2018-03-26 05:39:15

by Govind Singh

Subject: [PATCH 02/12] dt: bindings: add bindings for ath10k qmi client

Add device tree binding documentation details for ath10k
qmi client for SDM845/APQ8098 SoC into "qcom,ath10k.txt".

Signed-off-by: Govind Singh <[email protected]>
---
Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 34e4f98..8076ae3 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -5,6 +5,7 @@ Required properties:
* "qcom,ath10k"
* "qcom,ipq4019-wifi"
* "qcom,wcn3990-wifi"
+ * "qcom,ath10k-qmi"

PCI based devices uses compatible string "qcom,ath10k" and takes calibration
data along with board specific data via "qcom,ath10k-calibration-data".
@@ -21,6 +22,8 @@ can be provided per device.

SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".

+- qcom,wlan-msa-memory: MSA memory size
+
Optional properties:
- reg: Address and length of the register set for the device.
- reg-names: Must include the list of following reg names,
@@ -150,3 +153,8 @@ qcom,wifi@18000000 {
<0 141 0 /* CE11 */ >;
vdd-0.8-cx-mx-supply = <&pm8998_l5>;
};
+
+qcom,ath10k-qmi {
+ compatible = "qcom,ath10k-qmi";
+ qcom,wlan-msa-memory = <0x100000>;
+};
--
1.9.1

2018-05-11 17:09:40

by Bjorn Andersson

Subject: Re: [PATCH 02/12] dt: bindings: add bindings for ath10k qmi client

On Sun 25 Mar 22:39 PDT 2018, Govind Singh wrote:

> Add device tree binding documentation details for ath10k
> qmi client for SDM845/APQ8098 SoC into "qcom,ath10k.txt".
>
> Signed-off-by: Govind Singh <[email protected]>
> ---
> Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> index 34e4f98..8076ae3 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> @@ -5,6 +5,7 @@ Required properties:
> * "qcom,ath10k"
> * "qcom,ipq4019-wifi"
> * "qcom,wcn3990-wifi"
> + * "qcom,ath10k-qmi"
>
> PCI based devices uses compatible string "qcom,ath10k" and takes calibration
> data along with board specific data via "qcom,ath10k-calibration-data".
> @@ -21,6 +22,8 @@ can be provided per device.
>
> SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
>
> +- qcom,wlan-msa-memory: MSA memory size
> +
> Optional properties:
> - reg: Address and length of the register set for the device.
> - reg-names: Must include the list of following reg names,
> @@ -150,3 +153,8 @@ qcom,wifi@18000000 {
> <0 141 0 /* CE11 */ >;
> vdd-0.8-cx-mx-supply = <&pm8998_l5>;
> };
> +
> +qcom,ath10k-qmi {
> + compatible = "qcom,ath10k-qmi";
> + qcom,wlan-msa-memory = <0x100000>;

Is this a complete example for what's needed to get working WiFi?
> +};

Regards,
Bjorn