When sending EEPROM data to the MCU, MT7622 uses a longer buffer
Co-developed-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
---
.../net/wireless/mediatek/mt76/mt7615/eeprom.c | 1 +
.../net/wireless/mediatek/mt76/mt7615/eeprom.h | 3 ++-
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 17 +++++++++++------
3 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
index e4dcfa531a24..3c3570332366 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
@@ -84,6 +84,7 @@ static int mt7615_check_eeprom(struct mt76_dev *dev)
switch (val) {
case 0x7615:
+ case 0x7622:
return 0;
default:
return -EINVAL;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h
index c3bc69ac210e..18c7301521b7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h
@@ -21,7 +21,8 @@ enum mt7615_eeprom_field {
MT_EE_TX2_5G_G0_TARGET_POWER = 0x142,
MT_EE_TX3_5G_G0_TARGET_POWER = 0x16a,
- __MT_EE_MAX = 0x3bf
+ MT7615_EE_MAX = 0x3bf,
+ MT7622_EE_MAX = 0x3db,
};
#define MT_EE_NIC_CONF_TX_MASK GENMASK(7, 4)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 2352e7687790..e51e584bf81f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -621,18 +621,23 @@ int mt7615_mcu_set_eeprom(struct mt7615_dev *dev)
__le16 len;
} __packed req_hdr = {
.buffer_mode = 1,
- .len = cpu_to_le16(__MT_EE_MAX - MT_EE_NIC_CONF_0),
};
- int ret, len = sizeof(req_hdr) + __MT_EE_MAX - MT_EE_NIC_CONF_0;
+ int ret, len, eep_len;
u8 *req, *eep = (u8 *)dev->mt76.eeprom.data;
+ if (is_mt7622(&dev->mt76))
+ eep_len = MT7622_EE_MAX - MT_EE_NIC_CONF_0;
+ else
+ eep_len = MT7615_EE_MAX - MT_EE_NIC_CONF_0;
+
+ len = sizeof(req_hdr) + eep_len;
req = kzalloc(len, GFP_KERNEL);
if (!req)
return -ENOMEM;
+ req_hdr.len = cpu_to_le16(eep_len);
memcpy(req, &req_hdr, sizeof(req_hdr));
- memcpy(req + sizeof(req_hdr), eep + MT_EE_NIC_CONF_0,
- __MT_EE_MAX - MT_EE_NIC_CONF_0);
+ memcpy(req + sizeof(req_hdr), eep + MT_EE_NIC_CONF_0, eep_len);
ret = __mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_EFUSE_BUFFER_MODE,
req, len, true);
@@ -1285,7 +1290,7 @@ int mt7615_mcu_set_tx_power(struct mt7615_phy *phy)
};
s8 tx_power;
- len = sizeof(req_hdr) + __MT_EE_MAX - MT_EE_NIC_CONF_0;
+ len = sizeof(req_hdr) + MT7615_EE_MAX - MT_EE_NIC_CONF_0;
req = kzalloc(len, GFP_KERNEL);
if (!req)
return -ENOMEM;
@@ -1293,7 +1298,7 @@ int mt7615_mcu_set_tx_power(struct mt7615_phy *phy)
memcpy(req, &req_hdr, sizeof(req_hdr));
data = req + sizeof(req_hdr);
memcpy(data, eep + MT_EE_NIC_CONF_0,
- __MT_EE_MAX - MT_EE_NIC_CONF_0);
+ MT7615_EE_MAX - MT_EE_NIC_CONF_0);
tx_power = hw->conf.power_level * 2;
switch (n_chains) {
--
2.24.0