2020-09-10 23:58:52

by James Prestwood

[permalink] [raw]
Subject: [RFC 0/1] Hwsim crash when receiving cloned frame

I am unsure if this is the proper way to fix this problem since it
ends up just dropping the frame when this happens. If 'channel'
*should* be initialized by the time we are receiving frames then
there may be a race somewhere. If its functionally ok for 'channel'
to be NULL, then maybe this fix is alright.

I realize it had been suggested to provide a decoded crash with
a debuggable kernel, but I really dont see how that could provide
any additional information above what is here. Because of this I
sent as an RFC and we can discuss further if needed.


James Prestwood (1):
mac80211_hwsim: fix crash when receiving frame

drivers/net/wireless/mac80211_hwsim.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--
2.26.2


2020-09-10 23:58:52

by James Prestwood

[permalink] [raw]
Subject: [RFC 1/1] mac80211_hwsim: fix crash when receiving frame

This crash has rarely happened to me on bare metal, but when running
in a virtual environment it happens much more frequently. It would
appear that the mac80211_hwsim_data (data2) obtained from
get_hwsim_data_ref_from_addr() is not fully initialized. When the
crash happens the 'channel' member (ieee80211_channel*) is NULL. This
is not checked for and eventually dereferenced which causes the
segmentation fault.

The actual dereference happens around line 3536 (as of 5.8) in this
if statement for checking if the frame is offchannel:

if (rx_status.freq != data2->channel->center_freq &&
(!data2->tmp_chan ||
rx_status.freq != data2->tmp_chan->center_freq)) {
mutex_unlock(&data2->mutex);
goto out;
}

Below is the crash:

[ 1335.541174] CPU: 0 PID: 982 Comm: hwsim Not tainted 5.8.0 #1
[ 1335.553946] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.13.0-2.fc32 04/01/2014
[ 1335.588370] RIP: 0010:hwsim_cloned_frame_received_nl+0x141/0x2c0
[ 1335.633025] Code: 00 00 00 8b 50 04 0f b7 44 24 1c 89 d1 66 25 00 e0
81 e2 ff 1f 00 00 66 81 e1 ff 1f 09 c8 66 89 44 24 1c 48 8b 83 18 18 00
00 <39> 50 04 74 19 48 8b 83 18 10 00 00 48 85 c0 0f 84 4f 01 00 00 39
[ 1335.681665] RSP: 0018:ffffa178405cbbe0 EFLAGS: 00010206
[ 1335.703231] RAX: 0000000000000000 RBX: ffff9a2eca6dde60 RCX:
000000000000096c
[ 1335.712436] RDX: 000000000000096c RSI: 0000000000000006 RDI:
ffff9a2eca6df690
[ 1335.745603] RBP: ffff9a2eca68b800 R08: ffff9a2eca709c18 R09:
00000000000000c0
[ 1335.776576] R10: ffff9a2eca64e400 R11: ffffffff846dacb0 R12:
ffffa178405cbc50
[ 1335.812124] R13: ffff9a2eca6df690 R14: ffff9a2eca709c24 R15:
ffffffff84b10b40
[ 1335.820314] FS: 00007f6317b0d640(0000) GS:ffff9a2ecb800000(0000)
knlGS:0000000000000000
[ 1335.856293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1335.868371] CR2: 0000000000000004 CR3: 000000000b5fa001 CR4:
0000000000060ef0
[ 1335.906576] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1335.921470] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 1335.952264] Call Trace:
[ 1335.957465] genl_rcv_msg+0x19b/0x2f0
[ 1335.963895] ? genl_family_rcv_msg_attrs_parse.isra.0+0xd0/0xd0
[ 1335.976278] netlink_rcv_skb+0x42/0x100
[ 1335.991219] genl_rcv+0x1f/0x30
[ 1336.002191] netlink_unicast+0x1f4/0x2c0
[ 1336.036764] netlink_sendmsg+0x220/0x450
[ 1336.041537] sock_sendmsg+0x59/0x60
[ 1336.049155] __sys_sendto+0xe9/0x150
[ 1336.060180] ? do_epoll_wait+0x220/0x580
[ 1336.068490] __x64_sys_sendto+0x20/0x30
[ 1336.077108] do_syscall_64+0x3e/0x70
[ 1336.089408] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1336.106558] RIP: 0033:0x7f6317a44de0
[ 1336.127514] Code: c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca
64 8b 04 25 18 00 00 00 85 c0 75 1d 45 31 c9 45 31 c0 b8 2c 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 68 c3 0f 1f 80 00 00 00 00 55 48 83 ec 20 48
[ 1336.196097] RSP: 002b:00007ffe55b8bb88 EFLAGS: 00000246 ORIG_RAX:
000000000000002c
[ 1336.221389] RAX: ffffffffffffffda RBX: 0000000001f8e740 RCX:
00007f6317a44de0
[ 1336.238485] RDX: 00000000000000d0 RSI: 0000000001f9fc00 RDI:
0000000000000004
[ 1336.273075] RBP: 0000000001f8eb80 R08: 0000000000000000 R09:
0000000000000000
[ 1336.291910] R10: 0000000000000000 R11: 0000000000000246 R12:
00007ffe55b8bbe0
[ 1336.323480] R13: 00007ffe55b8bbdc R14: 0000000001f8ec00 R15:
0000000000000000
[ 1336.340154] Modules linked in:
[ 1336.363292] CR2: 0000000000000004
[ 1336.388283] ---[ end trace 9fe6dbc18b5d98f1 ]---
[ 1336.393855] RIP: 0010:hwsim_cloned_frame_received_nl+0x141/0x2c0
[ 1336.401009] Code: 00 00 00 8b 50 04 0f b7 44 24 1c 89 d1 66 25 00 e0
81 e2 ff 1f 00 00 66 81 e1 ff 1f 09 c8 66 89 44 24 1c 48 8b 83 18 18 00
00 <39> 50 04 74 19 48 8b 83 18 10 00 00 48 85 c0 0f 84 4f 01 00 00 39
[ 1336.466208] RSP: 0018:ffffa178405cbbe0 EFLAGS: 00010206
[ 1336.486609] RAX: 0000000000000000 RBX: ffff9a2eca6dde60 RCX:
000000000000096c
[ 1336.498722] RDX: 000000000000096c RSI: 0000000000000006 RDI:
ffff9a2eca6df690
[ 1336.540164] RBP: ffff9a2eca68b800 R08: ffff9a2eca709c18 R09:
00000000000000c0
[ 1336.554221] R10: ffff9a2eca64e400 R11: ffffffff846dacb0 R12:
ffffa178405cbc50
[ 1336.572482] R13: ffff9a2eca6df690 R14: ffff9a2eca709c24 R15:
ffffffff84b10b40
[ 1336.589609] FS: 00007f6317b0d640(0000) GS:ffff9a2ecb800000(0000)
knlGS:0000000000000000
[ 1336.628275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1336.648020] CR2: 0000000000000004 CR3: 000000000b5fa001 CR4:
0000000000060ef0
[ 1336.657632] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1336.694036] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
---
drivers/net/wireless/mac80211_hwsim.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 1356e8cbe617..c6a5987e9933 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3506,7 +3506,7 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2,
skb_put_data(skb, frame_data, frame_data_len);

data2 = get_hwsim_data_ref_from_addr(dst);
- if (!data2)
+ if (!data2 || !data2->channel)
goto out;

if (!hwsim_virtio_enabled) {
--
2.26.2

2020-09-17 09:47:11

by Johannes Berg

[permalink] [raw]
Subject: Re: [RFC 1/1] mac80211_hwsim: fix crash when receiving frame

On Thu, 2020-09-10 at 16:57 -0700, James Prestwood wrote:
> This crash has rarely happened to me on bare metal, but when running
> in a virtual environment it happens much more frequently. It would
> appear that the mac80211_hwsim_data (data2) obtained from
> get_hwsim_data_ref_from_addr() is not fully initialized. When the
> crash happens the 'channel' member (ieee80211_channel*) is NULL. This
> is not checked for and eventually dereferenced which causes the
> segmentation fault.

Seems reasonable to me. I guess data2 is somehow getting packets
delivered but never even started operating.

johannes