2019-02-11 08:16:21

by Stanislaw Gruszka

[permalink] [raw]
Subject: [PATCH] mt76x02u: use usb_bulk_msg to upload firmware

We don't need to send firmware data asynchronously, much simpler is just
use synchronous usb_bulk_msg().

Signed-off-by: Stanislaw Gruszka <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 13 +++++
.../wireless/mediatek/mt76/mt76x02_usb_mcu.c | 52 ++++++-------------
drivers/net/wireless/mediatek/mt76/usb.c | 1 -
3 files changed, 29 insertions(+), 37 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 2e5bcb3fdff7..94e0f1379e68 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -664,6 +664,19 @@ static inline bool mt76u_check_sg(struct mt76_dev *dev)
udev->speed == USB_SPEED_WIRELESS));
}

+static inline int
+mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int timeout)
+{
+ struct usb_interface *intf = to_usb_interface(dev->dev);
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct mt76_usb *usb = &dev->usb;
+ unsigned int pipe;
+ int sent;
+
+ pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
+ return usb_bulk_msg(udev, pipe, data, len, &sent, timeout);
+}
+
int mt76u_vendor_request(struct mt76_dev *dev, u8 req,
u8 req_type, u16 val, u16 offset,
void *buf, size_t len);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
index da299b8a1334..642df4287082 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
@@ -121,11 +121,8 @@ static int
__mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
int cmd, bool wait_resp)
{
- struct usb_interface *intf = to_usb_interface(dev->dev);
- struct usb_device *udev = interface_to_usbdev(intf);
struct mt76_usb *usb = &dev->usb;
- unsigned int pipe;
- int ret, sent;
+ int ret;
u8 seq = 0;
u32 info;

@@ -135,7 +132,6 @@ __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
if (test_bit(MT76_REMOVED, &dev->state))
return 0;

- pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
if (wait_resp) {
seq = ++usb->mcu.msg_seq & 0xf;
if (!seq)
@@ -149,7 +145,7 @@ __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
if (ret)
return ret;

- ret = usb_bulk_msg(udev, pipe, skb->data, skb->len, &sent, 500);
+ ret = mt76u_bulk_msg(dev, skb->data, skb->len, 500);
if (ret)
return ret;

@@ -263,14 +259,12 @@ void mt76x02u_mcu_fw_reset(struct mt76x02_dev *dev)
EXPORT_SYMBOL_GPL(mt76x02u_mcu_fw_reset);

static int
-__mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, struct mt76u_buf *buf,
+__mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, u8 *data,
const void *fw_data, int len, u32 dst_addr)
{
- u8 *data = sg_virt(&buf->urb->sg[0]);
- DECLARE_COMPLETION_ONSTACK(cmpl);
__le32 info;
u32 val;
- int err;
+ int err, data_len;

info = cpu_to_le32(FIELD_PREP(MT_MCU_MSG_PORT, CPU_TX_PORT) |
FIELD_PREP(MT_MCU_MSG_LEN, len) |
@@ -286,25 +280,12 @@ __mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, struct mt76u_buf *buf,
mt76u_single_wr(&dev->mt76, MT_VEND_WRITE_FCE,
MT_FCE_DMA_LEN, len << 16);

- buf->len = MT_CMD_HDR_LEN + len + sizeof(info);
- err = mt76u_submit_buf(&dev->mt76, USB_DIR_OUT,
- MT_EP_OUT_INBAND_CMD,
- buf, GFP_KERNEL,
- mt76u_mcu_complete_urb, &cmpl);
- if (err < 0)
- return err;
-
- if (!wait_for_completion_timeout(&cmpl,
- msecs_to_jiffies(1000))) {
- dev_err(dev->mt76.dev, "firmware upload timed out\n");
- usb_kill_urb(buf->urb);
- return -ETIMEDOUT;
- }
+ data_len = MT_CMD_HDR_LEN + len + sizeof(info);

- if (mt76u_urb_error(buf->urb)) {
- dev_err(dev->mt76.dev, "firmware upload failed: %d\n",
- buf->urb->status);
- return buf->urb->status;
+ err = mt76u_bulk_msg(&dev->mt76, data, data_len, 1000);
+ if (err) {
+ dev_err(dev->mt76.dev, "firmware upload failed: %d\n", err);
+ return err;
}

val = mt76_rr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX);
@@ -317,17 +298,16 @@ __mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, struct mt76u_buf *buf,
int mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, const void *data,
int data_len, u32 max_payload, u32 offset)
{
- int err, len, pos = 0, max_len = max_payload - 8;
- struct mt76u_buf buf;
+ int len, err = 0, pos = 0, max_len = max_payload - 8;
+ u8 *buf;

- err = mt76u_buf_alloc(&dev->mt76, &buf, 1, max_payload, max_payload,
- GFP_KERNEL);
- if (err < 0)
- return err;
+ buf = kmalloc(max_payload, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;

while (data_len > 0) {
len = min_t(int, data_len, max_len);
- err = __mt76x02u_mcu_fw_send_data(dev, &buf, data + pos,
+ err = __mt76x02u_mcu_fw_send_data(dev, buf, data + pos,
len, offset + pos);
if (err < 0)
break;
@@ -336,7 +316,7 @@ int mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, const void *data,
pos += len;
usleep_range(5000, 10000);
}
- mt76u_buf_free(&buf);
+ kfree(buf);

return err;
}
diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
index 5f0faf07c346..358a95a2bbcb 100644
--- a/drivers/net/wireless/mediatek/mt76/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/usb.c
@@ -328,7 +328,6 @@ int mt76u_buf_alloc(struct mt76_dev *dev, struct mt76u_buf *buf,

return mt76u_fill_rx_sg(dev, buf, nsgs, len, sglen);
}
-EXPORT_SYMBOL_GPL(mt76u_buf_alloc);

void mt76u_buf_free(struct mt76u_buf *buf)
{
--
2.19.2



2019-02-11 09:51:22

by Lorenzo Bianconi

[permalink] [raw]
Subject: Re: [PATCH] mt76x02u: use usb_bulk_msg to upload firmware

> We don't need to send firmware data asynchronously, much simpler is just
> use synchronous usb_bulk_msg().
>
> Signed-off-by: Stanislaw Gruszka <[email protected]>

Tested-by: Lorenzo Bianconi <[email protected]>
> ---
> drivers/net/wireless/mediatek/mt76/mt76.h | 13 +++++
> .../wireless/mediatek/mt76/mt76x02_usb_mcu.c | 52 ++++++-------------
> drivers/net/wireless/mediatek/mt76/usb.c | 1 -
> 3 files changed, 29 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
> index 2e5bcb3fdff7..94e0f1379e68 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> @@ -664,6 +664,19 @@ static inline bool mt76u_check_sg(struct mt76_dev *dev)
> udev->speed == USB_SPEED_WIRELESS));
> }
>
> +static inline int
> +mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int timeout)
> +{
> + struct usb_interface *intf = to_usb_interface(dev->dev);
> + struct usb_device *udev = interface_to_usbdev(intf);
> + struct mt76_usb *usb = &dev->usb;
> + unsigned int pipe;
> + int sent;
> +
> + pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
> + return usb_bulk_msg(udev, pipe, data, len, &sent, timeout);
> +}
> +
> int mt76u_vendor_request(struct mt76_dev *dev, u8 req,
> u8 req_type, u16 val, u16 offset,
> void *buf, size_t len);
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> index da299b8a1334..642df4287082 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> @@ -121,11 +121,8 @@ static int
> __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
> int cmd, bool wait_resp)
> {
> - struct usb_interface *intf = to_usb_interface(dev->dev);
> - struct usb_device *udev = interface_to_usbdev(intf);
> struct mt76_usb *usb = &dev->usb;
> - unsigned int pipe;
> - int ret, sent;
> + int ret;
> u8 seq = 0;
> u32 info;
>
> @@ -135,7 +132,6 @@ __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
> if (test_bit(MT76_REMOVED, &dev->state))
> return 0;
>
> - pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
> if (wait_resp) {
> seq = ++usb->mcu.msg_seq & 0xf;
> if (!seq)
> @@ -149,7 +145,7 @@ __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
> if (ret)
> return ret;
>
> - ret = usb_bulk_msg(udev, pipe, skb->data, skb->len, &sent, 500);
> + ret = mt76u_bulk_msg(dev, skb->data, skb->len, 500);
> if (ret)
> return ret;
>
> @@ -263,14 +259,12 @@ void mt76x02u_mcu_fw_reset(struct mt76x02_dev *dev)
> EXPORT_SYMBOL_GPL(mt76x02u_mcu_fw_reset);
>
> static int
> -__mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, struct mt76u_buf *buf,
> +__mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, u8 *data,
> const void *fw_data, int len, u32 dst_addr)
> {
> - u8 *data = sg_virt(&buf->urb->sg[0]);
> - DECLARE_COMPLETION_ONSTACK(cmpl);
> __le32 info;
> u32 val;
> - int err;
> + int err, data_len;
>
> info = cpu_to_le32(FIELD_PREP(MT_MCU_MSG_PORT, CPU_TX_PORT) |
> FIELD_PREP(MT_MCU_MSG_LEN, len) |
> @@ -286,25 +280,12 @@ __mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, struct mt76u_buf *buf,
> mt76u_single_wr(&dev->mt76, MT_VEND_WRITE_FCE,
> MT_FCE_DMA_LEN, len << 16);
>
> - buf->len = MT_CMD_HDR_LEN + len + sizeof(info);
> - err = mt76u_submit_buf(&dev->mt76, USB_DIR_OUT,
> - MT_EP_OUT_INBAND_CMD,
> - buf, GFP_KERNEL,
> - mt76u_mcu_complete_urb, &cmpl);
> - if (err < 0)
> - return err;
> -
> - if (!wait_for_completion_timeout(&cmpl,
> - msecs_to_jiffies(1000))) {
> - dev_err(dev->mt76.dev, "firmware upload timed out\n");
> - usb_kill_urb(buf->urb);
> - return -ETIMEDOUT;
> - }
> + data_len = MT_CMD_HDR_LEN + len + sizeof(info);
>
> - if (mt76u_urb_error(buf->urb)) {
> - dev_err(dev->mt76.dev, "firmware upload failed: %d\n",
> - buf->urb->status);
> - return buf->urb->status;
> + err = mt76u_bulk_msg(&dev->mt76, data, data_len, 1000);
> + if (err) {
> + dev_err(dev->mt76.dev, "firmware upload failed: %d\n", err);
> + return err;
> }
>
> val = mt76_rr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX);
> @@ -317,17 +298,16 @@ __mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, struct mt76u_buf *buf,
> int mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, const void *data,
> int data_len, u32 max_payload, u32 offset)
> {
> - int err, len, pos = 0, max_len = max_payload - 8;
> - struct mt76u_buf buf;
> + int len, err = 0, pos = 0, max_len = max_payload - 8;
> + u8 *buf;
>
> - err = mt76u_buf_alloc(&dev->mt76, &buf, 1, max_payload, max_payload,
> - GFP_KERNEL);
> - if (err < 0)
> - return err;
> + buf = kmalloc(max_payload, GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
>
> while (data_len > 0) {
> len = min_t(int, data_len, max_len);
> - err = __mt76x02u_mcu_fw_send_data(dev, &buf, data + pos,
> + err = __mt76x02u_mcu_fw_send_data(dev, buf, data + pos,
> len, offset + pos);
> if (err < 0)
> break;
> @@ -336,7 +316,7 @@ int mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, const void *data,
> pos += len;
> usleep_range(5000, 10000);
> }
> - mt76u_buf_free(&buf);
> + kfree(buf);
>
> return err;
> }
> diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
> index 5f0faf07c346..358a95a2bbcb 100644
> --- a/drivers/net/wireless/mediatek/mt76/usb.c
> +++ b/drivers/net/wireless/mediatek/mt76/usb.c
> @@ -328,7 +328,6 @@ int mt76u_buf_alloc(struct mt76_dev *dev, struct mt76u_buf *buf,
>
> return mt76u_fill_rx_sg(dev, buf, nsgs, len, sglen);
> }
> -EXPORT_SYMBOL_GPL(mt76u_buf_alloc);
>
> void mt76u_buf_free(struct mt76u_buf *buf)
> {
> --
> 2.19.2
>

2019-02-11 19:03:41

by Felix Fietkau

[permalink] [raw]
Subject: Re: [PATCH] mt76x02u: use usb_bulk_msg to upload firmware

On 2019-02-11 09:16, Stanislaw Gruszka wrote:
> We don't need to send firmware data asynchronously, much simpler is just
> use synchronous usb_bulk_msg().
>
> Signed-off-by: Stanislaw Gruszka <[email protected]>
Applied, thanks.

- Felix