From: Yan-Hsuan Chuang <[email protected]>
Since RTL8822CE has enabled reference clock auto calibration,
there is no need to add any clock delay for covering the timing
gap of the reference clock.
Signed-off-by: Yan-Hsuan Chuang <[email protected]>
---
drivers/net/wireless/realtek/rtw88/pci.c | 7 +++++++
drivers/net/wireless/realtek/rtw88/pci.h | 1 +
2 files changed, 8 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c
index 1fbc14c149ec..9ac77aef708d 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.c
+++ b/drivers/net/wireless/realtek/rtw88/pci.c
@@ -1197,11 +1197,18 @@ static void rtw_pci_link_ps(struct rtw_dev *rtwdev, bool enter)
static void rtw_pci_link_cfg(struct rtw_dev *rtwdev)
{
+ struct rtw_chip_info *chip = rtwdev->chip;
struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv;
struct pci_dev *pdev = rtwpci->pdev;
u16 link_ctrl;
int ret;
+ /* RTL8822CE has enabled REFCLK auto calibration, it does not need
+ * to add clock delay to cover the REFCLK timing gap.
+ */
+ if (chip->id == RTW_CHIP_TYPE_8822C)
+ rtw_dbi_write8(rtwdev, RTK_PCIE_CLKDLY_CTRL, 0);
+
/* Though there is standard PCIE configuration space to set the
* link control register, but by Realtek's design, driver should
* check if host supports CLKREQ/ASPM to enable the HW module.
diff --git a/drivers/net/wireless/realtek/rtw88/pci.h b/drivers/net/wireless/realtek/rtw88/pci.h
index 1580cfc57361..cd4fcd064cdb 100644
--- a/drivers/net/wireless/realtek/rtw88/pci.h
+++ b/drivers/net/wireless/realtek/rtw88/pci.h
@@ -39,6 +39,7 @@
#define RTK_PCIE_LINK_CFG 0x0719
#define BIT_CLKREQ_SW_EN BIT(4)
#define BIT_L1_SW_EN BIT(3)
+#define RTK_PCIE_CLKDLY_CTRL 0x0725
#define BIT_PCI_BCNQ_FLAG BIT(4)
#define RTK_PCI_TXBD_DESA_BCNQ 0x308
--
2.17.1