From: Yan-Hsuan Chuang <[email protected]>
This patchset applies regulatory rules for Realtek's chip set.
Some of the modules are programmed country-specific code in the efuse.
And for this kind of modules, driver doesn't want the regulatory to be
changed, so the driver tends to not listen to the regulatory hint that
is notified by the stack. Otherwise if the modules are not programmed
to a country-specific code, then the world-wide (WW) settings will be
adopted. If the regulatory is WW, the driver will apply the settings
notified by the stack.
If anyone wants to allow regulatory being set from user-space tools
(ex: iw reg set), a compile option flag RTW88_REGD_USER_REG_HINTS
should be set to allow regulatory hist from user.
Also add "Adaptivity" support for some special country codes, because
they have to stop TX immediately if there's any energy detected.
v2 -> v3
* split patch set for further discussion
v3 -> v4
* squash patch set, since nobody has different idea for it
* "rtw88: add regulatory process strategy for different chipset" and
"rtw88: support dynamic user regulatory setting" are squashed
* modify the commit log to better describe it
* add a new patch for adaptivity support "rtw88: add adaptivity
support for EU/JP regulatory"
v4 -> v5
* check return value of kstrtobool()
v5 -> v6
* remove custom world-wide, use stack world-wide
* surface err codes by printing logs
* fix incorrect debugfs set parameter for edcca enable
v6 -> v7
* restore custom world-wide, because of not to modify USER settings
* modify commit message to be more clear
Tzu-En Huang (2):
rtw88: add regulatory process strategy for different chipset
rtw88: add adaptivity support for EU/JP regulatory
drivers/net/wireless/realtek/rtw88/Kconfig | 10 +++
drivers/net/wireless/realtek/rtw88/debug.c | 33 +++++++
drivers/net/wireless/realtek/rtw88/main.c | 8 +-
drivers/net/wireless/realtek/rtw88/main.h | 33 +++++++
drivers/net/wireless/realtek/rtw88/phy.c | 60 +++++++++++++
drivers/net/wireless/realtek/rtw88/phy.h | 2 +
drivers/net/wireless/realtek/rtw88/reg.h | 2 +
drivers/net/wireless/realtek/rtw88/regd.c | 85 +++++++++++++++++--
drivers/net/wireless/realtek/rtw88/regd.h | 2 +
drivers/net/wireless/realtek/rtw88/rtw8822b.c | 41 +++++++++
drivers/net/wireless/realtek/rtw88/rtw8822b.h | 6 ++
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 45 ++++++++++
drivers/net/wireless/realtek/rtw88/rtw8822c.h | 2 +
13 files changed, 318 insertions(+), 11 deletions(-)
--
2.17.1
From: Tzu-En Huang <[email protected]>
In Realtek chipset, there are 2 different settings of regulatory,
worldwide chipsets, and chipsets with a specific country.
Since we do not want stack to possibly decrease driver's regulatory,
REGULATORY_STRICT_REG is set, i.e. rtw88 will have the control of its
regulatory. And we ignore regulatory notifications set from user-space,
unless compiled with the compile flag option RTW88_REGD_USER_REG_HINTS.
Regarding chipsets with a specific country, driver calls
regulatory_hint() to tell the stack what regulatory it is. As we do
not want the regulatory of this chipset be changed, driver will not
apply new regulatory notifications from either DRIVER, USER or
COUNTRY_IE.
And for worldwide chipsets, there are many cases we want to describe.
Let's start with case without RTW88_REGD_USER_REG_HINTS. In worldwide
mode, we want to follow the regulatory of an associated AP, but we do
not want to follow the regulatory from other drivers, so we will apply
regulatory notifications from COUNTRY_IE.
For cases with RTW88_REGD_USER_REG_HINTS, if there are not any USER
notifications, driver will also follow the AP's regulatory. On the other
hand, if there are notifications from USER, we want to make sure that the
settings from user-space will not be violated when associating to a new
AP. In this situation, stack will change the regulatory to AP's. And
because we have set REGULATORY_STRICT_REG, stack will intersect driver's
regulatory with AP's. Thus, we provide a custom worldwide regulatory for
intersection, and the result of it will never violate the setting from
USER.
Signed-off-by: Tzu-En Huang <[email protected]>
Signed-off-by: Yan-Hsuan Chuang <[email protected]>
---
v3 -> v4
* squashed with "rtw88: support dynamic user regulatory setting"
* modify the commit log
v4 -> v5
* no change
v5 -> v6
* remove custom world-wide, use stack world-wide
* surface error codes
v6 -> v7
* restore custom world-wide
* modify commit message to be more clear
drivers/net/wireless/realtek/rtw88/Kconfig | 10 ++++
drivers/net/wireless/realtek/rtw88/main.c | 7 ++-
drivers/net/wireless/realtek/rtw88/main.h | 1 +
drivers/net/wireless/realtek/rtw88/regd.c | 63 ++++++++++++++++++----
4 files changed, 70 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig
index 33bd7ed797ff..04b84ec1dfc1 100644
--- a/drivers/net/wireless/realtek/rtw88/Kconfig
+++ b/drivers/net/wireless/realtek/rtw88/Kconfig
@@ -52,4 +52,14 @@ config RTW88_DEBUGFS
If unsure, say Y to simplify debug problems
+config RTW88_REGD_USER_REG_HINTS
+ bool "Realtek rtw88 user regulatory hints"
+ depends on RTW88_CORE
+ default n
+ help
+ Enable regulatoy user hints
+
+ If unsure, say N. This should only be allowed on distributions
+ that need this to correct the regulatory.
+
endif
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 7640e97706f5..aa23b084adb0 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1501,8 +1501,11 @@ int rtw_register_hw(struct rtw_dev *rtwdev, struct ieee80211_hw *hw)
return ret;
}
- if (regulatory_hint(hw->wiphy, rtwdev->regd.alpha2))
- rtw_err(rtwdev, "regulatory_hint fail\n");
+ if (!rtwdev->efuse.country_worldwide) {
+ ret = regulatory_hint(hw->wiphy, rtwdev->efuse.country_code);
+ if (ret)
+ rtw_warn(rtwdev, "failed to hint regulatory:%d\n", ret);
+ }
rtw_debugfs_init(rtwdev);
diff --git a/drivers/net/wireless/realtek/rtw88/main.h b/drivers/net/wireless/realtek/rtw88/main.h
index c6b590fdb573..35ffc8c6e949 100644
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -1446,6 +1446,7 @@ struct rtw_efuse {
u8 addr[ETH_ALEN];
u8 channel_plan;
u8 country_code[2];
+ bool country_worldwide;
u8 rf_board_option;
u8 rfe_option;
u8 power_track_type;
diff --git a/drivers/net/wireless/realtek/rtw88/regd.c b/drivers/net/wireless/realtek/rtw88/regd.c
index 69744dd65968..27a7fe8395f4 100644
--- a/drivers/net/wireless/realtek/rtw88/regd.c
+++ b/drivers/net/wireless/realtek/rtw88/regd.c
@@ -7,6 +7,18 @@
#include "debug.h"
#include "phy.h"
+static const struct ieee80211_regdomain rtw88_world_regdom = {
+ .n_reg_rules = 5,
+ .alpha2 = "99",
+ .reg_rules = {
+ REG_RULE(2412 - 10, 2462 + 10, 40, 0, 20, 0),
+ REG_RULE(2467 - 10, 2484 + 10, 40, 0, 20, NL80211_RRF_NO_IR),
+ REG_RULE(5180 - 10, 5240 + 10, 80, 0, 20, NL80211_RRF_NO_IR),
+ REG_RULE(5260 - 10, 5700 + 10, 80, 0, 20,
+ NL80211_RRF_NO_IR | NL80211_RRF_DFS),
+ REG_RULE(5745 - 10, 5825 + 10, 80, 0, 20, NL80211_RRF_NO_IR),
+ }
+};
#define COUNTRY_CHPLAN_ENT(_alpha2, _chplan, _txpwr_regd) \
{.alpha2 = (_alpha2), \
.chplan = (_chplan), \
@@ -339,12 +351,31 @@ static struct rtw_regulatory rtw_regd_find_reg_by_name(char *alpha2)
return rtw_defined_chplan;
}
+static bool rtw_regd_is_ww(struct rtw_regulatory *reg)
+{
+ if (reg->txpwr_regd == RTW_REGD_WW)
+ return true;
+ return false;
+}
+
static int rtw_regd_notifier_apply(struct rtw_dev *rtwdev,
struct wiphy *wiphy,
struct regulatory_request *request)
{
- if (request->initiator == NL80211_REGDOM_SET_BY_USER)
+ if (request->initiator == NL80211_REGDOM_SET_BY_DRIVER)
+ return -ENOTSUPP;
+ if (request->initiator == NL80211_REGDOM_SET_BY_USER &&
+ !IS_ENABLED(CONFIG_RTW88_REGD_USER_REG_HINTS))
+ return -EPERM;
+ if (request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+ !rtw_regd_is_ww(&rtwdev->regd))
+ return -EINVAL;
+ if (request->initiator == NL80211_REGDOM_SET_BY_CORE &&
+ !rtwdev->efuse.country_worldwide) {
+ rtwdev->regd =
+ rtw_regd_find_reg_by_name(rtwdev->efuse.country_code);
return 0;
+ }
rtwdev->regd = rtw_regd_find_reg_by_name(request->alpha2);
rtw_regd_apply_world_flags(wiphy, request->initiator);
@@ -352,15 +383,22 @@ static int rtw_regd_notifier_apply(struct rtw_dev *rtwdev,
}
static int
-rtw_regd_init_wiphy(struct rtw_regulatory *reg, struct wiphy *wiphy,
+rtw_regd_init_wiphy(struct rtw_dev *rtwdev, struct wiphy *wiphy,
void (*reg_notifier)(struct wiphy *wiphy,
struct regulatory_request *request))
{
+ struct rtw_regulatory *reg = &rtwdev->regd;
+
wiphy->reg_notifier = reg_notifier;
- wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG;
- wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG;
- wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS;
+ if (rtw_regd_is_ww(reg)) {
+ rtwdev->efuse.country_worldwide = true;
+ wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG;
+ wiphy_apply_custom_regulatory(wiphy, &rtw88_world_regdom);
+ } else {
+ rtwdev->efuse.country_worldwide = false;
+ }
+ wiphy->regulatory_flags |= REGULATORY_STRICT_REG;
rtw_regd_apply_hw_cap_flags(wiphy);
@@ -377,7 +415,7 @@ int rtw_regd_init(struct rtw_dev *rtwdev,
return -EINVAL;
rtwdev->regd = rtw_regd_find_reg_by_name(rtwdev->efuse.country_code);
- rtw_regd_init_wiphy(&rtwdev->regd, wiphy, reg_notifier);
+ rtw_regd_init_wiphy(rtwdev, wiphy, reg_notifier);
return 0;
}
@@ -387,12 +425,19 @@ void rtw_regd_notifier(struct wiphy *wiphy, struct regulatory_request *request)
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
struct rtw_dev *rtwdev = hw->priv;
struct rtw_hal *hal = &rtwdev->hal;
+ int ret;
- rtw_regd_notifier_apply(rtwdev, wiphy, request);
+ ret = rtw_regd_notifier_apply(rtwdev, wiphy, request);
+ if (ret) {
+ rtw_warn(rtwdev, "failed to apply regulatory from initiator %d: %d\n",
+ request->initiator, ret);
+ return;
+ }
rtw_dbg(rtwdev, RTW_DBG_REGD,
"get alpha2 %c%c from initiator %d, mapping to chplan 0x%x, txregd %d\n",
- request->alpha2[0], request->alpha2[1], request->initiator,
- rtwdev->regd.chplan, rtwdev->regd.txpwr_regd);
+ request->alpha2[0], request->alpha2[1],
+ request->initiator, rtwdev->regd.chplan,
+ rtwdev->regd.txpwr_regd);
rtw_phy_set_tx_power_level(rtwdev, hal->current_channel);
}
--
2.17.1
From: Tzu-En Huang <[email protected]>
From MIC Ordinance Regulating Radio Equipment article 49.20,
ETSI EN-300-328 and EN-301-893, the device should be able to
dynamically pause TX activity when energy detected on the air.
To achieve this, add Energy Detected CCA (EDCCA) support to
detect the energy in the channel. Driver will set corresponding
thresholds to the device, if the energy detected exceeds the
threshold, the TX activity will be halted immediately.
As this could lead to performance downgrade when the environment
is noisy, add a debugfs to disable this for debugging usage.
Signed-off-by: Tzu-En Huang <[email protected]>
Signed-off-by: Yan-Hsuan Chuang <[email protected]>
---
v4
* first added
v4 -> v5
* check return value of kstrtobool()
v5 -> v6
* fix incorrect edcca set parameter
v6 -> v7
* no change
drivers/net/wireless/realtek/rtw88/debug.c | 33 ++++++++++
drivers/net/wireless/realtek/rtw88/main.c | 1 +
drivers/net/wireless/realtek/rtw88/main.h | 32 ++++++++++
drivers/net/wireless/realtek/rtw88/phy.c | 60 +++++++++++++++++++
drivers/net/wireless/realtek/rtw88/phy.h | 2 +
drivers/net/wireless/realtek/rtw88/reg.h | 2 +
drivers/net/wireless/realtek/rtw88/regd.c | 22 +++++++
drivers/net/wireless/realtek/rtw88/regd.h | 2 +
drivers/net/wireless/realtek/rtw88/rtw8822b.c | 41 +++++++++++++
drivers/net/wireless/realtek/rtw88/rtw8822b.h | 6 ++
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 45 ++++++++++++++
drivers/net/wireless/realtek/rtw88/rtw8822c.h | 2 +
12 files changed, 248 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/debug.c b/drivers/net/wireless/realtek/rtw88/debug.c
index b4964306de61..7584bfd09c7b 100644
--- a/drivers/net/wireless/realtek/rtw88/debug.c
+++ b/drivers/net/wireless/realtek/rtw88/debug.c
@@ -745,6 +745,33 @@ static int rtw_debugfs_get_coex_enable(struct seq_file *m, void *v)
return 0;
}
+static ssize_t rtw_debugfs_set_edcca_enable(struct file *filp,
+ const char __user *buffer,
+ size_t count, loff_t *loff)
+{
+ struct rtw_debugfs_priv *debugfs_priv = filp->private_data;
+ struct rtw_dev *rtwdev = debugfs_priv->rtwdev;
+ char tmp[32 + 1];
+
+ rtw_debugfs_copy_from_user(tmp, sizeof(tmp), buffer, count, 1);
+
+ kstrtobool(tmp, &rtw_edcca_enabled);
+ rtw_phy_adaptivity_set_mode(rtwdev);
+
+ return count;
+}
+
+static int rtw_debugfs_get_edcca_enable(struct seq_file *m, void *v)
+{
+ struct rtw_debugfs_priv *debugfs_priv = m->private;
+ struct rtw_dev *rtwdev = debugfs_priv->rtwdev;
+ struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+
+ seq_printf(m, "EDCCA mode %d\n", dm_info->edcca_mode);
+
+ return 0;
+}
+
#define rtw_debug_impl_mac(page, addr) \
static struct rtw_debugfs_priv rtw_debug_priv_mac_ ##page = { \
.cb_read = rtw_debug_get_mac_page, \
@@ -844,6 +871,11 @@ static struct rtw_debugfs_priv rtw_debug_priv_coex_info = {
.cb_read = rtw_debugfs_get_coex_info,
};
+static struct rtw_debugfs_priv rtw_debug_priv_edcca_enable = {
+ .cb_write = rtw_debugfs_set_edcca_enable,
+ .cb_read = rtw_debugfs_get_edcca_enable,
+};
+
#define rtw_debugfs_add_core(name, mode, fopname, parent) \
do { \
rtw_debug_priv_ ##name.rtwdev = rtwdev; \
@@ -916,6 +948,7 @@ void rtw_debugfs_init(struct rtw_dev *rtwdev)
}
rtw_debugfs_add_r(rf_dump);
rtw_debugfs_add_r(tx_pwr_tbl);
+ rtw_debugfs_add_rw(edcca_enable);
}
#endif /* CONFIG_RTW88_DEBUGFS */
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index aa23b084adb0..e6c8fc01e521 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -21,6 +21,7 @@ EXPORT_SYMBOL(rtw_fw_lps_deep_mode);
bool rtw_bf_support = true;
unsigned int rtw_debug_mask;
EXPORT_SYMBOL(rtw_debug_mask);
+bool rtw_edcca_enabled = true;
module_param_named(lps_deep_mode, rtw_fw_lps_deep_mode, uint, 0644);
module_param_named(support_bf, rtw_bf_support, bool, 0644);
diff --git a/drivers/net/wireless/realtek/rtw88/main.h b/drivers/net/wireless/realtek/rtw88/main.h
index 35ffc8c6e949..84385a0b9784 100644
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -38,6 +38,7 @@
extern bool rtw_bf_support;
extern unsigned int rtw_fw_lps_deep_mode;
extern unsigned int rtw_debug_mask;
+extern bool rtw_edcca_enabled;
extern const struct ieee80211_ops rtw_ops;
extern struct rtw_chip_info rtw8822b_hw_spec;
extern struct rtw_chip_info rtw8822c_hw_spec;
@@ -327,6 +328,8 @@ enum rtw_trx_desc_rate {
DESC_RATE_MAX,
};
+#define RTW_REGION_INVALID 0xff
+
enum rtw_regulatory_domains {
RTW_REGD_FCC = 0,
RTW_REGD_MKK = 1,
@@ -527,6 +530,11 @@ struct rtw_reg_domain {
u8 domain;
};
+struct rtw_hw_reg_offset {
+ struct rtw_hw_reg hw_reg;
+ u8 offset;
+};
+
struct rtw_backup_info {
u8 len;
u32 reg;
@@ -780,6 +788,7 @@ struct rtw_regulatory {
char alpha2[2];
u8 chplan;
u8 txpwr_regd;
+ enum nl80211_dfs_regions region;
};
struct rtw_chip_ops {
@@ -813,6 +822,8 @@ struct rtw_chip_ops {
struct ieee80211_bss_conf *conf);
void (*cfg_csi_rate)(struct rtw_dev *rtwdev, u8 rssi, u8 cur_rate,
u8 fixrate_en, u8 *new_rate);
+ void (*adaptivity_init)(struct rtw_dev *rtwdev);
+ void (*adaptivity)(struct rtw_dev *rtwdev);
/* for coex */
void (*coex_set_init)(struct rtw_dev *rtwdev);
@@ -1101,6 +1112,10 @@ struct rtw_chip_info {
u8 bfer_su_max_num;
u8 bfer_mu_max_num;
+ struct rtw_hw_reg_offset *edcca_th;
+ s8 l2h_th_ini_cs;
+ s8 l2h_th_ini_ad;
+
const char *wow_fw_name;
const struct wiphy_wowlan_support *wowlan_stub;
const u8 max_sched_scan_ssids;
@@ -1376,6 +1391,20 @@ struct rtw_pkt_count {
DECLARE_EWMA(evm, 10, 4);
DECLARE_EWMA(snr, 10, 4);
+#define EDCCA_TH_L2H_IDX 0
+#define EDCCA_TH_H2L_IDX 1
+#define EDCCA_TH_L2H_LB 48
+#define EDCCA_ADC_BACKOFF 12
+#define EDCCA_IGI_BASE 50
+#define EDCCA_IGI_L2H_DIFF 8
+#define EDCCA_L2H_H2L_DIFF 7
+#define EDCCA_L2H_H2L_DIFF_NORMAL 8
+
+enum rtw_edcca_mode {
+ RTW_EDCCA_NORMAL = 0,
+ RTW_EDCCA_ADAPTIVITY = 1,
+};
+
struct rtw_dm_info {
u32 cck_fa_cnt;
u32 ofdm_fa_cnt;
@@ -1435,6 +1464,9 @@ struct rtw_dm_info {
struct rtw_pkt_count last_pkt_count;
struct ewma_evm ewma_evm[RTW_EVM_NUM];
struct ewma_snr ewma_snr[RTW_SNR_NUM];
+
+ s8 l2h_th_ini;
+ enum rtw_edcca_mode edcca_mode;
};
struct rtw_efuse {
diff --git a/drivers/net/wireless/realtek/rtw88/phy.c b/drivers/net/wireless/realtek/rtw88/phy.c
index 8793dd22188f..9e398c18f631 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.c
+++ b/drivers/net/wireless/realtek/rtw88/phy.c
@@ -9,6 +9,7 @@
#include "fw.h"
#include "phy.h"
#include "debug.h"
+#include "regd.h"
struct phy_cfg_pair {
u32 addr;
@@ -115,6 +116,57 @@ static void rtw_phy_cck_pd_init(struct rtw_dev *rtwdev)
dm_info->cck_fa_avg = CCK_FA_AVG_RESET;
}
+void rtw_phy_set_edcca_th(struct rtw_dev *rtwdev, u8 l2h, u8 h2l)
+{
+ struct rtw_hw_reg_offset *edcca_th = rtwdev->chip->edcca_th;
+
+ rtw_write32_mask(rtwdev,
+ edcca_th[EDCCA_TH_L2H_IDX].hw_reg.addr,
+ edcca_th[EDCCA_TH_L2H_IDX].hw_reg.mask,
+ l2h + edcca_th[EDCCA_TH_L2H_IDX].offset);
+ rtw_write32_mask(rtwdev,
+ edcca_th[EDCCA_TH_H2L_IDX].hw_reg.addr,
+ edcca_th[EDCCA_TH_H2L_IDX].hw_reg.mask,
+ h2l + edcca_th[EDCCA_TH_H2L_IDX].offset);
+}
+
+void rtw_phy_adaptivity_set_mode(struct rtw_dev *rtwdev)
+{
+ struct rtw_chip_info *chip = rtwdev->chip;
+ struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+
+ /* turn off in debugfs for debug usage */
+ if (!rtw_edcca_enabled) {
+ dm_info->edcca_mode = RTW_EDCCA_NORMAL;
+ rtw_dbg(rtwdev, RTW_DBG_PHY, "EDCCA disabled, cannot be set\n");
+ return;
+ }
+
+ switch (rtwdev->regd.region) {
+ case NL80211_DFS_ETSI:
+ dm_info->edcca_mode = RTW_EDCCA_ADAPTIVITY;
+ dm_info->l2h_th_ini = chip->l2h_th_ini_ad;
+ break;
+ case NL80211_DFS_JP:
+ dm_info->edcca_mode = RTW_EDCCA_ADAPTIVITY;
+ dm_info->l2h_th_ini = chip->l2h_th_ini_cs;
+ break;
+ default:
+ dm_info->edcca_mode = RTW_EDCCA_NORMAL;
+ break;
+ }
+}
+
+static void rtw_phy_adaptivity_init(struct rtw_dev *rtwdev)
+{
+ struct rtw_chip_info *chip = rtwdev->chip;
+
+ rtw_regd_init_dfs_region(rtwdev, rtwdev->regd.region);
+ rtw_phy_adaptivity_set_mode(rtwdev);
+ if (chip->ops->adaptivity_init)
+ chip->ops->adaptivity_init(rtwdev);
+}
+
void rtw_phy_init(struct rtw_dev *rtwdev)
{
struct rtw_chip_info *chip = rtwdev->chip;
@@ -134,6 +186,7 @@ void rtw_phy_init(struct rtw_dev *rtwdev)
mask = chip->dig[0].mask;
dm_info->igi_history[0] = rtw_read32_mask(rtwdev, addr, mask);
rtw_phy_cck_pd_init(rtwdev);
+ rtw_phy_adaptivity_init(rtwdev);
}
void rtw_phy_dig_write(struct rtw_dev *rtwdev, u8 igi)
@@ -543,6 +596,12 @@ static void rtw_phy_pwr_track(struct rtw_dev *rtwdev)
rtwdev->chip->ops->pwr_track(rtwdev);
}
+static void rtw_phy_adaptivity(struct rtw_dev *rtwdev)
+{
+ if (rtwdev->chip->ops->adaptivity)
+ rtwdev->chip->ops->adaptivity(rtwdev);
+}
+
void rtw_phy_dynamic_mechanism(struct rtw_dev *rtwdev)
{
/* for further calculation */
@@ -552,6 +611,7 @@ void rtw_phy_dynamic_mechanism(struct rtw_dev *rtwdev)
rtw_phy_ra_info_update(rtwdev);
rtw_phy_dpk_track(rtwdev);
rtw_phy_pwr_track(rtwdev);
+ rtw_phy_adaptivity(rtwdev);
}
#define FRAC_BITS 3
diff --git a/drivers/net/wireless/realtek/rtw88/phy.h b/drivers/net/wireless/realtek/rtw88/phy.h
index af916d8784cd..ca7af828b5a7 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.h
+++ b/drivers/net/wireless/realtek/rtw88/phy.h
@@ -56,6 +56,8 @@ s8 rtw_phy_pwrtrack_get_pwridx(struct rtw_dev *rtwdev,
bool rtw_phy_pwrtrack_need_iqk(struct rtw_dev *rtwdev);
void rtw_phy_config_swing_table(struct rtw_dev *rtwdev,
struct rtw_swing_table *swing_table);
+void rtw_phy_set_edcca_th(struct rtw_dev *rtwdev, u8 l2h, u8 h2l);
+void rtw_phy_adaptivity_set_mode(struct rtw_dev *rtwdev);
struct rtw_txpwr_lmt_cfg_pair {
u8 regd;
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index 9d94534c9674..b8c6601e5123 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -265,9 +265,11 @@
#define BIT_SHIFT_SIFS_OFDM_TRX 24
#define REG_SLOT 0x051B
#define REG_TX_PTCL_CTRL 0x0520
+#define BIT_DIS_EDCCA BIT(15)
#define BIT_SIFS_BK_EN BIT(12)
#define REG_TXPAUSE 0x0522
#define REG_RD_CTRL 0x0524
+#define BIT_EDCCA_MSK_CNTDOWN_EN BIT(11)
#define BIT_DIS_TXOP_CFE BIT(10)
#define BIT_DIS_LSIG_CFE BIT(9)
#define BIT_DIS_STBC_CFE BIT(8)
diff --git a/drivers/net/wireless/realtek/rtw88/regd.c b/drivers/net/wireless/realtek/rtw88/regd.c
index 27a7fe8395f4..f57ef0ad7e9a 100644
--- a/drivers/net/wireless/realtek/rtw88/regd.c
+++ b/drivers/net/wireless/realtek/rtw88/regd.c
@@ -358,6 +358,22 @@ static bool rtw_regd_is_ww(struct rtw_regulatory *reg)
return false;
}
+void rtw_regd_init_dfs_region(struct rtw_dev *rtwdev,
+ enum nl80211_dfs_regions curr_region)
+{
+ struct ieee80211_hw *hw = rtwdev->hw;
+ const struct ieee80211_regdomain *wiphy_regd = NULL;
+
+ if (curr_region != RTW_REGION_INVALID)
+ return;
+
+ rcu_read_lock();
+ wiphy_regd = rcu_dereference(hw->wiphy->regd);
+ if (wiphy_regd)
+ rtwdev->regd.region = wiphy_regd->dfs_region;
+ rcu_read_unlock();
+}
+
static int rtw_regd_notifier_apply(struct rtw_dev *rtwdev,
struct wiphy *wiphy,
struct regulatory_request *request)
@@ -374,10 +390,13 @@ static int rtw_regd_notifier_apply(struct rtw_dev *rtwdev,
!rtwdev->efuse.country_worldwide) {
rtwdev->regd =
rtw_regd_find_reg_by_name(rtwdev->efuse.country_code);
+ /* return to the efuse setting */
+ rtw_regd_init_dfs_region(rtwdev, RTW_REGION_INVALID);
return 0;
}
rtwdev->regd = rtw_regd_find_reg_by_name(request->alpha2);
rtw_regd_apply_world_flags(wiphy, request->initiator);
+ rtwdev->regd.region = request->dfs_region;
return 0;
}
@@ -416,6 +435,7 @@ int rtw_regd_init(struct rtw_dev *rtwdev,
rtwdev->regd = rtw_regd_find_reg_by_name(rtwdev->efuse.country_code);
rtw_regd_init_wiphy(rtwdev, wiphy, reg_notifier);
+ rtwdev->regd.region = RTW_REGION_INVALID;
return 0;
}
@@ -439,5 +459,7 @@ void rtw_regd_notifier(struct wiphy *wiphy, struct regulatory_request *request)
request->initiator, rtwdev->regd.chplan,
rtwdev->regd.txpwr_regd);
+ rtw_phy_adaptivity_set_mode(rtwdev);
+
rtw_phy_set_tx_power_level(rtwdev, hal->current_channel);
}
diff --git a/drivers/net/wireless/realtek/rtw88/regd.h b/drivers/net/wireless/realtek/rtw88/regd.h
index 5d4578331788..b50d5fb9545a 100644
--- a/drivers/net/wireless/realtek/rtw88/regd.h
+++ b/drivers/net/wireless/realtek/rtw88/regd.h
@@ -68,4 +68,6 @@ int rtw_regd_init(struct rtw_dev *rtwdev,
void (*reg_notifier)(struct wiphy *wiphy,
struct regulatory_request *request));
void rtw_regd_notifier(struct wiphy *wiphy, struct regulatory_request *request);
+void rtw_regd_init_dfs_region(struct rtw_dev *rtwdev,
+ enum nl80211_dfs_regions curr_region);
#endif
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
index 4dd7d4143b04..5b21f9fa859b 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
@@ -1543,6 +1543,37 @@ static void rtw8822b_bf_config_bfee(struct rtw_dev *rtwdev, struct rtw_vif *vif,
rtw_warn(rtwdev, "wrong bfee role\n");
}
+static void rtw8822b_adaptivity_init(struct rtw_dev *rtwdev)
+{
+ rtw_phy_set_edcca_th(rtwdev, 0x7f, 0x7f);
+ /* mac edcca state setting */
+ rtw_write32_mask(rtwdev, REG_TX_PTCL_CTRL, BIT_DIS_EDCCA, 0);
+ rtw_write32_mask(rtwdev, REG_RD_CTRL, BIT_EDCCA_MSK_CNTDOWN_EN, 1);
+
+ rtw_write32_mask(rtwdev, REG_EDCCA_SOURCE, BIT_SOURCE_OPTION, 1);
+ rtw_write32_mask(rtwdev, REG_EDCCA_POW_MA, BIT_MA_LEVEL, 0);
+ /* edcca decistion opt */
+ rtw_write32_mask(rtwdev, REG_EDCCA_DECISION, BIT_EDCCA_OPTION, 1);
+}
+
+static void rtw8822b_adaptivity(struct rtw_dev *rtwdev)
+{
+ struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+ s8 l2h, h2l;
+ u8 igi;
+
+ igi = dm_info->igi_history[0];
+ if (dm_info->edcca_mode == RTW_EDCCA_NORMAL) {
+ l2h = max_t(s8, igi + EDCCA_IGI_L2H_DIFF, EDCCA_TH_L2H_LB);
+ h2l = l2h - EDCCA_L2H_H2L_DIFF_NORMAL;
+ } else {
+ l2h = min_t(s8, igi, dm_info->l2h_th_ini);
+ h2l = l2h - EDCCA_L2H_H2L_DIFF;
+ }
+
+ rtw_phy_set_edcca_th(rtwdev, l2h, h2l);
+}
+
static const struct rtw_pwr_seq_cmd trans_carddis_to_cardemu_8822b[] = {
{0x0086,
RTW_PWR_CUT_ALL_MSK,
@@ -2094,6 +2125,8 @@ static struct rtw_chip_ops rtw8822b_ops = {
.config_bfee = rtw8822b_bf_config_bfee,
.set_gid_table = rtw_bf_set_gid_table,
.cfg_csi_rate = rtw_bf_cfg_csi_rate,
+ .adaptivity_init = rtw8822b_adaptivity_init,
+ .adaptivity = rtw8822b_adaptivity,
.coex_set_init = rtw8822b_coex_cfg_init,
.coex_set_ant_switch = rtw8822b_coex_cfg_ant_switch,
@@ -2398,6 +2431,11 @@ static const struct rtw_reg_domain coex_info_hw_regs_8822b[] = {
{0xc50, MASKBYTE0, RTW_REG_DOMAIN_MAC8},
};
+static struct rtw_hw_reg_offset rtw8822b_edcca_th[] = {
+ [EDCCA_TH_L2H_IDX] = {{.addr = 0x8a4, .mask = MASKBYTE0}, .offset = 0},
+ [EDCCA_TH_H2L_IDX] = {{.addr = 0x8a4, .mask = MASKBYTE1}, .offset = 0},
+};
+
struct rtw_chip_info rtw8822b_hw_spec = {
.ops = &rtw8822b_ops,
.id = RTW_CHIP_TYPE_8822B,
@@ -2440,6 +2478,9 @@ struct rtw_chip_info rtw8822b_hw_spec = {
.iqk_threshold = 8,
.bfer_su_max_num = 2,
.bfer_mu_max_num = 1,
+ .edcca_th = rtw8822b_edcca_th,
+ .l2h_th_ini_cs = 10 + EDCCA_IGI_BASE,
+ .l2h_th_ini_ad = -14 + EDCCA_IGI_BASE,
.coex_para_ver = 0x19062706,
.bt_desired_ver = 0x6,
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.h b/drivers/net/wireless/realtek/rtw88/rtw8822b.h
index 6211f4b547b9..f2518356a464 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.h
@@ -152,11 +152,17 @@ _rtw_write32s_mask(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 data)
#define REG_L1PKWT 0x840
#define REG_MRC 0x850
#define REG_CLKTRK 0x860
+#define REG_EDCCA_POW_MA 0x8a0
+#define BIT_MA_LEVEL GENMASK(1, 0)
#define REG_ADCCLK 0x8ac
#define REG_ADC160 0x8c4
#define REG_ADC40 0x8c8
+#define REG_EDCCA_DECISION 0x8dc
+#define BIT_EDCCA_OPTION BIT(5)
#define REG_CDDTXP 0x93c
#define REG_TXPSEL1 0x940
+#define REG_EDCCA_SOURCE 0x944
+#define BIT_SOURCE_OPTION GENMASK(29, 28)
#define REG_ACBB0 0x948
#define REG_ACBBRXFIR 0x94c
#define REG_ACGG2TBL 0x958
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index dc07e6be38e8..c269df7ed856 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -3414,6 +3414,37 @@ static void rtw8822c_pwr_track(struct rtw_dev *rtwdev)
dm_info->pwr_trk_triggered = false;
}
+static void rtw8822c_adaptivity_init(struct rtw_dev *rtwdev)
+{
+ rtw_phy_set_edcca_th(rtwdev, 0x7f, 0x7f);
+ /* mac edcca state setting */
+ rtw_write32_mask(rtwdev, REG_TX_PTCL_CTRL, BIT_DIS_EDCCA, 0);
+ rtw_write32_mask(rtwdev, REG_RD_CTRL, BIT_EDCCA_MSK_CNTDOWN_EN, 1);
+ /* edcca decistion opt */
+ rtw_write32_mask(rtwdev, REG_EDCCA_DECISION, BIT_EDCCA_OPTION, 0);
+}
+
+static void rtw8822c_adaptivity(struct rtw_dev *rtwdev)
+{
+ struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+ s8 l2h, h2l;
+ u8 igi;
+
+ igi = dm_info->igi_history[0];
+ if (dm_info->edcca_mode == RTW_EDCCA_NORMAL) {
+ l2h = max_t(s8, igi + EDCCA_IGI_L2H_DIFF, EDCCA_TH_L2H_LB);
+ h2l = l2h - EDCCA_L2H_H2L_DIFF_NORMAL;
+ } else {
+ if (igi < dm_info->l2h_th_ini - EDCCA_ADC_BACKOFF)
+ l2h = igi + EDCCA_ADC_BACKOFF;
+ else
+ l2h = dm_info->l2h_th_ini;
+ h2l = l2h - EDCCA_L2H_H2L_DIFF;
+ }
+
+ rtw_phy_set_edcca_th(rtwdev, l2h, h2l);
+}
+
static const struct rtw_pwr_seq_cmd trans_carddis_to_cardemu_8822c[] = {
{0x0086,
RTW_PWR_CUT_ALL_MSK,
@@ -3803,6 +3834,8 @@ static struct rtw_chip_ops rtw8822c_ops = {
.config_bfee = rtw8822c_bf_config_bfee,
.set_gid_table = rtw_bf_set_gid_table,
.cfg_csi_rate = rtw_bf_cfg_csi_rate,
+ .adaptivity_init = rtw8822c_adaptivity_init,
+ .adaptivity = rtw8822c_adaptivity,
.coex_set_init = rtw8822c_coex_cfg_init,
.coex_set_ant_switch = NULL,
@@ -4080,6 +4113,15 @@ static const struct rtw_pwr_track_tbl rtw8822c_rtw_pwr_track_tbl = {
.pwrtrk_2g_ccka_p = rtw8822c_pwrtrk_2g_cck_a_p,
};
+static struct rtw_hw_reg_offset rtw8822c_edcca_th[] = {
+ [EDCCA_TH_L2H_IDX] = {
+ {.addr = 0x84c, .mask = MASKBYTE2}, .offset = 0x80
+ },
+ [EDCCA_TH_H2L_IDX] = {
+ {.addr = 0x84c, .mask = MASKBYTE3}, .offset = 0x80
+ },
+};
+
#ifdef CONFIG_PM
static const struct wiphy_wowlan_support rtw_wowlan_stub_8822c = {
.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_GTK_REKEY_FAILURE |
@@ -4162,6 +4204,9 @@ struct rtw_chip_info rtw8822c_hw_spec = {
.iqk_threshold = 8,
.bfer_su_max_num = 2,
.bfer_mu_max_num = 1,
+ .edcca_th = rtw8822c_edcca_th,
+ .l2h_th_ini_cs = 60,
+ .l2h_th_ini_ad = 45,
#ifdef CONFIG_PM
.wow_fw_name = "rtw88/rtw8822c_wow_fw.bin",
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.h b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
index dfd8662a0c0e..953fb19fad7e 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.h
@@ -171,6 +171,8 @@ const struct rtw_table name ## _tbl = { \
#define REG_DFIRBW 0x810
#define REG_ANTMAP0 0x820
#define REG_ANTMAP 0x824
+#define REG_EDCCA_DECISION 0x844
+#define BIT_EDCCA_OPTION GENMASK(30, 29)
#define REG_DYMPRITH 0x86c
#define REG_DYMENTH0 0x870
#define REG_DYMENTH 0x874
--
2.17.1
On Fri, Mar 27, 2020 at 12:52 AM <[email protected]> wrote:
> v3 -> v4
> * squashed with "rtw88: support dynamic user regulatory setting"
> * modify the commit log
>
> v4 -> v5
> * no change
>
> v5 -> v6
> * remove custom world-wide, use stack world-wide
> * surface error codes
>
> v6 -> v7
> * restore custom world-wide
> * modify commit message to be more clear
If it wasn't clear, v7 looks more like v5. I think I had some of my
own misunderstanding of the regulatory core when
reading/reviewing/testing v5, which resulted in ill-conceived changes
in v6. I think I've gotten my head around this, and this looks fine to
me. But that's not saying much, given how confused I was at times.
Reviewed-by: Brian Norris <[email protected]>