The driver attempts to alter memory that is mapped to PCI device.
This is because tx_fwinfo_8190pci points to skb->data
Move the pci_map_single to when completed buffer is ready to be mapped with
psdec is empty to drop on mapping error.
Signed-off-by: Malcolm Priestley <[email protected]>
Cc: <[email protected]>
---
v2 - Fix typo in subject header.
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
index 4723a0bd5067..a23628f390c9 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
@@ -1182,8 +1182,7 @@ void rtl92e_fill_tx_desc(struct net_device *dev, struct tx_desc *pdesc,
struct cb_desc *cb_desc, struct sk_buff *skb)
{
struct r8192_priv *priv = rtllib_priv(dev);
- dma_addr_t mapping = pci_map_single(priv->pdev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
+ dma_addr_t mapping;
struct tx_fwinfo_8190pci *pTxFwInfo;
pTxFwInfo = (struct tx_fwinfo_8190pci *)skb->data;
@@ -1194,8 +1193,6 @@ void rtl92e_fill_tx_desc(struct net_device *dev, struct tx_desc *pdesc,
pTxFwInfo->Short = _rtl92e_query_is_short(pTxFwInfo->TxHT,
pTxFwInfo->TxRate, cb_desc);
- if (pci_dma_mapping_error(priv->pdev, mapping))
- netdev_err(dev, "%s(): DMA Mapping error\n", __func__);
if (cb_desc->bAMPDUEnable) {
pTxFwInfo->AllowAggregation = 1;
pTxFwInfo->RxMF = cb_desc->ampdu_factor;
@@ -1230,6 +1227,14 @@ void rtl92e_fill_tx_desc(struct net_device *dev, struct tx_desc *pdesc,
}
memset((u8 *)pdesc, 0, 12);
+
+ mapping = pci_map_single(priv->pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ netdev_err(dev, "%s(): DMA Mapping error\n", __func__);
+ return;
+ }
+
pdesc->LINIP = 0;
pdesc->CmdInit = 1;
pdesc->Offset = sizeof(struct tx_fwinfo_8190pci) + 8;
--
2.11.0
TID 7 is a valid value for QoS IEEE 802.11e.
The switch statement that follows states 7 is valid.
Remove function IsACValid and use the default case to filter
invalid TIDs.
Signed-off-by: Malcolm Priestley <[email protected]>
Cc: <[email protected]>
---
drivers/staging/rtl8192e/rtl819x_TSProc.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl819x_TSProc.c b/drivers/staging/rtl8192e/rtl819x_TSProc.c
index 48bbd9e8a52f..dcc4eb691889 100644
--- a/drivers/staging/rtl8192e/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192e/rtl819x_TSProc.c
@@ -306,11 +306,6 @@ static void MakeTSEntry(struct ts_common_info *pTsCommonInfo, u8 *Addr,
pTsCommonInfo->TClasNum = TCLAS_Num;
}
-static bool IsACValid(unsigned int tid)
-{
- return tid < 7;
-}
-
bool GetTs(struct rtllib_device *ieee, struct ts_common_info **ppTS,
u8 *Addr, u8 TID, enum tr_select TxRxSelect, bool bAddNewTs)
{
@@ -328,12 +323,6 @@ bool GetTs(struct rtllib_device *ieee, struct ts_common_info **ppTS,
if (ieee->current_network.qos_data.supported == 0) {
UP = 0;
} else {
- if (!IsACValid(TID)) {
- netdev_warn(ieee->dev, "%s(): TID(%d) is not valid\n",
- __func__, TID);
- return false;
- }
-
switch (TID) {
case 0:
case 3:
@@ -351,6 +340,10 @@ bool GetTs(struct rtllib_device *ieee, struct ts_common_info **ppTS,
case 7:
UP = 7;
break;
+ default:
+ netdev_warn(ieee->dev, "%s(): TID(%d) is not valid\n",
+ __func__, TID);
+ return false;
}
}
--
2.11.0
EPROM_CMD is 2 byte aligned on PCI map so calling with rtl92e_readl
will return invalid data so use rtl92e_readw.
The device is unable to select the right eeprom type.
Signed-off-by: Malcolm Priestley <[email protected]>
Cc: <[email protected]>
---
v2 - Fix typo in subject line
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
index e03d0a3a6dcc..1c6ed5b2a6f9 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
@@ -625,7 +625,7 @@ void rtl92e_get_eeprom_size(struct net_device *dev)
struct r8192_priv *priv = rtllib_priv(dev);
RT_TRACE(COMP_INIT, "===========>%s()\n", __func__);
- curCR = rtl92e_readl(dev, EPROM_CMD);
+ curCR = rtl92e_readw(dev, EPROM_CMD);
RT_TRACE(COMP_INIT, "read from Reg Cmd9346CR(%x):%x\n", EPROM_CMD,
curCR);
priv->epromtype = (curCR & EPROM_CMD_9356SEL) ? EEPROM_93C56 :
--
2.11.0
BSSIDR has two byte alignment on PCI ioremap correct the write
by swapping to 16 bits first.
This fixes a problem that the device associates fail because
the filter is not set correctly.
Signed-off-by: Malcolm Priestley <[email protected]>
Cc: <[email protected]>
---
v2 - Fix name of register in commit message.
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
index a23628f390c9..e03d0a3a6dcc 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
@@ -97,8 +97,9 @@ void rtl92e_set_reg(struct net_device *dev, u8 variable, u8 *val)
switch (variable) {
case HW_VAR_BSSID:
- rtl92e_writel(dev, BSSIDR, ((u32 *)(val))[0]);
- rtl92e_writew(dev, BSSIDR+2, ((u16 *)(val+2))[0]);
+ /* BSSIDR 2 byte alignment */
+ rtl92e_writew(dev, BSSIDR, *(u16 *)val);
+ rtl92e_writel(dev, BSSIDR + 2, *(u32 *)(val + 2));
break;
case HW_VAR_MEDIA_STATUS:
@@ -961,8 +962,8 @@ static void _rtl92e_net_update(struct net_device *dev)
rtl92e_config_rate(dev, &rate_config);
priv->dot11CurrentPreambleMode = PREAMBLE_AUTO;
priv->basic_rate = rate_config &= 0x15f;
- rtl92e_writel(dev, BSSIDR, ((u32 *)net->bssid)[0]);
- rtl92e_writew(dev, BSSIDR+4, ((u16 *)net->bssid)[2]);
+ rtl92e_writew(dev, BSSIDR, *(u16 *)net->bssid);
+ rtl92e_writel(dev, BSSIDR + 2, *(u32 *)(net->bssid + 2));
if (priv->rtllib->iw_mode == IW_MODE_ADHOC) {
rtl92e_writew(dev, ATIMWND, 2);
--
2.11.0