Now that tx status reporting can figure out the first attempted rate, we can
make switching from lower rates to higher rates more conservative.
This reduces retries under bad link conditions and ensures that fallback
rates get more test coverage
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7603/init.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/init.c b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
index d666e26afe90..357db811ad32 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
@@ -227,7 +227,16 @@ mt7603_mac_init(struct mt7603_dev *dev)
mt76_rmw_field(dev, MT_LPON_BTEIR, MT_LPON_BTEIR_MBSS_MODE, 2);
mt76_rmw_field(dev, MT_WF_RMACDR, MT_WF_RMACDR_MBSSID_MASK, 2);
- mt76_wr(dev, MT_AGG_ARUCR, FIELD_PREP(MT_AGG_ARxCR_LIMIT(0), 7));
+ mt76_wr(dev, MT_AGG_ARUCR,
+ FIELD_PREP(MT_AGG_ARxCR_LIMIT(0), 7) |
+ FIELD_PREP(MT_AGG_ARxCR_LIMIT(1), 2) |
+ FIELD_PREP(MT_AGG_ARxCR_LIMIT(2), 2) |
+ FIELD_PREP(MT_AGG_ARxCR_LIMIT(3), 2) |
+ FIELD_PREP(MT_AGG_ARxCR_LIMIT(4), 1) |
+ FIELD_PREP(MT_AGG_ARxCR_LIMIT(5), 1) |
+ FIELD_PREP(MT_AGG_ARxCR_LIMIT(6), 1) |
+ FIELD_PREP(MT_AGG_ARxCR_LIMIT(7), 1));
+
mt76_wr(dev, MT_AGG_ARDCR,
FIELD_PREP(MT_AGG_ARxCR_LIMIT(0), MT7603_RATE_RETRY - 1) |
FIELD_PREP(MT_AGG_ARxCR_LIMIT(1), MT7603_RATE_RETRY - 1) |
--
2.17.0