From: Sebastian Gottschall <[email protected]>
Signed-off-by: Sebastian Gottschall <[email protected]>
v2: fix trailing whitespace issue and fix some typos within the commit note
---
drivers/net/wireless/ath/ath10k/mac.c | 7 -------
drivers/net/wireless/ath/ath10k/wmi.c | 11 ++++++++---
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 95243b48a179..46885b915eb7 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4442,13 +4442,6 @@ static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
vht_cap.cap |= val;
}
- /* Currently the firmware seems to be buggy, don't enable 80+80
- * mode until that's resolved.
- */
- if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) &&
- (ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == 0)
- vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
-
mcs_map = 0;
for (i = 0; i < 8; i++) {
if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i)))
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 877249ac6fd4..e2adf34effb3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1677,13 +1677,18 @@ void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
flags |= WMI_CHAN_FLAG_HT40_PLUS;
if (arg->chan_radar)
flags |= WMI_CHAN_FLAG_DFS;
-
+ ch->band_center_freq2 = 0;
ch->mhz = __cpu_to_le32(arg->freq);
ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1);
if (arg->mode == MODE_11AC_VHT80_80)
ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq2);
- else
- ch->band_center_freq2 = 0;
+ if (arg->mode == MODE_11AC_VHT160) {
+ if (arg->freq < arg->band_center_freq1)
+ ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1 - 40);
+ else
+ ch->band_center_freq1 = __cpu_to_le32(arg->band_center_freq1 + 40);
+ ch->band_center_freq2 = __cpu_to_le32(arg->band_center_freq1);
+ }
ch->min_power = arg->min_power;
ch->max_power = arg->max_power;
ch->reg_power = arg->max_reg_power;
--
2.17.1