_nf_limits(ah, chan)->nominal;
}
-s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan)
+s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan,
+ s16 nf)
{
s8 noise = ATH_DEFAULT_NOISE_FLOOR;
- if (chan && chan->noisefloor) {
- s8 delta = chan->noisefloor -
- ATH9K_NF_CAL_NOISE_THRESH -
+ if (nf) {
+ s8 delta = nf - ATH9K_NF_CAL_NOISE_THRESH -
ath9k_hw_get_default_nf(ah, chan);
if (delta > 0)
noise += delta;
@@ -394,7 +394,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan)
caldata->nfcal_pending = false;
ath9k_hw_update_nfcal_hist_buffer(ah, caldata, nfarray);
chan->noisefloor = h[0].privNF;
- ah->noise = ath9k_hw_getchan_noise(ah, chan);
+ ah->noise = ath9k_hw_getchan_noise(ah, chan, chan->noisefloor);
return true;
}
EXPORT_SYMBOL(ath9k_hw_getnf);
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index 3d70b8c..b8ed95e 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -116,7 +116,8 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
void ath9k_hw_bstuck_nfcal(struct ath_hw *ah);
void ath9k_hw_reset_calibration(struct ath_hw *ah,
struct ath9k_cal_list *currCal);
-s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
+s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan,
+ s16 nf);
#endif /* CALIB_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ecc6ec4..2f1427d 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1882,7 +1882,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
} else if (caldata) {
caldata->paprd_packet_sent = false;
}
- ah->noise = ath9k_hw_getchan_noise(ah, chan);
+ ah->noise = ath9k_hw_getchan_noise(ah, chan, chan->noisefloor);
if (fastcc) {
r = ath9k_hw_do_fastcc(ah, chan);
diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c
index 2f831db..3e747cc 100644
--- a/drivers/net/wireless/ath/ath9k/link.c
+++ b/drivers/net/wireless/ath/ath9k/link.c
@@ -516,7 +516,8 @@ void ath_update_survey_nf(struct ath_softc *sc, int channel)
if (chan->noisefloor) {
survey->filled |= SURVEY_INFO_NOISE_DBM;
- survey->noise = ath9k_hw_getchan_noise(ah, chan);
+ survey->noise = ath9k_hw_getchan_noise(ah, chan,
+ chan->noisefloor);
}
}
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 4ee472a..525f07c 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -972,14 +972,13 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
{
#ifdef CONFIG_ATH9K_DEBUGFS
struct ath_hw *ah = sc->sc_ah;
- u8 bins[SPECTRAL_HT20_NUM_BINS];
- u8 *vdata = (u8 *)hdr;
- struct fft_sample_ht20 fft_sample;
+ u8 type, num_bins, *data, *vdata = (u8 *) hdr;
+ struct fft_sample fft_data;
struct ath_radar_info *radar_info;
- struct ath_ht20_mag_info *mag_info;
int len = rs->rs_datalen;
int dc_pos;
- u16 length, max_magnitude;
+ u16 length, fft_len;
+ enum nl80211_channel_type chtype;
/* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
* via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
@@ -997,45 +996,53 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
return 0;
- /* Variation in the data length is possible and will be fixed later.
- * Note that we only support HT20 for now.
- *
- * TODO: add HT20_40 support as well.
- */
- if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) ||
- (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1))
+ chtype = cfg80211_get_chandef_type(&sc->hw->conf.chandef);
+ if ((chtype == NL80211_CHAN_HT40MINUS) ||
+ (chtype == NL80211_CHAN_HT40PLUS)) {
+ type = FFT_SAMPLE_HT20_40;
+ num_bins = SPECTRAL_HT20_40_NUM_BINS;
+ fft_len = SPECTRAL_HT20_40_TOTAL_DATA_LEN;
+ data = (u8 *) fft_data.ht20_40.data;
+ } else {
+ type = FFT_SAMPLE_HT20;
+ num_bins = SPECTRAL_HT20_NUM_BINS;
+ fft_len = SPECTRAL_HT20_TOTAL_DATA_LEN;
+ data = (u8 *) fft_data.ht20.data;
+ }
+
+ /* variation in the data length is possible and will be fixed later */
+ if ((len > fft_len + 2) || (len < fft_len - 1))
return 1;
- fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20;
- length = sizeof(fft_sample) - sizeof(fft_sample.tlv);
- fft_sample.tlv.length = __cpu_to_be16(length);
+ fft_data.tlv.type = __cpu_to_be32(type);
+ length = sizeof(fft_data) - sizeof(fft_data.tlv);
+ fft_data.tlv.length = __cpu_to_be16(length);
- fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
- fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
- fft_sample.noise = ah->noise;
+ fft_data.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
+ fft_data.tsf = __cpu_to_be64(tsf);
- switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) {
+ switch (len - fft_len) {
case 0:
/* length correct, nothing to do. */
- memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS);
+ memcpy(data, vdata, num_bins);
break;
case -1:
/* first byte missing, duplicate it. */
- memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1);
- bins[0] = vdata[0];
+ memcpy(&data[1], vdata, num_bins - 1);
+ data[0] = vdata[0];
break;
case 2:
/* MAC added 2 extra bytes at bin 30 and 32, remove them. */
- memcpy(bins, vdata, 30);
- bins[30] = vdata[31];
- memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31);
+ memcpy(data, vdata, 30);
+ data[30] = vdata[31];
+ memcpy(&data[31], &vdata[33], num_bins - 31);
break;
case 1:
/* MAC added 2 extra bytes AND first byte is missing. */
- bins[0] = vdata[0];
- memcpy(&bins[0], vdata, 30);
- bins[31] = vdata[31];
- memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32);
+ data[0] = vdata[0];
+ memcpy(&data[1], vdata, 30);
+ data[31] = vdata[31];
+ memcpy(&data[32], &vdata[33], num_bins - 32);
break;
default:
return 1;
@@ -1044,23 +1051,68 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
/* DC value (value in the middle) is the blind spot of the spectral
* sample and invalid, interpolate it.
*/
- dc_pos = SPECTRAL_HT20_NUM_BINS / 2;
- bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
-
- /* mag data is at the end of the frame, in front of radar_info */
- mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
-
- /* copy raw bins without scaling them */
- memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS);
- fft_sample.max_exp = mag_info->max_exp & 0xf;
-
- max_magnitude = spectral_max_magnitude(mag_info->all_bins);
- fft_sample.max_magnitude = __cpu_to_be16(max_magnitude);
- fft_sample.max_index = spectral_max_index(mag_info->all_bins);
- fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins);
- fft_sample.tsf = __cpu_to_be64(tsf);
+ dc_pos = num_bins / 2;
+ data[dc_pos] = (data[dc_pos + 1] + data[dc_pos - 1]) / 2;
+
+ if ((chtype == NL80211_CHAN_HT40MINUS) ||
+ (chtype == NL80211_CHAN_HT40PLUS)) {
+ u16 lower_max_mag, upper_max_mag;
+ s16 nf_ext;
+ struct ath_ht20_40_mag_info *mag_info;
+ struct ath9k_hw_cal_data *caldata = ah->caldata;
+
+ if (caldata)
+ nf_ext = ath9k_hw_getchan_noise(ah, ah->curchan,
+ caldata->nfCalHist[3].privNF);
+ else
+ nf_ext = ATH_DEFAULT_NOISE_FLOOR;
+
+ mag_info = ((struct ath_ht20_40_mag_info *)radar_info) - 1;
+ lower_max_mag = spectral_max_magnitude(mag_info->lower_bins);
+ upper_max_mag = spectral_max_magnitude(mag_info->upper_bins);
+
+ if (chtype == NL80211_CHAN_HT40PLUS) {
+ fft_data.ht20_40.lower_rssi =
+ fix_rssi_inv_only(rs->rs_rssi_ctl0);
+ fft_data.ht20_40.upper_rssi =
+ fix_rssi_inv_only(rs->rs_rssi_ext0);
+ fft_data.ht20_40.lower_nf = ah->noise;
+ fft_data.ht20_40.upper_nf = nf_ext;
+ } else {
+ fft_data.ht20_40.lower_rssi =
+ fix_rssi_inv_only(rs->rs_rssi_ext0);
+ fft_data.ht20_40.upper_rssi =
+ fix_rssi_inv_only(rs->rs_rssi_ctl0);
+ fft_data.ht20_40.lower_nf = nf_ext;
+ fft_data.ht20_40.upper_nf = ah->noise;
+ }
+ fft_data.ht20_40.lower_max_mag = __cpu_to_be16(lower_max_mag);
+ fft_data.ht20_40.lower_max_idx =
+ spectral_max_index(mag_info->lower_bins);
+ fft_data.ht20_40.lower_bitmap_w =
+ spectral_bitmap_weight(mag_info->lower_bins);
+ fft_data.ht20_40.upper_max_mag = __cpu_to_be16(upper_max_mag);
+ fft_data.ht20_40.upper_max_idx =
+ spectral_max_index(mag_info->upper_bins);
+ fft_data.ht20_40.upper_bitmap_w =
+ spectral_bitmap_weight(mag_info->upper_bins);
+ fft_data.ht20_40.max_exp = mag_info->max_exp & 0xf;
+ } else {
+ u16 max_mag;
+ struct ath_ht20_mag_info *mag_info;
+
+ mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
+ max_mag = spectral_max_magnitude(mag_info->all_bins);
+ fft_data.ht20.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
+ fft_data.ht20.nf = ah->noise;
+ fft_data.ht20.max_mag = __cpu_to_be16(max_mag);
+ fft_data.ht20.max_idx = spectral_max_index(mag_info->all_bins);
+ fft_data.ht20.bitmap_w =
+ spectral_bitmap_weight(mag_info->all_bins);
+ fft_data.ht20.max_exp = mag_info->max_exp & 0xf;
+ }
- ath_debug_send_fft_sample(sc, &fft_sample.tlv);
+ ath_debug_send_fft_sample(sc, &fft_data.tlv);
return 1;
#else
return 0;
--
1.8.1.2
On Mon, Sep 30, 2013 at 06:48:40PM +0200, Simon Wunderlich wrote:
> On Thu, Sep 26, 2013 at 04:37:38PM +0200, Lorenzo Bianconi wrote:
>
> One more thing: please don't change the format for HT20 -
> there are already userspace programs which rely on the order
> of the parameters as they are now.
Great, where are these userpace programs?
Luis
On Thu, Sep 26, 2013 at 04:37:38PM +0200, Lorenzo Bianconi wrote:
> Add spectral scan feature on HT40 channels for ath9k. This patch extends
> previous capability added by Simon Wunderlich
>
> Signed-off-by: Lorenzo Bianconi <[email protected]>
> ---
> drivers/net/wireless/ath/ath9k/ath9k.h | 47 +++++++----
> drivers/net/wireless/ath/ath9k/calib.c | 10 +--
> drivers/net/wireless/ath/ath9k/calib.h | 3 +-
> drivers/net/wireless/ath/ath9k/hw.c | 2 +-
> drivers/net/wireless/ath/ath9k/link.c | 3 +-
> drivers/net/wireless/ath/ath9k/recv.c | 142 ++++++++++++++++++++++-----------
> 6 files changed, 139 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
> index 2ee35f6..b44955e 100644
> --- a/drivers/net/wireless/ath/ath9k/ath9k.h
> +++ b/drivers/net/wireless/ath/ath9k/ath9k.h
> @@ -875,32 +875,49 @@ static inline u8 spectral_bitmap_weight(u8 *bins)
> * TODO: this might need rework when switching to nl80211-based
> * interface.
> */
> -enum ath_fft_sample_type {
> - ATH_FFT_SAMPLE_HT20 = 1,
> +enum fft_sample_type {
> + FFT_SAMPLE_HT20 = 1,
> + FFT_SAMPLE_HT20_40,
> };
>
> struct fft_sample_tlv {
> - u8 type; /* see ath_fft_sample */
> + enum fft_sample_type type;
> __be16 length;
> /* type dependent data follows */
> } __packed;
>
> -struct fft_sample_ht20 {
> +struct fft_sample {
> struct fft_sample_tlv tlv;
> -
> - u8 max_exp;
> -
> __be16 freq;
> - s8 rssi;
> - s8 noise;
> -
> - __be16 max_magnitude;
> - u8 max_index;
> - u8 bitmap_weight;
> -
> __be64 tsf;
>
> - u8 data[SPECTRAL_HT20_NUM_BINS];
> + union {
> + struct {
> + s8 rssi;
> + s8 nf;
> +
> + u8 data[SPECTRAL_HT20_NUM_BINS];
> + __be16 max_mag;
> + u8 max_idx;
> + u8 bitmap_w;
> + u8 max_exp;
> + } ht20;
> + struct {
> + s8 lower_rssi;
> + s8 upper_rssi;
> + s8 lower_nf;
> + s8 upper_nf;
> +
> + u8 data[SPECTRAL_HT20_40_NUM_BINS];
> + __be16 lower_max_mag;
> + __be16 upper_max_mag;
> + u8 lower_max_idx;
> + u8 upper_max_idx;
> + u8 lower_bitmap_w;
> + u8 upper_bitmap_w;
> + u8 max_exp;
> + } ht20_40;
> + };
> } __packed;
One more thing: please don't change the format for HT20 - there are already userspace
programs which rely on the order of the parameters as they are now. This is why we have
added the TLVs in the first place - you can just add a new type for HT40 (as you did),
but keep the format of other formats (HT20).
Thanks,
Simon
Simon developed this UI:
https://github.com/simonwunderlich/FFT_eval
I developed a new one using qt-qwt (not compiled statically) in order
to support scan on HT40 channels:
https://github.com/LorenzoBianconi/ath_spectral
It is not finalized yet since I have to review it using Simon's
suggestions for the new format of "fft_sample" data structure.
Cheers,
Lorenzo
2013/9/30 Luis R. Rodriguez <[email protected]>:
> On Mon, Sep 30, 2013 at 06:48:40PM +0200, Simon Wunderlich wrote:
>> On Thu, Sep 26, 2013 at 04:37:38PM +0200, Lorenzo Bianconi wrote:
>>
>> One more thing: please don't change the format for HT20 -
>> there are already userspace programs which rely on the order
>> of the parameters as they are now.
>
> Great, where are these userpace programs?
>
> Luis
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep
Hey Lorenzo,
thanks for your work. Please find a few comments inline:
On Thu, Sep 26, 2013 at 04:37:38PM +0200, Lorenzo Bianconi wrote:
> Add spectral scan feature on HT40 channels for ath9k. This patch extends
> previous capability added by Simon Wunderlich
>
> Signed-off-by: Lorenzo Bianconi <[email protected]>
> ---
> drivers/net/wireless/ath/ath9k/ath9k.h | 47 +++++++----
> drivers/net/wireless/ath/ath9k/calib.c | 10 +--
> drivers/net/wireless/ath/ath9k/calib.h | 3 +-
> drivers/net/wireless/ath/ath9k/hw.c | 2 +-
> drivers/net/wireless/ath/ath9k/link.c | 3 +-
> drivers/net/wireless/ath/ath9k/recv.c | 142 ++++++++++++++++++++++-----------
> 6 files changed, 139 insertions(+), 68 deletions(-)
>
> [...]
> diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
> index 5e8219a..d09eaeb 100644
> --- a/drivers/net/wireless/ath/ath9k/calib.c
> +++ b/drivers/net/wireless/ath/ath9k/calib.c
> @@ -63,13 +63,13 @@ static s16 ath9k_hw_get_default_nf(struct ath_hw *ah,
> return ath9k_hw_get_nf_limits(ah, chan)->nominal;
> }
>
> -s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan)
> +s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan,
> + s16 nf)
> {
> s8 noise = ATH_DEFAULT_NOISE_FLOOR;
>
> - if (chan && chan->noisefloor) {
> - s8 delta = chan->noisefloor -
> - ATH9K_NF_CAL_NOISE_THRESH -
> + if (nf) {
> + s8 delta = nf - ATH9K_NF_CAL_NOISE_THRESH -
> ath9k_hw_get_default_nf(ah, chan);
> if (delta > 0)
> noise += delta;
> @@ -394,7 +394,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan)
> caldata->nfcal_pending = false;
> ath9k_hw_update_nfcal_hist_buffer(ah, caldata, nfarray);
> chan->noisefloor = h[0].privNF;
> - ah->noise = ath9k_hw_getchan_noise(ah, chan);
> + ah->noise = ath9k_hw_getchan_noise(ah, chan, chan->noisefloor);
> return true;
> }
> EXPORT_SYMBOL(ath9k_hw_getnf);
> diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
> index 3d70b8c..b8ed95e 100644
> --- a/drivers/net/wireless/ath/ath9k/calib.h
> +++ b/drivers/net/wireless/ath/ath9k/calib.h
> @@ -116,7 +116,8 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
> void ath9k_hw_bstuck_nfcal(struct ath_hw *ah);
> void ath9k_hw_reset_calibration(struct ath_hw *ah,
> struct ath9k_cal_list *currCal);
> -s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
> +s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan,
> + s16 nf);
I'm not entirely sure how these noise changes are connected to the patch. It appears you
use it later, but maybe it would be good to put this in a separate patch?
> [...]
>
> diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
> index 4ee472a..525f07c 100644
> --- a/drivers/net/wireless/ath/ath9k/recv.c
> +++ b/drivers/net/wireless/ath/ath9k/recv.c
> @@ -972,14 +972,13 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
> {
> #ifdef CONFIG_ATH9K_DEBUGFS
> struct ath_hw *ah = sc->sc_ah;
> - u8 bins[SPECTRAL_HT20_NUM_BINS];
> - u8 *vdata = (u8 *)hdr;
> - struct fft_sample_ht20 fft_sample;
> + u8 type, num_bins, *data, *vdata = (u8 *) hdr;
> + struct fft_sample fft_data;
If you keep the variable name fft_sample, you can save quite a lot renames below. And that
would make it easier for this patch to review.
> struct ath_radar_info *radar_info;
> - struct ath_ht20_mag_info *mag_info;
> int len = rs->rs_datalen;
> int dc_pos;
> - u16 length, max_magnitude;
> + u16 length, fft_len;
> + enum nl80211_channel_type chtype;
>
> /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
> * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
> @@ -997,45 +996,53 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
> if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
> return 0;
>
> - /* Variation in the data length is possible and will be fixed later.
> - * Note that we only support HT20 for now.
> - *
> - * TODO: add HT20_40 support as well.
> - */
> - if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) ||
> - (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1))
> + chtype = cfg80211_get_chandef_type(&sc->hw->conf.chandef);
> + if ((chtype == NL80211_CHAN_HT40MINUS) ||
> + (chtype == NL80211_CHAN_HT40PLUS)) {
> + type = FFT_SAMPLE_HT20_40;
> + num_bins = SPECTRAL_HT20_40_NUM_BINS;
> + fft_len = SPECTRAL_HT20_40_TOTAL_DATA_LEN;
> + data = (u8 *) fft_data.ht20_40.data;
> + } else {
> + type = FFT_SAMPLE_HT20;
> + num_bins = SPECTRAL_HT20_NUM_BINS;
> + fft_len = SPECTRAL_HT20_TOTAL_DATA_LEN;
> + data = (u8 *) fft_data.ht20.data;
> + }
> +
> + /* variation in the data length is possible and will be fixed later */
> + if ((len > fft_len + 2) || (len < fft_len - 1))
> return 1;
>
> - fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20;
> - length = sizeof(fft_sample) - sizeof(fft_sample.tlv);
> - fft_sample.tlv.length = __cpu_to_be16(length);
> + fft_data.tlv.type = __cpu_to_be32(type);
> + length = sizeof(fft_data) - sizeof(fft_data.tlv);
> + fft_data.tlv.length = __cpu_to_be16(length);
>
> - fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
> - fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
> - fft_sample.noise = ah->noise;
> + fft_data.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
> + fft_data.tsf = __cpu_to_be64(tsf);
>
> - switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) {
> + switch (len - fft_len) {
> case 0:
> /* length correct, nothing to do. */
> - memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS);
> + memcpy(data, vdata, num_bins);
> break;
> case -1:
> /* first byte missing, duplicate it. */
> - memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1);
> - bins[0] = vdata[0];
> + memcpy(&data[1], vdata, num_bins - 1);
> + data[0] = vdata[0];
> break;
> case 2:
> /* MAC added 2 extra bytes at bin 30 and 32, remove them. */
> - memcpy(bins, vdata, 30);
> - bins[30] = vdata[31];
> - memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31);
> + memcpy(data, vdata, 30);
> + data[30] = vdata[31];
> + memcpy(&data[31], &vdata[33], num_bins - 31);
> break;
> case 1:
> /* MAC added 2 extra bytes AND first byte is missing. */
> - bins[0] = vdata[0];
> - memcpy(&bins[0], vdata, 30);
> - bins[31] = vdata[31];
> - memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32);
> + data[0] = vdata[0];
> + memcpy(&data[1], vdata, 30);
> + data[31] = vdata[31];
> + memcpy(&data[32], &vdata[33], num_bins - 32);
I hope you tested whether this byte shuffling works as expected for HT40?
> break;
> default:
> return 1;
> @@ -1044,23 +1051,68 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
> /* DC value (value in the middle) is the blind spot of the spectral
> * sample and invalid, interpolate it.
> */
> - dc_pos = SPECTRAL_HT20_NUM_BINS / 2;
> - bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
Same for the DC value here ...
> -
> - /* mag data is at the end of the frame, in front of radar_info */
> - mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
> -
> - /* copy raw bins without scaling them */
> - memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS);
> - fft_sample.max_exp = mag_info->max_exp & 0xf;
> -
> - max_magnitude = spectral_max_magnitude(mag_info->all_bins);
> - fft_sample.max_magnitude = __cpu_to_be16(max_magnitude);
> - fft_sample.max_index = spectral_max_index(mag_info->all_bins);
> - fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins);
> - fft_sample.tsf = __cpu_to_be64(tsf);
> + dc_pos = num_bins / 2;
> + data[dc_pos] = (data[dc_pos + 1] + data[dc_pos - 1]) / 2;
> +
> + if ((chtype == NL80211_CHAN_HT40MINUS) ||
> + (chtype == NL80211_CHAN_HT40PLUS)) {
> + u16 lower_max_mag, upper_max_mag;
> + s16 nf_ext;
> + struct ath_ht20_40_mag_info *mag_info;
> + struct ath9k_hw_cal_data *caldata = ah->caldata;
> +
> + if (caldata)
> + nf_ext = ath9k_hw_getchan_noise(ah, ah->curchan,
> + caldata->nfCalHist[3].privNF);
> + else
> + nf_ext = ATH_DEFAULT_NOISE_FLOOR;
> +
> + mag_info = ((struct ath_ht20_40_mag_info *)radar_info) - 1;
> + lower_max_mag = spectral_max_magnitude(mag_info->lower_bins);
> + upper_max_mag = spectral_max_magnitude(mag_info->upper_bins);
> +
> + if (chtype == NL80211_CHAN_HT40PLUS) {
> + fft_data.ht20_40.lower_rssi =
> + fix_rssi_inv_only(rs->rs_rssi_ctl0);
> + fft_data.ht20_40.upper_rssi =
> + fix_rssi_inv_only(rs->rs_rssi_ext0);
> + fft_data.ht20_40.lower_nf = ah->noise;
> + fft_data.ht20_40.upper_nf = nf_ext;
> + } else {
> + fft_data.ht20_40.lower_rssi =
> + fix_rssi_inv_only(rs->rs_rssi_ext0);
> + fft_data.ht20_40.upper_rssi =
> + fix_rssi_inv_only(rs->rs_rssi_ctl0);
> + fft_data.ht20_40.lower_nf = nf_ext;
> + fft_data.ht20_40.upper_nf = ah->noise;
> + }
> + fft_data.ht20_40.lower_max_mag = __cpu_to_be16(lower_max_mag);
> + fft_data.ht20_40.lower_max_idx =
> + spectral_max_index(mag_info->lower_bins);
> + fft_data.ht20_40.lower_bitmap_w =
> + spectral_bitmap_weight(mag_info->lower_bins);
> + fft_data.ht20_40.upper_max_mag = __cpu_to_be16(upper_max_mag);
> + fft_data.ht20_40.upper_max_idx =
> + spectral_max_index(mag_info->upper_bins);
> + fft_data.ht20_40.upper_bitmap_w =
> + spectral_bitmap_weight(mag_info->upper_bins);
> + fft_data.ht20_40.max_exp = mag_info->max_exp & 0xf;
Could you please try to use some local variables here? I think this could
avoid a few of these ugly multi-line assignments ...
> + } else {
> + u16 max_mag;
> + struct ath_ht20_mag_info *mag_info;
> +
> + mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
> + max_mag = spectral_max_magnitude(mag_info->all_bins);
> + fft_data.ht20.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
> + fft_data.ht20.nf = ah->noise;
> + fft_data.ht20.max_mag = __cpu_to_be16(max_mag);
> + fft_data.ht20.max_idx = spectral_max_index(mag_info->all_bins);
> + fft_data.ht20.bitmap_w =
> + spectral_bitmap_weight(mag_info->all_bins);
> + fft_data.ht20.max_exp = mag_info->max_exp & 0xf;
> + }
>
> - ath_debug_send_fft_sample(sc, &fft_sample.tlv);
> + ath_debug_send_fft_sample(sc, &fft_data.tlv);
> return 1;
> #else
> return 0;
> --
> 1.8.1.2
>
Cheers,
Simon
Thanks Simon for your suggestions. I will review the patch.
Cheers,
Lorenzo
2013/9/30 Simon Wunderlich <[email protected]>:
> Hey Lorenzo,
>
> thanks for your work. Please find a few comments inline:
>
> On Thu, Sep 26, 2013 at 04:37:38PM +0200, Lorenzo Bianconi wrote:
>> Add spectral scan feature on HT40 channels for ath9k. This patch extends
>> previous capability added by Simon Wunderlich
>>
>> Signed-off-by: Lorenzo Bianconi <[email protected]>
>> ---
>> drivers/net/wireless/ath/ath9k/ath9k.h | 47 +++++++----
>> drivers/net/wireless/ath/ath9k/calib.c | 10 +--
>> drivers/net/wireless/ath/ath9k/calib.h | 3 +-
>> drivers/net/wireless/ath/ath9k/hw.c | 2 +-
>> drivers/net/wireless/ath/ath9k/link.c | 3 +-
>> drivers/net/wireless/ath/ath9k/recv.c | 142 ++++++++++++++++++++++-----------
>> 6 files changed, 139 insertions(+), 68 deletions(-)
>>
>> [...]
>> diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
>> index 5e8219a..d09eaeb 100644
>> --- a/drivers/net/wireless/ath/ath9k/calib.c
>> +++ b/drivers/net/wireless/ath/ath9k/calib.c
>> @@ -63,13 +63,13 @@ static s16 ath9k_hw_get_default_nf(struct ath_hw *ah,
>> return ath9k_hw_get_nf_limits(ah, chan)->nominal;
>> }
>>
>> -s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan)
>> +s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan,
>> + s16 nf)
>> {
>> s8 noise = ATH_DEFAULT_NOISE_FLOOR;
>>
>> - if (chan && chan->noisefloor) {
>> - s8 delta = chan->noisefloor -
>> - ATH9K_NF_CAL_NOISE_THRESH -
>> + if (nf) {
>> + s8 delta = nf - ATH9K_NF_CAL_NOISE_THRESH -
>> ath9k_hw_get_default_nf(ah, chan);
>> if (delta > 0)
>> noise += delta;
>> @@ -394,7 +394,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan)
>> caldata->nfcal_pending = false;
>> ath9k_hw_update_nfcal_hist_buffer(ah, caldata, nfarray);
>> chan->noisefloor = h[0].privNF;
>> - ah->noise = ath9k_hw_getchan_noise(ah, chan);
>> + ah->noise = ath9k_hw_getchan_noise(ah, chan, chan->noisefloor);
>> return true;
>> }
>> EXPORT_SYMBOL(ath9k_hw_getnf);
>> diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
>> index 3d70b8c..b8ed95e 100644
>> --- a/drivers/net/wireless/ath/ath9k/calib.h
>> +++ b/drivers/net/wireless/ath/ath9k/calib.h
>> @@ -116,7 +116,8 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
>> void ath9k_hw_bstuck_nfcal(struct ath_hw *ah);
>> void ath9k_hw_reset_calibration(struct ath_hw *ah,
>> struct ath9k_cal_list *currCal);
>> -s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
>> +s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan,
>> + s16 nf);
>
> I'm not entirely sure how these noise changes are connected to the patch. It appears you
> use it later, but maybe it would be good to put this in a separate patch?
>> [...]
>>
>> diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
>> index 4ee472a..525f07c 100644
>> --- a/drivers/net/wireless/ath/ath9k/recv.c
>> +++ b/drivers/net/wireless/ath/ath9k/recv.c
>> @@ -972,14 +972,13 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
>> {
>> #ifdef CONFIG_ATH9K_DEBUGFS
>> struct ath_hw *ah = sc->sc_ah;
>> - u8 bins[SPECTRAL_HT20_NUM_BINS];
>> - u8 *vdata = (u8 *)hdr;
>> - struct fft_sample_ht20 fft_sample;
>> + u8 type, num_bins, *data, *vdata = (u8 *) hdr;
>> + struct fft_sample fft_data;
>
> If you keep the variable name fft_sample, you can save quite a lot renames below. And that
> would make it easier for this patch to review.
>
>> struct ath_radar_info *radar_info;
>> - struct ath_ht20_mag_info *mag_info;
>> int len = rs->rs_datalen;
>> int dc_pos;
>> - u16 length, max_magnitude;
>> + u16 length, fft_len;
>> + enum nl80211_channel_type chtype;
>>
>> /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
>> * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
>> @@ -997,45 +996,53 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
>> if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
>> return 0;
>>
>> - /* Variation in the data length is possible and will be fixed later.
>> - * Note that we only support HT20 for now.
>> - *
>> - * TODO: add HT20_40 support as well.
>> - */
>> - if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) ||
>> - (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1))
>> + chtype = cfg80211_get_chandef_type(&sc->hw->conf.chandef);
>> + if ((chtype == NL80211_CHAN_HT40MINUS) ||
>> + (chtype == NL80211_CHAN_HT40PLUS)) {
>> + type = FFT_SAMPLE_HT20_40;
>> + num_bins = SPECTRAL_HT20_40_NUM_BINS;
>> + fft_len = SPECTRAL_HT20_40_TOTAL_DATA_LEN;
>> + data = (u8 *) fft_data.ht20_40.data;
>> + } else {
>> + type = FFT_SAMPLE_HT20;
>> + num_bins = SPECTRAL_HT20_NUM_BINS;
>> + fft_len = SPECTRAL_HT20_TOTAL_DATA_LEN;
>> + data = (u8 *) fft_data.ht20.data;
>> + }
>> +
>> + /* variation in the data length is possible and will be fixed later */
>> + if ((len > fft_len + 2) || (len < fft_len - 1))
>> return 1;
>>
>> - fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20;
>> - length = sizeof(fft_sample) - sizeof(fft_sample.tlv);
>> - fft_sample.tlv.length = __cpu_to_be16(length);
>> + fft_data.tlv.type = __cpu_to_be32(type);
>> + length = sizeof(fft_data) - sizeof(fft_data.tlv);
>> + fft_data.tlv.length = __cpu_to_be16(length);
>>
>> - fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
>> - fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
>> - fft_sample.noise = ah->noise;
>> + fft_data.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
>> + fft_data.tsf = __cpu_to_be64(tsf);
>>
>> - switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) {
>> + switch (len - fft_len) {
>> case 0:
>> /* length correct, nothing to do. */
>> - memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS);
>> + memcpy(data, vdata, num_bins);
>> break;
>> case -1:
>> /* first byte missing, duplicate it. */
>> - memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1);
>> - bins[0] = vdata[0];
>> + memcpy(&data[1], vdata, num_bins - 1);
>> + data[0] = vdata[0];
>> break;
>> case 2:
>> /* MAC added 2 extra bytes at bin 30 and 32, remove them. */
>> - memcpy(bins, vdata, 30);
>> - bins[30] = vdata[31];
>> - memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31);
>> + memcpy(data, vdata, 30);
>> + data[30] = vdata[31];
>> + memcpy(&data[31], &vdata[33], num_bins - 31);
>> break;
>> case 1:
>> /* MAC added 2 extra bytes AND first byte is missing. */
>> - bins[0] = vdata[0];
>> - memcpy(&bins[0], vdata, 30);
>> - bins[31] = vdata[31];
>> - memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32);
>> + data[0] = vdata[0];
>> + memcpy(&data[1], vdata, 30);
>> + data[31] = vdata[31];
>> + memcpy(&data[32], &vdata[33], num_bins - 32);
>
> I hope you tested whether this byte shuffling works as expected for HT40?
>
>> break;
>> default:
>> return 1;
>> @@ -1044,23 +1051,68 @@ static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
>> /* DC value (value in the middle) is the blind spot of the spectral
>> * sample and invalid, interpolate it.
>> */
>> - dc_pos = SPECTRAL_HT20_NUM_BINS / 2;
>> - bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
>
> Same for the DC value here ...
>
>> -
>> - /* mag data is at the end of the frame, in front of radar_info */
>> - mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
>> -
>> - /* copy raw bins without scaling them */
>> - memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS);
>> - fft_sample.max_exp = mag_info->max_exp & 0xf;
>> -
>> - max_magnitude = spectral_max_magnitude(mag_info->all_bins);
>> - fft_sample.max_magnitude = __cpu_to_be16(max_magnitude);
>> - fft_sample.max_index = spectral_max_index(mag_info->all_bins);
>> - fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins);
>> - fft_sample.tsf = __cpu_to_be64(tsf);
>> + dc_pos = num_bins / 2;
>> + data[dc_pos] = (data[dc_pos + 1] + data[dc_pos - 1]) / 2;
>> +
>> + if ((chtype == NL80211_CHAN_HT40MINUS) ||
>> + (chtype == NL80211_CHAN_HT40PLUS)) {
>> + u16 lower_max_mag, upper_max_mag;
>> + s16 nf_ext;
>> + struct ath_ht20_40_mag_info *mag_info;
>> + struct ath9k_hw_cal_data *caldata = ah->caldata;
>> +
>> + if (caldata)
>> + nf_ext = ath9k_hw_getchan_noise(ah, ah->curchan,
>> + caldata->nfCalHist[3].privNF);
>> + else
>> + nf_ext = ATH_DEFAULT_NOISE_FLOOR;
>> +
>> + mag_info = ((struct ath_ht20_40_mag_info *)radar_info) - 1;
>> + lower_max_mag = spectral_max_magnitude(mag_info->lower_bins);
>> + upper_max_mag = spectral_max_magnitude(mag_info->upper_bins);
>> +
>> + if (chtype == NL80211_CHAN_HT40PLUS) {
>> + fft_data.ht20_40.lower_rssi =
>> + fix_rssi_inv_only(rs->rs_rssi_ctl0);
>> + fft_data.ht20_40.upper_rssi =
>> + fix_rssi_inv_only(rs->rs_rssi_ext0);
>> + fft_data.ht20_40.lower_nf = ah->noise;
>> + fft_data.ht20_40.upper_nf = nf_ext;
>> + } else {
>> + fft_data.ht20_40.lower_rssi =
>> + fix_rssi_inv_only(rs->rs_rssi_ext0);
>> + fft_data.ht20_40.upper_rssi =
>> + fix_rssi_inv_only(rs->rs_rssi_ctl0);
>> + fft_data.ht20_40.lower_nf = nf_ext;
>> + fft_data.ht20_40.upper_nf = ah->noise;
>> + }
>> + fft_data.ht20_40.lower_max_mag = __cpu_to_be16(lower_max_mag);
>> + fft_data.ht20_40.lower_max_idx =
>> + spectral_max_index(mag_info->lower_bins);
>> + fft_data.ht20_40.lower_bitmap_w =
>> + spectral_bitmap_weight(mag_info->lower_bins);
>> + fft_data.ht20_40.upper_max_mag = __cpu_to_be16(upper_max_mag);
>> + fft_data.ht20_40.upper_max_idx =
>> + spectral_max_index(mag_info->upper_bins);
>> + fft_data.ht20_40.upper_bitmap_w =
>> + spectral_bitmap_weight(mag_info->upper_bins);
>> + fft_data.ht20_40.max_exp = mag_info->max_exp & 0xf;
>
>
> Could you please try to use some local variables here? I think this could
> avoid a few of these ugly multi-line assignments ...
>
>> + } else {
>> + u16 max_mag;
>> + struct ath_ht20_mag_info *mag_info;
>> +
>> + mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
>> + max_mag = spectral_max_magnitude(mag_info->all_bins);
>> + fft_data.ht20.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
>> + fft_data.ht20.nf = ah->noise;
>> + fft_data.ht20.max_mag = __cpu_to_be16(max_mag);
>> + fft_data.ht20.max_idx = spectral_max_index(mag_info->all_bins);
>> + fft_data.ht20.bitmap_w =
>> + spectral_bitmap_weight(mag_info->all_bins);
>> + fft_data.ht20.max_exp = mag_info->max_exp & 0xf;
>> + }
>>
>> - ath_debug_send_fft_sample(sc, &fft_sample.tlv);
>> + ath_debug_send_fft_sample(sc, &fft_data.tlv);
>> return 1;
>> #else
>> return 0;
>> --
>> 1.8.1.2
>>
>
> Cheers,
> Simon
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep
On Mon, Sep 30, 2013 at 2:25 PM, Lorenzo Bianconi
<[email protected]> wrote:
> Simon developed this UI:
> https://github.com/simonwunderlich/FFT_eval
> I developed a new one using qt-qwt (not compiled statically) in order
> to support scan on HT40 channels:
> https://github.com/LorenzoBianconi/ath_spectral
> It is not finalized yet since I have to review it using Simon's
> suggestions for the new format of "fft_sample" data structure.
OK great! Then agreed with you. Can you please document spectral scan
progress somewhere here:
http://wireless.kernel.org/en/users/Drivers/ath9k
Maybe a new section? Pointers to the applications would be great too!
Luis
Ok, I will review the patch first and then I will upgrade the UI and
documentation
Regards,
Lorenzo
2013/9/30 Luis R. Rodriguez <[email protected]>:
> On Mon, Sep 30, 2013 at 2:25 PM, Lorenzo Bianconi
> <[email protected]> wrote:
>> Simon developed this UI:
>> https://github.com/simonwunderlich/FFT_eval
>> I developed a new one using qt-qwt (not compiled statically) in order
>> to support scan on HT40 channels:
>> https://github.com/LorenzoBianconi/ath_spectral
>> It is not finalized yet since I have to review it using Simon's
>> suggestions for the new format of "fft_sample" data structure.
>
> OK great! Then agreed with you. Can you please document spectral scan
> progress somewhere here:
>
> http://wireless.kernel.org/en/users/Drivers/ath9k
>
> Maybe a new section? Pointers to the applications would be great too!
>
> Luis
--
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep