From: Eyal Ilsar <[email protected]>
If the value for the firmware configuration parameters
BTC_STATIC_LEN_LE_BT and BTC_STATIC_LEN_LE_WLAN are not set the duty
cycle between BT and WLAN is such that if BT (including BLE) is active
WLAN gets 0 bandwidth. When tuning these parameters having a too high
value for WLAN means that BLE performance degrades.
The "sweet" point of roughly half of the maximal values was empirically
found to achieve a balance between BLE and Wi-Fi coexistence
performance.
Signed-off-by: Eyal Ilsar <[email protected]>
Signed-off-by: Ramon Fried <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/smd.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 9c6590d5348a..1c7598752255 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -72,8 +72,10 @@ static struct wcn36xx_cfg_val wcn36xx_cfg_vals[] = {
WCN36XX_CFG_VAL(DYNAMIC_PS_POLL_VALUE, 0),
WCN36XX_CFG_VAL(TX_PWR_CTRL_ENABLE, 1),
WCN36XX_CFG_VAL(ENABLE_CLOSE_LOOP, 1),
- WCN36XX_CFG_VAL(ENABLE_LPWR_IMG_TRANSITION, 0),
+ WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_BT, 120000),
+ WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_WLAN, 30000),
WCN36XX_CFG_VAL(MAX_ASSOC_LIMIT, 10),
+ WCN36XX_CFG_VAL(ENABLE_LPWR_IMG_TRANSITION, 0),
WCN36XX_CFG_VAL(ENABLE_MCC_ADAPTIVE_SCHEDULER, 0),
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
On Mon 13 Nov 23:23 PST 2017, Ramon Fried wrote:
> From: Eyal Ilsar <[email protected]>
>
> If the value for the firmware configuration parameters
> BTC_STATIC_LEN_LE_BT and BTC_STATIC_LEN_LE_WLAN are not set the duty
> cycle between BT and WLAN is such that if BT (including BLE) is active
> WLAN gets 0 bandwidth. When tuning these parameters having a too high
> value for WLAN means that BLE performance degrades.
> The "sweet" point of roughly half of the maximal values was empirically
> found to achieve a balance between BLE and Wi-Fi coexistence
> performance.
>
> Signed-off-by: Eyal Ilsar <[email protected]>
> Signed-off-by: Ramon Fried <[email protected]>
> ---
> drivers/net/wireless/ath/wcn36xx/smd.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
> index 9c6590d5348a..1c7598752255 100644
> --- a/drivers/net/wireless/ath/wcn36xx/smd.c
> +++ b/drivers/net/wireless/ath/wcn36xx/smd.c
> @@ -72,8 +72,10 @@ static struct wcn36xx_cfg_val wcn36xx_cfg_vals[] = {
> WCN36XX_CFG_VAL(DYNAMIC_PS_POLL_VALUE, 0),
> WCN36XX_CFG_VAL(TX_PWR_CTRL_ENABLE, 1),
> WCN36XX_CFG_VAL(ENABLE_CLOSE_LOOP, 1),
> - WCN36XX_CFG_VAL(ENABLE_LPWR_IMG_TRANSITION, 0),
I still don't see why you're moving this unrelated line, can you please
help me see what I'm missing?
Thanks,
Bjorn
> + WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_BT, 120000),
> + WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_WLAN, 30000),
> WCN36XX_CFG_VAL(MAX_ASSOC_LIMIT, 10),
> + WCN36XX_CFG_VAL(ENABLE_LPWR_IMG_TRANSITION, 0),
> WCN36XX_CFG_VAL(ENABLE_MCC_ADAPTIVE_SCHEDULER, 0),
> };
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>