From: Luca Coelho <[email protected]>
Hi,
A bunch of patches with mac80211 and cfg80211 changes from our
internal tree.
Please review, though you have already reviewed most if not all of
them ;)
Cheers,
Luca.
Andrei Otcheretianski (1):
mac80211: Don't destroy auth data in case of anti-clogging
Ilan Peer (4):
cfg80211: Parse HE membership selector
mac80211: Skip entries with HE membership selector
mac80211: Fail association when AP has no legacy rates
cfg80211: Do not warn on same channel at the end of CSA
Johannes Berg (4):
mac80211: implement Operating Mode Notification extended NSS support
mac80211: minstrel_ht_assign_best_tp_rates: remove redundant test
mac80211_hwsim: indicate in IBSS that we have transmitted beacons
mac80211: drop data frames without key on encrypted links
Mordechay Goodstein (2):
mac80211: agg-tx: refactor sending addba
mac80211: agg-tx: add an option to defer ADDBA transmit
Shaul Triebitz (1):
mac80211: add twt_protected flag to the bss_conf structure
drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 6 +-
drivers/net/wireless/mac80211_hwsim.c | 6 ++
include/linux/ieee80211.h | 13 +++-
include/net/cfg80211.h | 3 +-
include/net/mac80211.h | 8 ++-
net/mac80211/agg-tx.c | 79 +++++++++++++--------
net/mac80211/debugfs_sta.c | 3 +-
net/mac80211/key.c | 20 +++---
net/mac80211/mlme.c | 33 +++++++--
net/mac80211/rc80211_minstrel_ht.c | 3 +-
net/mac80211/sta_info.h | 3 +
net/mac80211/tx.c | 12 +++-
net/mac80211/vht.c | 10 ++-
net/wireless/nl80211.c | 2 +
net/wireless/scan.c | 6 +-
net/wireless/util.c | 26 +++----
16 files changed, 163 insertions(+), 70 deletions(-)
--
2.25.1
From: Andrei Otcheretianski <[email protected]>
SAE AP may reject authentication with WLAN_STATUS_ANTI_CLOG_REQUIRED.
As the user space will immediately continue the authentication flow,
there is no need to destroy the authentication data in this case.
This saves unneeded station removal and releasing the channel.
Change-Id: I8040a842874aaf6d209df3fc8a2acb97a0bf508b
Signed-off-by: Andrei Otcheretianski <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
net/mac80211/mlme.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index f1f518790c12..a0de21a51f65 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2948,10 +2948,15 @@ static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
}
if (status_code != WLAN_STATUS_SUCCESS) {
+ cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
+
+ if (auth_alg == WLAN_AUTH_SAE &&
+ status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED)
+ return;
+
sdata_info(sdata, "%pM denied authentication (status %d)\n",
mgmt->sa, status_code);
ieee80211_destroy_auth_data(sdata, false);
- cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
event.u.mlme.status = MLME_DENIED;
event.u.mlme.reason = status_code;
drv_event_callback(sdata->local, sdata, &event);
--
2.25.1
From: Ilan Peer <[email protected]>
When parsing supported rates IE.
Change-Id: I93aad0e5ddb7ce79f05f8153922acb9aa5076d38
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
net/mac80211/mlme.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index a0de21a51f65..04ed883339c7 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3154,15 +3154,16 @@ static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
*have_higher_than_11mbit = true;
/*
- * Skip HT and VHT BSS membership selectors since they're not
- * rates.
+ * Skip HT, VHT and HE BSS membership selectors since they're
+ * not rates.
*
* Note: Even though the membership selector and the basic
* rate flag share the same bit, they are not exactly
* the same.
*/
if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
- supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY))
+ supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) ||
+ supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY))
continue;
for (j = 0; j < sband->n_bitrates; j++) {
--
2.25.1
From: Ilan Peer <[email protected]>
This extends the support for drivers that rebuilds IEs in the
FW (same as with HT/VHT).
Change-Id: I886252639604c8e3e84b8ef97962f1b0e4beec81
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
include/linux/ieee80211.h | 1 +
include/net/cfg80211.h | 3 ++-
net/wireless/nl80211.c | 2 ++
3 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index bdcc3165c440..7c7b974c41b1 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1067,6 +1067,7 @@ struct ieee80211_mgmt {
/* Supported rates membership selectors */
#define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127
#define BSS_MEMBERSHIP_SELECTOR_VHT_PHY 126
+#define BSS_MEMBERSHIP_SELECTOR_HE_PHY 122
/* mgmt header + 1 byte category code */
#define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index c78bd4ff9e33..18e17496a904 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1052,6 +1052,7 @@ enum cfg80211_ap_settings_flags {
* @ht_required: stations must support HT
* @vht_required: stations must support VHT
* @twt_responder: Enable Target Wait Time
+ * @he_required: stations must support HE
* @flags: flags, as defined in enum cfg80211_ap_settings_flags
* @he_obss_pd: OBSS Packet Detection settings
* @he_bss_color: BSS Color settings
@@ -1081,7 +1082,7 @@ struct cfg80211_ap_settings {
const struct ieee80211_vht_cap *vht_cap;
const struct ieee80211_he_cap_elem *he_cap;
const struct ieee80211_he_operation *he_oper;
- bool ht_required, vht_required;
+ bool ht_required, vht_required, he_required;
bool twt_responder;
u32 flags;
struct ieee80211_he_obss_pd he_obss_pd;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ad87e9db9a91..0586093420e8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4728,6 +4728,8 @@ static void nl80211_check_ap_rate_selectors(struct cfg80211_ap_settings *params,
params->ht_required = true;
if (rates[2 + i] == BSS_MEMBERSHIP_SELECTOR_VHT_PHY)
params->vht_required = true;
+ if (rates[2 + i] == BSS_MEMBERSHIP_SELECTOR_HE_PHY)
+ params->he_required = true;
}
}
--
2.25.1
From: Johannes Berg <[email protected]>
Somehow we missed this for a long time, but similar to the extended
NSS support in VHT capabilities, we need to have this in Operating
Mode notification.
Implement it by
* parsing the 160/80+80 bit there and setting the bandwidth
appropriately
* having callers of ieee80211_get_vht_max_nss() pass in the current
max NSS value as received in the operating mode notification in
order to modify it appropriately depending on the extended NSS
bits.
This updates all drivers that use it, i.e. only iwlwifi/mvm.
Change-Id: I4e8c25d3288441759c2793247197229f0696a37d
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 6 ++---
include/linux/ieee80211.h | 12 +++++++---
net/mac80211/vht.c | 10 ++++++--
net/wireless/util.c | 26 +++++++++++----------
4 files changed, 34 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
index 1a990ed9c3ca..af1baebe11a7 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
@@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/******************************************************************************
*
- * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2005 - 2014, 2018 - 2020 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright(c) 2018 - 2019 Intel Corporation
*
* Contact Information:
* Intel Linux Wireless <[email protected]>
@@ -1430,7 +1429,8 @@ static u32 rs_bw_from_sta_bw(struct ieee80211_sta *sta)
*/
if (ieee80211_get_vht_max_nss(&vht_cap,
IEEE80211_VHT_CHANWIDTH_160MHZ,
- 0, true) < sta->rx_nss)
+ 0, true,
+ sta->rx_nss) < sta->rx_nss)
return RATE_MCS_CHAN_WIDTH_80;
return RATE_MCS_CHAN_WIDTH_160;
case IEEE80211_STA_RX_BW_80:
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 33d907eec0b6..bdcc3165c440 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -9,7 +9,7 @@
* Copyright (c) 2006, Michael Wu <[email protected]>
* Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright (c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright (c) 2018 - 2019 Intel Corporation
+ * Copyright (c) 2018 - 2020 Intel Corporation
*/
#ifndef LINUX_IEEE80211_H
@@ -859,6 +859,7 @@ enum ieee80211_ht_chanwidth_values {
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width
+ * @IEEE80211_OPMODE_NOTIF_BW_160_80P80: 160 / 80+80 MHz indicator flag
* @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask
* (the NSS value is the value of this field + 1)
* @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift
@@ -866,11 +867,12 @@ enum ieee80211_ht_chanwidth_values {
* using a beamforming steering matrix
*/
enum ieee80211_vht_opmode_bits {
- IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 3,
+ IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 0x03,
IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ = 0,
IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ = 1,
IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ = 2,
IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ = 3,
+ IEEE80211_OPMODE_NOTIF_BW_160_80P80 = 0x04,
IEEE80211_OPMODE_NOTIF_RX_NSS_MASK = 0x70,
IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT = 4,
IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80,
@@ -1731,6 +1733,9 @@ struct ieee80211_mu_edca_param_set {
* @ext_nss_bw_capable: indicates whether or not the local transmitter
* (rate scaling algorithm) can deal with the new logic
* (dot11VHTExtendedNSSBWCapable)
+ * @max_vht_nss: current maximum NSS as advertised by the STA in
+ * operating mode notification, can be 0 in which case the
+ * capability data will be used to derive this (from MCS support)
*
* Due to the VHT Extended NSS Bandwidth Support, the maximum NSS can
* vary for a given BW/MCS. This function parses the data.
@@ -1739,7 +1744,8 @@ struct ieee80211_mu_edca_param_set {
*/
int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
enum ieee80211_vht_chanwidth bw,
- int mcs, bool ext_nss_bw_capable);
+ int mcs, bool ext_nss_bw_capable,
+ unsigned int max_vht_nss);
/* 802.11ax HE MAC capabilities */
#define IEEE80211_HE_MAC_CAP0_HTC_HE 0x01
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index 632f07401850..9c6045f9c24d 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -4,7 +4,7 @@
*
* Portions of this file
* Copyright(c) 2015 - 2016 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2019 Intel Corporation
+ * Copyright (C) 2018 - 2020 Intel Corporation
*/
#include <linux/ieee80211.h>
@@ -575,15 +575,21 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) {
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ:
+ /* ignore IEEE80211_OPMODE_NOTIF_BW_160_80P80 must not be set */
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20;
break;
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ:
+ /* ignore IEEE80211_OPMODE_NOTIF_BW_160_80P80 must not be set */
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40;
break;
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ:
- sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80;
+ if (opmode & IEEE80211_OPMODE_NOTIF_BW_160_80P80)
+ sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160;
+ else
+ sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80;
break;
case IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ:
+ /* legacy only, no longer used by newer spec */
sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160;
break;
}
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 6590efbbcbb9..123d6ce79b8e 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -5,7 +5,7 @@
* Copyright 2007-2009 Johannes Berg <[email protected]>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright 2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2019 Intel Corporation
+ * Copyright (C) 2018-2020 Intel Corporation
*/
#include <linux/export.h>
#include <linux/bitops.h>
@@ -2030,10 +2030,10 @@ EXPORT_SYMBOL(cfg80211_send_layer2_update);
int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
enum ieee80211_vht_chanwidth bw,
- int mcs, bool ext_nss_bw_capable)
+ int mcs, bool ext_nss_bw_capable,
+ unsigned int max_vht_nss)
{
u16 map = le16_to_cpu(cap->supp_mcs.rx_mcs_map);
- int max_vht_nss = 0;
int ext_nss_bw;
int supp_width;
int i, mcs_encoding;
@@ -2041,7 +2041,7 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
if (map == 0xffff)
return 0;
- if (WARN_ON(mcs > 9))
+ if (WARN_ON(mcs > 9 || max_vht_nss > 8))
return 0;
if (mcs <= 7)
mcs_encoding = 0;
@@ -2050,16 +2050,18 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
else
mcs_encoding = 2;
- /* find max_vht_nss for the given MCS */
- for (i = 7; i >= 0; i--) {
- int supp = (map >> (2 * i)) & 3;
+ if (!max_vht_nss) {
+ /* find max_vht_nss for the given MCS */
+ for (i = 7; i >= 0; i--) {
+ int supp = (map >> (2 * i)) & 3;
- if (supp == 3)
- continue;
+ if (supp == 3)
+ continue;
- if (supp >= mcs_encoding) {
- max_vht_nss = i + 1;
- break;
+ if (supp >= mcs_encoding) {
+ max_vht_nss = i + 1;
+ break;
+ }
}
}
--
2.25.1
From: Mordechay Goodstein <[email protected]>
We move the actual arming the timer and sending ADDBA to a function
for the use in different places calling the same logic.
Change-Id: I75934e6464535fbf43969acc796bc886291e79a5
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
net/mac80211/agg-tx.c | 67 +++++++++++++++++++++++++------------------
1 file changed, 39 insertions(+), 28 deletions(-)
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 33da6f738c99..32f40c4f3120 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -9,7 +9,7 @@
* Copyright 2007, Michael Wu <[email protected]>
* Copyright 2007-2010, Intel Corporation
* Copyright(c) 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2019 Intel Corporation
+ * Copyright (C) 2018 - 2020 Intel Corporation
*/
#include <linux/ieee80211.h>
@@ -448,6 +448,43 @@ static void sta_addba_resp_timer_expired(struct timer_list *t)
ieee80211_stop_tx_ba_session(&sta->sta, tid);
}
+static void ieee80211_send_addba_with_timeout(struct sta_info *sta,
+ struct tid_ampdu_tx *tid_tx)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ struct ieee80211_local *local = sta->local;
+ u8 tid = tid_tx->tid;
+ u16 buf_size;
+
+ /* activate the timer for the recipient's addBA response */
+ mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
+ ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
+ sta->sta.addr, tid);
+
+ spin_lock_bh(&sta->lock);
+ sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
+ sta->ampdu_mlme.addba_req_num[tid]++;
+ spin_unlock_bh(&sta->lock);
+
+ if (sta->sta.he_cap.has_he) {
+ buf_size = local->hw.max_tx_aggregation_subframes;
+ } else {
+ /*
+ * We really should use what the driver told us it will
+ * transmit as the maximum, but certain APs (e.g. the
+ * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
+ * will crash when we use a lower number.
+ */
+ buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
+ }
+
+ /* send AddBA request */
+ ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
+ tid_tx->dialog_token,
+ sta->tid_seq[tid] >> 4,
+ buf_size, tid_tx->timeout);
+}
+
void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
{
struct tid_ampdu_tx *tid_tx;
@@ -462,7 +499,6 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
.timeout = 0,
};
int ret;
- u16 buf_size;
tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
@@ -508,32 +544,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
return;
}
- /* activate the timer for the recipient's addBA response */
- mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
- ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
- sta->sta.addr, tid);
-
- spin_lock_bh(&sta->lock);
- sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
- sta->ampdu_mlme.addba_req_num[tid]++;
- spin_unlock_bh(&sta->lock);
-
- if (sta->sta.he_cap.has_he) {
- buf_size = local->hw.max_tx_aggregation_subframes;
- } else {
- /*
- * We really should use what the driver told us it will
- * transmit as the maximum, but certain APs (e.g. the
- * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
- * will crash when we use a lower number.
- */
- buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
- }
-
- /* send AddBA request */
- ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
- tid_tx->dialog_token, params.ssn,
- buf_size, tid_tx->timeout);
+ ieee80211_send_addba_with_timeout(sta, tid_tx);
}
/*
--
2.25.1
From: Mordechay Goodstein <[email protected]>
Driver tells mac80211 to sends ADDBA with SSN (starting sequence number)
from the head of the queue, while the transmission of all the frames in the
queue may take a while, which causes the peer to time out. In order to
fix this scenario, add an option to defer ADDBA transmit until queue
is drained.
Change-Id: If67daab123a27c1cbddef000d6a3f212aa6309ef
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
include/net/mac80211.h | 6 +++++-
net/mac80211/agg-tx.c | 12 +++++++++++-
net/mac80211/sta_info.h | 2 ++
3 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f2b0a7795d0a..bcf706798e52 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3119,7 +3119,10 @@ enum ieee80211_filter_flags {
* @IEEE80211_AMPDU_RX_START: start RX aggregation
* @IEEE80211_AMPDU_RX_STOP: stop RX aggregation
* @IEEE80211_AMPDU_TX_START: start TX aggregation, the driver must either
- * call ieee80211_start_tx_ba_cb_irqsafe() or return the special
+ * call ieee80211_start_tx_ba_cb_irqsafe() or
+ * call ieee80211_start_tx_ba_cb_irqsafe() with status
+ * %IEEE80211_AMPDU_TX_START_DELAY_ADDBA to delay addba after
+ * ieee80211_start_tx_ba_cb_irqsafe is called, or just return the special
* status %IEEE80211_AMPDU_TX_START_IMMEDIATE.
* @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational
* @IEEE80211_AMPDU_TX_STOP_CONT: stop TX aggregation but continue transmitting
@@ -3145,6 +3148,7 @@ enum ieee80211_ampdu_mlme_action {
};
#define IEEE80211_AMPDU_TX_START_IMMEDIATE 1
+#define IEEE80211_AMPDU_TX_START_DELAY_ADDBA 2
/**
* struct ieee80211_ampdu_params - AMPDU action parameters
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 32f40c4f3120..c2d5f512526d 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -483,6 +483,8 @@ static void ieee80211_send_addba_with_timeout(struct sta_info *sta,
tid_tx->dialog_token,
sta->tid_seq[tid] >> 4,
buf_size, tid_tx->timeout);
+
+ WARN_ON(test_and_set_bit(HT_AGG_STATE_SENT_ADDBA, &tid_tx->state));
}
void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
@@ -521,7 +523,9 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
params.ssn = sta->tid_seq[tid] >> 4;
ret = drv_ampdu_action(local, sdata, ¶ms);
- if (ret == IEEE80211_AMPDU_TX_START_IMMEDIATE) {
+ if (ret == IEEE80211_AMPDU_TX_START_DELAY_ADDBA) {
+ return;
+ } else if (ret == IEEE80211_AMPDU_TX_START_IMMEDIATE) {
/*
* We didn't send the request yet, so don't need to check
* here if we already got a response, just mark as driver
@@ -765,6 +769,12 @@ void ieee80211_start_tx_ba_cb(struct sta_info *sta, int tid,
if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
return;
+ if (!test_bit(HT_AGG_STATE_SENT_ADDBA, &tid_tx->state)) {
+ ieee80211_send_addba_with_timeout(sta, tid_tx);
+ /* RESPONSE_RECEIVED state whould trigger the flow again */
+ return;
+ }
+
if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
ieee80211_agg_tx_operational(local, sta, tid);
}
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 364a35414d05..78ab18eee1ec 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -3,6 +3,7 @@
* Copyright 2002-2005, Devicescape Software, Inc.
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright(c) 2015-2017 Intel Deutschland GmbH
+ * Copyright(c) 2020 Intel Corporation
*/
#ifndef STA_INFO_H
@@ -115,6 +116,7 @@ enum ieee80211_sta_info_flags {
#define HT_AGG_STATE_WANT_STOP 5
#define HT_AGG_STATE_START_CB 6
#define HT_AGG_STATE_STOP_CB 7
+#define HT_AGG_STATE_SENT_ADDBA 8
DECLARE_EWMA(avg_signal, 10, 8)
enum ieee80211_agg_stop_reason {
--
2.25.1
From: Ilan Peer <[email protected]>
When cfg80211_update_assoc_bss_entry() is called, there is a
verification that the BSS channel actually changed. As some APs use
CSA also for bandwidth changes, this would result with a kernel
warning.
Fix this by removing the WARN_ON().
Change-Id: I6710376b1b4257e5f4712fc7ab16e2b638d512aa
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
net/wireless/scan.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index dd41e41f9d26..4000382aef48 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -2019,7 +2019,11 @@ void cfg80211_update_assoc_bss_entry(struct wireless_dev *wdev,
spin_lock_bh(&rdev->bss_lock);
- if (WARN_ON(cbss->pub.channel == chan))
+ /*
+ * Some APs use CSA also for bandwidth changes, i.e., without actually
+ * changing the control channel, so no need to update in such a case.
+ */
+ if (cbss->pub.channel == chan)
goto done;
/* use transmitting bss */
--
2.25.1
From: Johannes Berg <[email protected]>
We know this pointer isn't NULL and in fact dereferenced it before,
remove the redundant test.
Change-Id: Iae9015573d6c350cc1b12a311d6d13d086beec6c
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
net/mac80211/rc80211_minstrel_ht.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 694a31978a04..5547111d22bf 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2010-2013 Felix Fietkau <[email protected]>
+ * Copyright (C) 2019-2020 Intel Corporation
*/
#include <linux/netdevice.h>
#include <linux/types.h>
@@ -490,7 +491,7 @@ minstrel_ht_assign_best_tp_rates(struct minstrel_ht_sta *mi,
tmp_prob = mi->groups[tmp_group].rates[tmp_idx].prob_avg;
tmp_mcs_tp = minstrel_ht_get_tp_avg(mi, tmp_group, tmp_idx, tmp_prob);
- if (tmp_cck_tp_rate && tmp_cck_tp > tmp_mcs_tp) {
+ if (tmp_cck_tp > tmp_mcs_tp) {
for(i = 0; i < MAX_THR_RATES; i++) {
minstrel_ht_sort_best_tp_rates(mi, tmp_cck_tp_rate[i],
tmp_mcs_tp_rate);
--
2.25.1
From: Johannes Berg <[email protected]>
If we know that we have an encrypted link (based on having had
a key configured for TX in the past) then drop all data frames
in the key selection handler if there's no key anymore.
This fixes an issue with mac80211 internal TXQs - there we can
buffer frames for an encrypted link, but then if the key is no
longer there when they're dequeued, the frames are sent without
encryption. This happens if a station is disconnected while the
frames are still on the TXQ.
Detecting that a link should be encrypted based on a first key
having been configured for TX is fine as there are no use cases
for a connection going from with encryption to no encryption.
With extended key IDs, however, there is a case of having a key
configured for only decryption, so we can't just trigger this
behaviour on a key being configured.
Change-Id: I9fb1d911b064262d33e33dfba730cdeef83926ca
Cc: [email protected]
Reported-by: Jouni Malinen <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
net/mac80211/debugfs_sta.c | 3 ++-
net/mac80211/key.c | 20 ++++++++++++--------
net/mac80211/sta_info.h | 1 +
net/mac80211/tx.c | 12 +++++++++---
4 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 266d63819415..829dcad69c2c 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -5,7 +5,7 @@
* Copyright 2007 Johannes Berg <[email protected]>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright(c) 2016 Intel Deutschland GmbH
- * Copyright (C) 2018 - 2019 Intel Corporation
+ * Copyright (C) 2018 - 2020 Intel Corporation
*/
#include <linux/debugfs.h>
@@ -78,6 +78,7 @@ static const char * const sta_flag_names[] = {
FLAG(MPSP_OWNER),
FLAG(MPSP_RECIPIENT),
FLAG(PS_DELIVER),
+ FLAG(USES_ENCRYPTION),
#undef FLAG
};
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 6354491c5a09..8f403c1bb908 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -6,7 +6,7 @@
* Copyright 2007-2008 Johannes Berg <[email protected]>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright 2015-2017 Intel Deutschland GmbH
- * Copyright 2018-2019 Intel Corporation
+ * Copyright 2018-2020 Intel Corporation
*/
#include <linux/if_ether.h>
@@ -277,22 +277,29 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key)
sta ? sta->sta.addr : bcast_addr, ret);
}
-int ieee80211_set_tx_key(struct ieee80211_key *key)
+static int _ieee80211_set_tx_key(struct ieee80211_key *key, bool force)
{
struct sta_info *sta = key->sta;
struct ieee80211_local *local = key->local;
assert_key_lock(local);
+ set_sta_flag(sta, WLAN_STA_USES_ENCRYPTION);
+
sta->ptk_idx = key->conf.keyidx;
- if (!ieee80211_hw_check(&local->hw, AMPDU_KEYBORDER_SUPPORT))
+ if (force || !ieee80211_hw_check(&local->hw, AMPDU_KEYBORDER_SUPPORT))
clear_sta_flag(sta, WLAN_STA_BLOCK_BA);
ieee80211_check_fast_xmit(sta);
return 0;
}
+int ieee80211_set_tx_key(struct ieee80211_key *key)
+{
+ return _ieee80211_set_tx_key(key, false);
+}
+
static void ieee80211_pairwise_rekey(struct ieee80211_key *old,
struct ieee80211_key *new)
{
@@ -481,11 +488,8 @@ static int ieee80211_key_replace(struct ieee80211_sub_if_data *sdata,
if (pairwise) {
rcu_assign_pointer(sta->ptk[idx], new);
if (new &&
- !(new->conf.flags & IEEE80211_KEY_FLAG_NO_AUTO_TX)) {
- sta->ptk_idx = idx;
- clear_sta_flag(sta, WLAN_STA_BLOCK_BA);
- ieee80211_check_fast_xmit(sta);
- }
+ !(new->conf.flags & IEEE80211_KEY_FLAG_NO_AUTO_TX))
+ _ieee80211_set_tx_key(new, true);
} else {
rcu_assign_pointer(sta->gtk[idx], new);
}
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 78ab18eee1ec..a5de3aa6ea42 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -99,6 +99,7 @@ enum ieee80211_sta_info_flags {
WLAN_STA_MPSP_OWNER,
WLAN_STA_MPSP_RECIPIENT,
WLAN_STA_PS_DELIVER,
+ WLAN_STA_USES_ENCRYPTION,
NUM_WLAN_STA_FLAGS,
};
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 49d35936cc9d..637c22a4256f 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -590,10 +590,13 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
- if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT))
+ if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) {
tx->key = NULL;
- else if (tx->sta &&
- (key = rcu_dereference(tx->sta->ptk[tx->sta->ptk_idx])))
+ return TX_CONTINUE;
+ }
+
+ if (tx->sta &&
+ (key = rcu_dereference(tx->sta->ptk[tx->sta->ptk_idx])))
tx->key = key;
else if (ieee80211_is_group_privacy_action(tx->skb) &&
(key = rcu_dereference(tx->sdata->default_multicast_key)))
@@ -654,6 +657,9 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
if (!skip_hw && tx->key &&
tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)
info->control.hw_key = &tx->key->conf;
+ } else if (!ieee80211_is_mgmt(hdr->frame_control) && tx->sta &&
+ test_sta_flag(tx->sta, WLAN_STA_USES_ENCRYPTION)) {
+ return TX_DROP;
}
return TX_CONTINUE;
--
2.25.1
From: Johannes Berg <[email protected]>
This is actually true because there's no functional beacon distribution
and lets us get active scanning working - without it, mac80211 doesn't
respond to probe requests.
Change-Id: Id86fd36e3d88d2a75d6e0c6618fd93ce8fe84065
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
drivers/net/wireless/mac80211_hwsim.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 4d7141d06027..21148c6d24af 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2464,6 +2464,11 @@ static void mac80211_hwsim_get_et_stats(struct ieee80211_hw *hw,
WARN_ON(i != MAC80211_HWSIM_SSTATS_LEN);
}
+static int mac80211_hwsim_tx_last_beacon(struct ieee80211_hw *hw)
+{
+ return 1;
+}
+
#define HWSIM_COMMON_OPS \
.tx = mac80211_hwsim_tx, \
.start = mac80211_hwsim_start, \
@@ -2474,6 +2479,7 @@ static void mac80211_hwsim_get_et_stats(struct ieee80211_hw *hw,
.config = mac80211_hwsim_config, \
.configure_filter = mac80211_hwsim_configure_filter, \
.bss_info_changed = mac80211_hwsim_bss_info_changed, \
+ .tx_last_beacon = mac80211_hwsim_tx_last_beacon, \
.sta_add = mac80211_hwsim_sta_add, \
.sta_remove = mac80211_hwsim_sta_remove, \
.sta_notify = mac80211_hwsim_sta_notify, \
--
2.25.1
From: Ilan Peer <[email protected]>
The MLME logic had a workaround that allowed to continue an
association with an AP even if the AP did not provide any basic
rates in its supported rates in the association response, assuming
that the first (non basic) legacy rate could be used as a basic rate.
However, this did not consider the case where the AP (which is
obviously buggy) did not provide any legacy rate.
Fix this by failing the association, as this can result in
an unexpected failure in the low level driver and FW, e.g., in
rate scale logic etc.
Change-Id: I6e6ce5efda351a8544c0e7bfeee260fe3360d401
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
---
net/mac80211/mlme.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 04ed883339c7..2b57c53ab070 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -5037,8 +5037,16 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
* doesn't happen any more, but keep the workaround so
* in case some *other* APs are buggy in different ways
* we can connect -- with a warning.
+ * Allow this workaround only in case the AP provided at least
+ * one rate.
*/
- if (!basic_rates && min_rate_index >= 0) {
+ if (min_rate_index < 0) {
+ sdata_info(sdata,
+ "No legacy rates in association response\n");
+
+ sta_info_free(local, new_sta);
+ return -EINVAL;
+ } else if (!basic_rates) {
sdata_info(sdata,
"No basic rates, using min rate instead\n");
basic_rates = BIT(min_rate_index);
--
2.25.1
Luca Coelho <[email protected]> writes:
> From: Johannes Berg <[email protected]>
>
> Somehow we missed this for a long time, but similar to the extended
> NSS support in VHT capabilities, we need to have this in Operating
> Mode notification.
>
> Implement it by
> * parsing the 160/80+80 bit there and setting the bandwidth
> appropriately
> * having callers of ieee80211_get_vht_max_nss() pass in the current
> max NSS value as received in the operating mode notification in
> order to modify it appropriately depending on the extended NSS
> bits.
>
> This updates all drivers that use it, i.e. only iwlwifi/mvm.
>
> Change-Id: I4e8c25d3288441759c2793247197229f0696a37d
All patches have Change-Id tag.
--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
On Thu, 2020-03-26 at 14:56 +0200, Kalle Valo wrote:
> Luca Coelho <[email protected]> writes:
>
> > From: Johannes Berg <[email protected]>
> >
> > Somehow we missed this for a long time, but similar to the extended
> > NSS support in VHT capabilities, we need to have this in Operating
> > Mode notification.
> >
> > Implement it by
> > * parsing the 160/80+80 bit there and setting the bandwidth
> > appropriately
> > * having callers of ieee80211_get_vht_max_nss() pass in the current
> > max NSS value as received in the operating mode notification in
> > order to modify it appropriately depending on the extended NSS
> > bits.
> >
> > This updates all drivers that use it, i.e. only iwlwifi/mvm.
> >
> > Change-Id: I4e8c25d3288441759c2793247197229f0696a37d
>
> All patches have Change-Id tag.
Argh, sorry, I didn't install the send-email script to convert them
into a message-id... I'll resend.
--
Luca.
Hi
[This is an automated email]
This commit has been processed because it contains a -stable tag.
The stable tag indicates that it's relevant for the following trees: all
The bot has tested the following trees: v5.5.11, v5.4.27, v4.19.112, v4.14.174, v4.9.217, v4.4.217.
v5.5.11: Build OK!
v5.4.27: Build OK!
v4.19.112: Failed to apply! Possible dependencies:
03512ceb60ae ("ieee80211: remove redundant leading zeroes")
09b4a4faf9d0 ("mac80211: introduce capability flags for VHT EXT NSS support")
0eeb2b674f05 ("mac80211: add an option for station management TXQ")
1c9559734eca ("mac80211: remove unnecessary key condition")
57a3a454f303 ("iwlwifi: split HE capabilities between AP and STA")
62872a9b9a10 ("mac80211: Fix PTK rekey freezes and clear text leak")
77f7ffdc335d ("mac80211: minstrel_ht: add flag to indicate missing/inaccurate tx A-MPDU length")
77ff2c6b4984 ("mac80211: update HE IEs to D3.3")
80aaa9c16415 ("mac80211: Add he_capa debugfs entry")
96fc6efb9ad9 ("mac80211: IEEE 802.11 Extended Key ID support")
add7453ad62f ("wireless: align to draft 11ax D3.0")
adf8ed01e4fd ("mac80211: add an optional TXQ for other PS-buffered frames")
caf56338c22f ("mac80211: indicate support for multiple BSSID")
daa5b83513a7 ("mac80211: update HE operation fields to D3.0")
v4.14.174: Failed to apply! Possible dependencies:
110b32f065f3 ("iwlwifi: mvm: rs: add basic implementation of the new RS API handlers")
1c73acf58bd6 ("iwlwifi: acpi: move ACPI method definitions to acpi.h")
28e9c00fe1f0 ("iwlwifi: remove upper case letters in sku_capa_band_*_enable")
4ae80f6c8d86 ("iwlwifi: support api ver2 of NVM_GET_INFO resp")
4b82455ca51e ("iwlwifi: use flags to denote modifiers for the channel maps")
4c625c564ba2 ("iwlwifi: get rid of fw/nvm.c")
514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
57a3a454f303 ("iwlwifi: split HE capabilities between AP and STA")
77ff2c6b4984 ("mac80211: update HE IEs to D3.3")
813df5cef3bb ("iwlwifi: acpi: add common code to read from ACPI")
8a6171a7b601 ("iwlwifi: fw: add FW APIs for HE")
9c4f7d512740 ("iwlwifi: move all NVM parsing code to the common files")
9f66a397c877 ("iwlwifi: mvm: rs: add ops for the new rate scaling in the FW")
e7a3b8d87910 ("iwlwifi: acpi: move ACPI-related definitions to acpi.h")
v4.9.217: Failed to apply! Possible dependencies:
01796ff2fa6e ("iwlwifi: mvm: always free inactive queue when moving ownership")
0aaece81114e ("iwlwifi: split firmware API from iwl-trans.h")
1ea423b0e047 ("iwlwifi: remove unnecessary dev_cmd_headroom parameter")
310181ec34e2 ("iwlwifi: move to TVQM mode")
5594d80e9bf4 ("iwlwifi: support two phys for a000 devices")
623e7766be90 ("iwlwifi: pcie: introduce split point to a000 devices")
65e254821cee ("iwlwifi: mvm: use firmware station PM notification for AP_LINK_PS")
6b35ff91572f ("iwlwifi: pcie: introduce a000 TX queues management")
727c02dfb848 ("iwlwifi: pcie: cleanup rfkill checks")
77ff2c6b4984 ("mac80211: update HE IEs to D3.3")
8236f7db2724 ("iwlwifi: mvm: assign cab queue to the correct station")
87d0e1af9db3 ("iwlwifi: mvm: separate queue mapping from queue enablement")
bb49701b41de ("iwlwifi: mvm: support a000 SCD queue configuration")
cf90da352a32 ("iwlwifi: mvm: use mvm_disable_queue instead of sharing logic")
d172a5eff629 ("iwlwifi: reorganize firmware API")
df88c08d5c7e ("iwlwifi: mvm: release static queues on bcast release")
eda50cde58de ("iwlwifi: pcie: add context information support")
v4.4.217: Failed to apply! Possible dependencies:
0aaece81114e ("iwlwifi: split firmware API from iwl-trans.h")
13555e8ba2f4 ("iwlwifi: mvm: add 9000-series RX API")
1a616dd2f171 ("iwlwifi: dump prph registers in a common place for all transports")
1e0bbebaae66 ("mac80211: enable starting BA session with custom timeout")
2f89a5d7d377 ("iwlwifi: mvm: move fw-dbg code to separate file")
39bdb17ebb5b ("iwlwifi: update host command messages to new format")
41837ca962ec ("iwlwifi: pcie: allow to pretend to have Tx CSUM for debug")
4707fde5cdef ("iwlwifi: mvm: use build-time assertion for fw trigger ID")
5b88792cd850 ("iwlwifi: move to wide ID for all commands")
6c4fbcbc1c95 ("iwlwifi: add support for 12K Receive Buffers")
77ff2c6b4984 ("mac80211: update HE IEs to D3.3")
92fe83430b89 ("iwlwifi: uninline iwl_trans_send_cmd")
d172a5eff629 ("iwlwifi: reorganize firmware API")
dcbb4746286a ("iwlwifi: trans: support a callback for ASYNC commands")
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
--
Thanks
Sasha
> From: Ilan Peer <[email protected]>
>
> When cfg80211_update_assoc_bss_entry() is called, there is a
> verification that the BSS channel actually changed. As some APs use
> CSA also for bandwidth changes, this would result with a kernel
> warning.
>
> Fix this by removing the WARN_ON().
>
> Change-Id: I6710376b1b4257e5f4712fc7ab16e2b638d512aa
> Signed-off-by: Ilan Peer <[email protected]>
> Signed-off-by: Luca Coelho <[email protected]>
> ---
> net/wireless/scan.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/net/wireless/scan.c b/net/wireless/scan.c
> index dd41e41f9d26..4000382aef48 100644
> --- a/net/wireless/scan.c
> +++ b/net/wireless/scan.c
> @@ -2019,7 +2019,11 @@ void cfg80211_update_assoc_bss_entry(struct wireless_dev *wdev,
>
> spin_lock_bh(&rdev->bss_lock);
>
> - if (WARN_ON(cbss->pub.channel == chan))
> + /*
> + * Some APs use CSA also for bandwidth changes, i.e., without actually
> + * changing the control channel, so no need to update in such a case.
> + */
> + if (cbss->pub.channel == chan)
> goto done;
>
> /* use transmitting bss */
Indeed, that WARN_ON was too harsh here. One more triggering use-case
here was repeater. Thanks for fixing !
Reviewed-by: Sergey Matyukevich <[email protected]>
Regards,
Sergey