This patch series add support for offloading WPA/WPA2-PSK 4-way
handshake and SAE authentication in AP mode.
Changes in v2:
- add a new flag for SAE offload in AP mode.
Chung-Hsien Hsu (4):
nl80211: support 4-way handshake offloading for WPA/WPA2-PSK in AP
mode
brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK in AP
mode
nl80211: support SAE authentication offload in AP mode
brcmfmac: support SAE authentication offload in AP mode
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 49 ++++++++++++++++-
.../broadcom/brcm80211/brcmfmac/cfg80211.h | 14 +++++
.../broadcom/brcm80211/brcmfmac/feature.c | 1 +
.../broadcom/brcm80211/brcmfmac/feature.h | 4 +-
include/uapi/linux/nl80211.h | 55 +++++++++++++------
net/wireless/nl80211.c | 13 +++--
6 files changed, 112 insertions(+), 24 deletions(-)
--
2.25.0
Firmware may have SAE authenticator code built-in. This is detected by
the driver and indicated in the wiphy features flags. User space can use
this flag to determine whether or not to provide the password material
in the nl80211 start AP command to offload the SAE authentication in AP
mode.
Signed-off-by: Chung-Hsien Hsu <[email protected]>
Signed-off-by: Chi-Hsien Lin <[email protected]>
---
Changes in v2:
- use a new flag for SAE offload in AP mode.
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 28 ++++++++++++++++---
.../broadcom/brcm80211/brcmfmac/cfg80211.h | 4 ++-
2 files changed, 27 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 0dc6afa2ee0e..3e6e8479f95c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -56,6 +56,7 @@
#define RSN_AKM_PSK 2 /* Pre-shared Key */
#define RSN_AKM_SHA256_1X 5 /* SHA256, 802.1X */
#define RSN_AKM_SHA256_PSK 6 /* SHA256, Pre-shared Key */
+#define RSN_AKM_SAE 8 /* SAE */
#define RSN_CAP_LEN 2 /* Length of RSN capabilities */
#define RSN_CAP_PTK_REPLAY_CNTR_MASK (BIT(2) | BIT(3))
#define RSN_CAP_MFPR_MASK BIT(6)
@@ -4237,6 +4238,10 @@ brcmf_configure_wpaie(struct brcmf_if *ifp,
brcmf_dbg(TRACE, "RSN_AKM_MFP_1X\n");
wpa_auth |= WPA2_AUTH_1X_SHA256;
break;
+ case RSN_AKM_SAE:
+ brcmf_dbg(TRACE, "RSN_AKM_SAE\n");
+ wpa_auth |= WPA3_AUTH_SAE_PSK;
+ break;
default:
bphy_err(drvr, "Invalid key mgmt info\n");
}
@@ -4254,11 +4259,12 @@ brcmf_configure_wpaie(struct brcmf_if *ifp,
brcmf_dbg(TRACE, "MFP Required\n");
mfp = BRCMF_MFP_REQUIRED;
/* Firmware only supports mfp required in
- * combination with WPA2_AUTH_PSK_SHA256 or
- * WPA2_AUTH_1X_SHA256.
+ * combination with WPA2_AUTH_PSK_SHA256,
+ * WPA2_AUTH_1X_SHA256, or WPA3_AUTH_SAE_PSK.
*/
if (!(wpa_auth & (WPA2_AUTH_PSK_SHA256 |
- WPA2_AUTH_1X_SHA256))) {
+ WPA2_AUTH_1X_SHA256 |
+ WPA3_AUTH_SAE_PSK))) {
err = -EINVAL;
goto exit;
}
@@ -4823,6 +4829,14 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev,
if (err < 0)
goto exit;
}
+ if (crypto->sae_pwd) {
+ brcmf_dbg(INFO, "using SAE offload\n");
+ profile->use_fwauth |= BIT(BRCMF_PROFILE_FWAUTH_SAE);
+ err = brcmf_set_sae_password(ifp, crypto->sae_pwd,
+ crypto->sae_pwd_len);
+ if (err < 0)
+ goto exit;
+ }
if (profile->use_fwauth == 0)
profile->use_fwauth = BIT(BRCMF_PROFILE_FWAUTH_NONE);
@@ -4927,6 +4941,8 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
if (profile->use_fwauth != BIT(BRCMF_PROFILE_FWAUTH_NONE)) {
if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_PSK))
brcmf_set_pmk(ifp, NULL, 0);
+ if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_SAE))
+ brcmf_set_sae_password(ifp, NULL, 0);
profile->use_fwauth = BIT(BRCMF_PROFILE_FWAUTH_NONE);
}
@@ -7078,9 +7094,13 @@ static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_SAE_OFFLOAD);
}
- if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_FWAUTH))
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_FWAUTH)) {
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK);
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SAE))
+ wiphy_ext_feature_set(wiphy,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD_AP);
+ }
wiphy->mgmt_stypes = brcmf_txrx_stypes;
wiphy->max_remain_on_channel_duration = 5000;
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) {
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
index bf86e0ca941e..17817cdb5de2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h
@@ -133,10 +133,12 @@ enum brcmf_profile_fwsup {
*
* @BRCMF_PROFILE_FWAUTH_NONE: no firmware authenticator
* @BRCMF_PROFILE_FWAUTH_PSK: authenticator for WPA/WPA2-PSK
+ * @BRCMF_PROFILE_FWAUTH_SAE: authenticator for SAE
*/
enum brcmf_profile_fwauth {
BRCMF_PROFILE_FWAUTH_NONE,
- BRCMF_PROFILE_FWAUTH_PSK
+ BRCMF_PROFILE_FWAUTH_PSK,
+ BRCMF_PROFILE_FWAUTH_SAE
};
/**
--
2.25.0