- tx power is stored in the channels after ieee80211_register_hw, so
chan->orig_mpwr needs to be updated as well
- for non-TSSI devices, mt76x2e needs to use a different target power value
from the EEPROM
- fix a rounding error in a few places (need to round up, not down)
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mac80211.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/init.c | 1 +
drivers/net/wireless/mediatek/mt76/mt76x0/init.c | 1 +
drivers/net/wireless/mediatek/mt76/mt76x2/init.c | 12 +++---------
drivers/net/wireless/mediatek/mt76/mt76x2/phy.c | 6 +++---
5 files changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mac80211.c b/drivers/net/wireless/mediatek/mt76/mac80211.c
index f0d418b751ad..4b63d061c2a0 100644
--- a/drivers/net/wireless/mediatek/mt76/mac80211.c
+++ b/drivers/net/wireless/mediatek/mt76/mac80211.c
@@ -745,7 +745,7 @@ int mt76_get_txpower(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct mt76_dev *dev = hw->priv;
int n_chains = hweight8(dev->antenna_mask);
- *dbm = dev->txpower_cur / 2;
+ *dbm = DIV_ROUND_UP(dev->txpower_cur, 2);
/* convert from per-chain power to combined
* output on 2x2 devices
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/init.c b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
index a84b239887ca..569c61b9b5ae 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
@@ -488,6 +488,7 @@ mt7603_init_txpower(struct mt7603_dev *dev,
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
chan->max_power = target_power;
+ chan->orig_mpwr = target_power;
}
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/init.c b/drivers/net/wireless/mediatek/mt76/mt76x0/init.c
index e5f4ce3b595b..57e46d57b449 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/init.c
@@ -280,6 +280,7 @@ mt76x0_init_txpower(struct mt76x02_dev *dev,
mt76x0_get_power_info(dev, chan, &tp);
chan->max_power = (mt76x02_get_max_rate_power(&t) + tp) / 2;
+ chan->orig_mpwr = chan->max_power;
}
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/init.c b/drivers/net/wireless/mediatek/mt76/mt76x2/init.c
index a30ef2c5a9db..c6078e90ca43 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/init.c
@@ -165,27 +165,21 @@ void mt76x2_init_txpower(struct mt76x02_dev *dev,
struct ieee80211_channel *chan;
struct mt76x2_tx_power_info txp;
struct mt76_rate_power t = {};
- int target_power;
int i;
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
mt76x2_get_power_info(dev, &txp, chan);
-
- target_power = max_t(int, (txp.chain[0].target_power +
- txp.chain[0].delta),
- (txp.chain[1].target_power +
- txp.chain[1].delta));
-
mt76x2_get_rate_power(dev, &t, chan);
chan->max_power = mt76x02_get_max_rate_power(&t) +
- target_power;
- chan->max_power /= 2;
+ txp.target_power;
+ chan->max_power = DIV_ROUND_UP(chan->max_power, 2);
/* convert to combined output power on 2x2 devices */
chan->max_power += 3;
+ chan->orig_mpwr = chan->max_power;
}
}
EXPORT_SYMBOL_GPL(mt76x2_init_txpower);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
index 769a9b972044..cdedf95ca4f5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
@@ -161,12 +161,12 @@ void mt76x2_phy_set_txpower(struct mt76x02_dev *dev)
delta = txp.delta_bw80;
mt76x2_get_rate_power(dev, &t, chan);
- mt76x02_add_rate_power_offset(&t, txp.chain[0].target_power);
+ mt76x02_add_rate_power_offset(&t, txp.target_power + delta);
mt76x02_limit_rate_power(&t, dev->mt76.txpower_conf);
dev->mt76.txpower_cur = mt76x02_get_max_rate_power(&t);
base_power = mt76x2_get_min_rate_power(&t);
- delta += base_power - txp.chain[0].target_power;
+ delta = base_power - txp.target_power;
txp_0 = txp.chain[0].target_power + txp.chain[0].delta + delta;
txp_1 = txp.chain[1].target_power + txp.chain[1].delta + delta;
@@ -182,7 +182,7 @@ void mt76x2_phy_set_txpower(struct mt76x02_dev *dev)
}
mt76x02_add_rate_power_offset(&t, -base_power);
- dev->target_power = txp.chain[0].target_power;
+ dev->target_power = txp.target_power;
dev->target_power_delta[0] = txp_0 - txp.chain[0].target_power;
dev->target_power_delta[1] = txp_1 - txp.chain[0].target_power;
dev->mt76.rate_power = t;
--
2.17.0